Loading...
Document Scanner
User’s Manual
Regulatory model: DL-1409B
Avision Inc.
User’s Manual
Trademarks
Microsoft is a U.S. registered trademark of Microsoft Corporation.
Windows, Windows Vista, Windows 7, Windows 8, and Windows 10 are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Energy Star® is a registered trademark of the U.S. government.
IBM, IBM PC are registered trademarks of International Business Machines Corp.
Other brands and product names herein are trademarks or registered trademarks of their respective holders.
Copyright
All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written permission of Avision Inc.
Material scanned by this product may be protected by governmental laws and other regulations, such as copyright laws, the customer is solely responsible for complying with all such laws and regulations.
Warranty
The information contained in this document is subject to change without notice.
Avision makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of fitness for a particular purpose.
Avision shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
ii
User’s Manual
Federal Communications Commission (FCC) compliance information statement
Part 15
The product has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received including interference that may cause undesired operation.
The FCC Class A limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual may cause harmful interference in which case the user will be required to correct the interference at his own expense.
iii
User’s Manual
European Union Regulatory Notice
Products bearing the CE marking comply with the following EU Directives:
Low Voltage Directive 2014/35/EC
EMC Directive 2014/30/EC
Restriction of the use of certain hazardous substances (RoHS) Directive 2011/65/EU
CE compliance of this product is valid if powered with the correct CE-marked AC adapter provide by Avision.
This product satisfies the Class A limits of EN55022, EN55024, safety requirements of EN 60950 and ROHS requirements of EN50581.
*This machine is certified as Class 1 LED product.
CE Warning
This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
iv
User’s Manual
Disposal of Waste Equipment by Users in Private Union
This symbol on the product or on its packaging indicates that the product can not be disposed of with your other household waste. Instead it should be sent to appropriate facilities for recovery and recycling in an effort to protect human health and the environment. Fore more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
As an ENERGY STAR® Partner, Avision Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
System Requirements
CPU: |
Intel® Core™ 2 Duo or higher |
Memory: |
32 bit: 2 GB |
|
64 bit: 4 GB |
Optical Drive: |
DVD-ROM Drive |
USB Port: |
USB port 2.0 (compatible with USB 1.1) |
Compatible |
Microsoft Windows XP(SP3), Windows Vista, |
Operating |
Windows 7, Windows 8 (32 bits/64 bits), |
System: |
Windows 10 (32 bits/64 bits) |
v
User’s Manual
Product Safety Guide
Please clearly read all these instructions, and follow all instructions and warnings before installing and using the device.
The following indications are used in this document to obviate any chance of accident or damage to you and/or the device.
WARNING |
Indicates potentially hazardous situations, which |
|
if instructions are not followed, could result in |
|
death or serious injury. |
|
|
CAUTION |
Indicates a potentially hazardous situation |
|
which, if instructions are not followed, may |
|
result in minor or moderate injury or damage to |
|
property. |
WARNING
Use only the AC power adapter that came with your device. Using any other AC power adapter could cause fire, electrical shock, or injury.
Use only the AC power cord and USB cable that came with your device and avoid abrasions, cuts, fraying, crimping, and kinking. Using any other AC power cord and USB cable could cause fire, electrical shock, or injury.
Do not place objects on top of the AC power cord, and do not allow the AC power adapter or the AC power cord to be stepped on or run over.
Place the device and its AC power adapter near an electrical outlet where the AC power adapter can easily be unplugged.
If you use an extension cord with the device, make sure that the total ampere rating of the devices plugged into the extension cord does not exceed the cord's ampere rating.
Place the device close enough to the computer so that the interface cable can easily reach between the device and the computer.
vi
User’s Manual
Do not place or store the device or its AC power adapter:
Outdoors
Near excessive dirt or dust, water, or heat sources
In locations subject to shocks, vibrations, high temperature or humidity, direct sunlight, strong light sources, or rapid changes in temperature or humidity
Do not use the device with wet hands.
Never disassemble, modify, or attempt to repair the AC power adapter, device, or device option by yourself, except as specifically explained in the device's documentation. This could cause fire, electrical shock, or injury.
Do not insert objects into any opening, as they may touch dangerous voltage points or short-out components. Beware of electrical shock hazards.
Unplug the device and the AC power adapter, and refer servicing to qualified service personnel under the following conditions:
The AC power adapter or plug is damaged.
Liquid has entered the device or the AC power adapter.
Object has entered the device or the AC power adapter.
The device or the AC power adapter has been dropped, or the case has been damaged.
The device or the AC power adapter does not operate normally (i.e. appearance of smoke, strange smell, odd noise, etc.), or exhibits a distinct change in performance
Unplug the device and the AC power adapter before cleaning.
vii
User’s Manual
CAUTION:
Do not locate the device on rackety or aslope tables. Do not locate the device on unstable surface. The device may fall down and this may result in injury.
Do not place heavy objects on the unit. It may cause unbalance and the device may fall down. This may result in injury.
Store the AC Power cord/USB cable bundled out of the reach of children to avoid the risk of injury.
