TUF Z390M-PRO
GAMING (Wi-Fi)
Motherboard
E15012
Revised Edition
November 2018
Copyright© 2018 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.
Offer to Provide Source Code of Certain Software
This product contains copyrighted software that is licensed under the General Public License (“GPL”), under the Lesser General Public License Version (“LGPL”) and/or other Free Open Source Software Licenses. Such software in this product is distributed without any warranty to the extent permitted by the applicable law. Copies of these licenses are included in this product.
Where the applicable license entitles you to the source code of such software and/or other additional data, you may obtain it for a period of three years after our last shipment of the product, either
(1)for free by downloading it from https://www.asus.com/support/
or
(2)for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location where you want to have it shipped to, by sending a request to:
ASUSTeK Computer Inc.
Legal Compliance Dept.
15 Li Te Rd.,
Beitou, Taipei 112
Taiwan
In your request please provide the name, model number and version, as stated in the About Box of the product for which you wish to obtain the corresponding source code and your contact details so that we can coordinate the terms and cost of shipment with you.
The source code will be distributed WITHOUT ANY WARRANTY and licensed under the same license as the corresponding binary/object code.
This offer is valid to anyone in receipt of this information.
ASUSTeK is eager to duly provide complete source code as required under various Free Open Source Software licenses. If however you encounter any problems in obtaining the full corresponding source code we would be much obliged if you give us a notification to the email address gpl@asus.com, stating the product and describing the problem (please DO NOT send large attachments such as source code archives, etc. to this email address).
ii
Contents
Safety information...................................................................................................... |
vi |
About this guide......................................................................................................... |
vii |
TUF Z390M-PRO GAMING (Wi-Fi) specifications summary.................................... |
ix |
Package contents..................................................................................................... |
xiii |
Installation tools and components.......................................................................... |
xiv |
Chapter 1: |
Product Introduction |
|
|
1.1 |
Motherboard overview............................................................................... |
1-1 |
|
|
1.1.1 |
Before you proceed..................................................................... |
1-1 |
|
1.1.2 |
Motherboard layout...................................................................... |
1-2 |
|
1.1.3 |
Central Processing Unit (CPU).................................................... |
1-4 |
|
1.1.4 |
System memory........................................................................... |
1-5 |
|
1.1.5 |
Expansion slots............................................................................ |
1-7 |
|
1.1.6 |
Onboard switches........................................................................ |
1-9 |
|
1.1.7 |
Jumpers..................................................................................... |
1-10 |
|
1.1.8 |
Onboard LEDs........................................................................... |
1-11 |
|
1.1.9 |
Internal connectors.................................................................... |
1-12 |
Chapter 2: |
Basic Installation |
|
|
2.1 |
Building your PC system........................................................................... |
2-1 |
|
2.1.1 |
|
CPU installation........................................................................... |
2-1 |
2.1.2 |
|
Cooling system installation.......................................................... |
2-3 |
2.1.3 |
|
Motherboard installation.............................................................. |
2-4 |
2.1.4 |
|
DIMM installation......................................................................... |
2-5 |
2.1.5 |
|
ATX power connection................................................................. |
2-6 |
2.1.6 |
|
SATA device connection.............................................................. |
2-7 |
2.1.7 |
|
Front I/O connector...................................................................... |
2-8 |
2.1.8 |
|
Expansion card installation.......................................................... |
2-9 |
2.1.9 |
|
M.2 installation........................................................................... |
2-10 |
2.1.10 |
Wi-Fi antenna installation.......................................................... |
2-11 |
|
2.2 |
Motherboard rear and audio connections.............................................. |
2-12 |
|
2.2.1 |
|
Rear I/O connection................................................................... |
2-12 |
2.2.2 |
|
Audio I/O connections................................................................ |
2-14 |
2.3 |
Starting up for the first time.................................................................... |
2-15 |
|
2.4 |
Turning off the computer......................................................................... |
2-15 |
iii
Chapter 3: |
BIOS Setup |
|
|
3.1 |
Knowing BIOS............................................................................................. |
3-1 |
|
3.2 |
BIOS setup program................................................................................... |
3-2 |
|
3.2.1 |
|
EZ Mode...................................................................................... |
3-3 |
3.2.2 |
|
Advanced Mode........................................................................... |
3-4 |
3.2.3 |
|
QFan Control............................................................................... |
3-7 |
3.2.4 |
|
EZ Tuning Wizard........................................................................ |
3-9 |
3.3 |
My Favorites.............................................................................................. |
