User’’s Manual
User’’s Manual
Intel Pentium 4
Socket 478 CPU
AMD Athlon 64
Socket 754 CPU
(English Edition)
AMD Athlon/
Duron/Athlon XP
Socket 462 CPU
ZM-WB2 Gold
* Please read before installation
http://www.zalman.co.kr http://www.zalmanusa.com
1. Features
1)
Gold plated pure copper base maximizes cooling performance and prevents CPU blocks from galvanic corrosion
2) Intel Pentium 4 (Socket 478), AMD Athlon/Duron/Athlon XP (Socket 462),Athlon 64 (Socket 754)
compatible design for broad compatibility.
3) Three types of compression fitting are offered for use with water tubes (8X10mm,8X11mm,10X13mm)
* Zalman Tech. Co., Ltd. is not responsible for any damage resulting from CPU OVERCLOCKING.
2. Specifications
Part No
NOTE 1) The maximum weight for the cooler is specified as 450g/450g/300g for socket
Part name
1
CPU block
2
Hand screw
3
Thermal grease
4
5
6
7
8
9
10
11
12
13
Clip
User’s manual
Clip supports
Clip supports A
Clip supports B
Bolts
Paper washer
Nipple
Back plate
Fitting
478/754/462 respectively. Special care should be taken when moving a computer
equipped with a cooler which exceeds the relevant weight limit. Zalman Tech Is not
responsible for any damage that occurs when moving a computer.
* The specifications of any product may change without prior notice to improve the performance thereof.
Q’ ty
1 set
3 set
Weight (g)
1
447.0
2
8.0
1
1.8
1
9.6
1
2
8.2
2
5.0
2
5.0
4
0.8
2
6.2
60.0
Use
CPU mountimg
Clip mountimg
Apply to cpu core
CPU block mountimg
Socket 478
Socket 462
Socket 462
Clip supports, A, B-type
7, 8 mountimg
Socket 754 mountimg
Socket 754 mountimg
Fitting to
8 x 10mm, 8 x 11mm, 10 x 13mm tubes
1
3. Exploded View
1) Exploded view of CPU block
a Block base
①①
①① bb BBlloocckk ccoovveerr
Fittings
⑬⑬
2) Exploded view for CPU type using ZM-WB2 Gold
②
④
①
⑥
⑬
①b
a
①
②
②
④
①
⑪
⑩
⑧
④
①
⑦
⑨
⑫
Intel Pentium 4
Socket 478 CPU
* The specifications of any product may change without prior notice to improve the performance thereof.
AMD Athlon 64
Socket 754 CPU
AMD Athlon/
Duron/Athlon XP
Socket 462 CPU
⑩
⑨
2
4. Components
1) Common Components
CPU block - 1 pc.
①
Hand screw - 2 pcs.
②
Thermal grease - 1 pc.
③
Clip - 1 pc.
④
User’s manual
⑤
Fittings - 6 pcs. (3 sets)
⑬
2) Components for Intel Pentium 4 (Socket 478)
Two (2) Clip Supports for Socket 478
⑥
3) Components for AMD Athlon / Athlon XP (Socket 462)
One (1) A -Type(blue) Clip Support for AMD Socket 462
⑦
One (1) B -Type(white) Clip Support for AMD Socket 462
⑧
Four Bolts - For Fastening Clip Supports
⑨
One Set of Washers
⑩
⑦⑧ ⑨ ⑩
4) Components for AMD Athlon 64 (Socket 754)
Two Nipples
⑪
One Backplate
⑫
* The specifications of any product may change without prior notice to improve the performance thereof.
①②⑬ ⑤
⑪⑫
③④
⑥
3
5. Compatible CPU Types
1) Intel Pentium 4 - Socket 478
All speeds of Pentium 4 Socket 478 CPUs
Caution
As shown in Figure 2, a mainboard that is not compliant with the “10.2 mm mainboard
component height restriction” standard, introduced by Intel, may create interference between
components and the clip. Please do not install the ZM-WB2 when this interference is observed.