Keep plastic bags bundled out of the reach of children or throw them away to avoid the danger of suffocation.
If you are not going to use the device for a long period, unplug the AC power adapter from the electrical outlet.
viii
User’s Manual
1.Introduction
Congratulations on your purchase of the high speed document image scanner. With this scanner, you can you scan your multi-page documents from the auto document feeder at a rated speed or scan irregular single-page document from the flatbed.
Before you install and operate the new scanner, please take a few minutes to read through this manual. It provides proper instructions for you to unpack, install, operate and maintain the scanner.
1.1 Package Items
The following figure indicates the package contents. Please check all the items against your checklist. If you do not receive all the items, please contact your authorized local dealer immediately.
1-1
User’s Manual
1 |
2 |
|
3 |
4 |
1.Scanner Main Unit
2.Quick Guide/CD
3.USB Cable
4.Power Adapter & Power Cord
Note:
1.Only use the AC adapter DA-48M24 by APD included in the machine. Using other AC adapters may damage the machine and void the warranty.
2.Please unpack the packing carefully, and check the contents against the checklist. If any items are missing or damaged, please contact your dealer immediately.
3.To access more service supports, visit www.avision.com to register your Avision’s product.
1-2
User’s Manual
1.2 Front View
|
|
Paper Width Switch |
Extension |
||
|
|
|
|
||
|
|
|
Paper Guide |
|
|
|
LCD Screen with |
|
ADF |
||
|
|
Paper Tray |
|||
Up/Down Buttons |
|
|
|||
|
|
Paper Guide |
|||
|
|
|
|
||
|
Paper Stopper |
Cancel Button |
|||
|
|
|
|
||
|
|
|
|
Scan Button |
|
|
|
|
|
Power Button |
|
|
|
|
Document Cover |
||
|
|
|
|
|
|
|
Part Name |
|
Function |
|
|
|
Extension |
|
Can be pulled out and adjusted to the |
||
|
|
|
size of the document being scanned. |
||
|
Paper Width |
|
Slide it up or down to fit your paper |
||
|
Switch |
|
size. |
|
|
|
ADF Paper Tray |
|
Load the document onto this part |
||
|
|
|
when scanning document. |
|
|
Paper Guides
Operation Panel
Adjusts to the width of the documents to prevent skewing of the scanned pages.
LCD screen:
Shows a number indicating a scan-to destination via the Up/Down buttons.
The Power Button:
Press to turn on the power. The Scan Button:
Press to start a scan. The Cancel Button:
Press to cancel a scanning job during operation.
1-3
|
User’s Manual |
Document |
Open it to place the document on the |
Cover |
glass platen. |
Paper Stopper |
Adjust to the length of the documents |
|
to prevent them from falling apart. |
1.3 Rear View |
|
Power Jack
USB Port
Part Name |
Function |
USB Port |
Connect to your computer. |
Power Jack |
Connect the AC adapter to the |
|
scanner. |
1-4
User’s Manual
2.Scanner Installation
2.1 Precautions
Keep the scanner out of direct sunlight. Direct exposure to the sun or excessive heat may cause damage to the unit.
Do not install the scanner in a humid or dusty place.
Be sure to use the proper AC power source.
Place the scanner securely on an even, flat surface. Tilted or uneven surfaces may cause mechanical or paper-feeding problems.
Retain the scanner box and packing materials for shipping purposes.
2-1
User’s Manual
2.2 Unlocking Your Scanner
The scan unit is locked during transport to protect the scanning mechanism from being damaged. Be sure to unlock the scan unit before using the machine.
Turn over the machine to |
Move the lock switch to the |
locate the lock switch. |
"unlocked position". |
If you need to transport the machine, please move the lock switch to the “Locked” position. Before doing this, make sure the scan unit at the end of the glass as indicated. (If not, please turn on the machine. When the scan unit moves to the end, turn off the machine.)
“Locked Position”
“Unlocked Position”
The scan unit must be at this position before being locked.
2-2
User’s Manual
2.3 Connecting to Power
Before connecting, make sure the power switch is off.
Plug the small end of the power adaptor into the power jack of your scanner. Insert the other end to an appropriate power outlet.
2.4 Turning on the Power
Press the Power Switch button on the front panel, the Power LED will flash. When it is finished and ready to scan, the LED indicator will stop flashing and become steadily on. To turn off the scanner, press the Power Switch button for about 3 seconds, the Power LED will be off.
2-3
User’s Manual
2.5 Installing the Scanner Driver
NOTE:
1). To ensure your computer can identify the USB scanner, please install scanner driver first before connecting the scanner to your computer.
2). The scanner driver contains TWAIN, ISIS and WIA driver. After the installation of scanner driver is completed, this scanner allows you to scan via a TWAIN, ISIS, or a WIA interface. Start your TWAIN-compliant image editing software application to select a TWAIN or WIA user interface or your ISIS software to select an ISIS user interface. You may also launch Microsoft’s Scanner and Camera Wizard to scan via a WIA user interface.
1.Place the supplied CD-ROM onto your CD-ROM drive.
