Loading...
PRIME Z370-P
Motherboard
E13411
First Edition
August 2017
Copyright © 2017 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.
Offer to Provide Source Code of Certain Software
This product contains copyrighted software that is licensed under the General Public License (“GPL”), under the Lesser General Public License Version (“LGPL”) and/or other Free Open Source Software Licenses. Such software in this product is distributed without any warranty to the extent permitted by the applicable law. Copies of these licenses are included in this product.
Where the applicable license entitles you to the source code of such software and/or other additional data, you may obtain it for a period of three years after our last shipment of the product, either
(1)for free by downloading it from http://support.asus.com/download
or
(2)for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location where you want to have it shipped to, by sending a request to:
ASUSTeK Computer Inc.
Legal Compliance Dept.
15 Li Te Rd.,
Beitou, Taipei 112
Taiwan
In your request please provide the name, model number and version, as stated in the About Box of the product for which you wish to obtain the corresponding source code and your contact details so that we can coordinate the terms and cost of shipment with you.
The source code will be distributed WITHOUT ANY WARRANTY and licensed under the same license as the corresponding binary/object code.
This offer is valid to anyone in receipt of this information.
ASUSTeK is eager to duly provide complete source code as required under various Free Open Source Software licenses. If however you encounter any problems in obtaining the full corresponding source code we would be much obliged if you give us a notification to the email address gpl@asus.com, stating the product and describing the problem (please DO NOT send large attachments such as source code archives, etc. to this email address).
ii
Contents
Safety information....................................................................................... |
iv |
About this guide.......................................................................................... |
iv |
Package contents........................................................................................ |
vi |
PRIME Z370-P specifications summary.................................................... |
vi |
Chapter 1: |
Product introduction |
|
|
1.1 |
Before you proceed...................................................................... |
1-1 |
|
1.2 |
Motherboard overview................................................................. |
1-1 |
|
1.3 |
Central Processing Unit (CPU).................................................... |
1-3 |
|
1.4 |
System memory............................................................................ |
1-7 |
|
1.5 |
Expansion slots............................................................................ |
1-9 |
|
1.6 |
Headers |
........................................................................................ |
1-10 |
1.7 |
Connectors.................................................................................. |
1-11 |
|
1.8 |
Software ........................................................................support |
1-20 |
|
Chapter 2: |
BIOS information |
|
|
2.1 |
Managing and updating your BIOS............................................. |
2-1 |
|
2.2 |
BIOS setup program..................................................................... |
2-6 |
|
2.3 |
My Favorites................................................................................ |
2-16 |
|
2.4 |
Main menu................................................................................... |
2-18 |
|
2.5 |
Ai Tweaker menu........................................................................ |
2-20 |
|
2.6 |
Advanced menu.......................................................................... |
2-28 |
|
2.7 |
Monitor menu.............................................................................. |
2-37 |
|
2.8 |
Boot menu................................................................................... |
2-41 |
|
2.9 |
Tool menu.................................................................................... |
2-45 |
|
2.10 |
Exit menu..................................................................................... |
2-46 |
|
Appendices
iii
Safety information
Electrical safety
•To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.
•When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
•Before connecting or removing signal cables from the motherboard, ensure that all power cables are unplugged.
•Seek professional assistance before using an adapter or extension cord. These devices could interrupt the grounding circuit.
•Ensure that your power supply is set to the correct voltage in your area. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company.
•If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
Operation safety
•Before installing the motherboard and adding components, carefully read all the manuals that came with the package.
•Before using the product, ensure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.
•To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets and circuitry.
•Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it may be exposed to moisture.
•Place the product on a stable surface.
•If you encounter technical problems with the product, contact a qualified service technician or your retailer.
About this guide
This user guide contains the information you need when installing and configuring the motherboard.
How this guide is organized
This guide contains the following parts:
•Chapter 1: Product introduction
This chapter describes the features of the motherboard and the new technology it supports. It includes descriptions of the switches, jumpers, and connectors on the motherboard.
•Chapter 2: BIOS information
This chapter discusses changing system settings through the BIOS Setup menus. Detailed descriptions for the BIOS parameters are also provided.
iv
Where to find more information
Refer to the following sources for additional information and for product and software updates.
1.ASUS websites
The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS contact information.
2.Optional documentation
Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer. These documents are not part of the standard package.
Conventions used in this guide
To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual.
