PROLINE® MASTER ULTRA-LOW NOx
COMMERCIAL-GRADE RESIDENTIAL
COMMERCIAL-GRADE
RESIDENTIAL GAS WATER HEATERS
INTELLIGENT CONTROL LOGIC
• The internal microprocessor provides
enhanced operating parameters and tighter
differentials for precise sensing and faster
heating response to optimize performance.
• Uses a thermopile to generate the power
needed to operate the electronic gas control
without requiring an external power source
• The electronic gas control incorporates an
LED status indicator that monitors system
operation & service diagnostics.
HIGH UNIFORM ENERGY FACTOR (UEF)
• Eco-friendly non-CFC foam insulation, heat
traps and specially designed combustion
chamber combine to produce a high UEF for
maximum savings on operating costs.
GREEN CHOICE® GAS BURNER
• Enhanced Ultra-low NOx burner complies
with SCAQMD Rule 1121 and other air
quality management districts with similar
requirements for NOx emissions of less than
10 ng/J.
DYNACLEAN™ DIFFUSER DIP TUBE
• Helps reduce lime and sediment buildup and
maximizes hot water output. Made from
long-lasting PEX cross-linked polymer.
COREGARD™ ANODE ROD
• Our anode rods have a stainless steel core
that extends the life of the anode rod
allowing superior tank protection far longer
than standard anode rods.
• ProLine® Master products have increased
anode protection with either longer, or
multiple anodes depending on model.
PUSH-BUTTON PIEZO IGNITOR
• Makes lighting the pilot fast and easy with
one-hand push-button spark ignition.
HEAT TRAP NIPPLES
• Factory-installed for faster installation
BLUE DIAMOND® GLASS COATING
• Provides superior corrosion resistance
compared to industry standard glass lining.
• Blue Diamond® Glass coating blend is
formulated in the same lab that creates
the protection for our industry-leading
commercial product line.
ENHANCED-FLOW BRASS DRAIN
VALVE
• Our residential water heaters have a solid
brass, tamper resistant, enhanced-flow, ball
type, drain valve.
• Uses a standard female hose fitting that
allows for fast and easy draining during
maintenance.
• Designed for easy operation, this valve
includes an integral screwdriver slot that
features a ¼ turn (open/close) radius, which
not only permits full straight-through water
flow but also a quick and positive shut off.
CODE COMPLIANCE
• Meets UBC, CEC and HUD National Codes.
• Meets the thermal efficiency and standby
loss requirements of the U.S. Department of
Energy and current edition of ASHRAE/IES
90.1.
• Complies with the Federal Energy
Conservation Standards effective April 16,
2015, in accordance with the Energy Policy
Conservation Act (EPCA), as amended.
CSA CERTIFIED AND ASME RATED T&P
RELIEF VALVE
• Top-mounted T&P relief valve available as
option.
DESIGN-CERTIFIED BY CSA
INTERNATIONAL
• Certified at 300 psi test pressure and 150
psi working pressure. Listed according to
ANSI Z21.10.1-CSA 4.1 standards governing
storage tank-type gas water heaters.
8-YEAR LIMITED TANK AND PARTS
WARRANTY
© May 2017 A. O. Smith Corporation. All rights reserved.
www.hotwater.com | 800-527-1953 Toll-Free USA | A. O. Smith Corporation | 500 Tennessee Waltz Parkway | Ashland City, TN 37015
Page 1 of 2
AOSRG47105