Beko GNE V 222S, GNE V 220 X, GNE V 220 S, GNE V 222 X User manual [EN,FR,DE,NL,PT,AR,UK]

GNE V 222S

GNE V 220 X

GNE V 220 S

GNE V 222 X

Refrigerator

Réfrigérateur

Gefrierschrank

Koelkast

Frigorífico

Холодильники

Please read this user manual first!

Dear Customer,

We hope that your product, which has been produced in modern plants and checked under the most meticulous quality control procedures, will provide you an effective service.

Therefore, read this entire user manual carefully before using the product and keep it as a reference. If you handover the product to someone else, give the user manual as well.

The user manual will help you use the product in a fast and safe way.

•Read the manual before installing and operating the product.

•Make sure you read the safety instructions.

•Keep the manual in an easily accessible place as you may need it later.

•Read the other documents given with the product.

Remember that this user manual is also applicable for several other models. Differences between models will be identified in the manual.

Explanation of symbols

Throughout this user manual the following symbols are used:

CImportant information or useful tips.

AWarning against dangerous conditions for life and property.

BWarning against electric voltage.

CONTENTS

1 The refrigerator	3
2 Important Safety Warnings 4
Intended use........................................	4
General safety.....................................	4
For products with a water dispenser;....	6
Child safety..........................................	6
Compliance with WEEE Directive and
Disposing of the Waste Product: ..........	6
Package information.............................	7
HCA warning........................................	7
Things to be done for energy saving.....	7
Recommendations for the fresh food
compartment........................................	8
3 Installation	9
Points to be considered when re-
transporting your refrigerator.................	9
Before operating your refrigerator..........	9
Electric connection...............................	9
Changing the illumination lamp ..........	10
Disposing of the packaging.................	10
Disposing of your old refrigerator........	10
Placing and Installation.......................	10
Floor balance adjustment....................	11
Adjusting the gap between the upper
door...................................................	13
4 Preparation	14

5 Using your refrigerator	15
Indicator Panel...................................	15
Setting the fridge compartment
temperature........................................	16
Setting the freezer compartment
temperature........................................	16
Fast Freeze function...........................	16
Quick cool function.............................	17
Egg tray.............................................	17
Sliding Body Shelves..........................	17
Multi-purpose Shelf, Canned Drink and
Shelter................................................	18
Blue light............................................	18
Crisper humidity control sliders...........	18
Ion: ....................................................	18
Recommendations for preservation of
frozen food.........................................	19
Defrosting...........................................	19
Replacing the Interior Light Bulb.........	19
Using the Icematic..............................	22
Chiller compartment...........................	22
Water Dispenser.................................	23
*optional.............................................	23
Description and cleaning of odor filter: 25.
6 Maintenance and cleaning26
Protection of plastic surfaces .............	26
7 Recommended solutions for
the problems	27

2 EN

1	The refrigerator
		1		2
					3
					*4
	*21				5
					*6
					7
	*22				8
					9
					*10
	*21				*23
					24
					25
	20
					12
	*19				*11
					13
					14
	15	17	*18	*16	15

1.	Freezer compartment	14.Crisper cover
2.	Fridge compartment	15.Adjustable front legs
3.	Fridge compartment interior light	16.Blue light
4.	Butter & Cheese shelf	17.Ventilation lid
5.	Fan	18.Chiller compartment
6.	Ioniser	19.Freezer compartment drawers
7.	Fridge compartment glass shelves	20.Freezer Compartment glass shelves
8.	Egg tray	21.Icematic
9.	Fridge compartment door racks	22.Freezer compartment interior light
10.Wine cellar		23.Shelter
11.Bottle holder		24.Multi-purpose shelf
12.Bottle shelves		25.Water Dispenser
13.Crisper compartments		* OPTIONAL

CFigures that take place in this instruction manual are schematic and may not correspond exactly with your product. If the subject parts are not included in the product you have purchased, then it is valid for other models.

3 EN

	2	Important Safety Warnings
	Please review the following		• For products with a freezer
	information. Failure to observe this		compartment; Do not put bottled and
	information may cause injuries or		canned liquid beverages in the freezer
	material damage. Otherwise, all		compartment. Otherwise, these may
	warranty and reliability commitments		burst.
	will become invalid.		• Do not touch frozen food by hand;
	The service life of your product is 10
			they may stick to your hand.
	years. During this period, original spare		• Unplug your refrigerator before
	parts will be available to operate the		cleaning or defrosting.
	product properly.
	Intended use		• Vapor and vaporized cleaning
	This product is intended to be used		materials should never be used in
			cleaning and defrosting processes of
	• indoors and in closed areas such as		your refrigerator. In such cases, the
			vapor may get in contact with the
	homes;
			electrical parts and cause short circuit
	• in closed working environments such
			or electric shock.
	as stores and offices;
			• Never use the parts on your
	• in closed accommodation areas such
			refrigerator such as the door as a

as farm houses, hotels, pensions.	means of support or step.
• It should not be used outdoors.	• Do not use electrical devices inside
	the refrigerator.

