APPLE INC.
NONE
SCALE
REV.
A
D
C
B
A
D
C
B
8 7
6
5
4
3
2 1
8
7 6
5
4
3
2
1
THE INFORMATION CONTAINED HEREIN IS THE PROPRIETARY
PROPERTY OF APPLE COMPUTER, INC. THE POSSESSOR
AGREES TO THE FOLLOWING
II NOT TO REPRODUCE OR COPY IT
III NOT TO REVEAL OR PUBLISH IN WHOLE OR PART
I TO MAINTAIN THE DOCUMENT IN CONFIDENCE
NOTICE OF PROPRIETARY PROPERTY
DRAWING NUMBER
SHT
OF
SIZE
D
- CHANGE R1440 TO 150_5% AND NO STUFF
- RTC FOLLOW M97 DESIGN AND USE SUPERCAP SOLUTION
- MCP S0 PWRGD FOLLOW M97 DESIGN
- R2872 CHANGE TO 0OHM
- J6700 CHANGE FROM 514-0521 TO 514-0667
- DELETE L4502, NET SATA_HDD_D2R_UF_P / SATA_HDD_D2R_UF_N
- J3900 CHANGE FROM 514-0523 TO 514-0668
- J9401 CHANGE FROM 514-0517 TO 514-0665
- J6950 CHANGE FROM 516S0620 TO 516S0735
*****2008/11/06*****
- U5413 CHANGE FROM 353S1432 TO 353S2220
- R7417 CHANGE FROM 5.36K(114S0289) TO 4.42K(114S0280)
*****2008/11/12*****
- U1000 CHANGE FROM 373S3646 TO 373S3702
- NETNAME ENET_INTR_L CHANGE TO TP_ENET_INTR_L.
- DELETE R1987,R1988,R1995,R1970,R1971,R1972,R1973,R1996,R1997,R1998,R1999,R1978,R1979
- NET LVDSMUX_SEL_IG_L SYNC M97 NETNAME
- REMOVE NET DIMM_OVERTEMPA_L
- REMOVE NET DIMM_OVERTEMPA_L
PAGE 42:
- ADD SMC_EXCARD_PWR_EN TO TP_SMC_EXCARD_PWR_EN
- ADD SMC_RSTGATE_L TO TP_SMC_RSTGATE_L
- ADD ALS_GAIN TO NC_ALS_GAIN
- PULL R3240 DOWN TO GND. PULL R3241 HIGH
- C6832, C6833 CHANGE FROM 127S0062 TO 127S0108
- L4501 / Fl4520 / FL4525 CHANGE FROM 155S0303 TO 155S0371
- DELETE PHYSICAL/SPACING SETTING OF SATA_HDD_D2R_UF_P / SATA_HDD_D2R_UF_N
PAGE 4:
PAGE 68:
PAGE 62:
*****2008/10/31*****
PAGE 41:
*****2008/08/25*****
CHANGE CSA BASE ON WILL’S SUGGESTION.
- NET DPMUX_SEL_IG_L SYNC M97 NETNAME
- NET DPMUX_LOWPWR_L SYNC M97 NETNAME AUD_IPHS_SWITCH_EN
- ENET_PWRDWN_L CHANGE TO TP_ENET_PWRDWN_L
(FOLLOW M97 DESIGN).
*****2008/10/30*****
- J6950 516S0735 CHANGE TO 516S0620
PAGE 69:
- C7321 FROM 128S0111(POLY) CHANGE TO 128S0218 (POLY,CASE-D2E-SM)
- XDP FOLLOW M97 DESIGN. CONNECTOR FROM 998-1571 CHANGE TO 516S0625.
- C7040/C7041/C7047 CHANGE TO 138S0614
- L9002 CHANGE TO 116S0004(0ohm,5%,0402)
- C9003 CHANGE TO 116S0004(0ohm,5%,0402)
NOTE: All page numbers are .csa, not PDF. See page 1 for .csa -> PDF mapping.
- STUFF C5250/C5251/C5270/C5271/C5260/C5261/C5280/C5281
- J6700 514-0604 CHANGE TO HF APN 514-0521
- I2C_ALS_SDA CHANGE TO I2C_MINI_PCIE_SDA
- I2C_ALS_SCL CHANGE TO I2C_MINI_PCIE_SCL
- ADD C5250/C5251/C5270/C5271/C5260/C5261/C5280/C5281 131S1104 (22pF,5%,0402) NO STUFF
- J3400 516S0635 CHANGE TO HF APN 516S0729
- R2825/R2826 CHANGE TO 116s0004 (0 OHM,5%,0402)
- R1950/R1951/R1952/1953 CHANGE TO 116s0004 (0 OHM,5%,0402)
- TEXT "ALS" CHANGE TO "MINI-PCIE"
- J6750 514-0603 CHANGE TO HF APN 514-0519
- J6950 516S0620 CHANGE TO HF APN 516S0735
*****2008/10/25*****
PAGE 52:
- TP_RTL8211_CLK125 CHANGE TO RTL8211_CLK125
- ADD R3731 (116s0026 22 ohm 5% 0402) FOR EMI 125MHZ NOISE
- C6830/C6831 CHANGE TO APN 128S0220, and REMOVE BOMOPTION OMIT
- C6605 CHANGE TO APN 128s0148, HF APN 128s0221, and REMOVE BOMOPTION OMIT
- C6601/C6603 CHANGE TO APN 128S0135, and REMOVE BOMOPTION OMIT
PAGE 67:
PAGE 69:
- C7281, C7241, C7272 FROM 138S0555(603) CHANGE TO 138S0615(603-1)
- C7291, C7292, C7252, C7251 FROM 128S0115(POLY,CASE-B2) CHANGE TO
- Q7400, Q7402 FROM 376S0472 CHANGE TO 376S0617.