2.The software installation graphic appears. If not, run
“setup.exe”.
2-4
User’s Manual
Contents on the installation graphic:
Install Scanner Driver: To communicate with your scanner, you need to install the scanner driver.
Install Button Manager V2: To use the buttons on the scanner, you need to install Button Manager V2. To ensure Button Manager V2 works properly, please FIRST install scanner driver before installing Button Manager V2.
Install AVScan X: To scan and organize your multipage document(s), you can install the software application to manage them easily and effectively.
View Manual: Click “View Manual” to view or print the detailed user manual for the scanner and Button Manager V2 respectively.
3.Click Install Scanner Driver to install the scanner driver and then click Install Button Manager V2 to install the Button Manager V2 unto your computer.
2-5
User’s Manual
2.6 Connecting to Computer
1.Connect the square end of the USB cable to the USB port of your scanner. Connect the rectangle end to the USB port at the rear side of your computer.
2.The computer should detect a new USB device and prompt a
“New Hardware Found” message.
3.By following the on-screen instructions, click the Next button to continue. When the certification screen appears, click Continue Anyway to complete the installation.
4.When the Finish dialog is prompted, click the Finish button.
2-6
User’s Manual
3.Completing Your First Scan
3.1Placing Your Document on the Flatbed
Open document cover. Place your document FACE DOWN on the document glass and align the document to the reference mark as indicated. Close document cover.
3-1
User’s Manual
3.2 Loading Your Document in the ADF Paper Tray
3.2.1 Notice on Using the ADF
Before using the ADF, please make sure that your paper meets the following specifications:
Document (s) can range in size from 50 x 50 mm (2 x 2 in.) to 216 x 356 mm (8.5 x 14 in.).
Document (s) can range in weight from 27 ~ 413 g/m2 (7 ~ 110 lb.)
ID cards up to 1.25 mm (0.05 in.) thick
Document(s) should be square or rectangular and in good condition (not fragile or worn).
Document(s) should be free of curl, wrinkle, tears, wet ink, or punch holes.
Document(s) should be free of staples, paper clips, paper sticky notes.
3-2
User’s Manual
Fanning Your Document
Note:
To avoid occasional multi-feeds or paper jams, please fan your documents and align the top edges before feeding them into the scanner.
1.Hold both ends of the documents and fan them a few times.
2.Rotate the documents by 90 degrees and fan them in the same manner.
3.Align the edges of the documents in a step-like pattern (see picture below).
Step-like
Scanning
Direction
3-3
User’s Manual
Document Feeding
1.Unfold the document feeder and its extension.
2.Unfold the output tray and raise the paper stopper.
3-4
User’s Manual
3. Raise the paper guide to hold your multi-page document.
4.Load the stack of document face down with the top of the pages pointing into the feeder.
3-5
User’s Manual
5.Verify that the paper guides are aligned with the edges of the stack.
3-6
User’s Manual
Note: The [Paper Width] switch:
If your document width is 216 mm (8.5 in.):
Slide the [Paper Width] switch DOWN to fix your paper guide to conveniently load the letter-size document.
If your document width is larger than 216 mm (8.5 in.): If your document width is larger than 216 mm (8.5 in.) such as invoices with punch holes, slide the [Paper Width] switch UP and move the paper guide to the right end to load your documents.
Slide DOWN the [Paper Width] switch to set your paper width to 216 mm (8.5 in.)
3-7
User’s Manual
Slide UP the [Paper Width] switch to set your paper width larger than 216 mm (8.5 in.)
3-8
User’s Manual
3.2.2Scanning a Stack of Document with Various sizes and Weights
When scanning a batch of documents with different sizes and weights, be sure to follow these guidelines to avoid a skewed image or a paper jam:
1.Align the documents TOP EDGE first in the sequence of paper size from large to small.
2.If two pages are of the same size yet with different weight, arrange these pages in the sequence of paper weight from heavyweight to lightweight.
3-9
User’s Manual
3.Align the edges of the documents by tapping the bottom of the stack against the table top.
4.Center these pages in the document feeder and make sure that the edges of page of the largest size slightly touch the Paper Guide.
3-10
User’s Manual
3.3Using the Paper Stopper
Raise the Paper Stopper and slide it to the right or to the left according to the paper size you are loading from the auto document feeder. The paper stopper is used to arrange your document so the paper can be neatly collected after scan.
3-11
User’s Manual
3.4Verifying Your Scanner Installation
To verify if your scanner installation is correct, Avision provides you a useful test program called Avision Capture Tool. With this tool, you can perform simple scans and view the captured images. In addition, it helps you complete your scan at a rated speed.
The following procedure describes how to verify your scanner installation. If the installation is not correct, please review the preceding section to check if the cable connection and scanner driver have been successfully installed.
Before you begin, be sure the scanner is on.
1.Select Start>Programs>Avision xxx Scanner>Avision Capture Tool. The Select Scanner Model dialog box will be displayed.
2.Select your driver type and scanner model and click OK. The following Avision Capture Tool dialog box will be displayed.
3-12
Loading...