Acer PE-W42, V12S, EV-X62, X113, V12X User Manual

...

0 (0)

Acer Projector

P1183/M403/PE-S42/X1183A/D603P/

EV-S62T/X114/X1183/D603/EV-S62/

X113/D600/EV- S60/V10S/AS201/

X113H/X113PH/D600D/EV-S60H/

V12S/AS211/P1283/M413/PE-X42/

V12X/AX316/P1283n/M413T/

PE-X42G/X1283/X1280/D613/

EV-X62/P1383W/X1383WH/M423/

PE-W42/V12W/AW316/P1380W/

X1380WH/M420/PE-W40/V11W/

AW216/H5380BD/E230/HE-720/

P1510/P1515/M450/PE-840/

H6520BD/E240D/HE-804J Series

User's Guide

Downloaded from ProjectorsManual.com Manuals

Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications. This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims the implied warranties of merchantability or fitness for a particular purpose.

Record the model number, serial number, purchase date and place of purchase information in the space provided below. The serial number and model number are recorded on the label affixed to your projector. All correspondence concerning your unit should include the serial number, model number and purchase information.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronically, mechanically, by photocopy, recording or otherwise, without the prior written permission of Acer Incorporated.

Model number: _________________________________

Serial number: __________________________________

Date of purchase: _______________________________

Place of purchase: ______________________________

Acer Projector User's Guide Original Issue: 03/2014

Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product names or trademarks are used herein for identification purposes only and belong to their respective companies.

"HDMI™, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC."

Downloaded from ProjectorsManual.com Manuals

iii

Information for your safety and comfort

Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product.

Turning the product off before cleaning

Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

Caution for plug as disconnecting device

Observe the following guidelines when connecting and disconnecting power to the external power supply unit:

• Install the power supply unit before connecting the power cord to the AC

power outlet.

• Unplug the power cord before removing the power supply unit from the

projector.

• If the system has multiple sources of power, disconnect power from the

system by unplugging all power cords from the power supplies.

Caution for Accessibility

Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to disconnect power to the equipment, be sure to unplug the power cord from the electrical outlet.

Warnings!

• Do not use this product near water.

• Do not place this product on an unstable cart, stand or table. If the product

falls, it could be seriously damaged.

• Slots and openings are provided for ventilation to ensure reliable

operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface.

This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided.

• Never push objects of any kind into this product through cabinet slots as

they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onto or into the product.

Downloaded from ProjectorsManual.com Manuals

• To avoid damage of internal components and to prevent battery leakage,

do not place the product on a vibrating surface.

• Never use it under sporting, exercising, or any vibrating environment

which will probably cause unexpected short current or damage rotor devices, lamp.

Using electrical power

• This product should be operated from the type of power indicated on the

marking label. If you are not sure of the type of power available, consult your dealer or local power company.

• Do not allow anything to rest on the power cord. Do not locate this

product where people will walk on the cord.

• If an extension cord is used with this product, make sure that the total

ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating.

• Do not overload a power outlet, strip or receptacle by plugging in too

many devices. The overall system load must not exceed 80% of the branch circuit rating. If power strips are used, the load should not exceed 80% of the power strip's input rating.

• This product's AC adapter is equipped with a three-wire grounded plug.

The plug only fits in a grounded power outlet. Make sure the power outlet is properly grounded before inserting the AC adapter plug. Do not insert the plug into a non-grounded power outlet. Contact your electrician for details.

Warning! The grounding pin is a safety feature. Using a power outlet that is not properly grounded may result in electric shock and/or injury.

Note: The grounding pin also provides good protection from unexpected noise produced by other nearby electrical devices that may interfere with the performance of this product.

• Use the product only with the supplied power supply cord set. If you need

to replace the power cord set, make sure that the new power cord meets the following requirements: detachable type, UL listed/CSA certified, VDE approved or its equivalent, 4.5 meters (15 feet) maximum length.

Downloaded from ProjectorsManual.com Manuals

Product servicing

Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel.

Unplug this product from the wall outlet and refer servicing to qualified service personnel when:

• the power cord or plug is damaged, cut or frayed

• liquid was spilled into the product

• the product was exposed to rain or water

• the product has been dropped or the case has been damaged

• the product exhibits a distinct change in performance, indicating a need

for service

• the product does not operate normally after following the operating

instructions

Note: Adjust only those controls that are covered by the operating instructions, since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition.

Warning! For safety reasons, do not use non-compliant parts when adding or changing components. Consult your reseller for purchase options.

