Yamaha PSR-262E, psr-262 User Manual

SPECIAL MESSAGE SECTION

This product utilizes batteries or an external power supply (adapter). DO NOT
connect this product to any power supply or adapter other than one described
in the manual, on the name plate, or specifically recommended by Yamaha.

This product should be used only with the components supplied or; a cart,
rack, or stand that is recommended by Yamaha. If a cart, etc., is used, please
observe all safety markings and instructions that accompany the accessory
product.

SPECIFICATIONS SUBJECT TO CHANGE:

The information contained in this manual is believed to be correct at the time
of printing. However, Yamaha reserves the right to change or modify any of
the specifications without notice or obligation to update existing units.

This product, either alone or in combination with an amplifier and head­phones or speaker/s, may be capable of producing sound levels that could
cause permanent hearing loss. DO NOT operate for long periods of time at a
high volume level or at a level that is uncomfortable. If you experience any
hearing loss or ringing in the ears, you should consult an audiologist.
IMPORTANT: The louder the sound, the shorter the time period before dam­age occurs.

NOTICE:

Service charges incurred due to a lack of knowledge relating to how a func­tion or effect works (when the unit is operating as designed) are not covered
by the manufacturer’s warranty, and are therefore the owners responsibility.
Please study this manual carefully and consult your dealer before requesting
service.

ENVIRONMENTAL ISSUES:

Yamaha strives to produce products that are both user safe and environmen­tally friendly. We sincerely believe that our products and the production meth­ods used to produce them, meet these goals. In keeping with both the letter
and the spirit of the law, we want you to be aware of the following:

Battery Notice:

This product MAY contain a small non-rechargeable battery which (if applica­ble) is soldered in place. The average life span of this type of battery is
approximately five years. When replacement becomes necessary, contact a
qualified service representative to perform the replacement.

This product may also use “household” type batteries. Some of these may be
rechargeable. Make sure that the battery being charged is a rechargeable
type and that the charger is intended for the battery being charged.

When installing batteries, do not mix batteries with new, or with batteries of a
different type. Batteries MUST be installed correctly. Mismatches or incorrect
installation may result in overheating and battery case rupture.

Warning:

Do not attempt to disassemble, or incinerate any battery. Keep all batteries
away from children. Dispose of used batteries promptly and as regulated by
the laws in your area. Note: Check with any retailer of household type batter­ies in your area for battery disposal information.

Disposal Notice:

Should this product become damaged beyond repair, or for some reason its
useful life is considered to be at an end, please observe all local, state, and
federal regulations that relate to the disposal of products that contain lead,
batteries, plastics, etc. If your dealer is unable to assist you, please contact
Yamaha directly.

NAME PLATE LOCATION:

The name plate is located on the bottom of the product. The model number,
serial number, power requirements, etc., are located on this plate. You should
record the model number, serial number, and the date of purchase in the
spaces provided below and retain this manual as a permanent record of your
purchase.

Model

Serial No.

Purchase Date

92-BP

(bottom)

PLEASE KEEP THIS MANUAL

FCC INFORMATION (U.S.A.)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions contained in
this manual, meets FCC requirements. Modifications not expressly
approved by Yamaha may void your authority, granted by the FCC, to use
the product.

2. IMPORTANT:

another product use only high quality shielded cables. Cable/s supplied
with this product MUST be used. Follow all installation instructions. Failure
to follow instructions could void your FCC authorization to use this product
in the USA.

3. NOTE:

requirements listed in FCC Regulations, Part 15 for Class “B” digital
devices. Compliance with these requirements provides a reasonable level
of assurance that your use of this product in a residential environment will
not result in harmful interference with other electronic devices. This equip­ment generates/uses radio frequencies and, if not installed and used
according to the instructions found in the users manual, may cause inter­ference harmful to the operation of other electronic devices. Compliance

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA.

OBSERVERA!

Apparaten kopplas inte ur växelströmskällan (nätet) sá länge som den ar
ansluten till vägguttaget, även om själva apparaten har stängts av.

ADVARSEL: Netspæendingen til dette apparat er IKKE afbrudt, sálæenge

netledningen siddr i en stikkontakt, som er t endt — ogsá selvom der or
slukket pá apparatets afbryder.

VAROITUS: Laitteen toisiopiiriin kytketty käyttökytkin ei irroita koko laitetta

verkosta.

When connecting this product to accessories and/or

This product has been tested and found to comply with the

with FCC regulations does not guarantee that interference will not occur in
all installations. If this product is found to be the source of interference,
which can be determined by turning the unit “OFF” and “ON”, please try to
eliminate the problem by using one of the following measures:

Relocate either this product or the device that is being affected by the
interference.

Utilize power outlets that are on different branch (circuit breaker or fuse)
circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the antenna. If the
antenna lead-in is 300 ohm ribbon lead, change the lead-in to co-axial
type cable.

If these corrective measures do not produce satisfactory results, please
contact the local retailer authorized to distribute this type of product. If you
can not locate the appropriate retailer, please contact Yamaha Corpora­tion of America, Electronic Service Division, 6600 Orangethorpe Ave,
Buena Park, CA90620

The above statements apply ONLY to those products distributed by
Yamaha Corporation of America or its subsidiaries.

(class B)

Entsorgung leerer Batterien (nur innerhalb Deutschlands)

Leisten Sie einen Beitrag zum Umweltschutz. Verbrauchte Batterien oder
Akkumulatoren dürfen nicht in den Hausmüll. Sie können bei einer Sam­melstelle für Altbatterien bzw. Sondermüll abgegeben werden. Informieren
Sie sich bei Ihrer Kommune.

(battery)

(standby)

2

Yamaha cannot be held responsible for damage caused by improper
use or modifications to the instrument, or data that is lost or destroyed.

* The illustrations and LCD screens as shown in this owner’s manual

are for instructional purposes only, and may be different from the
ones on your instrument.

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep these precautions in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock,
short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:

• Do not open the instrument or attempt to disassemble the internal parts or
modify them in any way. The instrument contains no user-serviceable
parts. If it should appear to be malfunctioning, discontinue use immedi­ately and have it inspected by qualified Yamaha service personnel.

• Do not expose the instrument to rain, use it near water or in damp or wet
conditions, or place containers on it containing liquids which might spill
into any openings.

• If the AC adaptor cord or plug becomes frayed or damaged, or if there is a
sudden loss of sound during use of the instrument, or if any unusual
smells or smoke should appear to be caused by it, immediately turn off the

power switch, disconnect the adaptor plug from the outlet, and have the
instrument inspected by qualified Yamaha service personnel.

• Use the specified adaptor (PA-3B or an equivalent recommended by
Yamaha) only. Using the wrong adaptor can result in damage to the instru­ment or overheating.

• Before cleaning the instrument, always remove the electric plug from the
outlet. Never insert or remove an electric plug with wet hands.

• Check the electric plug periodically and remove any dirt or dust which may
have accumulated on it.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the
instrument or other property. These precautions include, but are not limited to, the following:

• Do not place the AC adaptor cord near heat sources such as heaters or
radiators, and do not excessively bend or otherwise damage the cord,
place heavy objects on it, or place it in a position where anyone could walk
on, trip over, or roll anything over it.

• When removing the electric plug from the instrument or an outlet, always
hold the plug itself and not the cord.

• Do not connect the instrument to an electrical outlet using a multiple-con­nector. Doing so can result in lower sound quality, or possibly cause over­heating in the outlet.

