2006
Table of contents
Loading...
iPod
Features Guide
2
Contents
Chapter 1 4 iPod Basics
5
iPod at a Glance
5
Using iPod Controls
8
Disabling iPod Controls
9
Using iPod Menus
10
Connecting and Disconnecting iPod
13
About the iPod Battery
Chapter 2 16 Music Features
16
About iTunes
17
Importing Music into Your Computer
20
Organizing Your Music
21
Loading Music and Podcasts onto iPod
24
Playing Music
29
Listening to Podcasts
30
Listening to Audiobooks
30
Listening to FM Radio
Chapter 3 31 Video Features
31
Purchasing Videos and Downloading Video Podcasts
32
Converting Your Own Videos to Work With iPod
33
Loading Videos onto iPod
35
Viewing and Listening to Videos
Chapter 4 38 Photo Features
38
Importing Photos
43
Viewing Photos
Chapter 5 45 Extra Features and Accessories
45
Using iPod as an External Disk
46
Using Extra Settings
50
Syncing Contacts, Calendars, and To-Do Lists
52
Storing and Reading Notes
52
Recording Voice Memos
2
53
Learning About iPod Accessories
Chapter 6 55 Tips and Troubleshooting
55
General Suggestions
61
Updating and Restoring iPod Software
Chapter 7 62 Safety and Cleaning
62
Important Safety Information
64
Important Handling Information
Chapter 8 65 Learning More, Service, and Support
Index 68
Contents
3
1
iPod Basics
1
Congratulations on purchasing iPod. Read this section to
learn about the features of iPod, how to use its controls, and
more.
To use iPod, you put music, videos, photos, and other files on your computer and then
load them onto iPod.
iPod is a music player and much more. Use iPod to:
Â
Sync songs, videos, and digital photos for listening and viewing on the go
Â
Listen to podcasts, downloadable radio-style shows delivered over the Internet
Â
View video on iPod or a TV, using the optional iPod AV Cable
Â
View photos as a slideshow with music on iPod, or a TV using the optional iPod
AV Cable
Â
Listen to audiobooks purchased from the iTunes Store or audible.com
Â
Store or back up files and other data, using iPod as an external disk
Â
Sync contact, calendar, and to-do list information from your computer
Â
Play games, store text notes, set an alarm, and more
4
iPod at a Glance
Get to know the controls on iPod:
Hold switch
Menu button
Previous/Rewind
button
Click Wheel
Headphones port
Center button
Next/Fast-forward
button
Play/Pause button
Dock connector port
Using iPod Controls
The controls on iPod are easy to find and use. Press any button to turn on iPod. The
main menu appears.
Use the Click Wheel and Center button to navigate through onscreen menus, play
songs, change settings, and view information. Move your thumb lightly around the
Click Wheel to select a menu item. To choose the item, press the Center button. To go
back to the previous menu, press Menu on the Click Wheel.
Chapter 1
iPod Basics
5
Here’s what else you can do with iPod controls.
To Do this
Turn on iPod
Turn off iPod
Turn on the backlight
Disable the iPod controls
(so nothing happens if you press
them accidentally)
Reset iPod
(if iPod isn’t responding)
Choose a menu item
Go back to the previous menu
Go directly to the main menu
Browse for a song
Browse for a video
Play a song or video
Pause a song or video
Change the volume
Play all the songs in a list
Play all songs in random order
Skip to any point in a song or
video
Skip to the next song, video,
or chapter in an audiobook
or podcast
Start a song or video over
Play the previous song, video,
or chapter in an audiobook
or podcast
Fast-forward or rewind a song
Add a song to the On-The-Go
playlist
Find the iPod serial number.
Press any button.
Press and hold Play/Pause
Press any button or use the Click Wheel.
Slide the Hold switch to HOLD (an orange bar appears).
Slide the Hold switch to HOLD and back again. Press the Menu and
Center buttons at the same time for about 6 seconds, until the
Apple logo appears.
Scroll to the item and press the Center button.
Press Menu.
Press and hold Menu.
From the main menu, choose Music.
From the main menu, choose Videos.
Select the song or video and press the Center or Play/Pause
button. iPod has to be ejected from your computer to play songs and
videos.
Press Play/Pause
From the Now Playing screen, use the Click Wheel.
Select the list title (an album title or the title of a playlist, for
example) and press Play/Pause
From the main menu, choose Shuffle Songs.
