ASUS TUF B360-Pro Gaming Service Manual

TUF B360-PRO GAMING

Motherboard

E13810

First Edition

February 2018

Copyright © 2018 ASUSTeK COMPUTER INC. All Rights Reserved.

No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.

Offer to Provide Source Code of Certain Software

This product contains copyrighted software that is licensed under the General Public License (“GPL”), under the Lesser General Public License Version (“LGPL”) and/or other Free Open Source Software Licenses. Such software in this product is distributed without any warranty to the extent permitted by the applicable law. Copies of these licenses are included in this product.

Where the applicable license entitles you to the source code of such software and/or other additional data, you may obtain it for a period of three years after our last shipment of the product, either

(1)for free by downloading it from https://www.asus.com/support/

or

(2)for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location where you want to have it shipped to, by sending a request to:

ASUSTeK Computer Inc.

Legal Compliance Dept.

15 Li Te Rd.,

Beitou, Taipei 112

Taiwan

In your request please provide the name, model number and version, as stated in the About Box of the product for which you wish to obtain the corresponding source code and your contact details so that we can coordinate the terms and cost of shipment with you.

The source code will be distributed WITHOUT ANY WARRANTY and licensed under the same license as the corresponding binary/object code.

This offer is valid to anyone in receipt of this information.

ASUSTeK is eager to duly provide complete source code as required under various Free Open Source Software licenses. If however you encounter any problems in obtaining the full corresponding source code we would be much obliged if you give us a notification to the email address [e-mail], stating the product and describing the problem (please DO NOT send large attachments such as source code archives, etc. to this email address).

ii

Contents

Safety information......................................................................................................	iv
About this guide..........................................................................................................	iv
Package contents.......................................................................................................	vi
ASUS TUF B360-PRO GAMING specifications summary........................................	vi

Chapter 1:		Product Introduction
1.1	Before you proceed....................................................................................		1-1
1.2	Motherboard overview...............................................................................		1-1
1.3	Central Processing Unit (CPU)..................................................................		1-9
1.4	System memory........................................................................................		1-10

Chapter 2:		BIOS Information
2.1	Managing and updating your BIOS		...........................................................2-1
2.2	BIOS setup program...................................................................................		2-6
2.3	Exit menu	...................................................................................................	2-11
Appendix
Notices	.....................................................................................................................		A-1

iii

Safety information

Electrical safety

•To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.

•When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.

•Before connecting or removing signal cables from the motherboard, ensure that all power cables are unplugged.

•Seek professional assistance before using an adapter or extension cord. These devices could interrupt the grounding circuit.

•Ensure that your power supply is set to the correct voltage in your area. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company.

•If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.

Operation safety

•Before installing the motherboard and adding devices on it, carefully read all the manuals that came with the package.

•Before using the product, ensure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.

•To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets and circuitry.

•Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it may become wet.

•Place the product on a stable surface.

•If you encounter technical problems with the product, contact a qualified service technician or your retailer.

About this guide

This user guide contains the information you need when installing and configuring the motherboard.

How this guide is organized

This guide contains the following parts:

•Chapter 1: Product Introduction

This chapter describes the features of the motherboard and the new technology it supports. It includes descriptions of the switches, jumpers, and connectors on the motherboard.

•Chapter 2: BIOS Information

This chapter discusses changing system settings through the BIOS Setup menus.

iv

Where to find more information

Refer to the following sources for additional information and for product and software updates.

1.ASUS website

The ASUS website (www.asus.com) provides updated information on ASUS hardware and software products.

2.Optional documentation

Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer. These documents are not part of the standard package.

Conventions used in this guide

To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual.

DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task.

CAUTION: Information to prevent damage to the components when trying to complete a task.

IMPORTANT: Instructions that you MUST follow to complete a task.

NOTE: Tips and additional information to help you complete a task.

Typography

Bold text	Indicates a menu or an item to select.
Italics	Used to emphasize a word or a phrase.
<Key>	Keys enclosed in the less-than and greater-than sign
	means that you must press the enclosed key.
	Example: <Enter> means that you must press the Enter or
	Return key.
<Key1> + <Key2> + <Key3>	If you must press two or more keys simultaneously, the key
	names are linked with a plus sign (+).

v

Package contents

Check your motherboard package for the following items.

Motherboard	1 x ASUS TUF B360-PRO GAMING motherboard
Cables	2 x SATA 6 Gb/s cables
	1 x IO Shield
Accessories	2 x M.2 Screw Package
	1 x CPU Installation Tool
Application DVD	1 x Support DVD
	1 x User manual
Documentation	1 x TUF Certification card
	1 x TUF GAMING sticker

If any of the above items is damaged or missing, contact your retailer.