• Unplug the AC power adaptor when not using the instrument, or during
electrical storms.

• Always make sure all batteries are inserted in conformity with the +/­polarity markings. Failure to do so might result in overheating, fire, or bat­tery fluid leakage.

• Always replace all batteries at the same time. Do not use new batteries
together with old ones. Also, do not mix battery types, such as alkaline bat­teries with manganese batteries, or batteries from different makers, or dif­ferent types of batteries from the same maker, since this can cause
overheating, fire, or battery fluid leakage.

• Do not dispose of batteries in fire.

• Do not attempt to recharge batteries that are not intended to be charged.

• When the batteries run out, or if the instrument is not to be used for a long
time, remove the batteries from the instrument to prevent possible leakage
of the battery fluid.

• Keep batteries away from children.

• If the batteries do leak, avoid contact with the leaked fluid. If the battery
fluid should come in contact with your eyes, mouth, or skin, wash immedi­ately with water and consult a doctor. Battery fluid is corrosive and may
possibly cause loss of sight or chemical burns.

• Before connecting the instrument to other electronic components, turn off
the power for all components. Before turning the power on or off for all
components, set all volume levels to minimum. Also, be sure to set the
volumes of all components at their minimum levels and gradually raise the
volume controls while playing the instrument to set the desired listening
level.

• Do not expose the instrument to excessive dust or vibrations, or extreme
cold or heat (such as in direct sunlight, near a heater, or in a car during the

day) to prevent the possibility of panel disfiguration or damage to the inter­nal components.

• Do not use the instrument near other electrical products such as televi­sions, radios, or speakers, since this might cause interference which can
affect proper operation of the other products.

• Do not place the instrument in an unstable position where it might acci­dentally fall over.

• Before moving the instrument, remove all connected adaptor and other
cables.

• When cleaning the instrument, use a soft, dry cloth. Do not use paint thin­ners, solvents, cleaning fluids, or chemical-impregnated wiping cloths.
Also, do not place vinyl, plastic or rubber objects on the instrument, since
this might discolor the panel or keyboard.

• Do not rest your weight on, or place heavy objects on the instrument, and
do not use excessive force on the buttons, switches or connectors.

• Use only the stand specified for the instrument. When attaching the stand
or rack, use the provided screws only. Failure to do so could cause damage
to the internal components or result in the instrument falling over.

• Do not operate the instrument for a long period of time at a high or uncom­fortable volume level, since this can cause permanent hearing loss. If you
experience any hearing loss or ringing in the ears, consult a physician.

■

SAVING USER DATA

• Always save data to an external device such as the Yamaha MIDI data filer
MDF3 frequently, in order to help prevent the loss of important data due to
a malfunction or user operating error.

Always turn the power off when the instrument is not in use.
Make sure to discard used batteries according to local regulations.

(4)-7

3

■

●

●

●

■

■

Congratulations on your purchase of the Yamaha PSR-262 PortaTone!

You now own a portable keyboard that combines advanced functions, great sound

and exceptional ease-of-use in a highly compact package. Its outstanding features

also make it a remarkably expressive and versatile instrument.

Read this Owner’s Manual carefully while playing your new PSR-262 in order to

take full advantage of its various features.

Main Features

The PSR-262 is a sophisticated yet easy-to-use keyboard with the following features and functions:

Yamaha Education Suite

The PSR-262 features the new Yamaha Education Suite — a set of learning tools that utilize the latest
technology to make studying and practicing music more fun and fulfilling than ever before!

The Yamaha Education Suite includes:

Lesson ............................. page 34

The convenient and easy-to-use Lesson feature, guides you through the parts of a song — just like a
patient teacher! Select from any one of 100 songs on the PSR-262, and learn the left- and right-hand
parts independently at first, then together. Lesson features four easy steps that help you master each
song: Timing, Waiting, Minus One, and Both Hands.

Grade & Talking ............................. pages 39, 40

The PSR-262 also has the Grade and Talking features. Grade is a virtual “teacher,” evaluating your
practice sessions and rating your performance. The convenient Talking function “announces” each
Lesson step and your “grades,” among other things.

Dictionary ............................. page 41

Dictionary is a built-in “chord encyclopedia” that teaches you how to play specific chords by showing
you the appropriate notes in the display — perfect for when you know the name of a chord and want to
quickly learn how to play it!

Portable Grand ............................. page 20

The PSR-262 also has a Portable Grand function for realistic piano performance. Pressing the [Piano]
button instantly calls up the stunningly authentic “Stereo Sampled Piano” voice and configures the entire
PSR-262 for optimum piano play. Special Pianist styles — with piano-only accompaniment — are also
provided.

DJ ............................. page 22

The DJ feature is an exciting new addition to the PSR-262, that puts a wealth of contemporary sounds and
rhythms at your fingertips. Pressing the [DJ] button instantly calls up one of the special DJ songs (“DJ
GAME”) and a DJ style, and provides the appropriate voice and sound effects to match.

Other powerful features include:

• Exceptionally realistic and dynamic sounds with 100 voices,
utilizing digital recordings of actual instruments.

• T ouch Response lets you dynamically and e xpressively control
the volume of the voices with your playing strength — just as
on an acoustic piano.

• 100 dynamic auto accompaniment Styles, each with different
Intro, Main A and B, and Ending sections. All styles (except
for the Piano styles) also have their own two Fill-in patterns.

• Large custom LCD gives you easy, at-a-glance confirmation of
all important settings, as well as chord and note indications.

• 100 songs, for your listening enjoyment — or for use with the
sophisticated learning tools of the Yamaha Education Suite.

4

• Convenient control over accompaniment Styles — including
Tempo, Tap Tempo and independent Accompaniment Volume.

• Four Multi Pads, for instantly adding special instrumental
breaks, fills, and phrases to your performance.

• One Touch Setting (OTS), for automatically calling up an
appropriate voice for playing with the selected Style and Song.

• MIDI terminals for interfacing with other MIDI devices.

• The PSR-262 also has a Sustain jack.

• Built-in, high-quality stereo amplifier/speaker system.

Contents

Panel Controls and Terminals........................6

Setting Up.........................................................8

• Power Requirements ..........................................8

• Turning On the Power.........................................8

• Accessory Jacks.................................................9

Quick Guide 10

Step 1 Voices ........................................................... 10

Step 2 Songs............................................................ 12

Step 3 Auto Accompaniment ..................................... 14

Step 4 Lesson .......................................................... 16

Getting Started

— Playing the Demo Songs..........................18

Panel Display Indications .............................19

Portable Grand...............................................20

• Playing the Portable Grand...............................20

• Using the Metronome .......................................20

DJ ....................................................................22

• Playing the DJ...................................................22

Talking............................................................ 40

Dictionary....................................................... 41

Selecting and Playing Styles........................ 42

• Selecting and Playing a Style .......................... 42

• Playing the Accompaniment ............................ 43

• Changing the Tempo ....................................... 46

• Style Sections (Main A, Main B) and Fill-ins.... 46

• Adjusting the Accompaniment Volume ............ 47

• Using Auto Accompaniment

— Multi Fingering............................................. 48

• Multi Pads ........................................................ 51

MIDI................................................................. 52

Troubleshooting............................................ 53

Voice List ....................................................... 54

Drum Kit List.................................................. 56

Style List & Multi pads.................................. 57

MIDI Implementation Chart........................... 58

Specifications................................................ 60

Index............................................................... 61

Selecting and Playing Voices.......................23

• Selecting and Playing a Voice ..........................23

• One Touch Setting............................................26

• Transpose and Tuning......................................27

• Touch Response...............................................28

Selecting and Playing Songs........................29

• Selecting and Playing a Song...........................29

• Melody Voice Change.......................................30

• Changing the Tempo ........................................31

• Adjusting the Song Volume ..............................32

• Song Controls...................................................32

• A-B Repeat .......................................................33

Song Lesson ..................................................34

• Using the Lesson Feature.................................34

• Lesson 1 — Timing...........................................36

• Lesson 2 — Waiting..........................................37

• Lesson 3 — Minus One ....................................37

• Lesson 4 — Both Hands...................................38

• Grade................................................................39

5

■

Panel Controls and Terminals

Front Panel

y

q

w

e

t

r

000

!7

!6!5!4!3!2

Power switch ([STANDBY/ON])

q

w

[MASTER VOLUME] dial

This determines the overall volume of the PSR-262.