DANGER/WARNING: Information to prevent injury to yourself when completing a task.
CAUTION: Information to prevent damage to the components when completing a task
IMPORTANT: Instructions that you MUST follow to complete a task.
NOTE: Tips and additional information to help you complete a task.
Typography
Bold text |
Indicates a menu or an item to select. |
Italics |
Used to emphasize a word or a phrase. |
<Key> |
Keys enclosed in the less-than and greater-than sign |
|
means that you must press the enclosed key. |
|
Example: <Enter> means that you must press the Enter or |
|
Return key. |
<Key1> + <Key2> + <Key3> |
If you must press two or more keys simultaneously, the key |
|
names are linked with a plus sign (+). |
v
Package contents
Check your motherboard package for the following items.
Motherboard |
ASUS PRIME Z370-P motherboard |
||
|
|
|
|
Cables |
2 x SATA 6.0 Gb/s cables |
||
|
|
|
|
Accessories |
1 x I/O Shield |
||
1 x M.2 screw package |
|||
|
|
||
Application DVD |
Support DVD |
||
Documentation |
User Guide |
||
|
|
|
|
If any of the above items is damaged or missing, contact your retailer.
PRIME Z370-P specifications summary
|
LGA1151 socket for 8th Gen Intel® Core™ processors |
|
Supports 14nm CPU |
CPU |
Supports Intel® Turbo Boost Technology 2.0* |
|
* The Intel® Turbo Boost Technology 2.0 support depends on the CPU types. |
|
** Refer to www.asus.com for Intel® CPU support list. |
Chipset |
Intel® Z370 Chipset |
|
4 x DIMM, max. 64GB DDR4 4000(O.C.)*/ 3866(O.C.)*/ 3733(O.C.)*/ 3600(O.C.)*/ |
|
3466(O.C.)*/ 3400(O.C.)*/ 3333(O.C.)*/ 3300(O.C.)*/ 3200(O.C.)*/ 3000(O.C.)*/ |
|
2800 (O.C.)*/ 2666/ 2400/ 2133 MHz, Non-ECC, Un-buffered Memory |
Memory |
Dual-channel memory architecture |
|
|
|
Supports Intel® Extreme Memory Profile (XMP) |
|
* The maximum memory frequency supported varies by processor. |
|
** Refer to www.asus.com for the latest Memory QVL (Qualified Vendors List). |
|
1 x PCI Express 3.0/2.0 x16 slot (support x16, x8/x4+x4*) |
|
1 x PCI Express 3.0/2.0 x16 slot (max. at x4 mode, compatible with PCIe x1, x2 |
Expansion |
and x4 devices) |
slots |
4 x PCI Express 3.0/2.0 x1 slots |
|
*For 3 Intel® SSDs on CPU support, install a Hyper M.2 X16 card (sold separately) into the PCIeX16_1 slot, and enable this card in BIOS.
|
Multi-GPU |
Supports AMD CrossFireX™ Technology |
|
|
Support |
||
|
|
|
|
|
|
Integrated graphics processor - Intel® HD Graphics support |
|
|
|
Multi-VGA output support: HDMI, DVI-D ports |
|
|
|
- Supports HDMI 1.4b with maximum resolution of 4096 x 2160 @ 24Hz / 2560 |
|
|
Graphics |
x 1600@60Hz |
|
|
- Supports DVI-D with maximum resolution of 1920 x 1200 @ 60Hz |
||
|
|
||
|
|
Supports Intel® InTruTM 3D, Quick Sync Video, Intel® Clear Video HD Technology, |
|
|
|
and Intel® InsiderTM |
|
|
|
Maximum shared memory of 1024 MB (for iGPU exclusively) |
|
|
|
(continued on the next page) |
|
vi
PRIME Z370-P specifications summary
Intel® Z370 Chipset with RAID 0, 1, 5, 10 and Intel Rapid Storage Technology support
|
- |
2 x M.2 Socket 3 with M Key, type 2242/2260/2280 storage devices support |
|
|
(SATA mode & x4 PCIE mode)* |
Storage |
- |
4 x SATA 6.0 Gb/s ports (gray) |
-Intel® Optane™ Memory Ready
*When a device in SATA mode is installed on the M.2_1 socket, SATA_1 port cannot be used.
