Whirlpool DD24DI7, DD24DTI7, DD24SHTI7, DD24SI7, DD24STI7 User Manual

...

0 (0)

SELECTION OF WASH PROCESS

Users’ Guide

Scope of Application

Wash Process Selection and Display

(with six combinations of wash programs for selection)

• Mode indicated by display light:

(

ﬂashing), indicates the on-going process

(

ﬂashing) + buzzer alarm, indicates failure of operation due to faults.

METHOD OF PROGRAM SELECTION

(1) Press the

" " " "

buttons on the left hand side of the control panel to set the wash program other than pre-set wash program. (2) Press the "Process" button to select your own combinations of wash process other than the full-automatic process.

Display

Process

Soaking Wash Rinse Spin

Wash Process

Full Program

Wash Only

Spin Only

Wash + Rinse

Rinse + Spin

Full-Automatic Program

Wash

Program

Wash Time

(min.)

Time of

Rinse

Drain + Spin

Time (min.)

Cotton

Synthetics

2 5

Mixed 15 2 5

Wool 6 2 4

Quick 6 1 5

Heavily s oiled bed sheets, tablecloths, towels, underwear, other cotton fabrics

Normally soiled blouses, shirts made of polyester (Diolen, Trevira), Polyamide (

Perlon, Nylan) or blends with cotton.

Lightly or normally soiled cotton or mixed fabrics

Machine washable wool with woolmark label

Sh or tl y w or n o ut er cl ot hin g ma de of cotton, Polyester, Polyamide and blends with cotton.

• Double Power Wash will be applied on Cotton or Mixed Program.

• The washing time and drain+spin time based on Mid water level in this table.

• Softener can be added to dispenser for programs with 2 rinse cycles.

Wash Procedures

WASH PROCEDURES AND PRODUCT SPECIFICATIONS

1. Put drain hose in place.

2. Connect water inlet pipe properly and turn on water tap.

3. Connect to the Power source and press the "ON/OFF" button.

5. Press "Process" button to select your own required combination of wash processes other than the full automatic process.

6. Press "Water Level" button for desired water level.

7. For heavily soiled fabrics, press "Function" button to select the "Overflow Rinse".

8. Press "Function" button to select "Mini Wash" for small laundry load.

9. Press "Function" button to select "Eco Wash" for energy saving.

12. Empty the laundry of all coins, banknotes and other foreign objects before loading it evenly into the drum.

13. Place in detergent. Softener and bleach agent may also be added according to needs.

14. Close the machine lid.

15. Press "Start/Pause" button and the machine will begin water intake.

* When washing i s ﬁnished, the buzzer w ill be on . The mac hine will shut off automatically in three minutes.

PRODUCT SPECIFICATIONS

Rated Voltage 220V~

Rated Frequency 50Hz

Rated Input Power 360W

Washing Capacity 5.0kg

Weight 38kg

Dimensions 504mm x 511mm x 913mm

Cabinet Size 500mm x 500mm

Water Pressure 0.02-0.78MPa

4. Press the

" " " "

buttons on the left hand side of the control panel to set

the wash program or use the preset wash program.

10. Press the " +

" " - "

and

" " " "

buttons to change the preset washing time,

spin time and rinse cycle.

11. Choose "Delay Timer" button to decide when to start washing.

* The machine will be in delay time mode if the delay timer is selected.

The wool wash cycle of this machine has been tested and approved by The Woolmark Company for the washing of Woolmark garments labelled as "machine wash" provided that the garments are washed according to the instructions on the garment label and those issued by the manufacturer of this washing machine. M0605

JS854F

1. Power Switch

2. Wash Program

3. Set Program

棉質

高

浸洗溢出過水

少量洗

省電洗

主洗

過水

中

低

少

迷你

主洗時間

過水次數

預校

合成纖維

混合

羊毛

快速

滾桶清洗

High

Soaking

Overflow

Rinse

Wash

Mini Wash

Eco Wash

Rinse

Spin

Mid

Low

Very Low

Mini

Water Level

Cotton

Spin Time

Washing

Time

Rinse Cycle

Delay Timer

Mixed

Wool

Quick

Basket Cleaning

Synthetics

水時間

水位

Process過程Function

功能

水

Press the switch to connect the mains; press it again to cut off power supply.