[TOUCH] button

e

This turns the Touch Response function on and off. It
also lets you set the Touch Sensitivity setting. (See
page 28.)

r

[Dict.] (DICTIONARY) button

This calls up the Dictionary function (See page 41).

t

LESSON [L] (Left) and [R] (Right) buttons

These call up the Lesson exercises for the correspond­ing hand (left or right) for the selected song. (See
page 35.)

!1

GrandPno

116

u

o

TEMPO

i !0

@0!9!8

@1

[DJ] button

!0

This instantly calls up a special DJ voice, song and
style. (See page 22.)

Numeric keypad, [+/ON] and [-/OFF]

!1

buttons

These are used for selecting songs, voices, and styles.
(See page 24.) They are also used for entering values
and adjusting or making certain settings.

!2

[ACCOMPANIMENT ON/OFF]
([A-B REPEAT]) button

When the Style mode is selected, this turns the auto
accompaniment on and off. (See page 43.) When the
Song mode is selected, this controls the A-B Repeat
function. (See page 33.)

[OVERALL] button

y

This is for selecting the various “overall” functions.
(See page 21.)

u

[DEMO] button

This is used to play the Demo songs. (See page 18.)

i

[Piano] button

This instantly calls up the Grand Piano voice, plus a
special piano song and style. (See page 20.)

[METRONOME] button

o

This turns the metronome on and off. (See page 20.)

6

!3

[SYNC START] ([ PAUSE]) button

When the Style mode is selected, this turns the Sync
Start function on and off. (See page 44.) When the
Song mode is selected, this alternately pauses and
starts song playback. (See page 32.)

!4

[START/STOP] button

When the Style mode is selected, this alternately starts
and stops the auto accompaniment. (See page 43.)
When the Song mode is selected, this alternately starts
and stops song playback. (See page 32.)

■

Panel Controls and Terminals

!5

[INTRO/ENDING] ([ REW]) button

When the Style mode is selected, this is used to con­trol the Intro and Ending functions. (See page 45.)
When the Song mode is selected, this is used to
rewind during song playback. When song playback is
stopped, it is used to reverse to specific measure num­bers in the song. (See page 32.)

[MAIN/AUTO FILL] ([ FF]) button

!6

When the Style mode is selected, this is used to
change auto accompaniment sections and control the
Auto Fill function. (See page 46.) When the Song
mode is selected, this is used to fast forward during
song playback. When song playback is stopped, it is
used to advance to specific measure numbers in the
song. (See page 32.)

!7

[TEMPO/TAP] button

This button allows you to tap out the tempo and auto­matically start a selected song or style at that tapped
speed. (See page 44.) It also is used to call up the
Tempo setting, letting you set the Tempo with the
numeric keypad or [+]/[-] buttons. (See page 31.)

!8

[SONG] button

This is for enabling song selection. (See page 29.)

!9

[STYLE] button

This is for enabling style selection. (See page 42.)

@0

[VOICE] button

This is for enabling voice selection. (See page 23.)
Holding down this button calls up the Melody Voice
Change function. (See page 30.)

[MULTI PAD] buttons

@1

These are used to automatically play pre-programmed
musical phrases. (See page 51.)

Rear Panel

@2 @3 @4 @5

@2

PHONES/OUTPUT jack

This is for connection to a set of stereo headphones or
to an external amplifier/speaker system. (See page 9.)

DC IN 10-12V jack

@3

This is for connection to a PA-3B AC power adaptor.
(See page 8.)

@4

MIDI IN, OUT terminals

These are for connection to other MIDI instruments
and devices. (See pages 9, 52.)

@5

SUSTAIN jack

This is for connection to an optional FC4 or FC5
Footswitch. (See page 9.)

7

●

■

■

●

Setting Up

This section contains information about setting up your PSR-262 for playing. Make sure to
read this section carefully before using the instrument.

Power Requirements

Although the PSR-262 will run either from an optional AC adaptor or batteries,
Yamaha recommends use of an AC adaptor whenever possible. An AC adaptor is
more environmentally friendly than batteries and does not deplete resources.

Using an AC Power Adaptor • • • • • • • • • • • • • • • • • • • • • • • • •

To connect your PSR-262 to a wall socket, you will need the optionally available
Yamaha PA-3B Power Adaptor. Use of other AC adaptors could result in damage
to the instrument, so be sure to ask for the right kind. Connect one end of the
adaptor to the DC IN 10-12V jack on the rear panel of your PSR-262, and the
other end to a suitable electrical outlet.

• Use ONLY a Yamaha PA-3B AC
Power Adaptor (or other adap­tor specifically recommended
by Yamaha) to power your
instrument from the AC mains.
The use of other adaptors may
result in irreparable damage to
both the adaptor and the PSR-

262.

• Unplug the AC Power Adaptor
when not using the PSR-262,
or during electrical storms.

Using Batteries • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Inserting Batteries

Turn the instrument upside-do wn and remove the battery compartment lid. Insert
six 1.5-volt size “D” (SUM-1, R-20 or equivalent) batteries as shown in the illus­tration, making sure that the positive and negative terminals are properly aligned,
and replace the lid.

BATTERIES 1.5V x 6

When the Batteries Run Down

When the batteries run low and the battery voltage drops belo w a certain le vel, the
PSR-262 may not sound or function properly. As soon as this happens, replace
them with a complete set of six new batteries.

Turning On the Power

• Never mix old and new batter­ies or different types of batter­ies (e.g., alkaline and
manganese).

• To prevent possible damage
from battery leakage, remove
the batteries from the instru­ment if it is not to be used for a
long time.

With the AC power adaptor connected or with batteries installed, simply press the
ST ANDBY switch until it locks in the ON position. When the instrument is not in
use, be sure to turn the power off. (Press the switch again so that it pops up.)

8

• Even when the switch is in the
“STANDBY” position, electric­ity is still flowing to the instru­ment at the minimum level.
When you are not using the
PSR-262 for a long time, make
sure you unplug the AC power
adaptor from the wall AC out­let, and/or remove the batteries
from the instrument.

Accessory Jacks

-

MIDI

instrument

Using Headphones• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

For private practicing and playing without disturbing others, connect a set of ste­reo headphones to the rear panel PHONES/OUTPUT jack. Sound from the built­in speaker system is automatically cut off when you insert a headphone plug into
this jack.

■

■

■

■

Setting Up

Connecting a Keyboard Amplifier or Stereo System • • • • • • •

Though the PSR-262 is equipped with a built-in speaker system, you can also play
it through an external amplifier/speaker system. First, make sure the PSR-262 and
any external devices are turned of f, then connect one end of a stereo audio cable to
the LINE IN or AUX IN jack(s) of the other device and the other end to the rear
panel PHONES/OUTPUT jack on the PSR-262.