3-12 |
|
3.4 |
Main menu................................................................................................. |
3-14 |
|
3.5 |
Ai Tweaker menu...................................................................................... |
3-14 |
|
3.6 |
Advanced menu........................................................................................ |
3-16 |
|
3.6.1 |
|
Platform Misc Configuration....................................................... |
3-16 |
3.6.2 |
|
CPU Configuration..................................................................... |
3-16 |
3.6.3 |
|
System Agent (SA) Configuration.............................................. |
3-16 |
3.6.4 |
|
PCH Configuration..................................................................... |
3-17 |
3.6.5 |
|
PCH Storage Configuration....................................................... |
3-17 |
3.6.6 |
|
PCH-FW Configuration.............................................................. |
3-18 |
3.6.7 |
|
Onboard Devices Configuration................................................. |
3-18 |
3.6.8 |
|
APM Configuration..................................................................... |
3-18 |
3.6.9 |
|
PCI Subsystem Settings............................................................ |
3-18 |
3.6.10 |
USB Configuration..................................................................... |
3-19 |
|
3.6.11 |
Network Stack Configuration..................................................... |
3-19 |
|
3.6.12 |
NVMe Configuration.................................................................. |
3-19 |
|
3.6.13 |
HDD/SSD SMART Information.................................................. |
3-19 |
|
3.7 |
Monitor menu............................................................................................ |
3-20 |
|
3.8 |
Boot menu................................................................................................. |
3-20 |
|
3.9 |
Tool menu.................................................................................................. |
3-22 |
|
3.9.1 |
|
ASUS EZ Flash 3 Utility............................................................. |
3-22 |
3.9.2 |
|
ASUS User Profile..................................................................... |
3-22 |
3.9.3 |
|
ASUS SPD Information.............................................................. |
3-22 |
3.9.4 |
|
ASUS Q-Installer....................................................................... |
3-22 |
3.10 |
Exit menu................................................................................................... |
3-23 |
|
3.11 |
Updating BIOS.......................................................................................... |
3-24 |
|
3.11.1 |
EZ Update.................................................................................. |
3-24 |
|
3.11.2 |
ASUS EZ Flash 3....................................................................... |
3-25 |
|
3.11.3 |
ASUS CrashFree BIOS 3.......................................................... |
3-27 |
iv
Chapter 4: |
RAID Support |
|
|
4.1 |
RAID configurations................................................................................... |
4-1 |
|
4.1.1 |
|
RAID definitions........................................................................... |
4-1 |
Appendix |
|
|
|
Notices |
..................................................................................................................... |
|
A-1 |
ASUS contact information...................................................................................... |
A-7 |
v
Electrical safety
•To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.
•When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
•Before connecting or removing signal cables from the motherboard, ensure that all power cables are unplugged.
•Seek professional assistance before using an adapter or extension cord. These devices could interrupt the grounding circuit.
•Ensure that your power supply is set to the correct voltage in your area. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company.
•If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
Operation safety
•Before installing the motherboard and adding devices on it, carefully read all the manuals that came with the package.
•Before using the product, ensure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.
•To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets and circuitry.
•Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it may become wet.
•Place the product on a stable surface.
•If you encounter technical problems with the product, contact a qualified service technician or your retailer.
vi
This user guide contains the information you need when installing and configuring the motherboard.
How this guide is organized
This guide contains the following parts:
1.Chapter 1: Product Introduction
This chapter describes the features of the motherboard and the new technology it supports. It includes description of the switches, jumpers, and connectors on the motherboard.
2.Chapter 2: Basic Installation
This chapter lists the hardware setup procedures that you have to perform when installing system components.
3.Chapter 3: BIOS Setup
This chapter tells how to change system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.
4.Chapter 4: RAID Support
This chapter describes the RAID configurations.
Where to find more information
Refer to the following sources for additional information and for product and software updates.
1.ASUS website
The ASUS website (www.asus.com) provides updated information on ASUS hardware and software products.
2.Optional documentation
Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer. These documents are not part of the standard package.
vii
Conventions used in this guide
To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual.
DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task.
CAUTION: Information to prevent damage to the components when trying to complete a task.
IMPORTANT: Instructions that you MUST follow to complete a task.
NOTE: Tips and additional information to help you complete a task.