The m ac hi ne w il l automatic al ly s hu t of f in 3 minu te s af te r completion of wash program or when the machine is in abnormal operation mode.

1 2

CONSUMPTION OF WATER AND HANDLING OF COMMON FAULTS

Consumption of Water

Handling of Common Faults

NOTES ON CONTROL PANEL

Indicating faults in drainage. The drain pipe is not put down, or clogged, or frozen. Put the drain pipe down and clear it up. Open and close the lid once to resume operation. If still unattended, the machine will shut down after 1.5hr.

If th e problem sti ll remains, c ontact the se rvice people for repair. Please do not disassemble the machine by yourselves.

Whirlpool is committed to continued product enhancement. Product materials and speciﬁcations is subject to changes without prior notice.

Users’ Guide

Select appropriate wash programs according to, the texture and de gr ee o f dir t of f abr ic s by pres si ng " " " ". " BASKE T CLEANING " is only used for cleaning the drum.

5. Water Level Selection

6. Process Selection

7. Function Selection

Acc ord ing to t he degree o f d irt o f l aundry, s ele ct " Overﬂow Rinse". "Overﬂow Rinse" means the continuous injection of water

during rinse process to drain off ﬁlth and soap bubbles through overﬂow outlet.

The washer will be in fuzzy logic status when switched on. When you p ress the "STA RT / PAU SE" button, t he washer wil l start operating, autochecking, setting the water level and completing the wh ole wash ing process . I f you pr ess othe r b utton s, the washer will automatically quit the fuzzy logic mode and enters into manual control mode.

Press " + " or " - " button once to increase or reduce one minute/ numbe r of cycle / half hour, o r keep pr essing this b utton, the dis pl ay ed number k ee p chang in g. R elease th e bu tton, t he change stops.

The preset washing time will be displayed as HH:MM, indicating that the washing process will be finished at the display time. After setting the time, press the "START/PAUSE" button. The washer will be in Start D elay mode. Af ter 30 second s, only t he Delay Timer indicator blinks and "START/PAUSE" button lits up. When the washing cycle starts, the lights will return to their original state. Due to different speeds of water intake, the actual time may vary from the preset time.

Use the se 4 b utt ons to change the p res et was hin g program manually.

Press " " " " buttons to select different programs.

Press " + " " - " buttons to change the time and number of cycles of selected programs.

4. Start / Pause

Press the button to start operation. Press the button to suspend operation during the wash process.

Appropriate water level will be selected automatically based on laundry load and texture of fabrics when the machine is in fuzzy logic control mode.

Press "Water Level" button to select water level by yourself. The selected water level could be changed during wash process. "Min Water Level" is only applicable to "Mini Wash".

Press this button when the machine is in pause mode. You may select combination of wash process other than preset process. Please refer to the washing process selection list on the reverse.

Lights of res pec tiv e programs will be on whe n t his button is pressed .

The flashing display light indicates the progress of wash program.

While the washer is paused, you may reset the washing process combination.

To wash 1.0 Kg, select "MINI WASH". It can be used with any combi nation of was hing programs . " MINI" water level w ill be autom atically set at "MINI WASH ".

"ECO WASH" is designed for saving energy, suitable for washing small quantity of lightly soiled clothes.

Water Level

電源

ON / OFF

Start

Pause

啟動暫停

JS854F

3.5-5.0

2.5-3.5

1.5-2.5

1.0-1.5

Wash Load (kg) Water Consumed (L)

High

Medium

Low

Very Low

Mini

Manifestations of Faults Causes and Handling

Attention

After automatic adjustment for two times, imbalance problem is still unresolved. Please place the laundry evenly. Or the lid is not properly closed, or has been opened by someone during wash process. Close the lid to resume operation."E1" status will continue until faults are attended.

The following symptom is not a fault :

If the drum stops spinning during the spinning process, " b1 " or " b2 " will be displayed. This means the clothes have shifted to one side while spinning, creating an imbalance. The machine will fill with water again to attempt to redistribute the clothes and will begin spinning again if the imbalance is corrected.

Indicating failure to attain the best water level after 30-minute water intake. To be treated and checked as "Malfunction of wash". If the problem is solved, open and close the lid again to resume water intake.

If problem unattended, the machine will shut down automatically after 1hr.

JS854F

+ 2 hidden pages