Your device and its enhancements may contain small parts. Keep them out of the reach of small children.

Additional safety information

• Do not look into the projector's lens when the lamp is on. The bright may

hurt your eyes.

• Turn on the projector first and then signal sources

• Do not place the product in following environments:

• Space that is poorly ventilated or confined. At least 50cm clearance from walls and free flow of air around the projector is necessary.

• Locations where temperatures may become excessively high, such as inside of a car with all windows rolled up.

• Locations where excessive humidity, dust, or cigarette smoke may contaminate optical components, shortening the life span and darkening the image.

• Locations near fire alarms.

• Locations with an ambient temperature above 40 ºC/104 ºF.

• Locations where the altitudes are higher than 10000 feet.

• Unplug immediately if there is something wrong with your projector. Do

not operate if smoke, strange noise or odor comes out of your projector. It

Downloaded from ProjectorsManual.com Manuals

might cause fire or electric shock. In this case, unplug immediately and contact your dealer.

• Do not keep using this product to break or drop it. In this case contact your

dealer for inspection.

• Do not face the projector lens to the sun. It can lead to fire.

• When switching the projector off, suggest to ensure the projector

completes its cooling cycle before disconnecting power.

• Do not frequently turn off the main power abruptly or unplug the

projector during operation. The best way is to wait for the fan to turn off before turning main power off.

• Do not touch air outlet grille and bottom plate which becomes hot.

• Clean the air filter frequently if have. The temperature inside may rise and

cause damage when the filter/ventilation slots clogged with dirt or dust.

• Do not look into the air outlet grille when projector is operating. It may

hurt your eyes.

• Always open the lens shutter or remove the lens cap when the projector is

on.

• Do not block the projector lens with any object when the projector is

under operation as this could cause the object to become heated and deformed or even cause a fire. To temporarily turn off the lamp, press HIDE on the remote control.

• The lamp becomes extremely hot during operation. Allow the projector to

cool for approximately 45 minutes prior to removing the lamp assembly for replacement.

• Do not operate lamps beyond the rated lamp life. It could cause it to break

on rare occasions.

• Never replace the lamp assembly or any electronic components unless the

projector is unplugged.

• The product will detect the life of the lamp itself. Please be sure to change

the lamp when is showing warning message.

• When changing the lamp, please allow unit to cool down, and follow all

changing instructions.

• Reset the "Lamp Hour Reset" function from the Onscreen display

"Management" menu after replacing the lamp module.

• Do not attempt to disassemble this projector. There are dangerous high

voltages inside which may hurt you. The only user serviceable part is the lamp which has its own removable cover. Refer servicing only to suitable qualified professional service personnel.

• Do not stand the projector on end vertically. It may cause the projector to

fall over, causing injury or damage.

• This product is capable of displaying inverted images for ceiling mount

installation. Only use acer ceiling mount kit for mounting the projector and ensure it is securely installed.

Downloaded from ProjectorsManual.com Manuals

vii

Caution for Listening

To protect your hearing, follow these instructions.

• Increase the volume gradually until you can hear clearly and comfortably.

• Do not increase the volume level after your ears have adjusted.

• Do not listen to music at high volumes for extended periods.

• Do not increase the volume to block out noisy surroundings.

• Decrease the volume if you can't hear people speaking near you.

Disposal instructions

Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit http://www.acer-group.com/public/Sustainability/sustainability01.htm

Mercury advisory

For projectors or electronic products containing an LCD/CRT monitor or display:

Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local, state or federal laws. For more information, contact the Electronic Industries Alliance at www.eiae.org. For lamp-specific disposal information, check www.lamprecycle.org

“Lamp(s) contain Mercury, Dispose Properly.”

Downloaded from ProjectorsManual.com Manuals

viii

First things first

Usage Notes

Do:

• Turn off the product before cleaning.

• Use a soft cloth moistened with mild detergent to clean the display

housing.

• Disconnect the power plug from AC outlet if the product is not being used

for a long period of time.

Don't:

• Block the slots and openings on the unit provided for ventilation.

• Use abrasive cleaners, waxes or solvents to clean the unit.

• Use under the following conditions:

• In extremely hot, cold or humid environments.

• In areas susceptible to excessive dust and dirt.

• Near any appliance that generates a strong magnetic field.

• Place In direct sunlight.

Precautions

Follow all warnings, precautions and maintenance as recommended in this user's guide to maximize the life of your unit.

Warning:

• Do not look into the projector's lens when the lamp is on. The bright light may hurt

your eyes.