General safety

•When you want to dispose/scrap the product, we recommend you to consult the authorized service in

order to learn the required information and authorized bodies.

•Consult your authorized service for all your questions and problems related to the refrigerator. Do not intervene or let someone intervene to the refrigerator without notifying the authorised services.

•For products with a freezer compartment; Do not eat cone ice cream and ice cubes immediately after you take them out of the freezer

compartment! (This may cause
frostbite in your mouth.)	4

•Do not damage the parts, where the refrigerant is circulating, with

drilling or cutting tools. The refrigerant that might blow out when the gas channels of the evaporator, pipe extensions or surface coatings are punctured causes skin irritations and eye injuries.

•Do not cover or block the ventilation holes on your refrigerator with any material.

•Electrical devices must be repaired by only authorised persons. Repairs performed by incompetent persons create a risk for the user.

EN

•In case of any failure or during a maintenance or repair work,

disconnect your refrigerator’s mains supply by either turning off the relevant fuse or unplugging your appliance.

•Do not pull by the cable when pulling off the plug.

•Place the beverage with higher proofs tightly closed and vertically.

•Never store spray cans containing flammable and explosive substances in the refrigerator.

•Do not use mechanical devices or other means to accelerate the

defrosting process, other than those recommended by the manufacturer.

•This product is not intended to be used by persons with physical, sensory or mental disorders or unlearned or inexperienced people (including children) unless they are attended by a person who will be responsible for their safety or who will instruct them accordingly for use of the product

•Do not operate a damaged refrigerator. Consult with the service agent if you have any concerns.

•Electrical safety of your refrigerator shall be guaranteed only if the earth system in your house complies with standards.

•Exposing the product to rain, snow, sun and wind is dangerous with respect to electrical safety.

•Contact authorized service when there is a power cable damage to avoid danger.

•Never plug the refrigerator into the wall outlet during installation. Otherwise, risk of death or serious injury may arise.

•This refrigerator is intended for only storing food items. It must not be used for any other purpose.

•Label of technical specifications is located on the left wall inside the refrigerator.

•Never connect your refrigerator to electricity-saving systems; they may damage the refrigerator.

•If there is a blue light on the refrigerator, do not look at the blue light with optical tools.

•For manually controlled refrigerators, wait for at least 5 minutes to start the refrigerator after power failure.

•This operation manual should be handed in to the new owner of the product when it is given to others.

•Avoid causing damage on power cable when transporting the refrigerator. Bending cable may cause fire. Never place heavy objects on power cable.

•Do not touch the plug with wet hands when plugging the product.

5 EN

•Do not plug the refrigerator if the wall outlet is loose.

•Water should not be sprayed on inner or outer parts of the product for safety purposes.

•Do not spray substances containing inflammable gases such as propane gas near the refrigerator to avoid fire and explosion risk.

•Never place containers filled with water on top of the refrigerator; in the event of spillages, this may cause electric shock or fire.

•Do not overload the refrigerator with food. If overloaded, the food items may fall down and hurt you and damage refrigerator when you open the door.

•Never place objects on top of the refrigerator; otherwise, these objects may fall down when you open or close the refrigerator's door.

•As they require a precise temperature, vaccines, heat-sensitive medicine and scientific materials and etc. should not be kept in the refrigerator.

•If not to be used for a long time, refrigerator should be unplugged. A possible problem in power cable may cause fire.

•The plug's tip should be cleaned regularly with a dry cloth; otherwise, it may cause fire.

•Refrigerator may move if adjustable legs are not properly secured on the floor. Properly securing adjustable legs on the floor can prevent the refrigerator to move.

•When carrying the refrigerator, do not hold it from door handle. Otherwise, it may be snapped.

•When you have to place your product next to another refrigerator or freezer, the distance between devices should be at least 8cm. Otherwise, adjacent side walls may be humidified.

For products with a water dispenser;

Pressure of water mains should be minimum 1 bar. Pressure of water mains should be maximum 8 bars.

• Use only potable water.

Child safety

•If the door has a lock, the key should be kept away from reach of children.

•Children must be supervised to prevent them from tampering with the product.