From the Now Playing screen, press the Center button to show the
scrubber bar, and then scroll to any point in the song or video.
Press the Center button to resume playing from that point.
Press Next/Fast-forward (‘).
Press Previous/Rewind (]).
Press Previous/Rewind (]) twice.
Press and hold Next/Fast-forward (‘) or Previous/Rewind (]).
Select a song in a playlist, and then press and hold the Center
button until the song title flashes.
From the main menu, choose Settings > About, or look on the back
of iPod.
or unplug your headphones.
(’)
(’)
.
(’)
(’)
.
6 Chapter 1
iPod Basics
Scrolling Quickly Through Long Lists
If you have more than 100 songs, videos, or other items, you can scroll quickly through
a long list by moving your thumb quickly on the Click Wheel.
Note:
Not all languages are supported.
To scroll quickly:
1
Move your thumb quickly on the Click Wheel, to display a letter of the alphabet on the
screen.
2
Use the Click Wheel to navigate the alphabet until you find the first letter of the item
you're looking for.
This takes you to the first item in the list beginning with that letter. Items beginning
with a symbol or number appear before the letter “A.”
3
Lift your thumb momentarily (or stop moving your thumb for about one second) to
return to normal scrolling.
4
Use the Click Wheel to finish navigating to the item you want.
Searching Music
You can search iPod for songs, playlists, album titles, artist names, audio podcasts, and
audiobooks. The search feature does not search videos, notes, calendar items, contacts,
or lyrics.
Note:
Not all languages are supported.
To search iPod:
1
From the Music menu, choose Search.
2
Enter a search string by using the Click Wheel to navigate the alphabet and pressing
the Center button to “enter” each character.
iPod starts searching as soon as you enter the first character, displaying the results on
the search screen. For example, if you enter “b,” then iPod displays all music items
containing the letter “b.” If you enter “ab,” iPod displays all items containing that
sequence of letters.
To enter a space, press the Next/Fast-forward button.
To delete the previous character, click the back arrow or press the Previous/Rewind
button.
3
Click DONE to display the found list, which you can now navigate.
Songs in the found list appear without an icon. Other items are preceded by an icon to
show the type of item: artist ( ), album ( ), audiobook ( ), and podcast ( ).
To return to Search, press the Menu button.
Chapter 1
iPod Basics
7
Turning off the Click Wheel Sound
When you scroll through menu items, you can hear a clicking sound through the iPod
internal speaker to let you know the Click Wheel is working. If you like, you can turn the
Click Wheel sound off.
To turn off the Click Wheel sound:
m
Choose Settings and set Clicker to Off.
To turn the Click Wheel sound back on, set Clicker to On.
Disabling iPod Controls
If you don’t want to turn iPod on or activate controls accidentally, you can make them
inactive using the Hold switch.
m
Slide the Hold switch to HOLD (so you can see the orange bar).
8 Chapter 1
iPod Basics
Using iPod Menus
When you turn on iPod, you see the main menu. Choose menu items to perform
functions and go to other menus. Icons along the top of the screen show iPod status.
Menu titleLock icon
Play status
Menu items
Battery status
Display item Function
Play status
Lock icon
Menu title Displays the title of the current menu.
Battery status The Battery icon shows the approximate remaining battery charge.
Menu items Use the Click Wheel to scroll through menu items. Press the Center
The Play (“) icon appears when a song is playing. The Pause (1)
icon appears when a song is paused.
The Lock icon appears when the Hold switch (on top of iPod) is set
to HOLD. This indicates that the iPod controls are disabled.
If the battery is charging, the icon is animated.
button to choose an item. An arrow next to a menu item indicates
that choosing it leads to another menu.
Adding or Removing Items From the Main Menu
You might want to add often-used items to the iPod main menu. For example, you can
add a “Songs” item to the main menu, so you don’t have to choose Music before you
choose Songs.
To add or remove items from the main menu:
1
Choose Settings > Main Menu.
2
For each item you want to appear in the main menu, turn the Off option to On.
Chapter 1
iPod Basics
9
Setting the Backlight Timer
You can set the backlight to turn on and illuminate the screen for a certain amount of
time when you press a button or use the Click Wheel. The default is 10 seconds.
m Choose Settings > Backlight Timer, and then choose the time you want.
