USER GUIDE
PLANTRONICS PULSAR™ 260
STEREO BLUETOOTH HEADSET
WELCOME
This user guide provides instructions on the setup and usage of the Plantronics Pulsar™ 260 Bluetooth® Headset. Before getting started, please review the safety booklet included in your package.
For additional help, service or support information, refer to product warranty card or Troubleshooting on page 9, or visit www.plantronics.com.
TABLE OF CONTENTS
Package contents and features |
3 |
Charging |
4 |
Powering |
4 |
Indicator lights |
4 |
Pairing |
5 |
Making/answering/ending calls |
5 |
Wearing options |
6 |
Powered speaker & stereo uses |
6 |
Pod controls |
7 |
Headset controls |
8 |
Troubleshooting |
9 |
System reset |
9 |
Product specifications |
10 |
Technical assistance |
10 |
Regulatory Information |
11 |
Warnings |
12 |
Register your product online
Visit www.plantronics.com/productregistration to register your product online so that we can provide you with the best possible service and technical support.
PACKAGE CONTENTS & FEATURES
Pulsar 260 headset
Microphone with call control button
Sound-isolating earbuds
2.5mm plug
Stereo Bluetooth pod
Mini-USB port
Indicator light
Power on/off/pairing
2.5mm port
Detachable clip
Audio-out cable |
AC charger |
Lanyard |
Pod controls: |
|
|
|
|
Mute/play/pause |
|
|
Volume up |
Power on/off/pairing |
|
Volume down |
|
|
Track forward |
|
|
Track back |
2 | |
| 3 |
CHARGING
You must charge for 3 hours before first use.
To charge, connect AC charger to pod miniUSB socket.
Pod indicator light flashes red when charging and changes to solid blue when fully charged.
POWERING ON/OFF
Press and hold power on/off switch for >2 seconds.
POD INDICATOR LIGHTS
Action |
Light |
Charging |
Flashes red |
Fully charged |
Solid blue |
|
3 red flashes. = |
Power/battery status |
|
|
2 red flashes. = |
|
1 red flash. = |
Pairing/connect |
Flashes red and blue |
Bluetooth pod connected |
Flashes blue |
to headset |
|
NOTE: Flashes red when headset is initially powered on.
PAIRING
To pair pod with phone:
Begin with pod powered on.
1.Press and hold both the mute/play/ pause button and the power on/off/ pairing button simultaneously. When the indicator light flashes red and blue, release buttons.
2.While pod is flashing red and blue, use the phone menu to search for Bluetooth devices and select “260 Plantronics”.
3.When prompted for password, enter
0000.
Pod flashes blue when paired successfully.
For set up and pairing instructions with Bluetooth devices other than mobile phones, please consult your Bluetooth device user guide.
1
2
M2500 Plantronics |
3 |
260Plantronics |
|
M3000 Plantronics |
Enter |
|
password |
|
0000 |
MAKING/ANSWERING/ENDING CALLS
To make a call:
Dial on phone; call transfers automatically to headset.
To answer or end a call:
Briefly press call control button on headset.
To adjust volume:
Short press + or – buttons on pod for incremental change, hold for continuous change.
4 | |
| 5 |