TP-Link TL-SF1016D, TL-SF1024M Installation Guide
Installation Guide
10/100 Mbps Desktop Switch
For simplicity, we will take TL-SF1005D for example throughout this Guide.
Connection
LED Explanation
©2020 TP-Link 7106508781 REV16.1.0
Power
On: Power on
O: Power o
Link/Act
On: Link present but no activity
Flashing: Transmitting/receiving data
O: No link
Internet
Ethernet Ports (1-5) Power Adapter
Router
LAN PortWAN Port
PC
PC
Frequently Asked Questions (FAQ)
Specications
Q1. The Power LED is not lit.
The Power LED should be lit when the power system is working
normally. If the Power LED is not lit, please check as follows:
A1:
Make sure the power cord is connected to the switch with power
source properly.
A2:
Make sure the voltage of the power supply meets the
requirements of the input voltage of the switch.
A3: Make sure the power source is ON.
Q2. The Link/Act LED is not lit when a device is
connected to the corresponding port.
It is recommended that you check the following items:
A1:
Make sure that the cable connectors are rmly plugged into the
switch and the device.
A2: Make sure the connected device is turned on and working well.
A3: The cable must be less than 100 meters long (328 feet).
General Specications
Standard
Protocol
Interface
Network Media (Cable)
LED Indicators
Data Transfer Rate
Transfer Method
MAC Address Learning
Frame Forward Rate
Wall Mountable
Distance Between
Mounting Holes
IEEE 802.3, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x
CSMA/CD
5/8/16/24 10/100 Mbps Auto-Negotiation RJ45 Ports
10BASE-T: UTP category 3, 4, 5 cable (≤100 m)
EIA/TIA-568 100Ω STP (≤100 m)
100BASE-TX: UTP category 5, 5e cable (≤100 m)
EIA/TIA-568 100Ω STP (≤100 m)
Power, Link/Act LEDs
Ethernet: 10 Mbps (Half Duplex), 20 Mbps (Full Duplex)
Fast Ethernet: 100 Mbps (Half Duplex), 200 Mbps (Full
Duplex)
Store-and-Forward
Automatically learning, automatically aging
10Base-T: 14881 pps/Port
100Base-Tx: 148810 pps/Port
TL-SF1005D, TL-SF1008D: No
TL-SF1016D, TL-SF1024M: Yes
TL-SF1016D: 157.2 mm
TL-SF1024M: 178 mm
To ask questions, find answers, and communicate with TP-Link users or
engineers, please visit https://community.tp-link.com to join TP-Link
Community.
For technical support and other information, please visit
https://www.tp-link.com/support, or simply scan the
QR code.
If you have any suggestions or needs on the product
guides, welcome to email techwriter@tp-link.com.cn.
EU declaration of conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and
other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU
and (EU)2015/863.
The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce.
Environmental and Physical Specications
Operating Temperature
Operating Humidity
Storage Humidity
Safety Information
Keep the device away from water, re, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device. If you need service, please
contact us.
Do not use damaged charger or USB cable to charge the device.
Do not use any other chargers than those recommended.
Adapter shall be installed near the equipment and shall be easily accessible.
Place the device with its bottom surface downward.
Use only power supplies which are provided by manufacturer and in the origin packing
of this product. If you have any questions, please don’t hesitate to contact us.
0˚C to 40˚C (32˚F to 104˚F)
10% to 90%RH non-condensing
5% to 90%RH non-condensing
Loading...