Typography
Bold text |
Indicates a menu or an item to select. |
Italics |
Used to emphasize a word or a phrase. |
<Key> |
Keys enclosed in the less-than and greater-than sign |
|
means that you must press the enclosed key. |
|
Example: <Enter> means that you must press the Enter or |
|
Return key. |
<Key1> + <Key2> + <Key3> |
If you must press two or more keys simultaneously, the key |
|
names are linked with a plus sign (+). |
viii
|
Intel® Socket 1151 for Intel® Core™ 9000 series, 8th Generation Core™ i7/ i5/ |
|
|
i3, Pentium® and Celeron® processors |
|
|
Supports 14nm CPU |
|
CPU |
Supports Intel® Turbo Boost Technology 2.0* |
|
|
* Intel® Turbo Boost Technology 2.0 support depends on the CPU types. |
|
|
** Refer to www.asus.com for Intel® CPU support list. |
|
Chipset |
Intel® Z390 Chipset |
|
|
4 x DIMM, max. 64GB, DDR4 4133(O.C.) / 4000(O.C.) / 3866(O.C.) / |
|
|
3733(O.C.) / 3600(O.C.) / 3466(O.C.) / 3400(O.C.) / 3333(O.C.) / 3300(O.C.) |
|
|
/ 3200(O.C.) / 3000(O.C.) / 2800(O.C.) / 2666 / 2400 / 2133 MHz, non-ECC, |
|
|
un-buffered memory |
|
Memory |
Dual channel memory architecture |
|
Supports Intel® Extreme Memory Profile (XMP) |
||
|
||
|
* Hyper DIMM support is subject to the physical characteristics of individual CPUs. |
|
|
Please refer to Memory QVL(Qualified Vendors List) for details. |
|
|
** For DRAM compatibility and performance, please use A2 slot for priority 1. |
|
|
|
|
|
2 x PCIe 3.0 / 2.0 x16 slots (support x16, x8/x8, x8/x4+x4*, x8+x4+x4+x0**) |
|
|
1 x PCIe 3.0 / 2.0 x1 slot |
|
|
* For 2 Intel® SSD on CPU support, install a Hyper M.2 X16 card (sold separately) |
|
Expansion slots |
into the PCIe X16_2 slot, and enable this card under BIOS settings. |
|
|
||
|
** For 3 Intel® SSD on CPU support, install a Hyper M.2 X16 card (sold separately) |
|
|
into the PCIe X16_1 slot, and enable this card under BIOS settings. |
|
|
*** Hyper M.2 X16 series card is sold separately. Install a Hyper M.2 X16 series |
|
|
card and enable this card under BIOS settings. |
|
|
|
|
Multi-GPU |
Supports NVIDIA® 2-Way SLI™ Technology |
|
Support |
Supports AMD® 2-Way/Quad-GPU CrossFireX™ Technology |
|
|
Integrated Graphics ProcessorIntel® UHD Graphics support |
|
|
Multi-VGA output support: DisplayPort 1.2 */ HDMI ports |
|
|
- Supports DisplayPort 1.2 output with a max. resolution of 4096 x 2304 |
|
|
@60Hz |
|
VGA |
- Supports HDMI 1.4b output with a max. resolution of 4096 x 2160@30Hz |
|
|
- Supports Intel® InTru™ 3D, Quick Sync Video, Clear Video HD |
|
|
Technology, Insider™ |
|
|
* DP 1.2 Multi-Stream Transport compliant supports DP 1.2 monitor daisy chain up |
|
|
to 3 displays |
|
|
|
|
|
Intel® CPU support with Intel® Rapid Storage Technology (RAID0 & |
|
|
RAID 1) |
|
|
- Supports CPU RAID with Intel® PCIe NVME SSDs. PCIEX16_1 slot |
|
|
and PCIEX16_2 slot can support RAID 0 and 1. RAID 0 and 1 are also |
|
Storage |
supported via a Hyper M.2 X16 series card. |
|
|
- PCIEX16_1 slot supports up to 3 Intel® PCIe NVME SSDs via a Hyper M.2 |
|
|
X16 series card.* |
|
|
- PCIEX16_2 slot supports up to 2 Intel® PCIe NVME SSDs via a Hyper M.2 |
|
|
X16 series card.* |
|
|
(continued on the next page) |
ix
TUF Z390M-PRO GAMING (Wi-Fi) specifications summary
|
Intel® Z390 Chipset with RAID 0, 1, 5, 10 and Intel Rapid Storage |
|
|
Technology support |
|
|
- 1 x M.2_1 Socket 3 with M key, type 2242/2260/2280/22110 storage |
|
|
devices support (both PCIE x4 & SATA modes)** |
|
|
- 1 x M.2_2 Socket 3 with M Key, type 2242/2260/2280 storage devices |
|
Storage |
support (PCIe x4 mode) |
|
- 6 x SATA 6Gb/s ports |
||
|
||
|
- Intel® Optane™ Memory Ready |
|
|
* Hyper M.2 X16 series card is sold separately. Install a Hyper M.2 X16 series card |
|
|
and enable this card under BIOS settings. |