LAN |
Realtek® 8111H Gigabit LAN controller supports ASUS LANGuard |
||
|
Realtek® ALC887 8-channel High Definition Audio CODEC |
||
|
- LED-illuminated design: Brighten up your build with the gorgeous illuminated |
||
|
|
audio trace path |
|
|
- Audio Shielding: Ensures precision analog/digital separation and greatly reduces |
||
|
|
multi-lateral interference |
|
Audio |
- |
Dedicated audio PCB layers: Separate layers for left and right channels to guard |
|
|
|
the quality of the sensitive audio signals |
|
|
- |
Premium Japanese audio capacitors: Provide warm, natural and immersive |
|
|
|
sound with exceptional clarity and fidelity |
|
|
- Supports jack-detection, and front panel jack-retasking |
||
|
* Use a chassis with HD audio module in the front panel to support an 8-channel audio output. |
||
|
Intel® Z370 Chipset |
||
USB |
- |
8 x USB 3.1 Gen 1 ports (4 ports at mid-board; 4 ports at back panel, blue, Type |
|
|
A) |
||
|
|
||
|
- 6 x USB 2.0/1.1 ports (4 ports at mid-board; 2 ports at back panel) |
||
|
ASUS 5X PROTECTION III |
||
|
- ASUS SafeSlot Core - Fortified PCIe with solid soldering |
||
|
- ASUS LANGuard - Protects against LAN surges, lightning strikes and static- |
||
|
|
electricity discharges |
|
|
- ASUS Overvoltage Protection - World-class circuit-protecting power design |
||
|
- ASUS Stainless Steel Back I/O - 3X corrosion-resistance for greater durability |
||
|
- |
ASUS DIGI+ VRM - 7 phase digital power design |
|
ASUS |
Superb Performance |
||
unique |
M.2 onboard |
||
features |
|||
- The latest transfer technologies with up to 32Gb/s data transfer speeds |
|||
|
|||
|
ASUS Fan Xpert 4 Core |
||
|
- Advanced fan and liquid controls for ultimate cooling and quietness |
||
|
ASUS EPU |
||
|
- |
EPU |
|
|
UEFI BIOS |
||
|
- |
Most advanced options with fast response time |
|
(continued on the next page)
vii
PRIME Z370-P specifications summary
ASUS unique features
ASUS quiet thermal solution
ASUS
Exclusive
Overclocking
Features
Rear panel I/O ports
Gaming Scenario
Audio Features
- Audio that roars on the battlefield
ASUS Exclusive Features
-ASUS AI Charger
-ASUS AI Suite 3
EZ DIY
UEFI BIOS EZ Mode
-Featuring friendly graphics user interface
-ASUS O.C. Tuner
-ASUS CrashFree BIOS 3
-ASUS EZ Flash 3
Q-Design
-ASUS Q-DIMM
-ASUS Q-Slot
Quiet Thermal Design
-ASUS Fan Xpert 4 Core
-Stylish Fanless Design: PCH heatsink and MOS heatsink solution
Precision Tweaker 2:
-vCore: Adjustable CPU Core voltage at 0.005V increment
-iGPU: Adjustable CPU Graphics voltage at 0.005V increment
-vCCIO: Adjustable Analog and Digital I/O voltage at 0.005V increment
-vCCSA: Adjustable CPU System Agent voltage at 0.1V increment
-vDRAM Bus: 160-step Memory voltage control
-vPCH: 3-step Chipset voltage control
SFS (Stepless Frequency Selection)
- BCLK/PCIE frequency tuning from 98MHz up to 538MHz at 0.1MHz increment
Overclocking Protection
- ASUS C.P.R.(CPU Parameter Recall)
1 x PS/2 keyboard/mouse combo port
1 x HDMI port
1 x DVI-D port
1 x LAN (RJ-45) port
4 x USB 3.1 Gen 1 ports (blue, Type A) 2 x USB 2.0/1.1 ports
3 x Audio jacks support 8-channel audio output*
*Use a chassis with HD audio module in the front panel to support a 8-channel audio output.