• To reduce the risk of fire or electric shock, do not expose this product to rain or

moisture.

• Please do not open or disassemble the product as this may cause electric shock.

• When changing the lamp, please allow unit to cool down, and follow all changing

instructions.

• This product will detect the life of the lamp itself. Please be sure to change the lamp

when it shows warning messages.

• Reset the "Lamp Hour Reset" function from the Onscreen display "Management"

menu after replacing the lamp module.

• When switching the projector off, please ensure the projector completes its cooling

cycle before disconnecting power.

• Turn on the projector first and then the signal sources.

• Do not use lens cap when projector is in operation.

• When the lamp reaches the end of its life, it will burn out and may make a loud

popping sound. If this happens, the projector will not turn back on until the lamp module has been replaced. To replace the lamp, follow the procedures listed under "Replacing the Lamp".

Downloaded from ProjectorsManual.com Manuals

Information for your safety and comfort iii

First things first viii

Usage Notes viii

Precautions viii

Introduction 1

Product Features 1

Package Overview 2

Projector Overview 3

Projector Outlook 3

Control Panel 4

Remote Control Layout 5

MHL (Mobile High-Definition Link) Control 7

Getting Started 8

Connecting the Projector 8

Turning the Projector On/Off 10

Turning on the Projector 10

Turning the projector off 11

Adjusting the Projected Image 12

Adjusting the Height of Projected Image 12

How to optimize image size and distance 13

How to get a preferred image size by adjusting distance and zoom 17

User Controls 21

Installation menu 21

Onscreen Display (OSD) Menus 23

Color 24

Image 26

Setting 28

Management 31

Audio 32

3D 33

Language 33

Acer LAN webpage management 34

Contents

Downloaded from ProjectorsManual.com Manuals

How to login in 34

Home 35

Control Panel 35

Network Setting 36

Alert Setting 36

Logout 37

Appendices 38

Troubleshooting 38

LED & Alarm Definition Listing 42

Cleaning and replacing the dust filters 43

Replacing the Lamp 44

Ceiling Mount Installation 45

Specifications 48

Compatibility modes 52

Regulations and safety notices 57

Downloaded from ProjectorsManual.com Manuals

English

Introduction

Product Features

This product is a single-chip DLP® projector. Outstanding features include:

• DLP

technology

• P1183/M403/PE-S42/X1183A/D603P/EV-S62T/X114/X1183/D603/EV-S62/

X113/D600/EV-S60/V10S/AS201/X113H/X113PH/D600D/EV-S60H/V12S/AS211 series: Native 800 x 600 SVGA resolution P1283/M413/PE-X42/V12X/AX316/P1283n/M413T/PE-X42G/X1283/X1280/ D613/EV-X62 series: Native 1024 x 768 XGA resolution P1383W/X1383WH/M423/PE-W42/V12W/AW316/P1380W/X1380WH/M420/ PE-W40/V11W/AW216 series: Native 1280 x 800 WXGA resolution H5380BD/E230/HE-720 series: 1280x720 720p resolution P1510/P1515/M450/PE-840/H6520BD/E240D/HE-804J series: 1920x1080 1080p resolution Full/4:3/16:9/L.Box aspect ratio supported

• Enables projecting 3D content via DLP Link Technology (Nvidia 3DTV Play

Ready only on H6520BD/E240D/HE-804J, H5380BD/E230/HE-720 series)

• Acer ColorBoost technology delivers nature’s true colors for vivid, life-like

images

• High brightness and contrast ratio

• Versatile display modes (Bright, Presentation, Standard, Video, Game,

Education, Movie, Dark Cinema, Sports, User) enable optimum performance in any situation

• NTSC / PAL / SECAM compatible and HDTV (720p, 1080i, 1080p) supported

• Lower power consumption and economy (ECO) mode extends lamp life

• Acer EcoProjeciton Technology delivers Intelligent power management

approach and physical efficiency improvement

• Equipped with HDMI™ & MHL connection supporting HDCP

• Advanced digital keystone correction optimizes presentations

• Smart detection delivers quick, intelligent source detection

• Multi-language onscreen display (OSD) menus

• Manual focus projection lens zooms up to 1.1x

• 2x digital zoom and pan function

• Microsoft

Windows® 2000, XP, Vista®, Windows 7, Windows 8,

Macintosh

OS compliant

Note: Functions vary depending on model definition.

Downloaded from ProjectorsManual.com Manuals

English

Package Overview

This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if any thing is missing.

