WTE
POWER SEMICONDUCTORS
PF2500 – PF2510
25A 1/2" PRESS-FIT DIODE
Features
!
Diffused Junction
!
Low Leakage
!
Low Cost A
!
High Surge Current Capability
!
Typical I
Mechanical Data
!
Case: All Copper Case and Components
Hermetically Sealed D
!
Terminals: Contact Areas Readily Solderable
!
Polarity: Cathode to Case(Reverse Units Are C
Available Upon Request and Are Designated G
By An “R” Suffix, i.e. PF2502R or PF2510R)
!
Polarity: Red Color Equals Standard, E
Black Color Equals Reverse Polarity
!
Mounting Position: Any F
R
less than 10µA
DO-21
Dim Min Max
A
15.63 16.14
B
12.75 12.83
C
8.89 10.04
D
1.25 1.30
E
3.05 3.30
F
5.59 6.1
G
28.82 —
All Dimensions in mm
B
Maximum Ratings and Electrical Characteristics
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic Symbol PF2500 PF2501 PF2502 PF2504 PF2506 PF2508 PF2510 Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage V
Average Rectified Output Current @TA = 150°C I
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave superimposed on
rated load (JEDEC Method)
Forward Voltage @IF = 50A V
Peak Reverse Current @TA = 25°C
At Rated DC Blocking Voltage @T
Typical Junction Capacitance (Note 1) C
Typical Thermal Resistance Junction to Case
(Note 2)
Operating and Storage Temperature Range TJ, T
= 100°C
A
RRM
V
RWM
V
R
V
R(RMS)
O
FSM
I
FM
RM
I
R
50 100 200 400 600 800 1000 V
35 70 140 280 420 560 700 V
j
JC
STG
@TA=25°C unless otherwise specified
25 A
400 A
1.08 V
10
500
300 pF
1.2 K/W
-65 to +175 °C
µA
*Glass passivated forms are available upon request
Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
2. Thermal Resistance: Junction to case, single side cooled.
PF2500 – PF2510 1 of 2 © 2002 Won-Top Electronics