Even if you don’t set the backlight timer, you can turn on the backlight at any time
by pressing any button or using the Click Wheel. After a few seconds, the backlight
turns off.
Setting the Screen Brightness
You can adjust the brightness of your iPod screen by moving a slider.
m Choose Settings > Brightness, and then use the Click Wheel to move the slider. Moving
it to the left dims the screen; moving it to the right increases the screen brightness.
You can also set the brightness during a slideshow or video by pressing the Center
button to bring up and dismiss the brightness slider.
Setting the Language
iPod can be set to use different languages.
m Choose Settings > Language, and then choose a language from the list.
Connecting and Disconnecting iPod
You connect iPod to your computer to load music, videos, photos, and files, and to
charge the battery. Disconnect iPod when you’re done.
Connecting iPod
To connect iPod to your computer:
m Plug the included iPod Dock Connector to USB 2.0 Cable into a high-power USB port
on your computer (a USB 2.0 port is recommended), and then connect the other end
to iPod.
If you have an iPod Dock, you can connect the cable to a high-power USB port on your
computer, connect the other end to the Dock, and then put iPod in the Dock.
10 Chapter 1 iPod Basics
Note: The USB port on your keyboard doesn’t provide enough power. You must
connect iPod to a USB port on your computer.
By default, iTunes syncs songs on iPod automatically when you connect it to your
computer. When iTunes is finished, you can disconnect iPod.
If you connect iPod to a different computer and it is set to sync music automatically,
iTunes prompts you before loading any music. If you click Yes, the songs and other
audio files already on iPod will be erased and replaced with the songs and other audio
files on the computer iPod is connected to. For more information about loading music
to iPod and using iPod with more than one computer, see Chapter 2, “Music Features,”
on page 16.
Note: You can load songs while your battery is charging.
Chapter 1 iPod Basics 11
Disconnecting iPod
It’s important not to disconnect iPod from your computer while music is being loaded.
You can easily see if it’s OK to disconnect iPod by looking at the iPod screen.
Important: Don’t disconnect iPod if you see the “Do not disconnect” message. You
could damage files on iPod. If you see this message, you must eject iPod before
disconnecting it.
If you see the main menu or a large
battery icon, you can disconnect iPod.
Important: If you see this message, you
must eject iPod before disconnecting it.
If you set iPod to update songs manually (see “Managing iPod Manually” on page 22)
or enable iPod for disk use (see “Using iPod as an External Disk” on page 45), you must
always eject iPod before disconnecting it.
12 Chapter 1 iPod Basics
To eject iPod:
m Click the Eject button (C) next to iPod in the list of devices in the iTunes Source pane.
If you’re using a Mac, you can eject iPod by dragging the iPod icon on the desktop to
the Trash.
If you’re using a Windows PC, you can eject iPod by clicking the Safely Remove Hardware
icon in the Windows system tray and selecting iPod.
To disconnect iPod:
m Squeeze both sides of the Dock connector and disconnect the cable from iPod. If iPod
is in the Dock, simply remove it.
About the iPod Battery
iPod has an internal, non-user-replaceable battery. For best results, the first time you
use iPod, let it charge for about four hours or until the battery icon in the top-right
corner of the iPod display shows that the battery is fully charged. If iPod isn’t used for a
while, the battery might need to be charged.
The iPod battery is 80-percent charged in about two hours and fully charged in about
four hours. If you charge iPod while loading files, playing music, viewing videos, or
viewing a slideshow, it might take longer.
Chapter 1 iPod Basics 13
Charging the iPod Battery
You can charge the iPod battery in two ways:
 Connect iPod to your computer.
 Use the iPod USB Power Adapter, available separately.
To charge the battery using your computer:
m Connect iPod to a high-power USB port on your computer. The computer must be
turned on and not in sleep mode (some models of Macintosh can charge iPod while in
sleep mode).
If the battery icon on the iPod screen shows a lightning bolt, the battery is charging. If
it shows a plug, the battery is fully charged.
If you don’t see the lightning bolt or the plug, iPod might not be connected to a
high-power USB port. Try another USB port on your computer.
Important: If iPod is very low on power, it might need to charge for up to 30 minutes
before the display turns on.
If you want to charge iPod when you’re away from your computer, you can purchase
the iPod USB Power Adapter.