ASUS TUF B360-PRO GAMING specifications summary

		LGA1151 socket for 8th Gen Intel® Core™ Processor
		Supports 14nm CPU
	CPU	Supports Intel® Turbo Boost Technology 2.0*
		* The Intel® Turbo Boost Technology 2.0 support depends on the CPU types.
		** Refer to www.asus.com for Intel® CPU support list.
	Chipset	Intel® B360 Chipset
		4 x DIMM, max. 64GB, DDR4 2666/2400/2133 MHz, non-ECC, un-buffered
		memory
		Dual channel memory architecture
	Memory	Supports Intel® Extreme Memory Profile (XMP)
		* DDR4 2666 MHz and higher memory modules will run at max. 2666 MHz on Intel® 8th
		Gen 6-core or higher processors.
		** Refer to www.asus.com for the latest Memory QVL (Qualified Vendors List).
	Expansion	1 x PCIe 3.0/2.0 x16 slot
		1 x PCIe 3.0/2.0 x16 slot (max. at x4 mode)
	slots
		4 x PCIe 3.0/2.0 x1 slots
	Multi-GPU	Supports AMD® 2-Way/Quad-GPU CrossFireX™ Technology
	support
		Integrated Graphics ProcessorIntel® HD Graphics support
		Multi-VGA output support: HDMI/D-sub ports
		- Supports HDMI 1.4b with max. resolution 4096 x 2160@24Hz / 2560 x
	VGA	1600@60Hz
		- Supports D-sub with max. resolution 1920*1200@60Hz
		Supports Intel® InTru™ 3D/Quick Sync Video/Clear Video HD Technology/
		Insider™
		Maximum shared memory of 1024 MB (for iGPU exclusively)
		(continued on the next page)

vi

ASUS TUF B360-PRO GAMING specifications summary

Intel® B360 Chipset

-1 x M.2_1 Socket 3 with M Key, type 2242/2260/2280 storage devices support (both SATA & PCIE x2 mode)*

-1 x M.2_2 Socket 3 with M Key, type 2242/2260/2280/22110 storage devices

Storage	support (PCIE x4 mode)
	- 6 x SATA 6.0 Gb/s ports
	- Ready for Intel® Optane Memory
	* The M.2_1 socket shares SATA_2 port when using M.2 SATA mode devices. Adjust BIOS
	settings to use a SATA device.
	Intel® I219-V Gigabit LAN
	- Dual interconnect between the integrated Media Access Controller (MAC) and
LAN	physical layer (PHY)
	TUF LANGuard
	ASUS Turbo LAN Utility
	Realtek® ALC887 8-channel* high definition audio CODEC

-Exclusive DTS Custom for GAMING Headsets

-Audio Shielding: Ensures precision analog/digital separation and greatly reduces multi-lateral interference

	Audio	- Dedicated audio PCB layers: Separate layers for left and right channels to guard the
		quality of the sensitive audio signals
		- Premium Japanese audio capacitors: Provide warm, natural and immersive sound
		with exceptional clarity and fidelity.
		- Supports jack-detection and front panel jack-retasking
		Intel® B360 Chipset
		- 2 x USB 3.1 Gen 2 ports up to 10Gbps at back panel (Type-A)
	USB	- 3 x USB 3.1 Gen 1 ports up to 5Gbps (2 ports @mid-board; 1 ports @back pane
		<1C>)
		- 6 x USB 2.0 ports (2 ports @mid-board; 4 ports @back panel)
		TUF Armor
		TUF Components (TUF Cap, TUF Chokes, MOSFET & LANGuard ; certified by
		military-standard)
		ASUS TUF PROTECTION
	Exclusive	- ASUS SafeSlot Core: Fortified PCIe with solid soldering
		- ASUS ESD Guard: Enhanced ESD protection
	TUF
		- ASUS Overvoltage Protection: World-class circuit-protecting power design
	Gaming
	Features	- ASUS Stainless-Steel Back I/O: 3X corrosion-resistance for greater durability!
		- ASUS DIGI+ VRM: 4+2 Phase digital power design
		ASUS SafeSlot
		Exclusive DTS Custom for GAMING Headsets
		Turbo LAN
		(continued on the next page)

vii

ASUS TUF B360-PRO GAMING specifications summary

		Superb Performance
		M.2 onboard
		- The latest transfer technologies with up to 32Gb/s data transfer speeds
		ASUS Fan Xpert 4 Core
		- Advanced fan and liquid controls for ultimate cooling and quietness
		ASUS EPU
		- EPU
		ASUS Exclusive Features
		- AURA Sync
		- ASUS Ai Charger
	ASUS	- ASUS AI Suite 3
		EZ DIY
	Special
		EZ Update
	Features
		UEFI BIOS EZ Mode
		- Featuring friendly graphics user interface
		- ASUS CrashFree BIOS 3
		- ASUS EZ Flash 3
		File Transfer
		- Cloud GO!
		- File Transfer
		Q-Design
		- ASUS Q-LED (CPU, DRAM, VGA, Boot Device LED)
		- ASUS Q-Slot
		- ASUS Q-DIMM
	ASUS Quiet	- ASUS Fan Xpert 4 Core
	Thermal
		- Stylish Fanless Design: PCH Heat-sink & MOS Heat-sink
	Solution
		1 x D-sub port
		1 x HDMI port
		1 x PS/2 combo port
	Back Panel	1 x LAN (RJ45) port
	I/O Ports	2 x USB 3.1 Gen 2 ports (Type-A)
		1 x USB 3.1 Gen 1 Type-C™ port
		4 x USB 2.0 ports
		8-channel Audio I/O ports
		(continued on the next page)

