Whirlpool PVBN600, PVBC600, PVBM600, PVBS600, PVFE600 Dimension Guide

®

™

Clothes Vitalizing System

PRODUCT MODEL NUMBERS

PVBN600 PVWC600

PVBC600 PVWN600

PVBM600 PVWM600

PVBS600 PVWS600

PVFE600

Electrical: 120-volt, 60-Hz, AC-only, 15or 20-amp. electrical supply. Use copper wire only. A time-delay fuse or circuit breaker and separate circuit is recommended.

For wood or metal studded wall installations, there must be 2 studs in the mounting area.

CUSTOM PANELS

OVERALL DIMENSIONS

9/16"

8-7/8"

57"

59"

A

1" minimum clearance required at bottom of vitalizer for ventilation.

7/16"

5-7/8"

Model shown: PVWN600

35"

12"*

24"**

11-1/4"

30-1/4"

both

doors 90°

*12" minimum clearance to side wall on left side of appliance is required for air venting.

**24" minimum clearance to ceiling or any non-removable object (cabinet, soffit, shelf, etc.) above vitalizer is required for serviceability.

6 ft. power supply cord.

3-prong ground-type outlet must be located within 5 feet of lower right corner.

	for all models		overall depth	panel
		weight	(incl. handle)
	except PVFE600		A	dimensions
	white doors	117 lbs.	15-1/4"	—
	biscuit doors	117 lbs.	15-1/4"	—
	wood panel doors	137 lbs.	15-1/8"	17-1/16" x
				52-13/16" x
	mirrored doors	143 lbs.	15-1/8"
				1/4" thick

For models
PVFE600,	17-1/16"
PVWC600,

PVWS600,

PVBC600,

PVBS600:

52-13/16"

1/4"

Cut door panel as shown. If the desired panel is greater than 1/4" thick, rout a 1/4" thick edge, in 1/4" from all four edges.

Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation	Ref. 8527389
Instructions packed with product. Specifications subject to change without notice.	10-15-02