ZALMAN GS1000 Plus User Manual

www.zalman.com
English version
◈ Please read this manual thoroughly before installation.
◈ Please visit the GS1000 web page at Zalman’s website to view the GS1000
installation video.
E-mail: zalman@zalman.com
GS1000 PLUS
2
1. Cautionary Notes 3
2. Specifications 4
3. Parts List 5
4. Installation 8
5. Options 15
6. Quality Assurance and Warranty Information 16
Contents
3
English
GS1000 PLUS
1) Please thoroughly read and understand the contents of this User Manual prior to installation.
2) Check the components list and condition of the product before installation. If any problem is found, contact the retailer to obtain a replacement.
3) Refrain from touching any moving parts to prevent injuries.
4) Please refer to the manual for cable setup/installation. Incorrect installation can lead to short-circuiting and/or damage(s).
5) Do not block the front and rear air vents.
6) Place on a flat, stable surface with good ventilation, and avoid areas with direct sunlight, oil, water or excessive moisture.
7) Do not cleanse any surface with chemical cleaners or solvents.(chemicals including but not limited to: industrial brightener, wax, benzene, alcohol, paint thinner, mosquito repellent, aromatics, lubricant, detergent etc.)
8) Please wear gloves during the installation process to prevent injuries.
9) The specifications of any product may change without prior notice to improve performance
Disclaimer) Zalman Tech Co., Ltd. is not responsible for any damages due
to extemal causes, including but not limited to, improper use, problems with electrical power, accident, neglect, alternation, repair, improper installation, or improper testing.
1
Cautionary Notes
4
2
Specifications
Type Full Tower
Dimensions 640mm x 260mm x 570mm (including feet)
(D x W x H) (25.2 x 10.2 x 22.4 )
Weight 15.7kg (34.54lb)
Material(s)
Aluminum / ABS / Steel
Color Options Black / Titanium
Motherboard Compatibility E-ATX / Standard ATX / microATX
PSU Compatibility Standard ATX / ATX12V
PCI/AGP card Compatibility Full Size
5.25" Bays x 4 (2 can serve as 3.5")
3.5" Bays x 6 (3 support Hot Swap, 3 are optional)
Cooling Components
Top Vent: 120mm Fan Vent x 2
(1 Fan included, 1 optional)
Front Vent: 92mm Fan Vent x 2
(2 Fans included)
Rear Vent: 120mm Fan Vent x 1
(1 Fan included)
Bottom Vent: 120mm Fan Vent x 2
(Fans optional)
Expansion Slots
(Tool Free Bolts provided)
x 7 slots
Front I/O port
USB x 2 e-SATA x 1 Headphones x 1 Mic x1
Supports Hot Swap SATA I, SATA II
5
English
GS1000 PLUS
1) GS1000 PLUS
3
Parts List
Headphones
POWER
Mic
e-SATA
USB 2.0
Front View
Rear View
Top View
Side View
Loading...
+ 11 hidden pages