TP-Link TL-SG1210MP Product Overview

10-Port Gigabit Desktop Switch

with 8-Port PoE+

Highlights

- With eight PoE+ ports, transfers data and power on one single cable

- Working with IEEE 802.3af/at compliant PDs, expands your network

- Supports PoE power up to 30 W for each PoE port

- Supports PoE power up to 123 W* for all PoE ports

- Up to 250 m data and power transmission under Extend Mode** specially designed for surveillance

system

- Priority Mode ensures high priority of port 1–2 to guarantee the quality of sensitive application

- Isolation Mode allows one-click client trac separation for higher security and performance

- With PoE Auto Recovery, the switch will automatically reboot your dropped or unresponsive

PoE-powered devices connected to port 1–8

- Requires no conguration and installation

- Fanless Design

- Supports desktop and wall mountable installation methods

Overview

TL-SG1210MP is an unmanaged switch with 10 Gigabit ports that requires no conguration and

provides 8 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE

802.3af/at compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along

with data in one single cable allowing you to expand your network to where there are no power lines or

outlets, where you wish to x devices such as APs, IP Cameras or IP Phones, etc.

Power Over Ethernet

8 RJ45 ports (port 1 to port 8) of the switch support Power over Ethernet (PoE) function. These PoE

ports can automatically detect and supply power with those IEEE 802.3af/at compliant Powered

Devices (PDs).

Overload Arrangement

TL-SG1210MP has the priority function which will help protect the system when the system power is

overloaded. If all PoE PDs power consumption is ≥ 123 W*, a priority will be arranged among the PoE

ports, then the system will cut o the power of the lowest-priority port.

Intelligent Power Management

Priority (port 1 > port 2 > port 3>... > port 8): This function will help protect the system when the system

power is overloaded. For example, port 1, 2, 3 and 5 is using 25 W respectively (maximum power per

port is 30 W); the system power is 100 W in total. If there is an additional PD inserted to port 4 with 30

W, and then the system will cut o the power of port 5 because of the overloaded power, this means

port 1, 2, 3 will use 25 W respectively and port 4 will use 30 W, no power will be supplied to port 5.

Highlight Performance

• Up to 250 m PoE power supply and data transmission under Extend Mode** for port 1-4.

• Priority Mode ensures high priority of port 1–2 to guarantee the quality of sensitive application.

• Isolation Mode easily divides trac for port 1-4/5-8 to avoid snooping and tampering, which improves

LAN security and performance.

• With PoE Auto Recovery, the switch will constantly detect the data transmission with PoE-powered

devices (PD) for port 1-8. When the switch nds that a PD stops sending data packets to the switch

for a long period, the switch will reboot it automatically.

Easy to Use

TL-SG1210MP is easy to install and use. It requires no conguration and installation. With desktop and

wall mountable design, outstanding performance and quality, the TP-Link 10-Port Gigabit Desktop

Switch with 8-Port PoE+ TL-SG1210MP is a great selection for expanding your network.