Using a Sustain Footswitch • • • • • • • • • • • • • • • • • • • • • • • • •

This feature lets you use an optional footswitch (Yamaha FC4 or FC5) to sustain
the sound of the keyboard voice. This is used in the same way as a damper pedal
on an acoustic piano — press and hold down the footswitch as you play the key­board to sustain the sound.

• To prevent damage to the
speakers, set the volume of the
external devices at the mini­mum setting before connect­ing them. Failure to observe
these cautions may result in
electric shock or equipment
damage. Also, be sure to set
the volumes of all devices at
their minimum levels and grad
ually raise the volume controls
while playing the instrument to
set the desired listening level.

• Make sure that the footswitch
plug is properly connected to the
SUSTAIN jack before turning on
the power.

• Do not press the footswitch while
turning the power on. Doing this
changes the recognized polarity
of the footswitch, resulting in
reversed footswitch operation.

Using the MIDI Terminals • • • • • • • • • • • • • • • • • • • • • • • • • • •

The PSR-262 also features MIDI terminals, allowing you to interface the PSR­262 with other MIDI instruments and devices. (For more information, see page

52.)

Music Stand

Insert the bottom edge of the included music stand into
the slot located at the top rear of the PSR-262 control
panel.

9

Quick
Guide

Step 1

●

Voices

w

000

GrandPno

116

TEMPO

zwzqq

Playing the Piano

Simply by pressing the [Piano] button, you can automatically reset the entire PSR-262 for piano play.

z

Press the [Piano] button.

z

Playing along with the Metronome

Press the [METRONOME] button.

x

Play the keyboard.

Panel Voice List

Voice Name

No.

PIANO

001 GRAND PIANO
002 HONKY-TONK
003 E PIANO 1
004 E PIANO 2
005 E PIANO 3
006 E PIANO 4
007 HARPSICHORD
008 CLAVI
009 CELESTA

ORGAN

010 VIBRATO OFF

000

Want to find out more? See page 20.

No.

011 VIBRATO ON
012 HARMONY OFF
013 HARMONY ON
014 ATTACK OFF
015 ATTACK ON
016 WAVE OFF
017 WAVE ON
018 PIPE ORGAN
019 ACCORDION
020 HARMONICA

021 SOFT GUITAR

GrandPno

Voice Name

GUITAR/BASS

No.

022 FOLK GUITAR
023 12ST GUITAR
024 JAZZ GUITAR
025 E GUITAR
026 DIST GUITAR
027 WOOD BASS
028 FINGER BASS
029 SLAP BASS

STRINGS/MALLET

030 STRINGS
031 VIOLIN
032 CELLO

Voice Name

Want to find out more? See page 21.

Voice Name

No.

033 HARP
034 SITAR
035 BANJO
036 VIBRAPHONE
037 MARIMBA
038 STEEL DRUMS

039 TRUMPET
040 TROMBONE
041 MUTE TRPET
042 FRENCH HORN
043 BRASS SECT

WIND

Voice Name

No.

044 ALTO SAX
045 TENOR SAX
046 OBOE
047 CLARINET
048 FLUTE
049 PAN FLUTE

SYNTHESIZER

050 THICK LEAD
051 SIMPLE LEAD
052 THICK SAW
053 SIMPLE SAW
054 SYNTH BASS

10

Selecting and Playing Other Voices

The PSR-262 has a total of 100 dynamic and realistic instrument voices. Let’s try a few of them out now...

q

Press the [VOICE] button.

w

Select a voice.

Step 1 Voices

HnkyTonk

000

GrandPno

TEMPO

116

e

Play the keyboard.

002

Want to find out more? See page 23.

Playing with the DJ Feature

The exciting new DJ feature giv es you a full v ariety of dance and DJ sounds — letting you create your o wn real-time mix es and
groove along with various contemporary rhythms.

q

Press the [DJ] button.

098

DJvoice1

e

Play the DJ GAME voice.

w

Press the Lesson [L] or [R] button.

Voice Name

No.

055 SY STRINGS
056 SY BRASS
057 SLOW STRS
058 CHORUS

HARMONY

059 PIANO TRIO
060 PNO COUNTRY
061 E PNO TRIO
062 HARPSI TRIO
063 E ORG TRIO
064 VIBES DUET
065 TRP DUET

Voice Name

No.

066 HORN DUET
067 CLARINET TR
068 FLUTE DUET

069 WD BASS/PNO
070 STRINGS/PNO
071 FN BA/E PNO
072 HARP/VIOLIN
073 HORN/TRP

074 SUS PIANO
075 SUS E PNO1

SPLIT

SUSTAIN

Voice Name

No.

076 SUS E PNO2
077 SUS VIBRAPHONE
078 SUS STRINGS

079 PIANO
080 E PIANO
081 HARPSICHORD
082 CELESTA
083 FOLK GUITAR
084 BANJO
085 VIBRAPHONE
086 MARIMBA

ECHO

Want to find out more? See page 22.

Voice Name

No.

087 STEEL DRUMS
088 DRUM KIT

089 PNO CONCE
090 E PNO CONCE
091 FAIRY LAND
092 MOOD GUITAR
093 RICH GUITAR
094 HOT ORGAN
095 EXCEL VIOLIN
096 CRYSTAL
097 STAR SHIP

DUAL

Voice Name

No.

DJ Voice

098 DJ VOICE 1
099 DJ VOICE 2

DRUMS

100 DRUM KIT

11

Quick
Guide

Step 2

Songs

000

GrandPno

116

TEMPO

xc z

Playing the Songs

The PSR-262 is packed with 100 songs, including 5 special Demo songs.

zxq

xw

Playing the Demo songs

Demo songs (001 - 005) showcase the sophisticated fea­tures and stunning sound of the PSR-262. Let’s play the
Demo songs now, starting with 001...

z

Press the [DEMO] button.

Livin'La

x

Stop the Demo song.

or

001

Playing a single song

Naturally, you can also individually select and play back
any of the PSR-262’s songs (001 - 100).

z

Press the [SONG] button.

001

x

Select a song.

c

Start (and stop) the song.

Livin'La

002

Virtual

12

Want to find out more? See page 29.

Changing the volume of the song

This lets you adjust the volume balance between the song
and your keyboard performance.

q

Press the [OVERALL] b utton, until A CMP/SONG
VOLUME is indicated by the dark arrow in the
display.

110

w

Use the [+]/[-] buttons to adjust the song vol­ume.

You can also use the numeric keypad to directly enter
the value.

SONG VOL

MEASURE

-04

120

Want to find out more? See page 32.