(continued on the next page)
viii
PRIME Z370-P specifications summary
|
2 x USB 3.1 Gen 1 connectors support additional 4 USB 3.1 Gen 1 ports (19-pin) |
|
|
2 x USB 2.0/1.1 connectors support additional 4 USB 2.0/1.1 ports |
|
|
2 x M.2 Socket 3 (for M Key, type 2242/2260/2280 devices) |
|
|
4 x SATA 6.0 Gb/s connectors (gray) |
|
|
1 x 4-pin CPU Fan connector for both 3-pin (DC mode) and 4-pin (PWM mode) |
|
|
CPU coolers control* |
|
|
2 x 4-pin Chassis Fan connectors for 3-pin (DC mode) and 4-pin (PWM mode) |
|
|
coolers control* |
|
Internal |
1 x AIO PUMP connector |
|
connectors |
1 x Front panel audio connector (AAFP) |
|
|
1 x System panel connector |
|
|
1 x S/PDIF out header |
|
|
1 x COM connector |
|
|
1 x 24-pin EATX power connector |
|
|
1 x 8-pin EATX 12V power connector |
|
|
1 x Clear CMOS header |
|
|
* By default, the CPU/Chassis Q-Fan control setting is set to Auto mode, which detects |
|
|
the CPU and chassis fans installed and changes the control mode automatically. |
|
|
128 Mb Flash ROM, UEFI AMI BIOS, PnP, DMI3.0, WfM2.0, SM BIOS 3.0, ACPI |
|
BIOS features |
6.0, Multi-language BIOS, ASUS EZ Flash 3, CrashFree BIOS 3, F11 EZ Tuning |
|
Wizard, F6 Qfan Control, F3 My Favorites, Last Modified log, F12 PrintScreen, and |
||
|
ASUS DRAM SPD (Serial Presence Detect) memory information |
|
Manageability |
WfM 2.0, DMI 3.0, WOL by PME, PXE |
|
|
Drivers |
|
Support DVD |
ASUS utilities |
|
EZ Update |
||
|
||
|
Anti-virus software (OEM version) |
|
OS support |
Windows® 10 (64-bit) |
|
Form factor |
ATX form factor: 12.0 in. x 8.9 in. (30.5 cm x 22.6cm) |
Specifications are subject to change without notice.
ix
x
Product introduction |
1 |
1.1Before you proceed
Take note of the following precautions before you install motherboard components or change any motherboard settings.
• Unplug the power cord from the wall socket before touching any component.
•Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.
•Hold components by the edges to avoid touching the ICs on them.
•Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that came with the component.
•Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components.
1.2Motherboard overview
Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits.
Unplug the power cord before installing or removing the motherboard. Failure to do so can cause you physical injury and damage to motherboard components.
1.2.1Placement direction
When installing the motherboard, place it into the chassis in the correct orientation. The edge with external ports goes to the rear part of the chassis as indicated in the image.
1.2.2Screw holes
Place six screws into the holes indicated by circles to secure the motherboard to the chassis.
Do not overtighten the screws! Doing so can damage the motherboard.
ASUS PRIME Z370-P |
1-1 |
Place this side towards the rear of the chassis
RTL 8111H
1.2.3Motherboard layout
|
|
1 |
2 |
3 |
|
2 |
|
|
4 |
|
|
|
|
|
|
|
|
|
22.6cm(8.9in) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CPU_FAN |
|
|
|
|
|
|
|
|
|
KBMS_USB910 |
|
|
|
|
|
DIGI+ |
|
|
|
|
|
|
|
|
|
|
EATX12V |
|
|
|
EPU |
|
|
|
|
|
|
|
|
|
|
|
|
|
AIO_PUMP |
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
CHA_FAN1 |
||
DVI |
|
|
|
|
|
|
|
(64bit, 288-pin module) |
(64bit, 288-pin module) |
(64bit, 288-pin module) |
(64bit, 288-pin module) |
|
|
2 |
|
|
|
|
|
LGA1151 |
|
|
|
|
|
||||
HDMI |
|
|
|
|
|
|
|
B1 |
B2 |
A1 |
A2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
DDR4 DIMM_ |
DDR4 DIMM_ |
DDR4 DIMM_ |
DDR4 DIMM_ |
EATXPWR |
|
1 |