|
|
** The M.2_1 socket shares SATA_2 port when using an M.2 SATA mode device. |
|
|
Adjust BIOS settings to use a SATA device. |
|
|
Intel® I219V Dual interconnect between the integrated Media Access |
|
LAN |
Controller (MAC) and Physical Layer (PHY) |
|
TUF LANGuard |
||
|
||
|
ASUS Turbo LAN Utility |
|
|
|
|
|
Intel® Wireless-AC 9560 |
|
Wireless Data |
Intel® CNVi interface with Wi-Fi MU-MIMO 802.11 a/b/g/n/ac supports dual |
|
frequency band 2.4/5 GHz |
||
Network |
||
Supports channel bandwidth: HT20/HT40/HT80/HT160, Up to 1.73Gbps |
||
|
||
|
transfer speed |
|
|
|
|
|
Bluetooth V5.0* |
|
Bluetooth |
* Bluetooth V5.0 will be supported on future versions of Windows. |
|
|
Refer to https:// www.microsoft.com for updates on Windows OS Bluetooth |
|
|
support version. |
|
|
|
|
|
Realtek® S1200A 8-Channel* High Definition Audio CODEC |
|
|
- DTS Custom for TUF GAMING Headphone |
|
|
- Audio Shielding: Ensures precision analog/digital separation and greatly |
|
|
reduces multi-lateral interference |
|
|
- Dedicated audio PCB layers: Separate layers for left and right channels to |
|
Audio |
guard the quality of the sensitive audio signals |
|
|
- Premium Japanese audio capacitors: Provide warm, natural and immersive |
|
|
sound with exceptional clarity and fidelity |
|
|
- Supports jack-detection and front panel jack-retasking |
|
|
* Choose the chassis with HD audio module in front panel to support 8-channel |
|
|
audio output. |
|
|
|
|
|
Intel® Z390 Chipset: |
|
|
- 2 x USB 3.1 Gen 2 (up to 10Gbps) ports |
|
|
(1 port at mid-board; 1 port at back panel, [teal blue], Type A) |
|
USB |
- 7 x USB 3.1 Gen 1 ports |
|
|
(2 ports at mid-board; 4 ports at back panel, [blue], Type A; 1 port at |
|
|
back panel, Type C) |
|
|
- 4 x USB 2.0 ports ( 4 ports at mid-board) |
|
|
(continued on the next page) |
x
TUF Z390M-PRO GAMING (Wi-Fi) specifications summary
|
1 x PS/2 keyboard port |
|
|
1 x PS/2 mouse port |
|
|
1 x HDMI port |
|
|
1 x DisplayPort |
|
Back I/O Ports |
1 x USB3.1 Gen 2 (up to 10Gbps) port (Type A [teal blue]) |
|
1 x USB3.1 Gen 1 port (Type C) |
||
|
||
|
4 x USB3.1 Gen 1 ports (Type A [blue]) |
|
|
1 x LAN (RJ45) port |
|
|
1 x Intel® Wi-Fi module |
|
|
3 x Audio jacks |
|
|
|
|
1 x USB 3.1 Gen 2 (up to 10Gbps) front panel connector |
|
1 x USB 3.1 Gen 1 connector supports additional 2 USB 3.1 Gen 1 ports |
|
(19-pin) |
|
2 x USB 2.0 connectors support additional 4 USB 2.0 ports |
|
6 x SATA 6Gb/s connectors |
|
1 x M.2_1 Socket 3 for M Key, type 2242/2260/2280/22110 storage devices |
|
1 x M.2_2 Socket 3 for M Key, type 2242/2260/2280 storage devices |
|
1 x 4-Pin CPU fan connector for both 3-pin (DC mode) and 4-pin (PWM |
|
mode) CPU coolers control* |
|
1 x 4-Pin CPU_OPT connector |
|
1 x 4-Pin AIO_Pump header |
Internal I/O |
2 x 4-Pin Chassis fan connectors for both 3-pin (DC mode) and 4-pin (PWM |
mode) coolers control* |
|
connectors |
1 x Front panel audio connector (AAFP) |
|
|
|
1 x 24-Pin EATX power connector |
|
1 x 8-Pin EATX 12V power connector |
|
1 x System Panel (Q-Connector) |
|
1 x COM port |
|
2 x RGB Strip headers |
|
1 x S/PDIF out header |
|
1 x MemOK!_II switch |
|
1 x Clear CMOS jumper |
|
* By default, the CPU/Chassis Q-Fan control setting is set to Auto mode, which |
|
detects the CPU and chassis fans installed and changes the control mode |
|
automatically. |
|
TUF Components (TUF Cap, TUF Chokes, MOSFET & LANGuard ; |
|
certified by military-standard) |
|
ASUS TUF PROTECTION |
- ASUS SafeSlot: Protects your graphics card Investment ASUS Special - ASUS ESD Guard: Enhanced ESD protection
Features
-ASUS Overvoltage Protection: World-class circuit-protecting power design
-ASUS Stainless-Steel Back I/O: 3X corrosion-resistance for greater durability!