SONG VOL

Song List

No. Song Name

001 Livin’ La Vida Loca
002 Virtual Insanity
003 I Just Called To Say I

004 Dancing Queen
005 Top Of The World

006 Für Elise
007 Menuett
008 Turkish March
009 Marcia Alla Turca
010 Valse op.64-1 “Petit

011 Etude op.10-3 “Chanson

012 Jesu, Joy Of Man’s Desir-

013 Symphonie Nr.9
014 Gavotte
015 Fröhlicher Landmann
016 Polonaise
017 Canon
018 Heidenröslein
019 Träumerei
020 From The New World
021 Frühlingslied
022 Menuett
023 Liebesträume Nr.3
024 Blumenlied
025 Valse Des Fleurs (From

026 Air On The G String
027 Die Forelle
028 Marche (From “The Nut-

029 Humoreske
030 Pizzicato Polka
031 Ave Maria
032 Ave Maria
033 Wiegenlied
034 Wiegenlied
035 Wiegenlied

036 Twinkle Twinkle Little

037 Grandfather’s Clock
038 Beautiful Dreamer
039 Greensleeves
040 Believe Me, If All Those

041 I’m Mai
042 Home Sweet Home
043 Amazing Grace
044 Aura Lee
045 My Old Kentucky Home
046 Aloha Oe
047 Die Lorelei
048 Londonderry Air

Demo

Love You

Piano/Classic

chien”

De L’adieu”

ing

“The Nutcracker”)

cracker”)

World

Star

Endearing Young
Charms

Step 2 Songs

No. Song Name

049 Auld Lang Syne
050 Carry Me Back To Old

Virginny

051

The Yellow Rose Of Tex-

as
052 Long, Long Ago
053 London Bridge
054 Old Folks At Home
055 O Du Lieber Augustin
056 My Darling Clementine
057 Hamabe No Uta
058 Furusato
059 Oh! Susanna
060 Jeanie With The Light

Brown Hair
061 I've Been Working On

The Railroad
062 Loch Lomond
063 My Bonnie
064 Yankee Doodle
065 Turkey In The Straw
066 Annie Laurie
067 Close Your Hands,Open

Your Hands
068 Muss I Denn
069 The Cuckoo
070 Battle Hymn Of The Re-

public
071 Camptown Races
072 Romance De L’amour
073 American Patrol
074 Little Brown Jug
075 The Entertainer

076 Jingle Bells
077 Silent Night
078 Joy To The World
079 O Christmas Tree
080 Deck The Halls

081 Euro Techno
082 Flares
083 Grind
084 Acid House
085 Pop Reggae
086 Ragga
087 Shakin’
088 Digital Rock
089 SupaBad
090 Ambient
091 Acid Techno
092 Soulful
093 Drums & Bass 1
094 Drums & Bass 2
095 Hard Step 8th
096 Funky Trip Hop
097 Hype
098 Beatbox
099 Funked Up
100 All That

Christmas

DJ Game

●

13

Quick

Accompaniment

section

Left hand

Auto accompaniment

(for example,
bass + guitar + drums)

Right hand
Melody

+

Guide

Step 3 Auto Accompaniment

zb

c v m n

Using the Auto Accompaniment

000

z

GrandPno

116

x

TEMPO

The powerful yet easy-to-use Auto Accompaniment features give
you professional instrumental backing for your performances. Sim­ply play chords with your left hand — and the PSR-262 automati­cally produces appropriate bass, chord and rhythm backing. Use
your right hand to play melodies, and you’ll sound like an entire
band!

• For more infomation on playing proper chords for the auto accompa­niment, see “Using Auto Accompaniment — Multi Fingering” on page
48 and “Looking up Chords in the Dictionary” on page 41.

z

Press the [STYLE] button.

001

8Bt Pop

TEMPO

116

x

Select a style.

c

Turn the auto accompaniment on.

002

8UpTempo

14

Step 3 Auto Accompaniment

Looking up Chords in the Dictionary

The convenient Dictionary function teaches you how to play chords by showing you the individual notes. In the example
below, we’ll learn how to play a GM7 chord...

c

Keys for entering

the chord type (C3 — B4)

Learning how to play a specific chord

Example:

Root note Chord type

z

Press the [Dict.] button.

Keys for entering

the chord root (C5 — B5)

GM7

Specify the chord type of the chord (in this
case, M7).

7M

v

Play the notes of the chord as indicated in the
keyboard diagram in the display. The chord
name flashes when the chord is played prop­erly.

ACMP

ON

7M

Accompaniment

section

Dict.

x

Specify the root note of the chord (in this case,
G).

v

Turn the Sync Start function on.

b

Play a chord with your left hand.

The auto accompaniment
starts as soon as you play the

Accompaniment

section

keyboard. For more on
chords, see “Looking up
Chords in the Dictionary”
above.

b

To leave the Dictionary function, press the
[Dict.] button again.

Want to find out more? See page 41.

n

Select a section.

The auto accompaniment has four sections: Intro,
Main A/B, and Ending.

m

Stop the auto accompaniment.

Want to find out more? See page 43.

7M

15

Quick
Guide

Step 4 Lesson

x

000

GrandPno

116

TEMPO

zxzv

Using the Lesson Feature

All of the PSR-262’s songs can be used with the educational Lesson feature. Lesson makes it fun and easy to master these
songs. You can practice the left- and right-hand parts of each song individually: simply press the appropriate button, [L] (left)
or [R] (right). The practice steps below apply to either hand.

Lesson 1 — Timing. . . . . . . . .This lesson step lets you practice just the timing of the notes.

Lesson 2 — Waiting . . . . . . . .In this lesson step, the PSR-262 waits for you to play the correct notes before continuing

playback of the song.

Lesson 3 — Minus One . . . . .This lesson step plays back the song with one part muted — letting you play and master the

missing part yourself.

Lesson 4 — Both Hands. . . . .This lesson step is the same as “Minus One,” except in that both the left- and right-hand

parts are muted — letting you play and master both hands.

16

z

Select one of the Lesson songs.

For instructions on selecting songs, see page 29.

x

Select the part you wish to work on (left or
right) and the Lesson step.

If you want to work on the right-hand part, press the
[R] button; to work on the left, press the [L] button.

r1

• Each press of the corresponding button ([L] or [R]) alternately selects
Lessons 1 - 3. Pressing both buttons simultaneously calls up Lesson
4, Both Hands.

Timing

c

Start the Lesson.

v

When you’re finished, stop the Lesson.

• You can also exit from the Lesson by pressing one of the LESSON
buttons ([L] or [R]) repeatedly until “OFF” is shown in the display.

Step 4 Lesson

Lesson 1 — Timing

This step lets you work on the timing of the notes. In Les­son 1, the particular note you play on the keyboard is
unimportant. The PSR-262 checks your timing and how
rhythmically “tight” your playing is.

r1

Want to find out more? See page 36.

Timing

Lesson 2 — Waiting

In Lesson 2, you practice playing the notes correctly as
they appear in the display notation. The accompaniment
pauses and waits for you to play the notes correctly before
it continues.

r2

Waiting

Grade

The PSR-262 has a built-in evaluation function that moni­tors your practicing and — like a real teacher — tells you
how well you did each exercise. F our grades are assigned,
depending on your performance: “OK,” “Good,” “Very
Good,” and “Excellent.”

Want to find out more? See page 39.

Talking

This feature “talks” to you through the speakers,
“announcing” the Grade comments as well as the titles of
the Lesson steps.

Want to find out more? See page 40.

Changing the Tempo

Naturally, you can change the tempo (speed) of the song
to your liking, letting you slow down difficult passages
and bring up the tempo gradually until you master them at
normal speed.

Want to find out more? See page 37.

Lesson 3 — Minus One

In Lesson 3, one of the parts is muted, and you practice
the missing part in time with the rhythm.

r3

Want to find out more? See page 37.

MinusOne

Lesson 4 — Both Hands

Lesson 4 is just like Lesson 3, except that the parts for
both hands are muted, letting you practice the missing
parts in time with the rhythm.

Lr4

BothHand

z

Press the [TEMPO/TAP] button.

