WTE KBPC1010, KBPC1008W, KBPC1004, KBPC1002W, KBPC1004W Datasheet

				W T E	KBPC1000/W – KBPC1010/W
			PO WE R SEM IC O ND UC TO R S
					10A HIGH CURRENT BRIDGE RECTIFIER
Features

!

Diffused Junction

A

A

! Low Reverse Leakage Current

C

C

! Low Power Loss, High Efficiency

G

G

! Electrically Isolated Metal Case for

~

~

+

Maximum Heat Dissipation

D

+

C

C

! Case to Terminal Isolation Voltage 2500V

-

~

-

~

D

!

UL Recognized File # E157705

				H			H
	Mechanical Data					E			E
	! Case: Metal Case with Electrically					B			B
		Isolated Epoxy
	! Terminals: Plated Leads Solderable per				KBPC			KBPC-W
		MIL-STD-202, Method 208
	! Polarity: Symbols Marked on Case					KBPC		KBPC-W
	!	Mounting: Through Hole for #10 Screw			Dim	Min	Max	Min	Max
					A	28.40	28.70	28.40	28.70
	!	Weight:	KBPC	31.6 grams (approx.)
					B	10.97	11.23	10.97	11.23
			KBPC-W	28.5 grams (approx.)
					C	15.70	16.70	17.10	19.10
	!	Marking: Type Number			D	17.50	18.50	10.90	11.90
				"W” Suffix Designates Wire Leads	E	22.86	25.40	30.50	—
				No Suffix Designates Faston Terminals	G	Hole for #10 screw, 5.08Ø Nominal
					H	6.35 Typical		0.97Ø	1.07Ø
						All Dimension in mm

Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified

Single Phase, half wave, 60Hz, resistive or inductive load.

For capacitive load, derate current by 20%.

Characteristic		Symbol	KBPC	KBPC	KBPC	KBPC	KBPC	KBPC	KBPC	Unit
			1000/W	1001/W	1002/W	1004/W	1006/W	1008/W	1010/W
Peak Repetitive Reverse Voltage		VRRM
Working Peak Reverse Voltage		VRWM	50	100	200	400	600	800	1000	V
DC Blocking Voltage		VR
RMS Reverse Voltage		VR(RMS)	35	70	140	280	420	560	700	V
Average Rectified Output Current	@TA = 50°C	IO				10				A
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave superimposed		IFSM				200				A
on rated load (JEDEC Method)
Forward Voltage (per element)	@IF = 5.0A	VFM				1.2				V
Peak Reverse Current	@TC = 25°C	IRM				10				µA
At Rated DC Blocking Voltage	@TC = 125°C					1.0				mA
Typical Junction Capacitance (Note 1)		Cj				300				pF
Typical Thermal Resistance (Note 2)		R JC				6.3				K/W
RMS Isolation Voltage from Case to Lead		VISO				2500				V
Operating and Storage Temperature Range		Tj, TSTG			-65 to +150					°C

* Glass passivated forms are available upon request.

Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.

2. Thermal resistance junction to case per element mounted on heatsink.

KBPC1000/W – KBPC1010/W

1 of 3

© 20 02 Won-Top Electronics