Compliance with WEEE Directive and Disposing of the Waste Product:

This product complies

with EU WEEE Directive (2012/19/EU). This product

bears a classification symbol for waste electrical and electronic equipment

.\(WEEE

This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. Therefore, do not dispose the product with normal domestic

6 EN

waste at the end of its service life. Take it to a collection point for the recycling of electrical and electronic equipment. Please consult your local authorities

to learn the nearest collection point. Help protect the environment and natural resources by recycling used products. For children's safety, cut the power cable and break the locking mechanism of the door, if any, so

that it will be non-functional before disposing of the product.

Package information

Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.

Do not forget...

Any recycled substance is an indispensable matter for nature and our national asset wealth.

If you want to contribute to the re-evaluation of the packaging materials, you can consult to your environmentalist organizations or the municipalities where you are located.

HCA warning

If your product's cooling system contains R600a:

This gas is flammable. Therefore, pay attention to not damaging the cooling system and piping during usage and transportation. In the event of damage, keep your product away from potential fire sources that can cause the product catch a fire and ventilate the room in which the unit is placed.

Ignore this warning if your product's cooling system contains R134a.

Type of gas used in the product is stated in the type label which is on the left wall inside the refrigerator.

Never throw the product in fire for disposal.

Things to be done for energy saving

•Do not leave the doors of your refrigerator open for a long time.

•Do not put hot food or drinks in your refrigerator.

•Do not overload your refrigerator so that the air circulation inside of it is not prevented.

•Do not install your refrigerator under direct sunlight or near heat emitting appliances such as ovens, dishwashers or radiators. Keep your refrigerator at least 30cm away from heat emitting sources and at least 5cm from electrical ovens.

•Pay attention to keep your food in closed containers.

7 EN

Recommendations for the fresh food compartment

*optional

•Do not allow the food to touch the temperature sensor in fresh food compartment. To allow the fresh food compartment keep its ideal storage temperature, sensor must not be hindered by food.

•Do not place hot foods in the product.

	MILK
	juice	temperature
	etc.
		sensor

•For products with a freezer compartment; You can store maximum amount of food items in the freezer when you remove the shelf or drawer of the freezer. Energy consumption value stated for your refrigerator has been determined

by removing freezer shelf or drawer and under maximum load. There is no harm to use a shelf or drawer

according to the shapes and size of food to be frozen.

•Thawing frozen food in fridge compartment will both provide energy saving and preserve the food quality.

food	temperature
	sensor

8 EN

	3 Installation
	C Please remember that the	3. Insert the 2 plastic wedges onto the
	manufacturer shall not be held liable if	rear ventilation as illustrated in the
	the information given in the instruction	following figure. Unscrew the existing
	manual is not observed.	ones and use the screws given in the
	Points to be considered	same bag of wedges. Plastic wedges
		will provide the required distance
	when re-transporting your
		between your refrigerator and the wall
	refrigerator
		in order to allow the air circulation.
	1. Your refrigerator must be
	emptied and cleaned prior to any
	transportation.
	2. Shelves, accessories, crisper and etc.
	in your refrigerator must be fastened
	securely by adhesive tape against any
	jolt before repackaging.
	3. Packaging must be tied with thick
	tapes and strong ropes and the
	rules of transportation printed on the
	package must be followed.
	C Always remember...
	Every recycled material is an
	indispensable source for the nature	4. Plug the refrigerator into the wall
	and for our national resources.
		outlet. When the door is open the
	If you wish to contribute to recycling	respective interior light will come on.
	the packaging materials, you can	5. You will hear a noise as the
	get further information from the
		compressor starts up. The liquid and
	environmental bodies or local
		gases sealed within the refrigeration
	authorities.
		system may also give rise to noise,
	Before operating your	even if the compressor is not running
	refrigerator	and this is quite normal.
	Before starting to use your refrigerator	6. Front edges of the refrigerator may
	check the following:	feel warm. This is normal. These
	1. Is the interior of the refrigerator dry	areas are designed to be warm to
		avoid condensation.
	and can the air circulate freely in the
		Electric connection
	rear of it?
	2. Clean the interior of the refrigerator as	Connect your refrigerator to a
	recommended in the “Maintenance	grounded socket which is being
	and cleaning” section.	protected by a fuse with the
		appropriate capacity.
	9	EN

Important:

B The connection must be in compliance with national regulations.

B The power cable plug must be easily accessible after installation.

B The specified voltage must be equal to your mains voltage.

B Extension cables and multiway plugs must not be used for connection.

B A damaged power cable must be replaced by a qualified electrician.