10.2mm Motherboard component height restriction
Clip
Mainboard
component
Top View Top View
2) AMD Athlon/Duron/Athlon XP - Socket 462
Figure 1 (O) Figure 2 (X)
All speeds of AMD Socket 462 CPUs
Side View Side View
Clip
Mainboard
component
Caution
①
This product requires "Heatsink Attach Holes" around
CPU Socket as shown on the right.
②
This product can not be installed if any Motherboard
component(capacitor) taller than 1.5cm is located
under the clip.
3) AMD Athlon 64 - Socket 754
All speeds of AMD Socket 754 CPUs
* The specifications of any product may change without prior notice to improve the performance thereof.
Clip
①
Heat sink attach holes
②
4
6. Cautions During Installation
1) Keep this product away from children.
2) Zalman Tech. Co., Ltd. is not responsible for any problems arising from using the product outside its
intended purpose..
3) The exposed core of a Socket 462 CPU can be damaged if proper care is not taken. Read the
“Installation” section thoroughly before installing.
4) Please do not install this product if ZM-WB2 interferes with any mainboard components.
5) Zalman Tech. Co., Ltd. is not responsible for any problems arising from using the ZM-WB2.
7. Installation
1) Apply Thermal Grease
Spread thermal grease thinly and evenly
over the CPU core (IHS).
2) Install Clip Support
Install the two clip supports at both sides of
the retention guide as shown on the right.
(INTEL Pentium 4, Socket 478)
* The specifications of any product may change without prior notice to improve the performance thereof.
Retention Guide
CPU
Thermal Grease
Clip Support
5
3) Insert Hand screws
Insert hand screws into the inner holes on the clip.
Hand screw
Outer hole
4) Fasten Hand screws
Place the CPU block on the center of the CPU.
Screw in both Hand screws in an alternating
fashion until they are completely tightened.
8. Installation-AMD XP/Duron, Socket 462
1) Install Clip spport
Install the socket 462 clip supports
as shown on the right.
Be sure to install A -Type clip
support (Blue) next to the lever.
* The specifications of any product may change without prior notice to improve the performance thereof.
Paper
washer
Mainboard
Paper washer
Bolts
B-Type Clip Support (White)
A-Type Clip Support (Blue)
B-Type Clip Support (White)
Clip
Inner hole
Clip
Lever
6
2) Apply Thermal Grease
Spread thermal grease thinly and evenly over the CPU.
CPU
3) Insert Hand screws
Insert hand screws into the outer holes on the clip.
4) Fasten Hand screws
Place the CPU block on the center of the CPU.
Screw in both hand screws in an alternating
fashion until they are completely tightened.
Outer hole
B-Type Clip Support
Thermal Grease
9. Installation-AMD XP/Duron, Socket 462
1) Fasten Nipples
Position the backplate on the bottom of the
mainboard under the CPU socket, then
fasten the nipples as shown on the right.
* When installing the ZM-WB2 on an Athlon
64, the retention frame is not needed.
* The specifications of any product may change without prior notice to improve the performance thereof.
Large Hole
Washer
Main board
Inner hole
Clip
A-Type
Clip Support
Nipple
Backplate
7
2) Apply Thermal Grease
Spread thermal grease thinly and evenly over the CPU.
3) Insert Hand screws
Insert hand screws into the outer holes on the clip.
4) Fasten Hand screws
Place the CPU block on the center of the
CPU. Partially screw the bolts into the nipples.
Then, screw both bolts down further in an
alternating fashion until they are completely
tightened.
Outer hole
CPU
Thermal Grease
Hand screw
Clip
Inner hole
10. Build a noiseless system
Creating a Complete Noiseless System
Use the following Zalman products to achieve stable and silent operation of your computer, Noiseless
Power Supply, Fanless Coolers for Northbridge Chipset & Video Card, and Noiseless Fan.
Power supply
ZM400A-APF
VGA Cooler
ZM80C-HP
Northbridge Cooler
ZM-NB47J
HDD Cooler
ZM-2HC1
* The specifications of any product may change without prior notice to improve the performance thereof.
Noiseless fan
8
Loading...