To charge the battery using the iPod USB Power Adapter:
1 Connect the AC plug adapter to the power adapter (they might already be connected).
2 Connect the iPod Dock Connector to USB 2.0 Cable to the power adapter, and plug the
other end of the cable into iPod.
14 Chapter 1 iPod Basics
3 Plug the power adapter into a working electrical outlet.
AC plug adapter
(The plug on your Power Adapter may look different.)
iPod Dock Connector to USB 2.0 Cable
iPod USB Power Adapter
WARNING: Make sure the power adapter is fully assembled before plugging it into an
electrical outlet.
Note: If you have an optional iPod Dock Connector to FireWire cable, you can also
connect iPod to a FireWire port on your computer or to an iPod Power Adapter (with a
FireWire port) that’s plugged into an electrical outlet. You can only use FireWire only for
charging the battery and not for loading songs and other files onto iPod.
Understanding Battery States
When iPod is not connected to a power source, a battery icon in the top-right corner of
the iPod screen shows approximately how much charge is left.
Battery less than 20% charged
Battery about halfway charged
Battery fully charged
If iPod is connected to a power source, the battery icon changes to show that the
battery is charging or fully charged.
Battery charging (lightning bolt)
Battery fully charged (plug)
You can disconnect and use iPod before it is fully charged.
Note: Rechargeable batteries have a limited number of charge cycles and might
eventually need to be replaced. Battery life and number of charge cycles vary by use
and settings. For more information, go to www.apple.com/batteries.
Chapter 1 iPod Basics 15
2 Music Features
2
With iPod, you can take your music and audio collection with
you wherever you go. Read this section to learn about
loading music and listening to iPod.
You use iPod by importing songs, audiobooks, videos, and podcasts (radio-style audio
shows) into your computer and then loading them onto iPod. Read on to learn more
about the steps in this process, including:
 Getting music from your CD collection, hard disk, or the iTunes Store (part of iTunes
and available in some countries only) into the iTunes application on your computer.
 Organizing your music and other audio into playlists, if you want.
 Loading playlists, songs, audiobooks, videos, and podcasts onto iPod.
 Listening to music or other audio on the go.
16
About iTunes
iTunes is the software application you use with iPod. iTunes can sync music,
audiobooks, podcasts, and more with iPod. When you connect iPod to your computer,
iTunes opens automatically.
This guide explains how to use iTunes to download songs and other audio and video to
your computer, create personal compilations of your favorite songs (called playlists),
load them onto iPod, and adjust iPod settings.
iTunes also has many other features. You can make your own CDs that play in standard
CD players (if your computer has a CD-recordable drive); listen to streaming Internet
radio; watch videos and TV shows; rate songs according to preference; and much more.
For information about using these iTunes features, open iTunes and choose
Help > iTunes Help.
Importing Music into Your Computer
To listen to music on iPod, you first need to get that music into iTunes on your
computer.
There are three ways of getting music and other audio into iTunes:
 Purchase music, audiobooks, and videos, or download podcasts online from the
iTunes Store.
 Import music from audio CDs.
 Add music and other audio that’s already on your computer to the iTunes library.
Purchasing Songs and Downloading Podcasts Using the iTunes Store
If you have an Internet connection, you can easily purchase and download songs,
albums, audiobooks, and videos online using the iTunes Store. You can also subscribe
to and download podcasts, radio-style audio shows.
To purchase music online using the iTunes Store, you set up an Apple account in
iTunes, find the songs you want, and then buy them. If you already have an Apple
account, or if you have an America Online (AOL) account (available in some countries
only), you can use that account to sign in to the iTunes Store and buy songs.
Note: You don’t need an iTunes Store account to download or subscribe to podcasts.
To sign in to the iTunes Store:
m Open iTunes and then:
 If you already have an iTunes account, choose Store > Sign In.
 If you don’t already have an iTunes account, choose Store > Create Account and follow
the onscreen instructions to set up an Apple account or enter your existing Apple
account or AOL account information.
Chapter 2 Music Features 17
To find songs, audiobooks, videos, and podcasts:
You can browse or search the iTunes Store to find the album, song, or artist you’re
looking for. Open iTunes and click iTunes Store in the Source pane.
 To browse the iTunes Store, choose a music genre from the Choose Genre
pop-up menu on the top-left side of the store, click one of the albums or songs in
the center or right side of the store, or click the Browse button in the top-right corner
of the window.
