WTE KBPC5006G, KBPC5008GW, KBPC5008G, KBPC5010GW, KBPC5002GW Datasheet

W T E

KBPC40, 50G/W SERIES

PO WE R SEM IC O ND UC TO R S

40, 50A GLASS PASSIVATED BRIDGE RECTIFIER

Features

! Glass Passivated Die Construction

A

A

! Low Reverse Leakage Current

C

C

! Low Power Loss, High Efficiency

G

G

! Electrically Isolated Epoxy Case for

~

~

+

Maximum Heat Dissipation

D

+

C

C

! Case to Terminal Isolation Voltage 2500V

-

~

-

~

D

H	H
Mechanical Data	E	E
! Case: Epoxy Case with Heat Sink Internally	B	B
Mounted in the Bridge Encapsulation	Metal Heat Sink
! Terminals: Plated Leads Solderable per	KBPC-G	KBPC-GW
MIL-STD-202, Method 208

	! Polarity: Symbols Marked on Case					KBPC-G		KBPC-GW
	!	Mounting: Through Hole for #10 Screw			Dim	Min	Max	Min	Max
					A	28.40	28.70	28.40	28.70
	!	Weight:	KBPC-G	24 grams (approx.)
					B	10.97	11.23	10.97	11.23
			KBPC-GW	21 grams (approx.)
					C	15.70	16.70	17.10	19.10
	!	Marking: Type Number
					D	17.50	18.50	10.90	11.90
				"W” Suffix Designates Wire Leads	E	22.86	25.40	30.50	—
				No Suffix Designates Faston Terminals	G	Hole for #10 screw, 5.08Ø Nominal
			*All Models are Available on B(Height)=7.9mm Max. Epoxy Case		H	6.35 Typical		0.97Ø	1.07Ø
						All Dimension in mm

Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified

Single Phase, half wave, 60Hz, resistive or inductive load.

For capacitive load, derate current by 20%.

Characteristics			Symbol	-00G/W	-01G/W	-02G/W	-04G/W	-06G/W	-08G/W	-10G/W	Unit
Peak Repetitive Reverse Voltage			VRRM
Working Peak Reverse Voltage			VRWM	50	100	200	400	600	800	1000	V
DC Blocking Voltage			VR
RMS Reverse Voltage			VR(RMS)	35	70	140	280	420	560	700	V
Average Rectifier Output Current		KBPC40	IO				40				A
@TC = 55°C		KBPC50					50
Non-Repetitive Peak Forward Surge
Current 8.3ms single half sine-wave		KBPC40	IFSM				400				A
Superimposed on rated load		KBPC50					400
(JEDEC Method)
Forward Voltage Drop	KBPC40 @IF = 20A		VFM				1.1				V
(per element)	KBPC50 @IF = 25A
Peark Reverse Current		@TC = 25°C	IRM				5.0				µA
At Rated DC Blocking Voltage		@TC = 125°C					500

KBPC40, 50G/W SERIES

1 of 4

© 2002 Won-Top Electronics

Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified

	Typical Junction Capacitance (per element)		Cj	300	pF
	(Note 1)
	Typical Thermal Resistance Junction	KBPC40	R JC	1.5	K/W
	to Case (per element) (Note 2)	KBPC50
	RMS Isolation Voltage from Case to Lead		VISO	2500	V
	Operating and Storage Temperature Range		Tj, TSTG	-65 to +150	°C

Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. 2. Thermal resistance junction to case mounted on heatsink.

KBPC40, 50G/W SERIES

2 of 4

© 2002 Won-Top Electronics