Weslo 831295020 Owner’s Manual

Modet No. 831.295020
SeriaJ No.

Write the seriaU number in the
space above for future reference,

SeriaUNumber

DecaU

Assembly

Operation
Maintenance

Part List and Drawing

User's Manual

Read aHprecautions and instrueo
tions in this manual before using

this equipment. Save this rnanuaJ

for future reference.

Sears, Roebuck and Co., Roffman Estates, IL 60179

TABLE OF CONTENTS

iMPORTANT PRECAUTIONS ................................................................ 2

BEFORE YOU BEGIN ...................................................................... 4

ASSEMBLY .............................................................................. 5

OPERATION AND ADJUSTMENT ............................................................. 8

HOW TO FOLD AND MOVE THE TREADMILL ................................................. 11

MAINTENANCE AND TROUBLESHOOTING ................................................... 12

CONDiTiONiNG GUiDELiNES .............................................................. 14

ORDERING REPLACEMENT PARTS ................................................. Back Cover

FULL 90 DAY WARRANTY .......................................................... Back Cover

Note: An EXPLODED DRAWING and a PART LiST are attached in the center of this manual.

IMPORTANT PRECAUTIONS

WARNING: Toreducethedskofburne,f re,electricshock,or nju, topersons,read

the following important precautions and information before operating the treadmill.

1. it is the responsibility of the owner te ensure 10. When connecting the power cord (see page 8),
that all users of this treadmill are adequately plug the power cord into a surge suppressor
informed of all warnings and precautions. (not included} and plug the surge suppressor

into a grounded circuit capable of carrying 15

2. Use the treadmill only as described, or more amps. No other appliance should be

3. Place the treadmill on a level surface, with at on the same circuit. Do not use an extension
least eight feet of clearance behind it and two cord.
feet on each side. Do not place the treadmill

on any surface that blocks air openings. To
protect the floor or carpet from damage,
place a mat under the treadmill

4. Keep the treadmill indoors, away from mois-
ture and dust. Do not put the treadmill in a

garage or covered patio, or near water. 12. Failure to use a properly functioning surge

5. Do not operate the treadmill where aerosol
products are used or where oxygen is being

administered.

6. Keep children under the age of !2 and pets
away from the treadmill at aH times.

7. The treadmill should not be used by persons
weighing more than 250 pounds.

8. Never alJow more than one person on the
treadmill at a time.

9. Wear suitabJe exercise cJothes when using
the treadmill. Do not wear loose clothes that

could become caught in the treadmill
AtHetic support clothes are recommended
for both men and women. AIwa9:s wearathleb

ic shoes. Never use the treadmill with bare
feet, wearing only stoc_ngs, or in sandals.

11. Use only a singte-outJet surge suppressor that
meets aJl of the specifications described on

page 8. To purchase a surge suppressor, see

your IocaJ Sears store or call 1o800-366-7278

and order part number 146148, or see your
JocaJeJectronics store.

suppressor could resuJt in damage to the con-

trol system of the treadmill, ff the control sys-
tem is damaged, the walking belt may change
speed or stop une×pectedly, which may result
in a falJ and serious injury.

13. Keep the power cord and the surge suppres-
sor away from heated surfaces.

14. Never move the walking belt while the power
is turned off. Do not operate the treadmill if

rchepower cord or plug is damaged, or i_ the
treadmill is not working properly. (See page 4

if the treadmill is not working properly.}

15. Never start the treadmill whiJe you are stand-

ing on the walking belt. AJways hold the

handrails while using the treadmill

2

16. The treadmill is capable of high speeds. 21. inspect and properly tighten aH parts of the
Adjust the speed in srnaH increments to treadmill regularly.

avoid sudden jumps in speed.

17. Never leave the treadmill unattended while it is opening.
running. Always remove the key and unplug r'_ _ mr"_ _ n,

the power cord when the treadmill is not in 23. tLJ_ J_,_ _M, Always unplug the power
gee. cord immediately after use, before cleaning

18. Do not attempt to raise, mower, or move the
treadmill until it is property assembled. (See

ASSEMBLY on page 5, and HOW TO MOVE
THE TREADMILL on page 11.) You rrnust be

able to safely lift 45 pounds (20 kg) to raise,
Jower, or move the treadmill

19. Do not change the incline of the treadmill by
placing objects under the treadmill. 24. This treadmill is intended for in=home use

20. When folding or moving the treadmill, make onJy. Do not use this treadmill in any corn-
sure that the storage latch is fully closed, rnercial, rentaJ, or institutional setting.

22. Never drop or insert any object into any

the treadmill, and before performing the

maintenance and adjustment procedures
described in this manual Never remove the

rrnotor hood unless instructed to do so by an

authorized service representative. Servicing

other than the procedures in this manual
should be performed by an authorized ser-
vice representative only.

WARNING: Beforebeg nn,ngthisoronyexerc eeprogram,coneu tyourphysician.

This is especially important for persons over the age of 35 or persons with pre-existing health prob-
lems. Read aH instructions before using. Sears assumes no responsibility for personal injury or

property damage sustained by or through the use of this product.

