MPB 840
OPERATION MANUAL (ENG)
Notes
Recycling of electronic devices
This product is designed and manufactured with high quality materials and components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their
end-of-life, should be disposed of separately from your household
waste.
Please, dispose of this equipment at your local community waste
collection/recycling centre. In the European Union there are separate collection
systems for used electrical and electronic product. Please, help us to conserve
the environment we live in!
English
Recycling of paper and carton
The material recycling symbol on the carton and user manual denotes that they are recyclable. Dispose them not with the normal
household waste.
Recycling of plastic parts
The material recycling symbol on the plastic parts denotes that they
are recyclable. Do not dispose them in household waste.
Green Dot
The “Grüne Punkt” denotes that the MAS Elektronik AG pays a duty to
the “Society for Waste Prevention and Secondary Resource Generation”.
Package lncludes
. XORO MPB 840
. 5 mobile phone connectors
. Instruction manual
. USB power wire
2 MPB 840
Technical Specifications
Capacity 8400mAh / 3.7V
Net weiqht
Size
Input
190g
95x62x20mm
DC5V/1A
Output 1 DC5V/1A
Output 2 DC5V/2A
Output 1 charging rate 1000mA / Stunde
Output 2 charging rate 2000mA / Stunde
Identification of Parts
1. Micro USB input port
2. 1A USB output port
3. 2A USB output poft
4. LED flashlight
5. Power button
6. LED indicator
1. LED flashlighe Press the power button for 2 seconds to turn the light on / off.
The LED flashlight can last over 380 hours with a full charge.
2. LED indicator: Press the power button once to trigger the LED indicators and
reveal the remaining power state.
English
LED indicator One light on Two lights on Three lights on Four lights on
Remainig
Power
< 25%
< 2100mAh
25% - 50%
2100 4200mAh
MPB 840 3
50% - 75%
4200 6300mAh
75% - 100%
6300 - 8400mAh
How to Charge Your MPB 840
1 Atach the Micro USB connectorto the USB power wire.
2. Plug the Micro USB connector into the MPB 840's
Micro USB input port.
3. Insert the remaining end of the USB power wire into (a) an AC adapter (not included)
connected to the wall socket or (b) a charging computer USB port.
English
XORO MPB 840 is fully compatible with all AC
adapters. A USB AC adapter with 1A or more output current will maximize charging
speed. Lower currents will prolong charge time. For example, a 500mA adapter will
charge the MPB 840 twice as slowly as a 1A adapter.
Wie man mit dem MPB 840 andere Geräte auflädt
The MPB 840 is suitable to charge
all DC-5V input devices. The
various connectors provided are
compatible with major types of
mob.le phones and digital devices.
1. Plug the USB powerwire to the MPB 840
USB output port.
2. Attach the remaining end of
the USB power wire with the appropriate
connector.
3. lnsert the connedor to your device.
4. Press the power button to begin charging your device.
4 MPB 840
MPB 840 Indicator lnstructions
Press the power button once to trigger the LED indicators and reveal the remaining power
state. The number of lit LED
indicators reflects the remaining power state:
. The LED lights will turn off when the device is fully charged.
. The LED lights will light for 10 seconds when it starts to charge another device.
. The LED lights will remain unlit when the battery is empty.
Note
1. To protect the long-term capacity of your device's battery, we recommend you unplug
the power wire promptly after the device is fully charged.
2. During the charging process, the MPB 840 will consume about 30% of total capacity,
including power loss from circurt heat and voltage conversion.
3. Since the combined output of both po.s is limited to 2A, concurrent use of the two pods
will make the charg.ng speed twice as slow,
4. Many mobile internet devices such as the iPad charge at 2A. Please refer to your
device's manual to identify the ideal Amps / charging port.
5. The optional film on the mirrored front surface is provided to protect your device from
scratches. Feel free to peel it off according to your preference.
FAQ & Solution
If the MPB 840 fails to charge:
A Check that the adapter connection is secure.
B Replace the adapter if the current adapter does not fundion normally.
If the MPB 840 fails to charge other eleatronic devices:
A. Check that the connection between the MPB 840 and the electronic device is secure.
B. Check that the MPB 840 still holds a charge, and recharge when remaining power is
low.
C Check that the MPB 840 voltage is compatible wíth the electronic devrce's required
charqe.
English
MPB 840 5
Limited Warranty
In case the products delivered are not free from defects in material
or workmanship, MAS Elektronik AG has the right to either repair or
replace the defective product at its choice. MAS Elektronik AG
manufactures and repairs goods using components which are new
or equivalent to new in accordance with industry standards and
practice. The warranty for wearing parts (e.g. rechargeable batteries) is limited to 6 months.
In case the device is equipped with internal data storage (e.g. hard disc drive, Flash drive), the
customer is responsible to backup his data before sending the device. MAS Elektronik AG is not
liable for any data loss on returned devices. MAS Elektronik AG reserves the right to reset returned devices to factory defaults. Please note your personal settings for this reason.
MAS Elektronik AG is not liable for any accessories not belonging to original package content
English
such as DVDs, hard disc drives, Flash storage devices, batteries, etc.
This limited warranty covers the warranty requirements set by authorities in your country.
This limited warranty only is valid in the co This limited warranty does not cover finishes, accesso-
ries or batteries, nor does it cover damage resulting from accident, misuse, abuse, dirt, water,
battery leakage, tampering, servicing performed or attempted by unauthorized service agencies.
This limited warranty does not cover damages resulting from firmware upgrades. Only in case of
firmware upgrades needed to add functions promised at time of purchase, such damages are
covered by this limited warranty.
For a correct and frictionless completion of warranty or repairs you need a RMA No. You may
obtain a RMA on the internet at www.mas.de/FAQ or by telephone.
Please send the device in its original packing material, all standard accessories and a copy of the
invoice, a description of defect and the RMA No. to following address. Please note the RMA number clear and in large numbers on the outer package.
MAS Elektronik AG
Weidegrund 3
21614 Buxtehude
Germany
Support
e-mail: support@ersservice.de
Hotline: +49 (0) 40 - 77 11 09 - 17
6 MPB 840
Loading...