B The appliance must not be operated before it is repaired! There is danger of electric shock!

Disposing of the packaging

AThe packing materials may be dangerous for children. Keep the packing materials out of the reach of children or dispose them of by classifying them in accordance with the waste instructions. Do not

dispose them of along with the normal household waste.

The packing of your refrigerator is produced from recyclable materials.

Disposing of your old refrigerator

Dispose of your old machine without giving any harm to the environment.

A You may consult your authorized dealer or waste collection center of your municipality about the disposal

of your refrigerator.

A Before disposing of your refrigerator, cut out the electric plug and, if there are any locks on the door, make them inoperable in order to protect children against any danger.

Placing and Installation

B Caution: Never plug the refrigerator into the wall outlet during installation. Otherwise, risk of death or serious injury may arise.

A If the entrance door of the room where the refrigerator will be installed is not wide enough for the refrigerator to pass through, than call the authorised service to have them remove the doors of your refrigerator and pass it sideways through the door.

1.Install your refrigerator to a place that allows ease of use.

2.Keep your refrigerator away from heat sources, humid places and direct sunlight.

3.There must be appropriate air ventilation around your refrigerator in order to achieve an efficient operation. If the refrigerator is to be placed in a recess in the wall, there must be at least 5 cm distance with the ceiling and at least 5 cm with the wall.

If the floor is covered with a carpet, your product must be elevated 2.5 cm from the floor.

4. Place your refrigerator on an even

floor surface to prevent jolts.

Changing the illumination lamp

To change the Bulb/LED used for illumination of your refrigerator, call your Authorized Service.

10 EN

Floor balance adjustment

If your refrigerator is unbalanced;

You can balance your refrigerator by turning the front legs of it as illustrated in the figure. (See Figure A) The corner where the leg exists is lowered when you turn in the direction of black arrow and raised when you turn in the opposite direction. Taking help from someone to slightly lift the refrigerator will facilitate this process.

Door height adjustment

In case there is a problem with the alignment of the doors with respect to each other, they may be re-aligned vertically in the order given below. Ensure that door shelves are empty when adjusting the door height.

(A)

1. Remove the lower ventilation cover by unscrewing its screws as shown in the figure below. (See Figure B)

2. Loosen the three screws of the hinges of the lower door, which you wish to escalate, with the help of a screwdriver as shown in the figure below. (Do not remove completely)

(See Figure C)

2

(C)

		4
1	2	3	2

(B)

11 EN

•If the freezer compartment door is lower than the fridge compartment door, bring them to the same level by turning the turning the elevation screw on the freezer compartment side in the direction of arrow using a M6 Allen wrench as illustrated in Figure D.

•If the freezer compartment door is higher than the fridge compartment door, bring them to the same level by turning the elevation screw on the freezer compartment side in the reverse direction of arrow using a M6

Allen wrench as illustrated in Figure D.

After bringing the doors to the same level by elevating the front part with the aid of the elevation screws,ensure the doors of the refrigerator shall close properly. If the doors do not close properly, this might adversely affect the efficiency of the refrigerator.

(D)

12 EN

Adjusting the gap between the upper door

C You can adjust the gap between the fridge compartment doors as illustrated in the figures.

Door shelves should be empty when adjusting the door height.

Because of being wires in the hinge cover of the freezer door, switch off the refrigerator power before removing hinge covers and this situation should be made to take care.

C Using a screwdriver, remove the screw of upper hinge cover of the door you want to adjust.

C Adjust the door appropriately as you desire by loosing the screws.

C Fix the door you have adjusted by tightening the screws without changing the position of the door.

C Replace the hinge cover and fix with the screw.

13 EN

4 Preparation

CYour refrigerator should be installed at least 30 cm away from heat sources such as hobs, ovens, central heater and stoves and at least 5 cm away from electrical ovens and should not be located under direct sunlight.

CThe ambient temperature of the room where you install your

refrigerator should at least be 10°C. Operating your refrigerator under cooler conditions than this is not recommended with regard to its efficiency.

CPlease make sure that the interior of your refrigerator is cleaned thoroughly.

CIf two refrigerators are to be installed side by side, there should be at least 2 cm distance between them.

CWhen you operate your refrigerator for the first time, please observe the following instructions during the initial six hours.

-The door should not be opened frequently.

-It must be operated empty without any food in it.

-Do not unplug your refrigerator. If

a power failure occurs out of your control, please see the warnings in the “Recommended solutions for the problems” section.

COriginal packaging and foam materials should be kept for future transportations or moving.

