WTE PF5002, PF5004, PF5006, PF5008, PF5010 Datasheet

				W T E	PF5000 – PF5010
			PO WE R SEM IC O ND U C TO RS
					50A 1/2" PRESS-FIT DIODE

Features

!Diffused Junction

!Low Leakage

!Low Cost

!High Surge Current Capability

!Typical IR less than 10µA

Mechanical Data

! Case: All Copper Case and Components

Hermetically Sealed

!Terminals: Contact Areas Readily Solderable

!Polarity: Cathode to Case(Reverse Units Are

	Available Upon Request and Are Designated	G
	By An “R” Suffix, i.e. PF5002R or PF5010R)
!	Polarity: Red Color Equals Standard,
	Black Color Equals Reverse Polarity
!	Mounting Position: Any

A

		DO-21
	Dim	Min	Max
	A	15.63	16.14
	B	12.75	12.83
	C	8.89	10.04
D	D	1.25	1.30
	E	3.05	3.30
C	F	5.59	6.1
	G	28.82	—
	All Dimensions in mm
	E

F

B

Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified

Single Phase, half wave, 60Hz, resistive or inductive load.

For capacitive load, derate current by 20%.

Characteristic		Symbol	PF5000	PF5001	PF5002	PF5004	PF5006	PF5008	PF5010	Unit
Peak Repetitive Reverse Voltage		VRRM
Working Peak Reverse Voltage		VRWM	50	100	200	400	600	800	1000	V
DC Blocking Voltage		VR
RMS Reverse Voltage		VR(RMS)	35	70	140	280	420	560	700	V
Average Rectified Output Current @TA = 150°C		IO				50				A
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave superimposed on		IFSM				500				A
rated load (JEDEC Method)
Forward Voltage	@IF = 100A	VFM				1.08				V
Peak Reverse Current	@TA = 25°C	IRM				10				µA
At Rated DC Blocking Voltage	@TA = 100°C					500
Typical Junction Capacitance (Note 1)		Cj				300				pF
Typical Thermal Resistance Junction to Case		R JC				1.2				K/W
(Note 2)
Operating and Storage Temperature Range		TJ, TSTG			-65 to +175					°C

*Glass passivated forms are available upon request

Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. 2. Thermal Resistance: Junction to case, single side cooled.

PF5000 – PF5010

1 of 2

© 2002 Won-Top Electronics