viii

ASUS TUF B360-PRO GAMING specifications summary

			1 x USB 3.1 Gen 1 connector supports additional 2 USB ports (19-pin)
			1 x USB 2.0 connector supports additional 2 USB ports
			1 x M.2_1 Socket 3 (for M Key, type 2242/2260/2280 devices)
			1 x M.2_2 Socket 3 (for M Key, type 2242/2260/2280/22110 devices)
			6 x SATA 6.0Gb/s connectors
			1 x CPU Fan connector (support DC/PWM mode)
			1 x AIO_Pump header (4-pin)
	Internal I/O		2 x Chassis Fan connectors (4-pin) for both 3-pin(DC mode) and 4-pin(PWM
			mode) coolers control
	Connectors
			1 x Front panel audio connector (AAFP)
			1 x 24-pin EATX Power connector
			1 x 8-pin EATX 12V Power connector
			1 x System Panel
			1 x COM port
			1 x S/PDIF header
			1 x RGB header
			1 x Clear CMOS jumper
			128 Mb Flash ROM, UEFI AMI BIOS, PnP, DMI3.0, WfM2.0, SM BIOS 3.1,
	BIOS		ACPI 6.1, Multi-language BIOS, ASUS EZ Flash 3, CrashFree BIOS 3, F6 Qfan
			Control, F3 My Favorites, F4 AURA ON/OFF, F9 Search, Last Modified log, F12
			PrintScreen, and ASUS DRAM SPD (Serial Presence Detect) memory information
	Manageability		WfM 2.0, DMI 3.0, WOL by PME, PXE
			Drivers
	Support DVD		ASUS Utilities
			ASUS EZ Update
			Anti-virus software (OEM version)
	OS Support		Windows® 10 (64-bit)
	Form factor		ATX form factor: 12.0 in. x 9.29 in. (30.5 cm x 23.6 cm)

Specifications are subject to change without notice.

ix

x

Product Introduction

1

1.1Before you proceed

Take note of the following precautions before you install motherboard components or change any motherboard settings.

• Unplug the power cord from the wall socket before touching any component.

•Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.

•Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components.

1.2Motherboard overview

Place this side towards the rear of the chassis

Unplug the power cord before installing or removing the motherboard. Failure to do so can cause you physical injury and damage motherboard components.

ASUS TUF B360-PRO GAMING

1-1

1.2.1Layout contents

Connectors/Jumpers/Slots		Page
1.	ATX power connectors (24-pin EATXPWR, 8-pin EATX12V)	1-2
2.	Intel® LGA1151 CPU socket	1-3
3.	CPU, chassis, and AIO pump fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN1~2,	1-3
	4-pin AIO_PUMP FAN)
4.	DDR4 DIMM slots	1-3
5.	USB 3.1 Gen 1 connector (20-1 pin U31G1_56)	1-3
6.	M.2 sockets (M.2_1; M.2_2)	1-4
7.	Intel® B360 Serial ATA 6.0 Gb/s connector (7-pin SATA6G_1~6)	1-4
8.	System panel connector (20-3 pin PANEL)	1-4
9.	Clear RTC RAM (2-pin CLRTC)	1-5
10.	USB 2.0 connector (10-1 pin USB1114)	1-5
11.	AURA RGB header (4-pin RGB_HEADER)	1-5
12.	Serial port connector (10-1 pin COM)	1-5
13.	Front panel audio connector (10-1 pin AAFP)	1-6
14.	Digital audio connector (4-1 pin SPDIF_OUT)	1-6
15.	PCI Express 3.0/2.0 x1 slots	1-6
16.	PCI Express 3.0/2.0 x16 slots	1-6

ATX power connectors (24-pin EATXPWR, 8-pin EATX12V)

Correctly orient the ATX power supply plugs into these connectors and push down firmly until the connectors completely fit.

EATX12V

	GND	+12V DC
	GND	+12V DC
	GND	+12V DC
	GND	+12V DC
	PIN 1
	EATXPWR
+3 Volts		GND
+12	Volts	+5 Volts
+12	Volts	+5 Volts
+5V Standby		+5 Volts
Power OK		-5 Volts
	GND	GND
+5 Volts		GND
	GND	GND
+5 Volts		PSON#
	GND	GND
+3	Volts	-12 Volts
+3	Volts	+3 Volts
	PIN 1

•For a fully configured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a minimum power of 350 W. This PSU type has 24-pin and 8-pin power plugs.

•We recommend that you use a PSU with higher power output when configuring a system with more power-consuming devices or when you intend to install additional devices. The system may become unstable or may not boot up if the power is inadequate.

1-2	Chapter 1: Product Introduction