English Version
Installation Notes
1. Do not place the unit in dusty or humid conditions, under direct sunlight, or near a heat
source such as a room heater.
2. Do not drop or subject the unit to excessive force.
3. Check the CPU socket compatibility before installation.
4. Do not mix any contaminants with the coolant when filling. It may cause product failure
or corrosion.
5. Place the unit on top of the PC or a location with good ventilation.
6. Check for leaks on the Water Blocks and Tubes before installation.
7. Preparing the necessary tools (Needle-Nose Pliers, Scissors) will ease the installation
process.
Operational Notes
1. Check to see if the DC cables are properly connected before use.
2. If the coolant is not circulating properly or if the pump’s flow rate becomes too low for
other reasons, then the red LED will begin to flicker with an alarm sound. Immediately
turn the PC OFF and contact the place of purchase.
3. Do not place any objects on the product.
4. Install the unit on a leveled surface free of vibration, and do not tilt or lay the unit on its
side while using.
5. Must use the provided coolant. Regularly check the amount of coolant and replenish
as needed (must be with new coolant every year).
6. If a leak is found, turn off the system immediately and contact the place of purchase.
7. Separate the Reserator from the PC case when moving the system.
8. Do not block the Air Ducts on either side of the product with any object. It could lead to
fan failure, increased noise, or a decrease in product performance.
9. Make sure that the Water Pump is functioning properly.
Installation and Operational Notes
1
•The specifications of this product and its components may change without prior notice to improve performance.
RESERATOR
XT
Zalman Tech Co., Ltd. is not responsible for any damages due to external causes,
including but not limited to, improper use, problems with electrical power, accident,
neglect, alteration, repair, improper installation, or improper testing.
Disclaimer
RESERATOR
XT
2
•The specifications of this product and its components may change without prior notice to improve performance.
English Version
English
Visit our website (www.zalman.co.kr) and watch the Reserator XT
installation video for an installation overview.
※ Please read this manual thoroughly before installation.
※ The specifications of this product and its components may change without
prior notice to improve performance.
1) CPU Water Block (ZM-WB5)
The CPU Water Block incorporates a pure copper base for
excellent heat transfer. The Water Block Cover has been anodized
to prevent corrosion. It supports Intel’s Socket 775 CPUs and
AMD’s Socket 754/939/940/AM2 CPUs, and is designed to be light
weight and easy to install.
2) Anti-Corrosion Coolant (ZM-G300)
This coolant contains a high quality anti-corrosion agent for various
materials including copper, aluminum, plastic, and other metals that
prevents corrosion for long term operation.
3) FND(Flexible Numeric Display)
Displays the internal temperature, water temperature, water level,
and mode. The black background and wine color details intensify
the aesthetics.
4) Analog Gauge
Displays the fan speed and pump’s flow rate. The wine colored
lighting adds a touch of elegance and tuning effect.
5) Automatic Control
The internal coolant temperature sensor automatically regulates
the fan speed and coolant flow rate for optimal cooling and ultra
quiet operation.
6) Flow Indicator
This component is connected with the circulation tube for checking
the circulation of the coolant. When the coolant is circulating
properly, its impeller rotates to visually indicate the status of
coolant flow.
7) Quick Coupling
The Fittings incorporate valves that prevent leaks when
disassembling the Reserator, allowing quick and convenient
separation and reassembly of the Reserator for transport and
coolant replacement.
RESERATOR
XT
RESERATOR
XT
Table of Contents
1. Features
Installation and Operational Notes
1. Features ………………………………………………………………………………………3
2. Specifications …………………………………………………………………………………5
3. Installation Overview …………………………………………………………………………6
4. Components …………………………………………………………………………………7
5. Installation Guide ……………………………………………………………………………8
6. Optional Products …………………………………………………………………………17
English
•High Performance Ultra Quiet Water Cooling System
•Active/Passive Hybrid Cooling Design
- Active Cooling: 140mm Fan (Forced Convection Cooling)
- Passive Cooling: Anodized Aluminum Heatsink Chassis(Natural Convection Cooling)
•Automatic/Manual Control Modes
- Automatic Mode: Coolant Temperature is monitored for Automatic Control of Fan
Speed and Coolant Flow Rate.
- Manual Mode: Front Panel Control Knob allows the user to manually optimize
performance and minimize noise
•Warning & Alarm System
- Coolant Flow Monitoring: Warns the user when coolant flow is problematic.
- Coolant Level Monitoring: Warns the user when the coolant level is low.
•Comprehensive Visual Monitoring Display
- Coolant Temperature (viewable in ℃ or ℉)
- Ambient Temperature (viewable in ℃ or ℉)
- Coolant Level Warning Icon (Lights Up When Coolant Level Is Low)
•Coolant Flow Rate
- Coolant Flow Indicator
- Light Switch
•Automatic Power ON/OFF In Sync with the Computer
•Quick Couplings for Fast, Convenient, and Leak-Free Installation & Maintenance
3
•The specifications of this product and its components may change without prior notice to improve performance.
4
•The specifications of this product and its components may change without prior notice to improve performance.
Loading...