116

x

Use the numeric keypad to set the desired
tempo.

• The PSR-262 also has a convenient Tap Tempo function that allows
you to “tap” a new tempo in real time. (See page 44.)

TEMPO

Want to find out more? See page 38.

17

-

Getting Started — Playing the Demo Songs

The PSR-262 has a variety of Demo songs, specially recorded to showcase the dynamic
sounds and rhythms and give you an idea of what you can do with the instrument.

First, turn on the power.

1

Press the [STANDBY/ON] button.

Set the Volume.

2

Initially , turn the [MASTER VOLUME] control about a third of the w ay up.
You can adjust the control for optimum level once the songs start playing.

Press the [DEMO] button.

3

All five songs will play back in sequence. You can play along on the key­board with the songs.

The current song name and number appear at the left of the display. Notice
also that the display indicates both the chords and the melody notes (in the
music staves and the keyboard diagram) as they change during the song.

To stop playback, press the [START/STOP] button.

Song number

Current chord

While the Demo song is playing...

Many features of the PSR-262 can be used while the Demo songs are playing. These include:

• Tempo (page 31)

• Song volume (page 32)

• Tuning (page 27)

• Pause, Rewind, Fast Forward (page 32)

001

8va

m

7

Livin'La

MEASURE

002

Song name
Melody notation

Keyboard diagram
(current note is dark)

• The PSR-262 has a Demo Can­cel function that allows you to dis
able the Demo feature. To use
this, simultaneously hold down
the [DEMO] button and turn the
power on ([STANDBY/ON] but­ton). While the power is on in this
condition, pressing the [DEMO]
button has no effect. To turn
Demo Cancel off, simply turn the
power off and back on again nor­mally.

18

• For a few specific chords (such as BM7), not all notes may be shown
in the notation section of the display. This is due to space limitations
in the display.

Panel Display Indications

The PSR-262 features a large multi-function display that shows all important settings for the
instrument. The section below briefly explains the various icons and indications in the display.

w Overall function bar

indicator

002

y Chord

Indicator

q

These bars indicate the operating condition of the
PSR-262, as shown below:

u Song/Voice/Style name

and number

q Indicators

Virtual

e Notation

MEASURE

003

t Measure/Tempo

and Beat

r Keyboard

and auto accompaniment are active, the display also
shows the specific notes of the current chord.
The indication “8va” appears at the
lower or upper part of the notation
staff for a note or notes that are
respectively an octave lower or
higher than notated.

003

8va

Using the numeric keypad
selects voice numbers.
Pressing the [START/
STOP] button starts song
playback.

Using the numeric keypad
selects voice numbers.
Pressing the [START/
STOP] button starts style
playback.

w

Overall function bar indicator

Using the numeric keypad
selects song numbers.
Pressing the [START/
STOP] button starts song
playback.

Using the numeric keypad
selects style numbers.
Pressing the [START/
STOP] button starts style
playback.

The PSR-262 has seven Overall functions or controls.
The currently selected function is indicated by a dark
bar that appears next to its name (printed on the
panel).

e

Notation /

r

Keyboard

These two portions of the display conveniently indi­cate notes currently played on the keyboard. When a
song is being played back, they show the single notes
of the melody in succession. When the Style mode

Measure/Tempo and beat

t

This shows either the current measure (when the Song
mode is selected) or the current Tempo value (when
the Style mode is selected). The hand clap icons also
flash to indicate the beats in the measure during song
or style playback. (See page 31.)

y

Chord

When a song is being played back, this indicates the
current chord root and type. It also indicates chords
played in the ACMP section of the keyboard when the
Style mode and auto accompaniment are on.

Song/Voice/Style name and number

u

This portion of the display indicates the name and
number of the currently selected song, voice, or style.
When other functions of the PSR-262 are selected, it
briefly shows the function name and current value or
setting.

19

Portable Grand

This convenient function lets you instantly call up the Grand Piano voice.

Playing the Portable Grand

Press the piano-shaped [Piano] button.

Doing this automatically cancels any other mode or function, and resets the entire
instrument for playing the special “Stereo Sampled Piano” Grand Piano voice. It
automatically selects the Song mode, calling up song #006, “Für Elise” — which
can be played instantly by pressing the [START/STOP] button.

The Portable grand setting is designed also for playing with the special Pianist
styles (#081 - #100). When auto accompaniment is turned on, these provide
piano-only accompaniment in a variety of music styles.

Using the Metronome

1

Call up the Tempo setting.

Press the [TEMPO/TAP] button.

Current Tempo value

136

TEMPO

MEASURE

001

• When the [Piano] button is
pressed, One Touch Setting
(page 26) is automatically turned
on, and special Multi Pad sounds
for piano are automatically called
up as well. (For more on Multi
Pads, see page 51.)

20

2

Change the value.

Use the numeric keypad to set the desired Tempo value, or use the [+]/[-]
buttons to increase or decrease the value.

3

Turn on the Metronome.

Press the [METRONOME] button.

Portable Grand

1

To turn the Metronome off, press the [METRONOME] button again.

Setting the Metronome Time Signature

The time signature of the Metronome can be set to var­ious quarter-note based meters.

• The time signature changes automatically when a style or song is
selected.

Hold down the [METRONOME] button (until “TIME
SIG” appears in the display), then press the button on
the numeric keypad that corresponds to the desired
time signature (see chart at right).

Number.
button

1 1/4 — Plays only “1” beats (all high clicks)
2 2/4
3 3/4
4 4/4
5 5/4
6 6/4
7 7/4
8 8/4
9 9/4
0 Plays no “1” beats (all low clicks)

Time signature

4

Indicates the beat number in
the tempo/measure.

TIME SIG

Adjusting the Metronome Volume

You can adjust the volume of the Metronome sound independently of the other PSR-262 sounds. The v olume range
is 000 - 127.

1 Select the Metronome Volume function in the Overall menu.

Press the [OVERALL] b utton, repeatedly if necessary, until “MTR V OL” appears
in the display.

Current Metronome value

100

Indicates Metronome
Volume is selected

MTR VOL

TEMPO

116

2 Change the value.

Use the numeric keypad to set the desired Metronome Volume value, or use the
[+]/[-] buttons to increase or decrease the value.

Restoring the Default Met­ronome V olume V alue

To restore the default Metro­nome Volume value of “100,”
press both [+]/[-] buttons
simultaneously (when Metro­nome Volume is selected).

21

-

DJ

This exciting feature lets you instantl y call up a dynamic DJ voice, style and DJ GAME for play­ing contemporary dance music.

Playing the DJ

1

Press the [DJ] button.

098

DJvoice1

Doing this automatically resets the entire instrument for playing the spe­cially programmed DJ song and voice.

2

Turn on the Lesson feature, and select a Lesson step.

Lesson steps 1 - 3 can be used with DJ play. Press either the [L] or [R] but­ton, repeatedly if necessary, until the desired Lesson step is called up.

The DJ voice is divided into “blocks” (as shown below). Each block has a
different sound.

Block #1

Block #2 Block #3 Block #4

For Lesson 1, any note on the keyboard can be played. For the other Lesson
steps, play the appropriate octave block.

Once the song starts playing and the DJ “teacher” says “Go,” play the appro­priate block as indicated in the display. (When Talking is on, the blocks are
also “announced” in Lesson 2.)

MEASURE

001

• If two sixteenth notes are to be
played, the appropriate block
numbers appear successively at
the same position. If the same
block is to be played twice as six­teenth notes, an equal sign
appears after the block number
(as shown below).

