TP-LINK TL-SF1008P User Manual

8-port 10/100M Desktop PoE Switch
TL-SF1008P
With four PoE ports,
transfers data and power
on one single cable
Working with IEEE 802.3af
compliant PDs, expands
home and oce network
Requires no conguration
and installation
Description
TL-SF1008P is an 8 10/100M ports unmanaged switch that requires no configuration and provides 4 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc. TL-SF1008P has the priority function which will help protect the system by cutting off the power of the lowest-priority port when the system power is overloaded.
www.tp-link.com
FeaturesSpecifications
Standards
Interfaces
Network Media(Cable)
Transfer Method MAC Address Table MAC Address Learning
Data Transfer Rate
Frame Forward Rate
PoE Power on RJ45
Power Supply
Power Consumption
LEDs Certications Operating Temperature Storage Temperature Operating Humidity Storage Humidity Dimensions(L x W x H)
IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.3af 8 10/100M Auto-Negotiation RJ45 ports with 4 PoE ports (port-1 to port-4) 10Base-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 100Base-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Store-and-Forward 1K Automatically learning, automatically aging Ethernet: 10Mbps (Half Duplex), 20Mbps (Full Duplex) Fast Ethernet: 100Mbps (Half Duplex), 200Mbps (Full Duplex) 10Base-T: 14880pps/Port 100Base-Tx: 148800pps/Port Power+: pin 3 & pin 6 Power -: pin 1 & pin 2 Input: External power adapter Output: 48VDC
5.8 watts. (max. no PD connected) 58 watts (max. with 53w PD connected) Power, Link/Act, 100Mbps, PoE Status CE, FCC 0°C ~ 40°C (32°F ~ 104°F )
-40°C ~ 70°C (-40°F ~ 158°F ) 10% ~ 90% RH non-condensing 5% ~ 90% RH non-condensing
6.7x3.9x1.1in.(171x98x27mm)
Complies with IEEE802.3, IEEE802.3u, IEEE802.3af standards
1K entry MAC address table of the TL-SF1008P with auto-learning and auto-aging
8 10/100Mbps Auto-Negotiation RJ45 ports with 4-port PoE function (port-1 to port-4), all of them support Auto MDI/MDIX
Supports PoE power up to 15.4W for each PoE port
Supports PoE power up to 53W for all PoE ports
Supports PoE IEEE 802.3af compliant PDs
Supports IEEE802.3x ow control for Full-duplex Mode and backpressure for Half-duplex Mode
Supports priority function to protect the system when the system power is overloaded
LED indicators for monitoring power, link, activity and speed
External power adapter supply
Diagram:
Data only Power only Data and Power
IP Camera
IP Phone
Internet
TL-R460
Cable/DSL Router
TL-SF1008P
Desktop PoE Switch
TL-WA601G
Wireless Access Point
TL-POE10R
PoE Receiver Adapter
Package:
-
8-port 10/100M Desktop PoE Switch TL-SF1008P
-
User Guide
-
DC Power Adapter
Related Products:
-
24+4G Gigabit-Uplink Web Smart Switch TL-SL2428WEB
-
Cable/DSL Router TL-R460
-
PoE Receiver Adapter TL-POE10R
-
108M Wireless Access Point TL-WA601G
-
10/100M PCI Network Adapter TF-3239DL
Specifications are subject to change without notice. is a registered trademark of TP-LINK Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specificationsmay be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK Technologies Co., Ltd.
Copyright © 2008 TP-LINK Technologies Co., Ltd. All rights reserved.
www.tp-link.com
Loading...