14 EN

5 Using your refrigerator

Indicator Panel

Indicator panel aids in using your refrigerator with its audio and visual functions.

This panel allows you to start and use all functions of your refrigerator without opening its doors since the panel is located on the outer side of the freezer compartment door.

3

7

14

11

8

	1 15 2										4				5			9	12			13		6	10
1.	Freezer compartment temperature																					Setting Indicator
	setting indicator																		9.			Error indicator
2.	Freezer compartment temperature																		10.Fridge compartment temperature
	setting button
																						change indicator
3.	Fast Freeze indicator																		11.Quick cool indicator
4.	Fast Freeze Button																		12.Quick cool button
5.	Freezer door open indicator																		13.Fridge compartment door open
6.	Fridge compartment temperature																					indicator
	button																		14.Economy mode
7.	High humidity indicator																		15.Freezer compartment temperature
8.	Fridge Compartment Temperature																					change indicator

CFigures that take place in this instruction manual are schematic and may not correspond exactly with your product. If the subject parts are not included in the product you have purchased, then it is valid for other models.

15 EN

Setting the fridge compartment temperature

When you want to change your refrigerator’s temperature settings, you need to press the “Fridge compartment temperature adjustment button” to make the fridge compartment temperature adjustment. The fridge compartment temperature can be set to cooler degrees every time you press on the button (such as 8, 6, 4, 2, 8, …).

Setting the freezer compartment temperature

When you want to change your refrigerator’s temperature settings, you need to press the “Freezer compartment temperature adjustment button” to make the freezer compartment temperature adjustment. The freezer compartment temperature can be set to cooler degrees every time you press on the button (such as, -18, -20, -22, -24, -18, …).

Fast Freeze function

You can use this function of your refrigerator to rapidly freeze the food you put into the freezer compartment for the first time or to obtain ice more quickly. If you want to keep your food frozen for a long period, first apply the fast freeze function to them. Fast freeze is the healthiest way of keeping the food for a long time. Temperature of your refrigerator’s freezer compartment drops down to -27°C during fast freeze process. You must read Part 4 carefully before applying

fast freeze process to your food.

16

When you want to use the “Fast Freeze” function, press the fast freeze button. Fast freeze indicator lights up when you press the button. Freezer Compartment Temperature Adjustment Indicator turns to -27°C. While fast freeze function is activated, this compartment reaches colder degrees than the adjusted values and all of

the freezer compartment temperature indicators may light up. Fast Freeze function lasts for maximum 24 hours. Your refrigerator will automatically exit the fast freeze mode once the fast freeze process is completed, fast freeze indicator lamp will go off and the refrigerator will turn back to the previously adjusted temperatures. Freezer compartment temperature indicators will gradually go off until the

adjusted temperature value is attained.

If you have unintentionally switched your refrigerator to fast freeze mode or if you want to cancel the process, just press the “Fast Freeze” button again to exit the fast freeze mode.

If you want to freeze large amounts of fresh food, press the fast freeze button 24 hours before putting the food into the freezer compartment.

EN

Quick cool function

This function can be used for food placed in the fridge compartment and desired to be cooled down rapidly. Press quick cool button to activate the function. During this process, the quick cool indicator will light up and fridge compartment temperature adjustment indicator will turn into 1°C. While

quick cool function is activated, this compartment reaches colder degrees than the adjusted values. Meanwhile, all of the temperature indicators of the fridge compartment may light up. Quick cool process will take about 2

hours and at the end of this period, the quick cool indicator lamp will go off, and the refrigerator will turn back to the previously adjusted temperatures.

Egg tray

You can install the egg holder to the desired door or body shelf.

Never store the egg holder in the freezer compartment

Sliding Body Shelves

Sliding body shelves can be pulled by slightly lifting up from the front and moved back and forth. They come to a stop point when pulled towards front to allow you reach the foods placed at the back of the shelf; when it is pulled after slightly lifted upwards at the second stop point, the body shelf will be released.

The shelf should be hold tightly from the bottom as well in order to prevent it from tipping over. The body shelf is placed on the rails at the sides of the refrigerator body by bringing it to one lower or one upper level.

The body shelf should be pushed backwards to seat it completely.

1 2

3

4

17 EN

Blue light

Foodstuff stored in the crispers that are enlightened with a blue light continue their photosynthesis by means of the wavelength effect of blue light and thus, preserve their freshness and increase their vitamin content.

Multi-purpose Shelf, Canned Drink and Shelter

(May not be available in some models.)

•You may use your multi-purpose shelf for foods in appropriate dimensions as seen in the figure.