-ASUS DIGI+ VRM
(continued on the next page)
xi
TUF Z390M-PRO GAMING (Wi-Fi) specifications summary
|
Superb Performance |
|
|
Turbo LAN |
|
|
- Experience smooth online gaming with lower pings and less lags |
|
|
M.2 onboard |
|
|
- The latest transfer technologies with up to 32Gb/s data transfer speeds |
|
|
ASUS Fan Xpert 4 |
|
|
- Advanced fan and liquid controls for ultimate cooling and quietness |
|
|
ASUS EPU |
|
|
- EPU |
|
|
OptiMem II |
|
|
- Higher performance of memory overclocking. Enhance compatibility for |
|
|
some memory with RGB. |
|
|
MemOK! II |
|
|
- Enhance memory compatibility. More smart and convenient. Keep high |
|
|
performance. (Shorten the PC starting time) |
|
|
Q-Installer |
|
ASUS Special |
- Auto download driver and software. Friendly for first PC builder. |
|
AURA |
||
Features |
||
|
- Bright up your Build |
|
|
ASUS Exclusive Features |
|
|
- ASUS Ai Charger |
|
|
- ASUS AI Suite 3 |
|
|
ASUS EZ DIY |
|
|
|
EZ Update |
|
|
|
UEFI BIOS EZ Mode |
|
|
|
- Featuring friendly graphics user interface |
|
|
|
- ASUS O.C. Tuner |
|
|
|
- ASUS CrashFree BIOS 3 |
|
|
|
- ASUS EZ Flash 3 |
|
|
|
PC Cleaner |
|
|
|
ASUS Q-Design |
|
|
|
- ASUS Q-Connector |
|
|
|
- ASUS Q-Slot |
|
|
|
- ASUS Q-DIMM |
|
|
|
|
|
|
ASUS Quiet |
- ASUS ASUS Fan Xpert 4 |
|
|
Thermal |
- Stylish Fanless Design: PCH Heat-sink & 2 x MOS Heat-sink & M.2 Heat- |
|
|
Solution |
sink solution |
|
|
|
128 Mb Flash ROM, UEFI AMI BIOS, PnP, DMI3.0, WfM2.0, SM BIOS 3.0, |
|
|
BIOS Features |
ACPI 6.0, Multi-language BIOS, ASUS EZ Flash 3, CrashFree BIOS 3, F11 |
|
|
EZ Tuning Wizard, F6 Qfan Control, F3 My Favorites, Last Modified log, |
||
|
|
F12 PrintScreen, and ASUS DRAM SPD (Serial Presence Detect) memory |
|
|
|
information |
|
|
|
(continued on the next page) |
xii
TUF Z390M-PRO GAMING (Wi-Fi) specifications summary
Manageability |
WOL by PME, PXE |
|
|
|
|
|
|
Drivers |
Support DVD |
ASUS Utilities |
|
contents |
ASUS EZ Update |
|
|
|
Anti-virus software (OEM version) |
|
|
|
Operating |
Windows® 10 64-bit |
|
system support |
|
|
Form factor |
mATX Form Factor, 9.6”x 9.6” (24.4cm x 24.4cm) |
|
|
|
|
Specifications are subject to change without notice. Please refer to the ASUS website for the latest specifications.
xiii
Check your motherboard package for the following items.
Motherboard |
TUF Z390M-PRO GAMING (Wi-Fi) |
||
|
|
|
|
Cables |
2 x SATA 6Gb/s cables |
||
|
|
|
|
|
|
1 x IO Shield |
|
|
|
1 x M.2 screw package (2-in-1) |
|
|
|
1 x Q-connector |
|
Accessories |
1 x SLITM HB BRIDGE (2-WAY-S) |
||
|
|
1 x ASUS 2T2R dual band Wi-Fi moving antenna (Wi-Fi |
|
|
|
802.11a/b/g/n/ac compliant) |
|
|
|
1 x TUF GAMING sticker |
|
|
|
|
|
Application drive |
1 x support DVD |
||
|
|
|
|
Documentation |
1 x User guide |
||
1 x TUF Certification card |
|||
|
|
||
|
|
|
|
|
|
|
If any of the above items is damaged or missing, contact your retailer.
xiv
Intel® 1151 CPU
Intel® 1151 compatible CPU Fan
PC chassis |
SATA hard disk drive |
Phillips (cross) screwdriver |
|
1 bag of screws |
DIMM |
Power supply unit
SATA optical disc drive (optional)
Graphics card
The tools and components listed above are not included in the motherboard package.
xv
xvi
Product Introduction |
1 |
1.1Motherboard overview
1.1.1Before you proceed
Take note of the following precautions before you install motherboard components or change any motherboard settings.
•Unplug the power cord from the wall socket before touching any component.
•Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.
•Hold components by the edges to avoid touching the ICs on them.
•Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that came with the component.
•Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components.