SAVE THESE iNSTRUCTiONS

The decaJs shown have been placed on your treadmill, if a decaJ is missing, or if it is not Jegible, please
call toll-free 1=866-69g-3756 to order a free replacement decal Apply the decaJ in the tocation shown.

Note: The decals are not shown at actual size.

°UnplugTreadmiml

/Disassembly,

3

BEFORE YOU BFGmN

Thank you for selecting the WESLO _ CADENCE 78S
treadmill, The CADENCE 78S treadmill combines

advanced technology with innovative design to let you
enjoy an excellent form of cardiovascular exercise in
the convenience and privacy of your home, And when
you're not exercising, the unique CADENCE 78S
treadmill can be folded up, requiring less than half the
floor space of other treadmills,

For your benefit, read this manuaJ carefully before
using the treadmill, if you have questions after read-

Console

Handrail --

Storage Latch

ing this manual, call 1-800-4-MY-HOME _ (1-800-469-

4663),To help us assist you, please note the product
model number and serial number before calling, The

model number of the treadmill is 831,295020, The ser-
ial number can be found on a decal attached to the

treadmill (see the front cover of this manual for the
location),

Before reading further, please review the drawing

below and familiarize yourself with the labeled parts,

Water Bottle Holder

(Bottle not included)

Key/Clip

Walking Belt

Foot Rails

BACK

Rear Roller
Adjustment Bolts

Upright

FRONT

Circuit Breaker

Power Cord

Leg

RIGHT SIDE

4

ASSEMBLY

Assembly requires two persons. Set the treadmHUin a cleared area and remove aH packing materiaUs, Do not
dispose of the packing materiaUs until assembUy is compUeted,

Note: The underside of the treadmill walking belt is coated with high-performance lubricant, During shipping, a
small amount of lubricant may be transferred to the top of the walking belt or the shipping carton, This is a nor-
mal condition and does not affect treadmill pedormance, if there is lubricant on top of the walking belt, simply
wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner,

Assembly requires the included allen wrenches _ and your own phillips screwdriver

wire cutters ___._4o_, and needtenose pliers

To identify small parts, use the PART IDENTIFICATION CHART attached in the center of this manual
Note: if a part is not in the parts bag, first check to see if it has been prs-assembUsd, If a part is missing,

call toll-free 1-888-899-3758.

1, Make sure that the power cord is unpJugged.

E

._ 38

With the help of a second person, carefully raise the

Uprights (88) until the treadmill is in the position shown,

Cut the tie (not shown) off the right Upright (38),

2, insert one of the Extension Legs (15) into the treadmill

as shown, Make sure that the Base Pad (33) is on the
indicated side, Note: it may be helpful to tip the Uprights
(38) in the direction shown by the arrow as you insert
the Extension Leg,

Attach the Extension Leg (15) with an Extension Leg
Screw (14), Make sure to push on the head of the

Extension Leg Screw while tightening it.

Attach the other Extension Leg (15) in the same way,

5

3, ff there are pUasticties in the brackets on the Handrails

(4), remove the plastic ties, HoUdone of the Handrails
near the right Upright (38) as shown, [nsert the Wire

Harness (53) up through the bracket on the Handrail and
out of the round hoUein the side of the Handrail, ff neces-

sary, use needUenose pliers to pull the Wire Harness out
of the hoUe,Be carefu[ not to damage the Wire

Harness.

[nsert the brackets on the Handrails (4) into the upper
ends of the Uprights (38),

Finger tighten four 1" BoUts(16) with Handrail Washers
(40) into the Uprights (38) and the Handrails (4),

4, Set the ConsoUe Base (87) on the Handrails (4), Thread

four 3/4" Screws (5) into the Handrails and the ConsoUe

Base, After you have started aHfour Screws, tighten the
Screws until they are snug; do not overtighten the
Screws. Note: It may be helpful to press down on the
top of the Console Base above the Handrails as you
tighten the Screws,

4\

53

4O

4O

38

Connectors

\

Bracket

16

87

53

See step 3. Firmly tighten, but do not overtighten,
the four 1" Bolts (16).

hsert the Wire Harness (53) through the two indicated

plastic ties on the Console Base (87) and up through the

hole in the Console Base.

5. Hold the Console (11) near the Console Base (87).
Touch the right Handrait (4) to discharge any static.

Next, insert the Wire Harness (53) through the plastic fie
labeled C in the drawing at the right,

Locate the two connectors on the Wire Harness (53),
Plug the wider connector into the connector labeled A in

the drawing at the right (see drawing 5b), The connec-
tors should slide together easily and snap into

place, If they do not, turn the connector on the Wire
Harness and try again, Insert the other connector

through the plastic tie labeled D; plug the connector into
the connector labeled B (see drawing 5c), IF THE CON-

NECTORS ARE NOT INSERTED PROPERLY, THE
CONSOLE MAY BE DAMAGED WHEN THE POWER

IS TURNED ON.

5 11

87

\

See drawing 5a, Pull any slack in the Wire Harness (53)

through the two ties, Make sure that the end of the Wire

Harness indicated by the arrow is routed as shown,

Securely tighten the plastic ties around the Wire

Harness (53). Cut off the end of each plastic tie,

6

53

5c

B