Indicates that the

31

3=

third block and first
block are to be
played as succe­sive sixteenth notes.

Indicates that the
third block is to be
played as two six­teenth notes.

22

r1

132 33

Block number

When the DJ “teacher” is playing, the block numbers appear in the display
one after another according to the rhythm.

3

Press the [START/STOP] button to stop the song.

• Since there are no left or right
parts in the DJ song, the [L] and
[R] buttons can be used inter­changeably. Also for the same
reason, Lesson 3 and Lesson 4
are identical.

• In the DJ Lesson, you can play
the Multi Pads as well as the key
board.

• Try playing one of the special DJ
voices (#098, #099) with the DJ
song. (See page 24.)

Selecting and Playing Voices

The PSR-262 features 100 authentic voices that have been created with Y amaha ’s sophisticated
AWM (Advanced Wave Memory) tone generation system. Many of these voices also have spe­cial preset characteristics or embellishments. The voices are divided into various categories
depending on their characteristics or the effects used.

Selecting and Playing a Voice

1 Press the [VOICE] button.

Voice name and number

000

GrandPno

2 Select the desired voice number.

Use the numeric keypad. The basic categories of voices and their numbers
are shown on the panel.

TEMPO

116

There are two ways to select voices: 1) directly entering the voice number
with the numeric keypad, or 2) using the [+]/[-] buttons to step up and down
through the voices.

23

Selecting and Playing Voices

■ Using the numeric keypad

Enter the digits of the voice number as printed on the panel. For example, to
select voice #042, press “0” on the numeric keypad, then “4.”, “2.” For voice
numbers beginning with zeroes (such as #042 or #006), the initial zeroes
may be omitted.

042

Fr.Horn

TEMPO

116

■ Using the [+]/[-] buttons

Press the [+] button to select the next voice number, and press the [-] button
to select the previous voice. Holding down either key continuously scrolls
up or down through the numbers.

• Each voice is automatically
called up with the most suitable
octave range setting. Thus, play­ing middle C with one voice may
sound higher or lower than
another voice at the same key.

• Four of the Organ voices are
effect “pairs.” Switching between
each of the paired voices (with
the [+]/[-] buttons) turns the effect
of the voice on or off. For exam­ple, for the Vibr ato pair (#010 and
#011), selecting #010 turns the
vibrato effect off, while selecting
#011 turns vibrato on. The same
applies to the Harmony, Attack
and Wave voices (#012 - #017).

3 Play the selected voice.

24

• The PSR-262 is polyphonic up to
a maximum of 16 notes.
(Depending on the voice selected
— such as split voices and dual
voices — fewer notes may be
available.) This includes not only
the notes played from the key­board, but also the notes in a
style pattern, the notes played by
a Pad (page 51), and so on.
Thus, if you play too many notes
at one time, some may not sound
and/or others may be cancelled.

Selecting and Playing Voices

Harmony voices (#059 - #068) automatically add a one-, two- or three-note har­mony to the original voice. Split voices (#069 - #073) feature two separate
voices, each playable from opposite sections of the keyboard — the lower voice
playable up to B2 and the upper voice from C3 (middle C). Sustain voices (#074

- #078) have a special sustained release for playing slower or legato passages.
Echo voices (#079 - #088) provide an echo effect that adds delayed repeats to the
original voice. Dual voices (#089 - #097) blend two voices together for a rich,
layered sound.

There’s even a dynamic set of DJ voices (#098 - #099) that provides a wealth of
exciting sounds for playing many of today’s popular music styles. The PSR-262
also features special Drum Kit voices — #088 (with Echo) and #100 — that let
you play a variety of drum and percussion sounds from the keyboard. (Refer to
the Drum Kit Voice Chart below.) Icons representing each sound are printed
above the keyboard, conveniently indicating which sounds are played from which
keys.

About the Harmony voices

• Since Harmony voices are
designed to automatically play
two or more notes with the notes
you play on the keyboard, only
one note can be played on the
keyboard at a time. If several
notes are played together, only
the last note or highest note
played will be used for the har­mony effect.

DJ Voice Chart (voices #098 and #099)

• #098

Scratch
(C1-B2)

Uhh+Hit

One

One More Time

Ohh 2

Two

Ohh 1

Three

Yo-Kurt

Four

Whew!

Huh!

Turntable

Ok

Off

Signal

• #099

Electronic Bass

(C1-B2)

Orchestra Hit

(C3-F 3)

Electronic Bass Drum B

Electronic Bass Drum C

Electronic Snare Drum B

Reverse Pluse

Electronic Snare Drum A

Drum Kit Voice Chart (voices #088 and #100)

Reverse

Lesson

Omen-FX

DJ!

FMTB2

Pinpon

BLJ Tril

FMTB1

Good

Electronic Strings

Yeah...

(C4-C6)

Uhh

Very Good

Excellent

Go!!

Dictionary

GetUp!

Come On 2

Hand Clap

Come On 1

Bell Tree

Scratch (L)

Scratch (H)

Rim Shot

Bass Drum 1

Bass Drum 2

Hi-hat Close

Snare Drum 1

Hi-hat Pedal

Snare Drum 2

Hi-hat Open

Tom Bass

Tom Low

Crash Cymbal

Tom Mid

Splash Cymbal

Tom High

SynthBass Drum

Cowbell

SynthSnare Drum

Claves

Synth Tom Bass

Shaker

Synth Tom Low

Synth Tom Mid

Timbale H

Synth Tom High

Timbale L

Agogo H

Agogo L

Conga H Mute

Bongo H

Conga H Open

Bongo L

Conga L

Guiro Short

Guiro Long

25

Selecting and Playing Voices

One Touch Setting

The powerful One Touch Setting (OTS) feature lets you instantly and automati­cally call up an appropriate voice and other settings when you select a style or
song. In other words, when One Touch Setting is active, selecting a desired style
or song also automatically selects the best suited voice and Multi Pad bank.

1 Press the [VOICE] button.

000

2 Select the One Touch Setting voice (#000).

Use the numeric keypad or [+]/[-] buttons.

000

To turn One Touch Setting off, select a voice other than #000.

GrandPno

GrandPno

TEMPO

116

TEMPO

116

26

Selecting and Playing Voices

-

-

Transpose and Tuning

You can also adjust the tuning and change the transposition (key) of the PSR-262
with the Transpose and Tuning functions.

■ Transpose • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Transpose determines the key of both the main voice and the bass/chord accompa­niment of the selected style. It also determines the pitch of the songs and the
Multi Pads. This allows you to easily match the pitch of the PSR-262 to other
instruments or singers, or play in a different key without changing your fingering.
The Transpose settings can be adjusted over a range of ± 12 semitones (± 1
octave).

1 Select the Transpose function in the Overall menu.

Press the [OVERALL] button, repeatedly if necessary, until “TRANSPOS”
appears in the display.

Current Transpose value

00

Indicates Transpose is selected

TRANSPOS

TEMPO

116

2 Change the value.

Use the numeric keypad to set the desired Transpose value (-12 - +12). To
transpose the pitch down, simultaneously press the [-] button and use the
numeric keypad to type in the (negative) value. You can also use the [+]/[-]
buttons to increase or decrease the value. Holding down either button con­tinuously increases or decreases the value.

■ Tuning • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Tuning determines the fine pitch setting of both the main v oice and the bass/chord
accompaniment of the selected style. It also determines the pitch of the songs and
the Multi Pads. This allows you to accurately match the tuning with that of other
instruments. The Tuning settings can be adjusted over a range of ± 50 (approx. ±

0.5 semitones).