•You may use this compartment to preserve foods and drinks that can fit into the shelter. (Ketchup, mayonnaise, etc.)

•You may use the canned drink shelf by laying your beverages horizontally.

Crisper humidity control sliders

Crisper of your refrigerator is designed specially to keep your vegetables freshly without loosing their humidity. Cold air circulates basically around the crisper and the amount of the cold air passing through the crisper is controlled by the sliders on the front side of the crisper cover.

You can adjust the humidity control sliders to a suitable position according to the humidity and cooling condition of your food in the crisper.

If you want your food in the crisper to cool more, open the holes of the humidity control sliders and if you want them to cool less and keep their humidity for a longer time, close the holes.

Ion:

Air is ionized by means of the ionizer system in the fridge compartment air duct. Thanks to this system, air-borne bacteria and particles that cause odor are removed.

18 EN

Recommendations for preservation of frozen food

* OPTIONAL

• Prepacked commercially frozen food should be stored in accordance with the frozen food manufacturer's instructions for a ( 4 star) frozen food storage compartment.

• To ensure that the high quality supplied by the frozen food manufacturer and the food retailer is maintained, following points should be noted:

1.Put packets in the freezer as quickly as possible after purchase.

2.Ensure that contents are labelled and dated.

3. Make sure that the "Use By", "Best Before" dates on the packaging are not expired.

If there is a power failure do not open the freezer door. Even if the power failure lasts up to the time specified on Type Label (inside left of the refrigerator), frozen food will not be affected. In case the failure lasts

longer, the food must be checked and when necessary, must be consumed immediately or must be frozen after cooked.

Defrosting

The fridge and freezer compartments defrost automatically.

Replacing the Interior Light Bulb * OPTIONAL

Should the light fail to work, proceed as follows:

1. Switch off at the socket outlet and pull out the mains plug.

Remove all shelves and drawers for easy access.

2.Illumination covers in freezer and fridge sections are opened by pressing by hand; first release one side and then the other by pressing on the sides as shown in the figures.

3.First check that the bulb has not worked loose by ensuring that it

is screwed securely in the holder. Reinsert the plug and switch on. If the bulb works, reinstall the light cover by inserting the rear lug and pushing up to locate the front two lugs.

4.If the light still fails to work, switch off at the socket outlet and pull out the mains plug. Replace the bulb with a new 15 watt (max) screw cap E14 (SES) bulb.

5.Carefully dispose of the burnt-out light bulb immediately.

Replacement light bulb can easily be obtained from a good local electrical or DIY store.

19 EN

20 EN

Icematic

* When the Icematic water supply reservoir (1) is removed from its place in order to fill it up, it must be replaced within two minutes after it is filled with water. The nozzle of the system will open and the Icematic cells will be filled with water automatically as soon as the cartridge is seated in its place. Your ice will be ready approximately in two 2 hours.

•Do not remove the Icematic (2) from its seating to take ice.

•Turn the knobs on it clockwise as illustrated in the figure.

Ice cubes in the cells will fall down in to the ice bank (3) below.

•You may take out the ice bank and serve the ice cubes.

•If you wish, you may keep the ice cubes in the ice bank.

The ice bank is just for accumulating ice cubes. Do not put water in it. Otherwise, it will break.

About water supply reservoir

Remove the water supply reservoir and fill it up with water. After filled up with water, the reservoir must be pushed forward into its seating until a “click” sound is heard. If there is any ice in the reservoir, wait until it melts. Water supply reservoir has a capacity of approximately 290 ml.

2

3

21 EN

Using the Icematic

•Fill the Icematic with water and place it into its seat. Your ice will be ready approximately in two hours. Do not remove the Icematic from its seating to take ice.

•Turn the knobs on it clockwise by 90 degrees. Ice cubes in the cells will fall down into the ice storage container below.

•You may take out the ice storage container and serve the ice cubes.

•If you wish, you may keep the ice cubes in the ice storage container.

•The ice storage container is just for accumulating ice cubes. Do not freeze water in it. Otherwise, it may break.

(The illustrated figure is only an example and does not match exactly with your product.)

22

Chiller compartment

If you wish to use the storage container under the shelf as the Chiller compartment, the storage container under the shelf should be placed as shown in the picture.

Chiller compartments enable the foods to be frozen become ready for freezing. You can also use these

compartments to store your food at a temperature a few degrees below the fridge compartment.

You can increase the inner volume of your refrigerator by removing any of the chiller compartments. To do this, pull the compartment towards yourself; the compartment will lean against the stopper and stop. This compartment will be released when you lift it about 1 cm and pull it towards yourself.

