
8-Port 10/100Mbps
Desktop Switch with 4-Port PoE
MODEL: TL-SF1008LP Datasheet
Highlights
- With four PoE ports, transfers data and power on one single cable
- Working with IEEE 802.3af compliant PDs, expands your network
- Supports PoE power up to 15.4 W for each PoE port
- Supports PoE power up to 41 W* for all PoE ports
- Up to 250 m data and power transmission under Extend Mode** specially designed for surveillance
system
- Priority Mode ensures high priority of port 1–2 to guarantee the quality of sensitive application
- Requires no conguration and installation

Overview
TL-SF1008LP is an unmanaged switch with 8 10/100Mbps ports that requires no conguration and
provides 4 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all
IEEE 802.3af compliant Powered Devices (PDs). In this situation, the electrical power is transmitted
along with data in one single cable allowing you to expand your network to where there are no power
lines or outlets, where you wish to x devices such as APs, IP Cameras or IP Phones, etc.
Power Over Ethernet
4 of the 8 Auto-Negotiation RJ45 ports (port 1 to port 4) of the switch support Power over Ethernet
(PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af
compliant Powered Devices (PDs).
Overload Arrangement
TL-SF1008LP has the priority function which will help protect the system when the system power is
overloaded. If all PoE PDs power consumption is ≥ 41 W*, a priority will be arranged among the PoE
ports, then the system will cut o the power of the lowest-priority port.
Intelligent Power Management
Priority (port 1 = port 2 = port 3 > port 4): This function will help protect the system when the system
power is overloaded. For example, port 1, 2 and 4 is using 12 W (maximum power per port is 15.4 W);
the system power is 36 W in total. If there is an additional PD inserted to port 3 with 12 W, and then the
system will cut o the power of port 4 because of the overloaded power, this means port 1, 2, and 3 will
use 12 W, no power will be supplied to port 4.
Highlight Performance
• Up to 250 m PoE power supply and data transmission under Extend Mode**.
• Priority Mode ensures high priority of port 1–2 to guarantee the quality of sensitive application.
Easy to Use
TL-SF1008LP is easy to install and use. It requires no conguration and installation. With desktop and
wall mountable design, outstanding performance and quality, the TP-Link 8-Port 10/100Mbps Desktop
Switch with 4-Port PoE TL-SF1008LP is a great selection for expanding your network.

Specications
Hardware Features & Performance
Product Picture
Model TL-SF1008LP
Standards IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3af
Network Ports 8 * 10/100 Mbps RJ45 ports with 4 PoE ports (port 1 to port 4)
10Base-T: UTP category 3, 4, 5 cable (maximum 100 m)
Network Media (Cable)
PoE
Auto-Negotiation YES
Auto MDI/MDIX YES
PoE Power on RJ45
Max Power Consumption
Max Heat Dissipation
Forwarding Mode Store and Forward
Switch Capacity 1.6 Gbps
MAC Address Table 2k, Auto-learning, Auto-aging
Extend Mode YES
Priority Mode YES
Flow Conrol YES
Fanless YES
LED Power, Link/Act, PoE Status, PoE MAX
Dimensions 6.7 x 3.9 x 1.1 in. (171 x 98 x 27 mm)
Environment
EIA/TIA-568 100 Ω STP (maximum 100 m)
100Base-TX: UTP category 5, 5e cable (maximum 100 m)
EIA/TIA-568 100 Ω STP (maximum 100 m)
PoE Standard: IEEE 802.3af
PoE Port 1–4, up to 15.4 W per port
PoE Power Budget 41 W*
Power+: pin 3 & pin 6
Power -: pin 1 & pin 2
2.2 W (220 V/50 Hz no PD connected)
47.1 W (220 V/50 Hz with 41 W PD connected)
7.5 BTU/h (no PD connected)
160.61 BTU/h (with 41 W PD connected)
CE, FCC
Operating Temperature: 0°C to 40°C (32°F to 104°F)
Storage Temperature: -40°C to 70°C (-40°F to 158°F)
Operating Humidity: 10% to 90% RH, non-condensing
Storage Humidity: 5% to 90% RH, non-condensing
Note:
* PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will
vary as a result of client limitations and environmental factors.
**The speed of the ports which are under extend mode will be downgraded to 10Mbps. Actual transmission
distance may vary from the quality of the cables.
www.tp-link.com
Specications are subject to change without notice. TP-Link is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or
registered trademarks of their respective holders. Copyright © 2020 TP-Link Technologies Co., Ltd. All rights reserved.