ZTE MF65M Quick Start Manual

1

MF65M

Quick Start Guide

ZTE CORPORATION

NO. 55, Hi-tech Road South, ShenZhen, P.R.China

Postcode: 518057

2

Getting to Know Your Device

Appearance

The following gure is for your reference only.

1. LED Indicators

2. Power Key

3. WPS Key

4. Charging/micro-USB Jack

5. (U)SIM Card Slot

6. microSDHC Card Slot

NOTE:

The microSDHC™ logo is a trademark of SD-3C,

LLC.

3

Getting to Know Your Device

Indicators

When the device is powered on, the following icons may

be lighting. For a description of the icons, refer to the fol-

lowing table.

Indicator Status Description

Network

Red solid

Error status. Not registered to the

mobile network, no (U)SIM card

inserted or no network service

available.

Green

solid

Registered to the mobile net-

work.

Green

blinking

Connected to the mobile network

and data is being transferred.

Wi-Fi

Blue solid Wi-Fi is active.

Blue

blinking

WPS is active.

off

Wi-Fi is off or your device is in

sleep mode.

4

Getting to Know Your Device

SMS

Blue solid You have unread messages.

Blue

blinking

You have new messages.

off No unread messages.

Battery

Red solid

/ blinking

The battery is low. Please charge

the battery.

Green

blinking

The battery is being charged or

in standby mode.

Green

solid

The battery level is middle or

high.

off

Your device is not being charged,

or the battery is not inserted.

5

Getting to Know Your Device

Connection Scenarios

The device can access the Internet in two ways and it

allows multiple clients to surf on the Internet at the same

time. The following gures are for your reference only.

• 3G Mode: A (U)SIM card can be used to access the

Internet.

• Internet Wi-Fi Mode: Your device can be connected

to a WLAN device (such as a hotspot device or wire-

less router) through Wi-Fi to access the Internet. The

WLAN device must be already connected to the Inter-

net.

NOTE: Your device and the WLAN device must be in

different subnets.

6

Getting to Know Your Device

Installing Your Device

1. Slide the back cover and remove it.

NOTE: Do not remove the cover rudely.

2. Install a (U)SIM card to the (U)SIM card slot.

WARNING!

Your device does not support the micro-SIM and nano-SIM

card or any other non-standard SIM cards. To avoid damag-

ing the device, do not use those cards or any card holders.

7

Installing Your Device

3. Install the microSDHC card if necessary.