- C7280, C7240 FROM 128S0092(POLY) CHANGE TO 128S0128(POLY-TANT)
PAGE 9:
- ADD ESTARLDO_EN TO NC_ESTARLDO_EN
PAGE 29:
PAGE 28:
Revision History
PLAGE 23:
- CHANGE XDP_TDO_CONN TO XDP_TDO
PAGE 29:
PAGE 14:
- R7859 CHANGE TO 100 OHM.
PAGE 64:
PAGE 61:
PAGE 39:
PAGE 32,33,34
PAGE 44:
PAGE 68:
*****2008/08/23*****
PAGE 6:
- REMOVE ETHERNET CIRCUIT.
PAGE 9:
- REMOVE R3400, R3401
- L3401 FROM NO STUFF CHANGE TO STUFF.
PAGE 39
PAGE 41:
PAGE 46:
- SMC_NB_CORE_ISENSE CHANGE TO SMC_MCP_CORE_ISENSE
- R5417 ADD BOM OPTION FOR NO STUFF
PAGE 50:
- ADD C5926 (10UF,20%.0603) TO =PP3V3_S3_SMS
PAGE 63:
PAGE 66:
- REMOVE R9010, R9011
*****2008/08/24*****
PAGE 6:
PAGE 13:
- =P3V3ENET_EN_L LINK TO PM_SLP_RMGT_L
- ADD =RTL8211_ENSWRE LINK TO GND.
- DELETE R4699.
PAGE 8:
- REMOVE USB_PWR_EN_S3
PAGE 31:
PAGE 13:
- =P1V05ENET_EN LINK TO PM_SLP_RMGT_L
- DELETE R2400~R2413 FOR MCP A01 VERSION.
- SMC_NB_CORE_ISENSE CHANGE TO SMC_MCP_CORE_ISENSE
- SMC_NB_DDR_ISENSE CHANGE TO SMC_MCP_DDR_ISENSE
- R4690 FROM NO STUFF CHANGE TO STUFF.
- R5416 ADD BOM OPTION FOR NO STUFF
- SMC_NB_DDR_ISENSE CHANGE TO SMC_MCP_DDR_ISENSE
PAGE 10:
- ADD =RTL8211_REGOUT LINK TO NC_RTL8211_REGOUT.
- C7601 FROM 138S0578 CHANGE TO 138S0614.
- Q7620 FROM 376S0512 CHANGE TO 376S0652.
PAGE 62:
- C7560 FROM 128S0092 CHANGE TO 128S0218.
- Q7500 FROM 376S0512 CHANGE TO 376S0652.
- L7500 FROM 152S0869 CHANGE TO 152S0685.
PAGE 61:
- XW7400 ADD BOMOPTION OMIT.
PAGE 60:
- C7343 FROM 128S0073 CHANGE TO 128S0233.
PAGE 59:
PAGE 18:
PAGE 25:
PAG3 35:
PAGE 58:
- Q7260, Q7261 FROM 376S0512 CHANGE TO 376S0652 (H-F)
128S0222(POLY,CASE-B2-SM)
PAGE 57:
PAGE 65:
*****2008/08/22*****
- R1410 CHANGE TO 49.9 OHM
- ADD =PP3V42_G3H_RTC_D LINK TO =PP3V42_G3H_REG
PAGE 8:
PAGE 7:
- R7011 CHANGE TO 9.31K OHM, 1%
*****2008/08/21*****
- R7879 CHANGE TO 100K OHM.
- ADD SMC_EXCARD_PWR_EN TEST_POINT
PAGE 43:
- ADD SMC_ANALOG_ID TO NC_SMC_ANALOG_ID
- ADD SMC_SYS_KBDLED TO NC_SMC_SYS_KBDLED
- ADD R5054 10KOHM LINK SMC_GPU_ISENSE PULL DOWN TO GND.
- R5142 CHANGE TO NO STUFF.
PAGE 46:
- ADD =PP1V05_ENET_PHY LINK TO PP1V2R1V05_ENET.
- ADD =PP3V3_S5_P3V3ENETFET LINK TO PP3V3_S5
MODIFY ALL NOSTUFF TO NO STUFF.
- ADD R5055 10KOHM LINK SMC_NB_MISC_ISENSE PULL DOWN TO GND.
PAGE 19:
PAGE 18:
- DELETE 1.05V S0 FET CIRCUIT.