EN

Water Dispenser

*optional

The water dispenser is a very useful feature allowing cold water on tap without opening the door of your refrigerator .As you will not have to open your refrigerator door frequently, you will have saved energy.

Using the water dispenser

Push the arm of the water dispenser with your glass. The dispenser will cease operating once you release the arm.

When operating the water dispenser, maximum flow can be obtained

by pressing the arm fully. Please remember that the amount of flow from the dispenser is subject to the degree you press the arm.

As the level of the water in your glass/ container rises, slightly lessen the pressure on the arm to prevent the overspill. If you slightly press the arm, the water will drip; this is quite normal and not a failure.

Filling the water dispenser's tank

Open the cover of the water tank as shown in the figure. Fill in the pure and clean drinking water. Close the cover.

To avoid flowing of water by mistake, we recommend you to lock the water dispenser .

23 EN

Warning!

•Do not fill the water tank with any other liquid except for water such as fruit juices, carbonated beverages or alcoholic drinks which are not

suitable to use in the water dispenser. Water dispenser will be irreparably damaged if these kinds of liquids are used. Warranty does not cover such usages. Some chemical substances and additives contained in these kinds of drinks/liquids may damage the water tank.

•Use clean and pure drinking water only.

•Capacity of the water tank is 2.2 Litres (3.8 pints); do not overfill.

•Push the arm of the water dispenser with a rigid glass. If you are using disposable plastic glasses, push the arm with your fingers from behind the glass.

1 2

1

3

Cleaning the water tank

Release the tank cover from the water tank by opening latches at both sides. Remove the water tank and clean with warm and clean water. Place the water tank to its seating, install the tank cover and close the latches.

Make sure that the parts removed (if any) during cleaning are properly attached to their original places.

Otherwise, water leakage may occur.

24 EN

Important:

Components of the water tank and water dispenser should not be washed in dishwasher.

Water tray

Water that dripped while using the water dispenser accumulates in the spillage tray. Take out the spillage tray by pulling it towards yourself and empty it regularly.

Take out the plastic strainer by pressing it on sides.

Take the water valve out of the water tank. When replacing it, make sure that the seal is in place.

Description and cleaning of odor filter:

*optional

Odor filter prevents unpleasant odor build-up in your refrigerator.

Pull the cover into which the odor filter is installed downwards from the front section and remove as illustrated. Leave the filter under sunlight for one day. Filter will be cleaned during this time. Install the filter back to its place.

Odor filter must be cleaned once in a year.

25 EN

6 Maintenance and cleaning

A Never use gasoline, benzene or similar substances for cleaning purposes.

B We recommend that you unplug the appliance before cleaning.

B Never use any sharp abrasive instrument, soap, household cleaner, detergent and wax polish for cleaning.

CUse lukewarm water to clean the cabinet of your refrigerator and wipe it dry.

CUse a damp cloth wrung out in a solution of one teaspoon of

bicarbonate of soda to one pint of water to clean the interior and wipe it dry.

B Make sure that no water enters the lamp housing and other electrical items.

B If your refrigerator is not going to be used for a long period of time, unplug the power cable, remove all food, clean it and leave the door ajar.

CCheck door seals regularly to ensure they are clean and free from food particles.

A To remove door racks, remove all the contents and then simply push the door rack upwards from the base.

ANever use cleaning agents or water that contain chlorine to clean the outer surfaces and chromium coated parts of the product. Chlorine causes corrosion on such metal surfaces.

Protection of plastic surfaces

CDo not put the liquid oils or oil-cooked meals in your refrigerator in unsealed containers as they damage the plastic surfaces of your refrigerator. In case of spilling or smearing oil on the plastic surfaces, clean and rinse the relevant part of the surface at once with warm water.

26 EN

7 Recommended solutions for the problems

Please review this list before calling the service. It might save you time and money. This list includes frequent complaints that are not arising from defective workmanship or material usage. Some of the features described here may not exist in your product.

The refrigerator does not operate.

•Is the refrigerator properly plugged in? Insert the plug to the wall socket.

•Is the fuse of the socket which your refrigerator is connected to or the main fuse blown out? Check the fuse.

Condensation on the side wall of the fridge compartment (MULTIZONE, COOL CONTROL and FLEXI ZONE).

•Very cold ambient conditions. Frequent opening and closing of the door.

Highly humid ambient conditions. Storage of food containing liquid in open containers. Leaving the door ajar. Switching the thermostat to a colder degree.

•Decreasing the time the door left open or using it less frequently.

•Covering the food stored in open containers with a suitable material.