 To browse for podcasts, click the Podcasts link on the left side of the main page in the
iTunes Store.
 To browse for videos, click the Videos link on the left side of the main page in the
iTunes Store.
 To search the iTunes Store, type the name of an album, song, artist, or composer in the
search field.
 To narrow your search, type something in the search field, press Return or Enter on
your keyboard, and then press buttons in the Search Bar. For example, to narrow your
search to song names, press the Song button.
 To search for a combination of items, click Power Search in the iTunes Store window.
 To return to the main page of the iTunes Store, click the Home button at the top-left
corner of the store.
To buy a song, album, audiobook, or video:
1 Click iTunes Store in the Source pane, and then find the item you want to buy.
You can double-click a song or other item to listen to a portion of it and make sure it’s
what you want. (If your network connection is slower than 128 kbps, choose iTunes >
Preferences, and in the Store pane, select the “Load complete preview before playing”
checkbox.)
2 Click Buy Song, Buy Album, Buy Book, or Buy Video.
The song or other item is downloaded to your computer and charged to the credit card
listed on your Apple or AOL account.
To download or subscribe to a podcast:
1 Click iTunes Store in the Source pane.
2 Click the Podcasts link on the left side of the main page in the iTunes Store.
3 Browse for the podcast you want to download.
 To download a single podcast episode, click the Get Episode button next to the
episode.
 To subscribe to a podcast, click the Subscribe button next to the podcast graphic.
iTunes downloads the most recent episode. As new episodes become available, they
are automatically downloaded to iTunes when you connect to the Internet.
18 Chapter 2 Music Features
Importing Music From Your Audio CDs Into iTunes
Follow these instructions to get music from your CDs into iTunes.
To import music from an audio CD into iTunes:
1 Insert a CD into your computer and open iTunes.
If you have an Internet connection, iTunes gets the names of the songs on the CD from
the Internet (if available) and lists them in the window.
If you don’t have an Internet connection, you can import your CDs and, later, when you’re
connected to the Internet, choose Advanced > Get CD Track Names. iTunes will bring in
the track names for the imported CDs.
If the CD track names aren’t available online, you can enter the names of the songs
manually. For more information, see “Entering Song Names and Other Details” on
page 19.
With song information entered, you can browse for songs in iTunes or on iPod by title,
artist, album, and more.
2 Click to remove the checkmark next to any song you don’t want to import from
the CD.
3 Click the Import CD button. The display area at the top of the iTunes window shows
how much time it will take to import each song.
By default, iTunes plays songs as they are imported. If you’re importing a lot of songs,
you might want to stop the songs from playing to improve performance.
4 To eject the CD, click the Eject (C) button.
5 Repeat these steps for any other CDs with songs you want to import.
Entering Song Names and Other Details
To enter CD song names and other information manually:
1 Select the first song on the CD and choose File > Get Info.
2 Click Info.
3 Enter the song information.
4 Click Next to enter information for the next song.
Adding Lyrics
You can type or paste song lyrics in plain text format into iTunes so that you can view
the song lyrics on iPod while the song is playing.
To type or paste lyrics into iTunes:
1 Select a song and choose File > Get Info.
2 Click Lyrics.
Chapter 2 Music Features 19
3 Enter song lyrics in the text box.
4 Click OK.
For more information, see “Viewing Lyrics on iPod” on page 29.
Adding Songs Already on Your Computer to the iTunes Library
If you have songs on your computer encoded in file formats that iTunes supports, you
can easily add the songs to iTunes.
To add songs on your computer to the iTunes library:
m Drag the folder or disk containing the audio files to Library in the iTunes Source pane
(or choose File > Add to Library and select the folder or disk). If iTunes supports the
song file format, the songs are automatically added to the iTunes library.
You can also drag individual song files to iTunes.
Note: Using iTunes for Windows, you can convert nonprotected WMA files to AAC or
MP3 format. This can be useful if you have a library of music encoded in WMA format.
For more information, open iTunes and choose Help > iTunes Help.
Organizing Your Music
Using iTunes, you can organize songs and other items into lists, called playlists. You can
organize them in any way you want. For example, you can make playlists with songs to
listen to while exercising, or playlists with songs for a particular mood.
You can also make Smart Playlists that update automatically based on rules you define.
When you add songs to iTunes that fit the rules, they automatically get added to the
Smart Playlist.