Chapter 1
ASUS TUF Z390M-PRO GAMING (Wi-Fi) |
1-1 |
1 Chapter
1.1.2Motherboard layout
1 |
2 |
3 |
2 |
4 |
24.4cm(9.6in)
KBMS
DP
|
|
56 |
|
|
|
|
|
|
|
||
|
HDMI |
U31G1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
U31G1_C2 |
U31G2_1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LAN_U31G1_78 |
|
|||
|
|
|
|
|
|
M.2(WIFI)
AUDIO |
Intel® |
I219V |
Super
I/O
EATX12V |
DIGI+
VRM
LGA1151
AIO_PUMP
BATTERY
CHA_FAN1
PCIEX16_1
ASM1480 ASM1480 ASM1480 ASM1480
22110 |
2280 |
2260 |
2242 |
PCIEX16_2
CPU_FAN
CPU_OPT
|
B1 (64bit, 288-pin module) |
B2* (64bit, 288-pin module) |
A1 (64bit, 288-pin module) |
A2* (64bit, 288-pin module) |
|
DDR4 DIMM_ |
DDR4 DIMM_ |
DDR4 DIMM_ |
DDR4 DIMM_ |
1(SOCKET3) |
SATAPCIE IRST X4 |
|
|
|
|
V |
|
|
|
|
V |
|
|
|
M.2_ |
|
Intel® |
|
|
|
|
|
Z390 |
|
Mem_LED
MemOK!_II
EATXPWR
CHA_FAN2
U31G2_C3
SATA6G_2 SATA6G_1
5
6
24.4cm(9.6in)
1
2
7
8
9
PCIEX1 |
|
|
|
|
|
|
2(SOCKET3) |
|
|
|
3 |
|
|
|
PCIE SATA |
IRST |
|
|
|
128Mb |
|||
|
|
|
|
X4 |
X |
V |
|
|
|
|
SATA6G |
|
|
|
|
|
|
|
|
|
|||
|
2280 |
2260 |
2242 |
|
|
|
M.2 |
|
|
CLRTC |
BIOS |
COM |
SPDIF_OUT |
|
USB1112 |
USB34 |
U31G1_910 |
SATA6G_6 |
SATA6G_5 |
SATA6G_4 |
10 |
AAFP |
RGB_HEADER1 RGB_HEADER2 |
PANEL |
17 |
16 |
15 |
14 |
13 |
12 |
9 |
11 |
Refer to 1.1.9 Internal connectors and 2.2.1 Rear I/O connection for more information about rear panel connectors and internal connectors.
1-2 |
Chapter 1: Product Introduction |
Layout contents
Connectors/Jumpers/Buttons and switches/Slots |
Page |
|
1. |
EATX power connectors (24-pin EATXPWR; 8-pin EATX12V) |
1-16 |
2. |
CPU, CPU optional, and chassis fan connectors; AIO pump connector (4- |
1-15 |
|
pin CPU_FAN; 4-pin CPU_OPT; 4-pin CHA_FAN1-2; 4-pin AIO_PUMP) |
|
|
|
|
3. |
LGA1151 CPU socket |
1-4 |
4. |
DDR4 DIMM slots |
1-5 |
5. |
MemOK! II switch (MemOK!_II_switch) |
1-9 |
6. |
Memory LED (Mem_LED) |
1-11 |
7. |
USB 3.1 Gen 2 front panel connector (U31G2_C3) |
1-13 |
8. |
M.2 sockets (M.2_1; M.2_2) |
1-18 |
9. |
Intel® Serial ATA 6 Gb/s connectors (7-pin SATA6G_1~6) |
1-12 |
10. |
Clear RTC RAM jumper (2-pin CLRTC) |
1-10 |
11. |
System panel connector (20-5 pin PANEL) |
1-17 |
12. |
USB 3.1 Gen 1 connector (20-1 pin U31G1_910) |
1-14 |
13. |
USB 2.0 connectors (10-1 pin USB1112, USB34) |
1-14 |
14. |
RGB headers (4-pin RGB_HEADER_1/2) |
1-19 |
15. |
Digital audio connector (4-1 pin SPDIF_OUT) |
1-18 |
16. |
Serial port connector (10-1 pin COM) |
1-15 |
17. |
Front panel audio connector (10-1 pin AAFP) |
1-13 |
Chapter 1
ASUS TUF Z390M-PRO GAMING (Wi-Fi) |
1-3 |
1.1.3Central Processing Unit (CPU)
The motherboard comes with a surface mount LGA1151 socket designed for Intel® Core™ 9000 series, 8th Generation Core™ i7/ i5/ i3, Pentium® and Celeron® processors.
1 Chapter
TUF Z390M-PRO GAMING (WI-FI) CPU LGA1151
•Ensure that you install the correct CPU designed for LGA1151 socket only. DO NOT install a CPU designed for LGA1150, LGA1155, and LGA1156 sockets in the LGA1151 socket.
•Ensure that all power cables are unplugged before installing the CPU.
•Upon purchase of the motherboard, ensure that the PnP cap is on the socket and the socket contacts are not bent. Contact your retailer immediately if the PnP cap is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components. ASUS will shoulder the cost of repair only if the damage is shipment/ transit-related.
