COLLISION REPAIR INFORMATION
FOR THE TOYOTA DEALER
TITLE: |
BODY DIMENSIONS FOR THE '89 |
PAGE 1 of 22 |
|
|
CRESSIDA AND '89 TRUCK |
|
|
|
|
|
|
SECTION: |
STRUCTURAL REPAIR |
BULLETIN #30 |
|
MODELS: |
1989 CRESSIDA AND 1989 TRUCK |
|
|
DATE: |
OCTOBER 1988 |
|
|
The attached specific body dimensions should be used whenever any body repairs are performed on the '89 Cressida and '89 trucks. These dimensions are contained in the 1989 Cressida Service Manual (P/N 00400±RM117) and the 1989 Truck Service Manual (P/N 00400±RM118).
The Toyota Repair Manual for Collision Damage for the 1989 Cressida should be available late November or early December. This manual contains detailed information on all body panel replacement procedures.
General measurement procedures for body and frame repairs of all Toyota models may be found in the body repairs section of the Toyota Fundamental Body Repair Procedures
Manual (P/N 00400±BRM002E).
All of the above mentioned service and repair manuals can be ordered through the non±parts ordering system.
NOTE: PLEASE ROUTE THIS BULLETIN TO THE BODY SHOP MANAGER OR THE PERSON RESPONSIBLE FOR COLLISION REPAIR INFORMATION.
BODY DIMENSIONS (cont'd) |
PAGE 2 of 22 |
1989 CRESSIDAÐENGINE COMPARTMENT
BODY DIMENSIONS (cont'd) |
PAGE 3 of 22 |
UNDERBODY
1989 CRESSIDA
BODY DIMENSIONS (cont'd) |
PAGE 4 of 22 |
UNDERBODY (cont'd)
1989 CRESSIDA
BODY DIMENSIONS (cont'd) |
PAGE 5 of 22 |
BODY OPENING AREAS (Side View)
1989 CRESSIDA
BODY DIMENSIONS (cont'd) |
PAGE 6 of 22 |
BODY OPENING AREAS (Overhead View)
1989 CRESSIDA
BODY DIMENSIONS (cont'd) |
PAGE 7 of 22 |
1989 TRUCKÐBODY OPENING AREAS (Overhead View)