Projector Power cord VGA cable

2 x Batteries

(option)

Security card User’s guide

Quick start guide Carrying case

(option)

Dust filters

(option)

Remote control

Downloaded from ProjectorsManual.com Manuals

English

Projector Overview

Projector Outlook

Front / upper side

Right / Rear side

# Description # Description

1 Remote control receiver 5 Zoom lever 2 Power button 6 Focus ring 3 Control panel 7 Projection lens 4 Lamp cover 8 Tilt adjusting wheels

3 2

2133

109 1187

5146

Downloaded from ProjectorsManual.com Manuals

English

Note: Functions vary depending on model definition.

Control Panel

# Description # Description

1 Composite video input connector 9 LAN (RJ45 Port for 10/100M Ethernet) 2 S-Video input connector 10 RS232 connector

Monitor loop-through output connector (for VGA IN 2 only)

Mini USB connector

4 PC analog signal/HDTV/component

video input connector (VGA, VGA IN, VGA IN 1, VGA IN 2)

HDMI/MHL connector (HDMI/MHL, HDMI 1/MHL)

5 Security bar 13 Power socket

Audio input connector (for S-Video, Composite)

Kensington

lock port

7 Audio out connector 15 HDMI 2 connector

Audio in connector (for VGA IN 1, VGA IN 2)

Audio input connector ( for S-Video, Composite, VGA)

# Icon Function Description

1 POWER Power Indicator LED

See the contents in "Turning the Projector On/Off" section.

Source Long press to show the source menu.

Change the active source, short press the

button to switch around. 2 LAMP Lamp Indicator LED 3 TEMP Temp Indicator LED

2 3

LAMP

TEMP

SOURCE

SOUR CE

Downloaded from ProjectorsManual.com Manuals

English

Remote Control Layout

# Icon Function Description

1 Infrared

transmitter

Sends signals to the projector.

2 POWER Refer to the "Turning the Projector On/Off" section.

3 3D Press "3D" to select 3D models.

4 SOURCE Changes the active source.

5 MODE Press "MODE" to select the display mode from Bright,

Presentation, Standard, Video, Game, Education and User.

6 HIDE Momentarily turns off the video. Press "HIDE" to hide the

image, press again to display the image.

7 MEDIA_SETUP No function.

8 RATIO To choose the desired aspect ratio.

9 ZOOM Zooms the projector display in or out.

FREEZE

To pause the screen image.

11 MENU

• Press "MENU" to launch the Onscreen display (OSD)

menu, back to the previous step for the OSD menu operation or exit the OSD menu.

• Confirm your selection of items.

12 KEYSTONE Adjusts the image to compensate for distortion caused by

tilting the projector (± 40 degrees).

HIDE

RATIO

SOURCE

MODE

MEDIA

SETUP

ZOOM

FREEZE

HIDE

MEDIA

SETUP

MODE

SOURCE

ZOOM

FREEZE

E-26110

BONTECH ELECTRONICS(K.S) CO ., LTD .

No. 2018, Zhonghuayuan west road, Yushan town,Kunshan city, China

LASER MODULE : M-5.2-6.5x10-5.5x5.5

MC.JG811.008

Model No:E-26171

MC.JG811.009

Downloaded from ProjectorsManual.com Manuals

English

Note: Functions vary depending on model definition.

13 Four

directional select keys

Use up, down, left, right buttons to select items or make adjustments to your selection.

14 Pre./Rewind No function.

Enter/ Play/ Pause

No function.

Back/Stop No function.

Next/Fast forward

No function.

15 KeyPad 0~9 Press "0~9" to input a password in the "Security" OSD.

16 PgUp/PgDn For computer mode only. Use this button to select the next or

previous page. This function is only available when USB Ctrl connector (mini type B) is connected to a computer via a USB cable.

17 COMPONENT No function.

18 VIDEO To change source to COMPOSITE VIDEO.

19 VGA Press "VGA" to change source to the VGA connector. This

connector supports analog RGB, YPbPr (480p/576p/720p/ 1080i), YCbCr (480i/576i) and RGBsync.

20 S-VIDEO To change source to S-Video.

21 SD/USB A No function.

22 USB B For USB control and firmware upgrade.

23 HDMI/DVI To change source to HDMI/MHL. (no DVI function)

24 LAN/WiFi Press "LAN/WiFi" to display the image which is wire or

wirelessly transmitted from the PC to the projector via the "Acer LAN webpage management" utility.

(*)

Laser pointer Aim the remote at the viewing screen.

(*)

Laser button Aim the remote at the viewing screen, press and hold this

button to activate the laser pointer. This function is not supported in Japanese market.