•Wipe the condensation using a dry cloth and check if it persists.

Compressor is not running

•Protective thermic of the compressor will blow out during sudden power failures or plug-out plug-ins as the refrigerant pressure in the cooling system of the refrigerator has not been balanced yet. Your refrigerator will start running approximately after 6 minutes. Please call the service if the refrigerator does not startup at the end of this period.

•The fridge is in defrost cycle. This is normal for a full-automatically defrosting refrigerator. Defrosting cycle occurs periodically.

•Your refrigerator is not plugged into the socket. Make sure that the plug is properly fit into the socket.

•Are the temperature adjustments correctly made?

•Power might be cut off.

27 EN

The fridge is running frequently or for a long time.

•Your new product may be wider than the previous one. This is quite normal.

Large refrigerators operate for a longer period of time.

•The ambient room temperature may be high. This is quite normal.

•The refrigerator might have been plugged in recently or might have been loaded with food. Cooling down of the refrigerator completely may last for a couple of hours longer.

•Large amounts of hot food might have been put in the refrigerator recently.

Hot food causes longer running of the refrigerator until they reach the safe storage temperature.

•Doors might have been opened frequently or left ajar for a long time. The warm air that has entered into the refrigerator causes the refrigerator to run for longer periods. Open the doors less frequently.

•Freezer or fridge compartment door might have been left ajar. Check if the doors are tightly closed.

•The refrigerator is adjusted to a very low temperature. Adjust the refrigerator temperature to a warmer degree and wait until the temperature is achieved.

•Door seal of the fridge or freezer may be soiled, worn out, broken or not properly seated. Clean or replace the seal. Damaged/broken seal causes the refrigerator to run for a longer period of time in order to maintain the current temperature.

Freezer temperature is very low while the fridge temperature is sufficient.

•The freezer temperature is adjusted to a very low temperature. Adjust the freezer temperature to a warmer degree and check.

Fridge temperature is very low while the freezer temperature is sufficient.

•The fridge temperature might have been adjusted to a very low temperature. Adjust the fridge temperature to a warmer degree and check.

Food kept in the fridge compartment drawers are freezing.

•The fridge temperature might have been adjusted to a very low temperature. Adjust the fridge temperature to a warmer degree and check.

Temperature in the fridge or freezer is very high.

•The fridge temperature might have been adjusted to a very high degree.

Fridge adjustment has an effect on the temperature of the freezer. Change the temperature of the fridge or freezer until the fridge or freezer temperature reaches to a sufficient level.

•Doors might have been opened frequently or left ajar for a long time; open them less frequently.

•Door might have been left ajar; close the door completely.

•Large amount of hot food might have been put in the refrigerator recently.

Wait until the fridge or freezer reaches the desired temperature.

•The refrigerator might have been plugged in recently. Cooling down of the refrigerator completely takes time.

28 EN

The operation noise increases when the refrigerator is running.

•The operating performance of the refrigerator may change due to the changes in the ambient temperature. It is normal and not a fault.

Vibrations or noise.

•The floor is not even or it is weak. The refrigerator rocks when moved slowly. Make sure that the floor is strong enough to carry the refrigerator, and level.

•The noise may be caused by the items put onto the refrigerator. Items on top of the refrigerator should be removed.

There are noises coming from the refrigerator like liquid spilling or spraying.

•Liquid and gas flows happen in accordance with the operating principles of your refrigerator. It is normal and not a fault.

There is a noise like wind blowing.

•Fans are used in order to cool the refrigerator. It is normal and not a fault.

Condensation on the inner walls of refrigerator.

•Hot and humid weather increases icing and condensation. It is normal and not a fault.

•Doors might have been left ajar; make sure that the doors are closed fully.

•Doors might have been opened frequently or left ajar for a long time; open them less frequently.

Humidity occurs on the outside of the refrigerator or between the doors.

•There might be humidity in the air; this is quite normal in humid weather.

When the humidity is less, condensation will disappear.

Bad odor inside the refrigerator.

•Inside of the refrigerator must be cleaned. Clean the inside of the refrigerator with a sponge, lukewarm water or carbonated water.

•Some containers or package materials might cause the smell. Use a different container or different brand packaging material.

The door is not closing.

•Food packages may prevent the door's closing. Replace the packages that are obstructing the door.

•The refrigerator is not completely upright on the floor and rocking when slightly moved. Adjust the elevation screws.

•The floor is not level or strong. Make sure that the floor is level and capable to carry the refrigerator.

Crispers are stuck.

•The food might be touching the ceiling of the drawer. Rearrange food in the drawer.

29 EN