U31G1_78 |
|
|
|
|
|
|
|
|
|
|||||
LAN_U31G1_56 |
LANGuard |
|
|
|
|
|
|
|
|
|||||
AUDIO |
CHA_FAN2 |
|
|
2(SOCKET3) |
|
|
5 |
|||||||
|
|
|
|
|
|
|
||||||||
|
PCIEX1_1 |
2280 |
2260 |
2242 |
|
|
30.5cm(12.0in) |
|||||||
|
|
|
|
|
|
M.2 |
|
|
|
|
|
U31G1_12 |
||
|
|
|
|
|
|
|
PCIE |
SATA IRST |
|
|
|
|
|
|
|
|
|
|
|
|
|
X4 |
V |
V |
|
|
|
|
|
|
|
|
|
|
|
|
M.2_1(SOCKET3) |
|
|
|
|
|
||
|
|
|
PCIEX16_1 |
|
|
|
|
|
|
|
|
|
|
|
RTL |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
8111H |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Lithium Cell |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CMOS Power |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Intel® |
|
|
|
|
6 |
|
|
|
|
Super |
|
|
|
|
Z370 |
|
|
|
|
|
|
|
PCIEX1_2 |
|
I/O |
|
|
|
|
|
|
|
|
|
|
|
|
|
PCIEX16_2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
M.22(SOCKET3) |
PCIE SATA IRST |
V |
|
|
PCIEX1_3 |
|
|
|
|
|
|
|
|
|
V |
||
|
|
|
|
|
|
|
|
|
|
|
|
|||
ALC |
|
|
|
|
2280 |
2260 |
2242 |
|
|
|
|
X4 |
||
887 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PCIE_X1_4 |
|
CLRTC |
128Mb |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BIOS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SATA6G_3 SATA6G_4 |
|
7 |
|||
|
|
SPDIF_OUT |
COM |
USB1112 USB1314 |
U31G1_34 |
|
|
SATA6G_1 |
SATA6G_2 |
|
||||
|
|
AAFP |
|
|
|
PANEL |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
13 |
12 |
11 10 |
9 |
5 |
8 |
|
|
|
|
|
|
||
1-2 |
Chapter 1: Product introduction |
1.2.4Layout contents
Connectors/Jumpers/Slots/LED |
Page |
|
1. |
ATX power connectors (24-pin EATXPWR, 8-pin ATX12V) |
1-15 |
2. |
CPU, AIO pump, and chassis fan connectors (4-pin CPU_FAN, 4-pin AIO_ |
1-18 |
|
PUMP, and 4-pin CHA_FAN1/2) |
|
|
|
|
3. |
Intel® LGA1151 CPU socket |
1-3 |
4. |
DDR4 DIMM slots |
1-7 |
5. |
USB 3.1 Gen 1 connectors (20-1 pin U31G1_12, U31G1_34) |
1-14 |
6. |
M.2 Socket 3 [M.2_1(Socket 3); M.2_2(Socket 3)] |
1-17 |
7. |
Intel® Z370 SATA 6.0 Gb/s connectors (7-pin SATA6G_1-4) |
1-16 |
8. |
System panel connector (20-5 pin PANEL) |
1-19 |
9. |
USB 2.0 connectors (10-1 pin USB1112, USB1314) |
1-13 |
10. |
Clear RTC RAM (2-pin CLRTC) |
1-10 |
11. |
Serial port connectors (10-1 pin COM) |
1-13 |
12. |
Front panel audio connector (10-1 pin AAFP) |
1-16 |
13. |
Digital audio connector (4-1 pin SPDIF_OUT) |
1-14 |
1.3Central Processing Unit (CPU)
This motherboard comes with a surface mount LGA1151 socket designed for the 8th Gen Intel® Core™ processors.
PRIME Z370-P CPU socket LGA1151
Unplug all power cables before installing the CPU.
ASUS PRIME Z370-P |
1-3 |
•Ensure that you install the correct CPU designed for the LGA1151 socket only. DO
NOT install a CPU designed for LGA1150, LGA1155 and LGA1156 sockets on the LGA1151 socket.
•Upon purchase of the motherboard, ensure that the PnP cap is on the socket and the socket contacts are not bent. Contact your retailer immediately if the PnP cap is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components.
•Keep the cap after installing the motherboard. ASUS will process Return Merchandise Authorization (RMA) requests only if the motherboard comes with the cap on the LGA1151 socket.
•The product warranty does not cover damage to the socket contacts resulting from incorrect CPU installation/removal, or misplacement/loss/incorrect removal of the PnP cap.
1.3.1Installing the CPU
1
A
B
2 |
3 |
1-4 |
Chapter 1: Product introduction |
4 |
C |
5 |
|
A |
|
1.3.2CPU heatsink and fan assembly installation
Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan if necessary.