# Icon Function Description

Downloaded from ProjectorsManual.com Manuals

English

MHL (Mobile High-Definition Link) Control

Note: Functions vary depending on model definition.

# Icon Component Description

1MODE

• Press "MODE" button for one second to activate the

MHL Control Mode.

• To exit, press the "MODE" button again.

2 SOURCE Press the "SOURCE" button to toggle between Navigation

or Numeric mode.

3 MENU Press to launch the root memu.

(only for Navigation mode)

4 Direction Keys Use up, down, left, right buttons to select items or make

adjustments to your selection. (only for Navigation mode)

5 Select To select the file. (only for Navigation mode)

6 Exit To exit the file. (only for Navigation mode)

7 PgUp/PgDn Use the button to select the next or previous

page. (only for Navigation mode)

8 KeyPad 0~9 Number buttons. (only for Numeric mode)

HIDE

MEDIA

SETUP

MODE

SOURCE

ZOOM

FREEZE

Downloaded from ProjectorsManual.com Manuals

English

Getting Started

Connecting the Projector

D-Sub

RS232

HDTV adapter

RBG

D-Sub

USB

HDMI

USB

MHL

/ MHL

S-VIDEO

AUDIO IN

AUDIO OUT

VGA OUT

VGA IN 2

VGA IN 1

USB CTRL

RS232

VIDEO

S-Video output

Video output

DVD player, Set-top Box,

HDTV receiever

DVD player

Internet

Downloaded from ProjectorsManual.com Manuals

English

Note: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector. Note: Functions vary depending on model definition. Note: USB cable needs powered extender if the length is over 5 m. Note: VGA OUT loops through for VGA IN 2 only. Note: Some smartphones require a converter (supplied by smartphone maker) to enable the MHL function.

# Description # Description

1 Power cord 8 Audio cable jack/RCA

2 VGA cable 9 RS232 cable

3 Audio cable jack/jack 10 USB cable

4 VGA to component/HDTV adapter 11 HDMI cable

5 3 RCA component cable 12 MHL cable (MicroUSB to HDMI)

6 S-Video cable 13 RJ45 cable

7 Composite video cable

HDTV adapter

RBG

D-Sub

USB

HDMI

S-Video output

Video output

DVD player, Set-

top Box, HDTV

receiever

DVD player

Downloaded from ProjectorsManual.com Manuals

English

Turning the Projector On/Off

Turning on the Projector

1 Ensure that the power cord and signal cable are securely connected. The

Power indicator LED will flash red.

2 Turn on the projector by pressing "Power" button on the control panel or

remote control, and the Power indicator LED will turn blue.

3 Turn on your source (computer, notebook, video player ,etc.). The

projector will detect your source automatically.

• If the screen displays "Lock" and "Source" icons, it means the projector is locked onto a specific source type and there is no such type of input signal detected.

• If the screen displays "No Signal", please make sure the signal cables are securely connected.

• If you connect to multiple sources at the same time, use the "Source" button on the remote control or direct source key on the remote control to switch between inputs.

Power button

Downloaded from ProjectorsManual.com Manuals

English

Turning the projector off

1 To turn the projector off, press and hold the power button. This message

appears: "Please press the power button again to complete the shutdown process." Press the power button again.

2 The LED power indicator will turn RED and blink rapidly after the projector

is turned off, and the fan(s) will continue to operate for about 2 minutes to ensure that the system cools properly. (only supported under "Instant Resume" mode)

3 As long as the power cord remains plugged in, you can press the power

button to turn the projector immediately back on anytime during the 2minute shutdown process. (only supported under "Instant Resume" mode)

4 Once the system has finished cooling, the LED power indicator will stop

blinking and turn solid red to indicate standby mode.

5 It is now safe to unplug the power cord.

Warning indicators:

• "Projector Overheated. Lamp will automatically turn off soon." This onscreen message indicates that the projector has overheated. The lamp with automatically turn off, the projector will automatically shut down, and the LED temp indicator will turn solid red. Contact your local dealer or service center.

• "Fan failed. Lamp will automatically turn off soon." This onscreen message indicates that the fan has failed. The lamp will automatically turn off, the projector will automatically shut down, and the LED temp indicator will blink. Contact your local dealer or service center.

Note: Whenever the projector automatically shuts down and the LED lamp indicator turns solid red, contact your local reseller or service center. Note: Functions vary depending on model definition.

Downloaded from ProjectorsManual.com Manuals

+ 49 hidden pages