•Keep the cap after installing the motherboard. ASUS will process Return Merchandise Authorization (RMA) requests only if the motherboard comes with the cap on the LGA1151 socket.
•The product warranty does not cover damage to the socket contacts resulting from incorrect CPU installation/removal, or misplacement/loss/incorrect removal of the PnP cap.
1-4 |
Chapter 1: Product Introduction |
1.1.4System memory
The motherboard comes with four DDR4 (Double Data Rate 4) Dual Inline Memory Modules (DIMM) slots.
A DDR4 module is notched differently from a DDR, DDR2, or DDR3 module. DO NOT install a DDR, DDR2, or DDR3 memory module to the DDR4 slot.
DIMM_A2*
DIMM_A1
DIMM_B2*
DIMM_B1
TUF Z390M-PRO GAMING (WI-FI) 288-pin DDR4 DIMM sockets
Recommended memory configurations
Chapter 1
|
DIMM_B2* |
DIMM_B1 |
|
|
DIMM_B2* |
||
DIMM_A2* |
DIMM_A2* |
DIMM_A1 |
|
DIMM_A2* |
|||
|
|
ASUS TUF Z390M-PRO GAMING (Wi-Fi) |
1-5 |
1 Chapter
Memory configurations
You may install 2 GB, 4 GB, 8 GB and 16 GB unbuffered and non ECC DDR4 DIMMs into the DIMM sockets.
You may install varying memory sizes in Channel A, and Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration. Any excess memory from the higher-sized channel is then mapped for single-channel operation.
•The default memory operation frequency is dependent on its Serial Presence Detect (SPD), which is the standard way of accessing information from a memory module. Under the default state, some memory modules for overclocking may operate at a lower frequency than the vendor-marked value.
•For system stability, use a more efficient memory cooling system to support a full memory load (4 DIMMs) or overclocking condition.
•Memory modules with memory frequency higher than 2133MHz and their corresponding timing or the loaded XMP profile is not the JEDEC memory standard. The stability and compatibility of the memory modules depend on the CPU’s capabilities and other installed devices.
•ASUS exclusively provides hyper DIMM support function.
•Hyper DIMM support is subject to the physical characteristics of individual CPUs. Load the X.M.P. or D.O.C.P. settings in the BIOS for the hyper DIMM support.
•Always install the DIMMS with the same CAS Latency. For an optimum compatibility, we recommend that you install memory modules of the same version or data code (D/C) from the same vendor. Check with the vendor to get the correct memory modules.
•Visit the ASUS website for the latest QVL.
1-6 |
Chapter 1: Product Introduction |
1.1.5Expansion slots
Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components.
Chapter 1
PCIEX16_1
PCIEX16_2
PCIEX1
Slot No. Slot Description
1PCIEx16_1 slot
2PCIEx16_2 slot
3PCIEx1 slot
ASUS TUF Z390M-PRO GAMING (Wi-Fi) |
1-7 |
1 Chapter
VGA Configuration |
PCIe operating mode |
|
|
PCIEX16_1 |
|
PCIEX16_2 |
|
|
|
||
|
|
|
|
Single VGA/PCIe card |
x16 |
|
N/A |
(single VGA recommended) |
|
||
|
|
|
|
|
|
|
|
Dual VGA/PCIe cards |
x8 |
|
x8 |
|
|
|
|
•In single VGA card mode, use the PCIEX16_1 slot (gray) for a PCI Express x16 graphics card to get better performance.
•We recommend that you provide sufficient power when running CrossFireX™ or SLI™ mode.
•Connect a chassis fan to the motherboard connector labeled CHA_FAN1-2 when using multiple graphics cards for better thermal environment.
Hyper M.2 X16 card |
PCI Express 3.0 operating mode |
|
|
|
|
|
|
|
configuration |
PCIEX16_1 |
PCIEX16_2 |
|
||
|
|
|
2 Intel® SSD on CPU support |
x8 |
x4+x4 |
3 Intel® SSD on CPU support |
x8+x4+x4 |
N/A |
• Hyper M.2 X16 card is purchased separately.
•Enable the Hyper M.2 X16 card under BIOS settings.
1-8 |
Chapter 1: Product Introduction |
1.1.6Onboard switches
1.MemOK! II switch (MemOK!_II)
Installing DIMMs that are not compatible with the motherboard may cause system boot failure. The switch is enabled by default, allowing memory re-training when the motherboard is unresponsive due to memory problems. The Mem_LED will light up while re-training, and turn off when the re-training is complete.
MemOK!_II
ON |
OFF |
TUF Z390M-PRO GAMING (WI-FI) MemOK! switch
• Refer to section 1.1.8 Onboard LEDs for the exact location of the MEM LED.
•The MemOK! II switch does not function under Windows® OS environment.
