A.O. Smith FCG-75, FCG-100 User Manual

0 (0)
A.O. Smith FCG-75, FCG-100 User Manual

COMMERCIAL-GRADE

RESIDENTIAL GAS WATER HEATERS

PROLINE® HIGH RECOVERY

ATMOSPHERIC VENT 75 & 100 GALLON

COMMERCIAL-GRADE RESIDENTIAL

HIGHEST RECOVERIES

Capacity/ input combinations up to 98 gallons/75,100 BTU’s produce recoveries up to 81 gallons per hour

FULLY AUTOMATIC CONTROLS WITH SAFETY SHUTOFF

Accurate, dependable control system requires no electric connections. Fixed automatic gas shutoff device for added safety.

GREEN CHOICE® GAS BURNER

Patented eco-friendly burner design reduces NOx emissions by up to 33% and complies with LowNOx emission requirements of 40 ng/J.

DYNACLEAN™ DIFFUSER DIP TUBE

Reduces lime and sediment buildup and maximizes hot water output. Made from long-lasting PEX cross-linked polymer.

COREGARDANODE ROD

Our anode rods have a stainless steel core that extends the life of the anode rod allowing superior tank protection far longer than standard anode rods.

PUSH-BUTTON PIEZO IGNITOR

Makes lighting the pilot fast and easy with one-hand push-button spark ignition (Natural gas only).

NIPPLES

• Factory-installed for faster installation.

BLUE DIAMOND® GLASS COATING

Provides superior corrosion resistance compared to industry standard glass lining.

ENHANCED-FLOW BRASS DRAIN VALVE

Our residential water heaters have a solid brass, tamper resistant, enhancedflow,ball type, drain valve.

Uses a standard female hose fitting that allows for fast and easy draining during maintenance.

Designed for easy operation, this valve includes an integral screwdriver slot that features a 1/4 turn (open/close) radius, which not only permits full straight-through water flow but also a quick and positive shut off

CODE COMPLIANCE

Meets UBC, CEC and ICC National Codes.

Meets the thermal efficiency and standby loss requirements of the

U.S. Department of Energy and current edition of ASHRAE/IES 90.1.

CSA CERTIFIED AND ASME RATED T&P RELIEF VALVE

MAXIMUM HYDROSTATIC WORKING

PRESSURE 150 PSI

DESIGN-LISTED BY CSA INTERNATIONAL

Certified at 300 psi test pressure and 150 psi working pressure.

Listed according to ANSI Z21.10.3 CSA 4.3 standards governing storage tanktype gas water heaters.

6-YEAR LIMITED TANK AND PARTS WARRANTY

For complete information, consult written warranty or go to hotwater.com

© January 2017 A. O. Smith Corporation. All rights reserved.

 

Page 1 of 2

 

www.hotwater.com | 800-527-1953 Toll-Free USA | A. O. Smith Corporation | 500 Tennessee Waltz Parkway | Ashland City, TN 37015

 

AOSRG47002

Loading...
+ 1 hidden pages