You can make as many playlists as you like using any of the songs in your computer’s
music library. Putting a song in a playlist doesn’t remove it from the library.
To make a playlist in iTunes:
1 Click the Add (+) button.
2 Type a name for the playlist.
3 Click Music in the Library list, and then drag a song or other item to the playlist.
To select multiple songs, hold down the Shift key or the Command (x) key on a Mac,
or the Shift key or the Control key on a Windows PC, as you click each song.
To make a Smart Playlist:
m Choose File > New Smart Playlist and defines the rules for your playlist.
Note: You can also make playlists on iPod, called On-The-Go Playlists, when iPod isn’t
connected to your computer. See “Making On-The-Go Playlists on iPod” on page 25.
20 Chapter 2 Music Features
Loading Music and Podcasts onto iPod
After your music is imported and organized in iTunes, you can easily load it onto iPod.
To set how music is loaded from your computer onto iPod, you connect iPod to your
computer, and then use iTunes preferences to choose iPod settings.
You can set iTunes to load music onto iPod in three ways:
 Sync all songs and playlists: When you connect iPod, it is automatically updated to
match the songs and other items in the iTunes library. Any other songs on iPod are
deleted.
 Sync selected playlists: When you connect iPod, it is automatically updated to match
the songs in playlists you select in iTunes.
 Manually music on iPod: When you connect iPod, you can drag songs and playlists
individually to iPod, and delete songs and playlists individually from iPod. Using this
option, you can load songs from more than one computer without erasing songs
from iPod. When you manage music yourself, you must always eject iPod from iTunes
before you can disconnect it.
Syncing Music Automatically
By default, iPod is set to sync all songs and playlists when you connect it to your
computer. This is the simplest way to load music onto iPod. You just connect iPod to
your computer, let it add songs, audiobooks, videos, and other items automatically, and
then disconnect it and go. If you added any songs to iTunes since the last time you
connected iPod, they are loaded onto iPod. If you deleted songs from iTunes, they are
deleted from iPod.
To load music onto iPod:
m Simply connect iPod to your computer. If iPod is set to sync automatically, the update
begins.
Important: The first time you connect iPod to a computer, a message asks if you want
to sync songs automatically. If you accept, all songs, audiobooks, and videos are erased
from iPod and replaced with the songs and other items from that computer. If you
don’t accept, you can still load songs onto iPod manually without erasing any of the
songs already on iPod.
Chapter 2 Music Features 21
While music is being loaded from your computer onto iPod, the iTunes status window
shows progress, and the iPod icon in the Source pane flashes red.
When the update is done, a message in iTunes says “iPod update is complete.”
If you set iTunes to manage music manually, you can reset it later to sync automatically.
To reset iTunes to sync all music automatically on iPod:
1 In iTunes, select iPod in the Source pane and click the Music tab.
2 Select “Sync music” and then choose “All songs and playlists.”
3 Click Apply.
The update begins automatically.
Note: If “Only sync checked items” is selected in the Summary pane, iTunes syncs only
items that are checked in your Music and other libraries.
Syncing Music From Selected Playlists onto iPod
Setting iTunes to sync selected playlists to iPod is useful if the music in your iTunes
library doesn’t all fit on iPod. Only the music in the playlists you select is synced to iPod.
To set iTunes to sync music from selected playlists onto iPod:
1 In iTunes, select iPod in the Source pane and click the Music tab.
2 Select “Sync music” and then choose “Selected playlists.”
3 Select the playlists you want.
4 To include music videos and display album artwork, select those options.
5 Click Apply.
Note: If “Only sync checked items” is selected in the Summary pane, iTunes syncs only
items that are checked in your Music and other libraries.
Managing iPod Manually
Setting iTunes to let you manage iPod manually gives you the most flexibility for
managing music and video on iPod. You can add and remove individual songs
(including music videos) and videos (movies and TV shows). Also, you can load music
and videos from multiple computers to iPod without erasing items already on iPod.
Note: Setting iPod to manually manage music and video turns off the automatic sync
options in the Music, Movies, and TV Shows panes. You cannot manually manage one
and automatically sync another at the same time.
To set iTunes to let you manage music and video on iPod manually:
1 In iTunes, select iPod in the Source pane and click the Summary tab.
2 In the Options section, select “Manually manage music and video.”
3 Click Apply.
22 Chapter 2 Music Features
Loading...