•During the tuning process, the system loads and tests pretest profiles. It takes about 30 seconds for the system to test one set of profiles. If the test fails, the system reboots and tests the next set of profiles. The system will reboot multiple times when training, once the system has completed the training process the Mem_LED will turn off, please refrain from doing anything before the Mem_LED turns off.
•Due to memory tuning requirement, the system automatically reboots when each profile is tested.
•If you turn off the computer and replace DIMMs during the tuning process, the system continues memory tuning after turning on the computer. To stop memory tuning, turn off the computer and unplug the power cord for about 5–10 seconds, then set the MemOK! II switch to disabled.
•Ensure to replace the DIMMs with ones recommended in the Memory QVL (Qualified Vendors Lists) at www.asus.com.
•We recommend that you download and update to the latest BIOS version from www.asus.com after using the MemOK! II function.
Chapter 1
ASUS TUF Z390M-PRO GAMING (Wi-Fi) |
1-9 |
1.1.7Jumpers
|
1. Clear RTC RAM jumper (2-pin CLRTC) |
|
|
This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can |
|
1Chapter |
clear the CMOS memory of date, time, and system setup parameters by erasing the |
|
CMOS RTC RAM data. The onboard button cell battery powers the RAM data in |
||
|
||
|
CMOS, which include system setup information such as system passwords. |
|
|
CLRTC |
|
|
+3V BAT GND |
PIN 1
TUF Z390M-PRO GAMING (WI-FI) Clear RTC RAM
To erase the RTC RAM:
1.Turn OFF the computer and unplug the power cord.
2.Short-circuit pin 1-2 with a metal object or jumper cap for about 5-10 seconds.
3.Plug the power cord and turn ON the computer.
4.Hold down the <Delete> key during the boot process and enter BIOS setup to re-enter data.
Except when clearing the RTC RAM, never remove the cap on CLRTC jumper default position. Removing the cap will cause system boot failure!
•If the steps above do not help, remove the onboard battery and move the jumper again to clear the CMOS RTC RAM data. After the CMOS clearance, reinstall the battery.
•You do not need to clear the RTC when the system hangs due to overclocking. For system failure due to overclocking, use the C.P.R. (CPU Parameter Recall) feature. Shut down and reboot the system so the BIOS can automatically reset parameter settings to default values.
•Due to the chipset behavior, AC power off is required to enable C.P.R. function. You must turn off and on the power supply or unplug and plug the power cord before
rebooting the system.
1-10 |
Chapter 1: Product Introduction |
1.1.8Onboard LEDs
1. |
Memory LED (Mem_LED) |
|
|
The Mem_LED will light up and remain lit while the MemOK! II function is in use. When |
|
|
the re-training is complete, the Mem_LED will turn off. |
1 |
|
|
|
|
Mem_LED |
Chapter |
|
|
|
|
TUF Z390M-PRO GAMING (WI-FI) MemOK!_LED |
|
ASUS TUF Z390M-PRO GAMING (Wi-Fi) |
1-11 |
1 Chapter
1.1.9Internal connectors
1.Intel® Z390 Serial ATA 6 Gb/s connectors (7-pin SATA6G_1-6)
These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10 configuration with the Intel® Rapid Storage Technology through the onboard Intel® Z390 chipset.
A
SATA6G_1
GND
RSATA_TXP1
RSATA_TXN1
GND
RSATA_RXN1
RSATA_RXP1
GND
SATA6G_2
GND
RSATA_TXP2
RSATA_TXN2
GND
RSATA_RXN2
RSATA_RXP2
GND
SATA6G_3
GND
RSATA_TXP3
RSATA_TXN3
GND
RSATA_RXN3
RSATA_RXP3
GND
B
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A |
|
SATA6G_6 |
|
SATA6G_5 |
|
SATA6G_4 |
|||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RXP6 |
RXN6 |
|
TXN6 |
TXP6 |
|
|
|
|
|
|
RXP5 |
RXN5 |
|
TXN5 |
TXP5 |
|
|
|
|
|
|
RXP4 |
RXN4 |
|
TXN4 |
TXP4 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
GND RSATA |
RSATA |
GND RSATA |
RSATA |
GND |
|
GND RSATA |
RSATA |
GND RSATA |
RSATA |
GND |
|
GND RSATA |
RSATA |
GND RSATA |
RSATA |
GND |
|||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
B |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TUF Z390M-PRO GAMING (WI-FI) SATA 6 Gb/s connectors
•These connectors are set to [AHCI] by default. If you intend to create a Serial ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [Intel RST Premium With Intel Optane System Acceleration (RAID)].
•For more information on configuring your RAID sets, please refer to the RAID Configuration Guide which you can find at https://www.asus.com/support.
•The M.2_1 socket shares SATA_2 port when using an M.2 SATA mode device. Adjust BIOS settings to use a SATA device.
1-12 |
Chapter 1: Product Introduction |