ASUS PRIME Z370-P |
1-5 |
To install the CPU heatsink and fan assembly
1 A 2
B
B
A
3 |
4 |
To uninstall the CPU heatsink and fan assembly
1 |
2 |
A
B B 
A
1-6 |
Chapter 1: Product introduction |
1.4System memory
1.4.1Overview
This motherboard comes with four Double Data Rate 4 (DDR4) Dual Inline Memory Module (DIMM) sockets. A DDR4 module is notched differently from a DDR, DDR2, or DDR3 module. DO NOT install a DDR, DDR2, or DDR3 memory module to the DDR4 slot.
According to Intel® CPU spec, DIMM voltage below 1.35 V is recommended to protect the CPU.
DIMM B1 DIMM B2 DIMM A1 DIMM A2 |
PRIME Z370-P 288-pin DDR4 DIMM sockets |
1.4.2Memory configurations
You may install 2 GB, 4 GB, 8 GB, and 16 GB unbuffered non-ECC DDR4 DIMMs into the DIMM sockets. You can refer to the recommended memory population below.
Recommended memory configurations
•You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration. Any excess memory from the higher-sized channel is then mapped for single-channel operation.
•According to Intel® CPU spec, DIMM voltage below 1.35V is recommended to protect the CPU.
•When using one DIMM, install it into slot A2 for better memory compatibility and performance
ASUS PRIME Z370-P |
1-7 |
• The default memory operation frequency is dependent on its Serial Presence Detect (SPD), which is the standard way of accessing information from a memory module. Under the default state, some memory modules for overclocking may operate at a lower frequency than the vendor-marked value. To operate at the vendor-marked or at a higher frequency, refer to section 2.5 Ai Tweaker menu for manual memory frequency adjustment.
•Always install the DIMMS with the same CAS Latency. For an optimum compatibility, we recommend that you install memory modules of the same version or data code (D/C) from the same vendor. Check with the vendor to get the correct memory modules.
•For system stability, use a more efficient memory cooling system to support a full memory load (4 DIMMs) or overclocking condition.
Visit the ASUS website at www.asus.com for the latest QVL.
1.4.3Installing a DIMM
1
A
2
A
B
To remove a DIMM
B
A
1-8 |
Chapter 1: Product introduction |
1.5Expansion slots
In the future, you may need to install expansion cards. The following sub sections describe the slots and the expansion cards that they support.
Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components.
1.5.1Installing an expansion card
To install an expansion card:
1.Before installing the expansion card, read the documentation that came with it and make the necessary hardware settings for the card.
2.Remove the system unit cover (if your motherboard is already installed in a chassis).
3.Remove the bracket opposite the slot that you intend to use. Keep the screw for later use.
4.Align the card connector with the slot and press firmly until the card is completely seated on the slot.
5.Secure the card to the chassis with the screw you removed earlier.
6.Replace the system cover.
1.5.2Configuring an expansion card
After installing the expansion card, configure it by adjusting the software settings.
1.Turn on the system and change the necessary BIOS settings, if any. See Chapter 2 for information on BIOS setup.
2.Assign an IRQ to the card.
3.Install the software drivers for the expansion card.
When using PCI cards on shared slots, ensure that the drivers support “Share IRQ” or that the cards do not need IRQ assignments. Otherwise, conflicts will arise between the two PCI groups, making the system unstable and the card inoperable.
1.5.3PCI Express 3.0 x1 slots
This motherboard supports PCI Express 3.0 x1 network cards, SCSI cards, and other cards that comply with the PCI Express specifications.
1.5.4PCI Express 3.0 x16 slots
This motherboard has two PCI Express 3.0 x16 slots (x16 + x4 mode) that support PCI Express 3.0 x16 graphic cards complying with the PCI Express specifications.
ASUS PRIME Z370-P |
1-9 |
|
PCI Express operating mode |
|
VGA configuration |
PCIe 3.0 x16_1 (gray) |
PCIe 3.0 x16_2 (black, |
|
x4 mode) |
|
|
|
|
Single VGA/PCIe card |
x16 (Recommended for single |
N/A |
|
VGA card) |
|
Dual VGA/PCIe cards |
x16 |
x4 |
•In single VGA card mode, use the PCIe 3.0 x16_1 slot (gray) for a PCI Express x16
graphics card to get better performance.