Restoring the Default Trans­pose Value

If you’ve changed the Transpose
setting, you can instantly restore
the default setting of “00” by press­ing both [+]/[-] buttons simulta­neously (when Transpose is
selected).

• Transpose has no effect on
voices #088 (Echo Drum Kit),
#098 and #099 (DJ), or #100
(Drum Kit). Also, this setting can
not be changed during song play
back.

1 Select the Tuning function in the Overall menu.

Press the [OVERALL] button, repeatedly if necessary, until “TUNING”
appears in the display.

Current Tuning value

00

Indicates Tuning is
selected

TUNING

TEMPO

116

27

Selecting and Playing Voices

-

2 Change the value.

Use the numeric keypad to set the desired Tuning value (-50 - +50). To tune
the pitch down, simultaneously press the [-] button and use the numeric key­pad to type in the (negative) value. You can also use the [+]/[-] buttons to
increase or decrease the value. Holding down either button continuously
increases or decreases the value.

Touch Response

The PSR-262 features a Touch Response function that gives you dynamic, e xpres­sive control over the volume of the voices. The Touch Sensitivity parameter lets
you set the degree of Touch Response.

To turn on Touch Response, press the [TOUCH] button.

on

TOUCH

Restoring the Default Tuning
Value

If you’ve changed the Tuning set­ting, you can instantly restore the
default setting of “00” by pressing
both [+]/[-] buttons simultaneously
(when Tuning is selected).

■ Changing the Touch Sensitivity Value • • • • • • • • • • • • • • • • • •

Press and hold down the [TOUCH] button, then press the appropriate num­bered button on the numeric keypad: 1, 2, or 3.

2

Settings:

1 (Soft) This results in limited touch response, and produces a relatively narrow

dynamic range, no matter how lightly or strongly you play the keys.

2 (Medium) This lets you play over a normal dynamic range (soft to loud).
3 (Hard) This is designed for playing very soft passages, giving you slightly more

detailed control in the soft volume range.

When Touch is turned off, a constant volume (corresponding to a velocity
value of 80) is produced.

Medium

Restoring the Default Touch
Sensitivity Value

The default Touch Sensitivity is 2
(Medium). To restore the default
value, press both [+]/[-] buttons
simultaneously (when Touch Sensi
tivity is selected).

28

Selecting and Playing Songs

The Song mode features 100 special songs that have been created using the rich and dynamic
sounds of the PSR-262.

The songs are generally for your listening enjoyment; however, you can also play
along with them on the keyboard. The songs of the PSR-262 can also be used
with the powerful Lesson feature (page 34), a con v enient tool that makes learning
songs fun and easy.

Selecting and Playing a Song

1 Press the [SONG] button.

Song name and number

001

Livin'La

2 Select the desired song number.

Use the numeric keypad. The basic categories of songs and their numbers
are shown at the left of the panel.

Song numbers can be selected in the same way as with the voices (see page

24). You can use the numeric keypad to directly enter the song number, or
use the [+]/[-] buttons to step up and down through the songs.

MEASURE

-04

3 Start the selected song.

Press the [START/STOP] button. As the song plays back, the measure num­ber, chords and melody notes are shown in the display.

Current measure number

001

8va

m

7

Livin'La

MEASURE

002

Current melody note

• You can play along with the song
using the currently selected
voice, or even select a different
voice for playing along. Simply
press the [VOICE] button while
the song is playing back and
select the desired voice. There’s
also a Melody Voice Change
function (below) that lets you
change the song’s melody voice
to the one currently selected
voice.

• The PSR-262 also has a conve­nient T ap Tempo function that
allows you to "tap" a new tempo
in real time. (See page 44.)

29

Selecting and Playing Songs

4 Stop the song.

Press the [START/STOP] button.

Melody Voice Change

The PSR-262 lets you play a melody on the keyboard along with each of the
songs, either with the original melody voice or one of your own selection. The
convenient Melody Voice Change feature takes this one step further — it lets you
replace the original voice used for the melody of the song with the panel voice of
your own selection. For example, if the current voice selected on the panel is
piano but the song’s melody is being played by a flute voice, using Melody Voice
Change will change the flute melody voice to piano.

1 Select the desired song.

Press the [SONG] button, then use the numeric keypad or [+]/[-] buttons to
select the desired song.

002

2 Select the desired voice.

Press the [VOICE] button, then use the numeric keypad or [+]/[-] buttons to
select the desired voice.

001

3 Press and hold down the [VOICE] button for at least one

second.

“MELODY VOICE CHANGE” appears in the display, indicating that the
selected panel voice has replaced the song’s original melody voice.

Virtual

MEASURE

-04

GrandPno

MEASURE

-04

30

001

MELODY V

MEASURE

-04

Selecting and Playing Songs

-

Changing the Tempo

The tempo of song playback can be adjusted over a range of 40 - 240 bpm (beats
per minute).

1 Press the [TEMPO/TAP] button.

Current Tempo value

120

TEMPO

MEASURE

2 Change the value.

Use the numeric keypad to set the desired Tempo value, or use the [+]/[-]
buttons to increase or decrease the value.

The PSR-262 also has a convenient Tap Tempo function that allows you to
“tap” a new tempo in real time. (See page 44.)

-04

Restoring the Default Tempo
Value

Each song and style has been
given a default or standard Tempo
setting. You can instantly restore
this default Tempo setting by press
ing both [+]/[-] buttons simulta­neously (when Tempo is selected).

Also, the tempo of a song or style
returns to the default setting when
selecting a different song or style.
(The set tempo remains, however,
when switching styles during play­back except when OTS is on.)
When you turn on the power of the
PSR-262, the tempo is automati­cally set to 116 bpm.

About the Beat Display

URE

002

This section of the display provides a convenient, easy­to-understand indication of the rhythm — for song and
style playback. The flashing “handclap” icons indicate
both the downbeats and upbeats of a measure as fol­lows:

Indicates the first beat of the mea­sure (downbeat)

Indicates an upbeat

Indicates a downbeat (other than
the first beat)

31

Selecting and Playing Songs

Adjusting the Song Volume

The playback volume of the song can be adjusted. This volume control affects
only the song volume. The volume range is 000 - 127.

1 Select the Song Volume function in the Overall menu.

Press the [OVERALL] button, repeatedly if necessary, until “SONG VOL”
appears in the display.

Current Song Volume value

110

Indicates Song Volume is
selected

SONG VOL

MEASURE

2 Change the value.

Use the numeric keypad to set the desired Song Volume value (000 - 127).
You can also use the [+]/[-] buttons to increase or decrease the value. Hold­ing down either button continuously increases or decreases the value.

-04

Restoring the Default Song Vol­ume Value

If you’ve changed the Song Volume
setting, you can instantly restore
the default setting of “110” by
pressing both [+]/[-] buttons simul­taneously (when Song Volume is
selected).

Song Controls

The panel buttons below the display function as song controls.

Pressing this button alter­nately pauses and
resumes song playback.

This controls the A-B
Repeat function.
(See page 33.)

32

Pressing this button alter­nately starts and stops
song playback.

This functions as a fast-forward button, step­ping in advance through the measure numbers.
It can be used during playback (with sound), or
when playback is paused or stopped.

This functions as a rewind button, stepping
in reverse through the measure numbers.
It can be used during playback, or when
playback is paused or stopped.