- U7500 PIN TONSEL LINK TO GND DIRECTLY.
- U7500 PIN V5DRV1 LINK TO PP5V_S0_MCPREG_VCC.
- ADD =PP3V3_ENET_PHY_VDDREG LINK TO TP_PP3V3_ENET_PHY_VDDREG.
- FOLLOW M97 DESIGN
PAGE 26:
PAGE :
PAGE 57:
- R5417 CHANGE TO 4.53K AND DELETE BOM OPTION.
- R5416 CHANGE TO 4.53K AND DELETE BOM OPTION.
*****2008/09/02*****
PAGE 66:
- REMOVE R7884 AND C7884
- XDP FOLLOW M98 DESIGN. CONNECTOR FROM 516S0625 CHANGE TO 998-1571.
PAGE 66:
PAGE 29:
- ADD STANDOFF 860-0749 X 1
- ADD STANDOFF 860-0723 X 1
- ADD STANDOFF 860-0964 X 4
PAGE 45:
- R1860 AND R1861 CHANGE TO PAGE 68.
- C2504-C2507 FROM 138S0578(402) CHANGE TO 138S0614(402-1)
- C2516-C2517 FROM 138S0578(402) CHANGE TO 138S0614(402-1)
- R4150 FROM 118S0343 (0201) CHANGE TO 116S0056(0402)
- R0602 BOMOPTION FROM JTAG_1DEV CHANGE TO NO STUFF.
- Q7320 FROM 376S0512 CHANGE TO 376S0652 (H-F)
- REMOVE ALT TABLE
- REMOVE ALT TABLE
PAGE 94:
PAGE 74:
PAGE 50:
PAGE 29:
*****2008/10/20*****
*****2008/10/22*****
PAGE 37:
PAGE 90:
PAGE 48:
- C4803 CHANGE TO 138S0614
- C6605 CHANGE TO HF APN 128S0221
PAGE 66:
PAGE 70:
PAGE 52:
PAGE 28:
PAGE 28:
PAGE 12:
PAGE 72:
PAGE 68:
PAGE 9:
*****2008/09/27*****
- CHANGE ODD CONNECTOR FROM 516S0720 TO 516S0719
- REMOVE J9001 PIN 20 AND PIN21 NET.
- R5418 CHANGE TO 4.53K AND DELETE BOM OPTION.
- REMOVE BOMOPTION TABLE OF R2903/R2905/R2909/R2911
- REMOVE K36 BOM OPTION TABLE AND ALT TABLE
- C2870 CHANGE TO 138S0614
- C1200 ~ C1219 CHANGE TO 138S0580
- R7272 CHANGE FROM 57.6K 1%(114s0389) TO 75K 1%(114s0399)
- ADD R2903/R2905 BOMOTION AND CHANGE VALUE TO 200 OHM
*****2008/10/24*****
PAGE 19:
PAGE 34:
- Q7321 FROM 376S0511 CHANGE TO 376S0651 (H-F)
PAGE 34:
- J3400 516S0729 CHANGE TO 516S0635
*****2008/10/28*****
*****2008/11/01*****
- U4100 CHANGE FROM 338S0523 TO 338S0654
PAGE 45:
*****2008/11/05*****
- ADD GMUX_JTAG_TMS AND GMUX_JTAG_TDI IN MISC NC MCP79 ALIASES.
- BOM change U1400 CHANGE FROM 338S0678 TO 338S0702
- C6210 CHANGE FROM 127S0062 TO 127S0108
PAGE 102:
- NETNAME FROM CHGR LOWCURRENT GATE CHANGE TO CHGR_LOWCURRENT_GATE
- NETNAME FROM CHGR LOWCURRENT REF CHANGE TO CHGR_LOWCURRENT_REF
- CHANG C9442 AND C9443 TO 47PF
- CHANGE R9460,R9461 TO 0OHM,
- ADD C9480 0.1UF_16V_0402 FROM GND_CHASSIS_TMDS_DOWN TO GND
- CHANGE R9462, R9463 TO 2.7KOHM
- CHANGE C9411, C9412 TO 220PF
- R5280/R5281 = 1K (FOLLOW M97D)
- R5270/R5271 = 1K (FOLLOW M97D)
- D4600/D4601/PIN-6 CONNECT TO USB VBUS (FOLLOW M97D)
- J6750 CHANGE FROM 514-0519 TO 514-0666
*****2008/11/19*****
- J4600, J4601 CHANGE FROM 514-0527 TO 514-0669
- U3700 CHANGE FROM 338S0570 TO 338S0694
*****2008/11/26*****
- PAGE 61 NOTE : CORRECT REFERENCE TO R5164 AND R5144
- J3400 CHANGE TO 516S0729
- R5156, R5157, R5158 change from 0 to 33 ohm, 5%, 0402(116s0030)
*****2008/12/20*****
- U4900 symbol update
*****2008/12/17*****
- R5144 and R5164 changed to 10K 5% 0402 (116S0090)
*****2008/12/12*****
051-8089
02
SYNC_MASTER=K36B_MLB
109
5
02