•We recommend that you provide sufficient power when running CrossFireX™ mode.
•Connect a chassis fan to the motherboard connector labeled CHA_FAN1/2 when using multiple graphics cards for better thermal environment.
Hyper M.2 X16 card |
PCI Express 3.0 operating mode |
|
configuration |
PCIe 3.0 x16_1 (gray) |
PCIe 3.0 x16_2 (black) |
3 Intel® SSDs on CPU support |
x8+x4+x4 |
N/A |
•Hyper M.2 X16 card is purchased separately.
•Enable the Hyper M.2 X16 card under BIOS settings.
1.6Headers
1.Clear RTC RAM (2-pin CLRTC)
This header allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which include system setup information such as system passwords.
CLRTC
+3V_BAT GND
PIN 1
PRIME Z370-P Clear RTC RAM
1-10 |
Chapter 1: Product introduction |
To erase the RTC RAM:
1.Turn OFF the computer and unplug the power cord.
2.Use a metal object such as a screwdriver to short the two pins.
3.Plug the power cord and turn on the computer.
4.Hold down the <Del> key during the boot process and enter BIOS setup to reenter data.
If the steps above do not help, remove the onboard battery and short the two pins again to clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the battery.
1.7Connectors
1.7.1Rear panel connectors
|
|
1 |
2 |
|
|
|
3 |
4 |
|
||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
9 |
8 |
7 |
6 |
5 |
1.PS/2 keyboard/mouse combo port. This port is for a PS/2 keyboard or PS/2 mouse.
2.LAN (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN) through a network hub.
LAN port LED indications
Activity/Link LED |
Speed LED |
||
Status |
Description |
Status |
Description |
Off |
No link |
OFF |
10Mbps connection |
Orange |
Linked |
ORANGE |
100Mbps connection |
Orange |
Data activity |
GREEN |
1Gbps connection |
(Blinking) |
|
|
|
Orange |
Ready to |
_ |
_ |
(Blinking then |
wake up from |
|
|
steady) |
S5 mode |
|
|
Activity Link |
Speed |
||
LED |
LED |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LAN port
ASUS PRIME Z370-P |
1-11 |
3.Line In port (light blue). This port connects to the tape, CD, DVD player, or other audio sources.
4.Line Out port (lime). This port connects to a headphone or a speaker. In the 4.1, 5.1 and 7.1-channel configurations, the function of this port becomes Front Speaker Out.
5.Microphone port (pink). This port connects to a microphone.
Refer to the audio configuration table for the function of the audio ports in 2.1, 4.1, 5.1, or 7.1-channel configuration.
Audio 2.1, 4.1, 5.1, or 7.1-channel configuration
Port |
Headset |
4.1-channel |
5.1-channel |
7.1-channel |
|
2.1-channel |
|||||
|
|
|
|
||
Light Blue (Rear panel) |
Line In |
Rear Speaker Out |
Rear Speaker Out |
Rear Speaker Out |
|
Lime (Rear panel) |
Line Out |
Front Speaker Out |
Front Speaker Out |
Front Speaker Out |
|
Pink (Rear panel) |
Mic In |
Mic In |
Bass/Center |
Bass/Center |
|
Lime (Front panel) |
- |
- |
- |
Side Speaker Out |
To configure a 7.1-channel audio output:
Use a chassis with HD audio module in the front panel to support a 7.1-channel audio output.
6.USB 3.1 Gen 1 ports (Blue, Type A). These 9-pin Universal Serial Bus (USB) ports are for USB 3.1 Gen 1 devices.
• We strongly recommend that you connect USB 3.1 Gen 1 devices to USB 3.1 Gen 1 ports for faster and better performance from your USB 3.1 Gen 1 devices.
•Due to the design of the Intel® 300 series chipset, all USB devices connected to the USB 2.0 and USB 3.1 Gen 1 ports are controlled by the xHCI controller. Some legacy USB devices must update their firmware for better compatibility.
7.HDMI port. This port is for a High-Definition Multimedia Interface (HDMI) connector, and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other protected content.
8.DVI-D port. This port is for any DVI-D compatible device.
DVI-D can not be converted to output from RGB Signal to CRT and is not compatible with DVI-I.
9.USB 2.0 ports. These 4-pin Universal Serial Bus (USB) ports are for USB 2.0/1.1 devices.
1-12 |
Chapter 1: Product introduction |
1.7.2Internal connectors
1.Serial port connector (10-1 pin COM)
This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis.
COM
CTS
DSR
DTR
RXD
PIN 1
DCD TXD GND RTS RI
PRIME Z370-P Serial port (COM) connector
The COM module is purchased separately.
2.USB 2.0 connectors (10-1 pin USB1112, USB1314)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specifications and supports up to 480Mbps connection speed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
USB1112 |
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
USB+5V USB P11USB P11+ |
GND NC |
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PIN 1 |
USB+5V USB P12USB P12+ |
GND |
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
PRIME Z370-P USB2.0 connectors
USB1314
|
|
USB+5V USB_P13USB_P13+ |
GND NC |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PIN 1 |
USB+5V USB P14USB P14+ |
GND |
|||||
|
|
||||||
Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!
The USB 2.0 module is purchased separately.
ASUS PRIME Z370-P |
1-13 |
3.USB 3.1 Gen 1 connectors (20-1 pin U31G1_12, U31G1_34)
These connectors allow you to connect a USB 3.1 Gen 1 module for additional USB 3.1 Gen 1 front or rear panel ports. With an installed USB 3.1 Gen 1 module, you can enjoy all the benefits of USB 3.1 Gen 1 including faster data transfer speeds of up to 5 Gbps, faster charging time for USB-chargeable devices, optimized power efficiency, and backward compatibility with USB 2.0.
A
B
A
U31G1_12
PIN 1
USB3+5V USB3+5V IntA_P1_SSRX-
IntA_P2_SSRX- 
IntA_P1_SSRX+
IntA_P2_SSRX+ 
GND
GND 
IntA_P1_SSTX-
IntA_P2_SSTX- 
IntA_P1_SSTX+
IntA_P2_SSTX+ 
GND
GND 
IntA_P1_D-
IntA_P2_D- 
IntA_P1_D+
IntA_P2_D+ 
GND
B
U31G1_34
P1_IntA P1_IntAGNDP1_IntA P1_IntAGNDP1_IntA P1_IntAGND USB3+5V____D__ SSRXSSTX-D+ -SSRX+-SSTX+
PIN 1
_IntA_IntA _IntA_IntA _P2_P2 _P2_P2 P2_IntA P2_IntA SSRXSSTXD__ USB3+5V-SSRX+GND-SSTX+GND-D+
PRIME Z370-P USB 3.1 Gen 1 Front panel connectors
The USB 3.1 Gen 1 module is purchased separately.
4.Digital audio connector (4-1 pin SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect the S/PDIF Out module cable to this connector, then install the module to a slot opening at the back of the system chassis.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
+5V |
SPDIFOUT GND |
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SPDIF_OUT
PRIME Z370-P Digital audio connector
The S/PDIF module is purchased separately.
1-14 |
Chapter 1: Product introduction |
5.ATX power connectors (24-pin EATXPWR, 8-pin ATX12V)
These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.
A |
A |
|
|
B |
|
|
|
|
|
|
EATX12V |
|
EATXPWR |
|
|
DC DC DC DC |
+3 Volts |
GND |
|
|
+12V +12V +12V +12V |
+12 |
Volts |
+5 Volts |
B |
+12 |
Volts |
+5 Volts |
|
|
|
+5V Standby |
+5 Volts |
|
|
|
Power OK |
-5 Volts |
|
|
PIN 1 |
|
GND |
GND |
|
GND GND GND GND |
+5 Volts |
GND |
|
|
|
GND |
GND |
|
|
|
+5 Volts |
PSON# |
|
|
|
|
GND |
GND |
|
|
+3 |
Volts |
-12 Volts |
|
|
+3 |
Volts |
+3 Volts |
|
|
|
PIN 1 |
|
PRIME Z370-P ATX power connectors
•For a fully configured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a minimum power of 350 W.
•DO NOT forget to connect the 4-pin/8-pin ATX +12V power plug. Otherwise, the system will not boot up.
•We recommend that you use a PSU with higher power output when configuring a system with more power-consuming devices or when you intend to install additional devices. The system may become unstable or may not boot up if the power is inadequate.
•If you are uncertain about the minimum power supply requirement for your system, refer to the Recommended Power Supply Wattage Calculator at http://support.asus. com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details.
ASUS PRIME Z370-P |
1-15 |
Loading...