TEC Laser Scanner
LS-780 SERIES
Owner’s Manual
CE Compliance (for EU only)
This product complies with the requirements of EMC and Low Voltage Directives including their amendments.
Caution:
For U.S and Canada, use a UL Listed or Recognized, ITE or Class 2 power supply unit having a L-shaped output connector.
For Europe, use a CE marked ITE or Class 2 power supply unit having a L-shaped output connector.
Rated output of the power supply unit shall be 12 Vdc –10% 800 mA or more.
FCC Notice (for USA only)
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Changes or modifications not expressly approved by manufacturer for compliance could void the user's authority to operate the equipment.
WARNING
This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
ATTENTION
Ce produit est de classe A. Dans un environnement domestique, il peut causer des interférences radio. Auquel cas, l’utilisateur sera amené à prendre les mesures adéquates.
Warnung
Dies ist ein Klasse A Produkt. In einer örtlichen Umgebung kann dieses Gerät Funkstörungen verursachen.
Atención
Este es un producto de la clase A. En ambientes domésticos éste producto puede causar radio interferencias en cuyo caso el usuario deberá tomar las medldas oportunas.
VERWITTIGING
Dit is een klasse A produkt. Het gebruik hiervan kan radio interferenties veroorzaken die de gebruiker ertoe kunnen dwingen sommige maatregelen te moeten treffen.
Copyright©©20011997 bybyTOSHIBATEC CORPORATIONTEC CORPORATION AllAllRightsReserved
5702-6Ohito,-13 Nakameguro,Ohito-cho, TagataMeguro-gun,-ku, Tokyo,ShizuokaJAPAN-ken, JAPAN
Safety Summary |
EO1-19036 |
|
|
Safety Summary
Personal safety in handling or maintaining the equipment is extremely important. Warnings and Cautions necessary for safe handling are included in this manual. All warnings and cautions contained in this manual should be read and understood before handling or maintaining the equipment.
Do not attempt to effect repairs or modifications to this equipment. If a fault occurs that cannot be rectified using the procedures described in this manual, turn off the power, unplug the machine, then contact your authorized TOSHIBA TEC representative for assistance.
Meanings of Each Symbol
This symbol indicates warning items (including cautions). Specific warning contents are drawn inside the symbol. (The symbol on the left indicates a general caution.)
This symbol indicates prohibited actions (prohibited items). Specific prohibited contents are drawn inside or near the symbol. (The symbol on the left indicates “no disassembling”.)
This symbol indicates actions which must be performed. Specific instructions are drawn inside or near thesymbol.
(The symbol on the left indicates “disconnect the power cord plug from the outlet”.)
|
|
This indicates that there is the risk of death or serious injury if the |
||||
WARNING machines are improperly handled contrary to this indication. |
||||||
Prohibited |
|
Do not plug in or unplug the power |
Any other than the |
|
Do not use voltages other than the |
|
|
specified AC voltage |
|
||||
cord plug with wet hands as this may |
voltage (AC) specified on the rating |
|||||
|
is prohibited. |
|||||
|
cause electric shock. |
|
plate, as this may cause fire or |
|||
|
|
|
|
electric shock. |
Prohibited |
|
If the machines share the same |
Prohibited |
|
|
Do not place metal objects or |
|
|
|
||||||
|
|
||||||
outlet with any other electrical |
water-filled containers such as flower |
||||||
|
|
||||||
|
appliances which consume large |
|
vases, flower pots or mugs, etc. on |
||||
|
amounts of power, the voltage will |
|
top of the machines. If metal objects |
||||
|
fluctuate widely each time these |
|
or spilled liquid enter the machines, |
||||
|
appliances operate. Be sure to |
|
this may cause fire or electric |
||||
|
provide an exclusive outlet for the |
|
shock. |
||||
|
machine as this may cause fire or |
|
|
|
|
||
|
electric shock. |
|
|
|
|
||
|
|
|
|
|
|
|
|
Prohibited |
|
Do not insert or drop metal, |
Prohibited |
|
|
Do not scratch, damage or modify |
|
|
|
|
|||||
|
|
|
|||||
flammable or other foreign objects into |
the power cords. Also, do not place |
||||||
|
|
||||||
|
the machines through the ventilation |
|
heavy objects on, pull on, or exces- |
||||
|
slits, as this may cause fire or electric |
|
sively bend the cords, as this may |
||||
|
shock. |
|
cause fire or electric shock. |
Disconnect |
|
If the machines are dropped or their |
Disconnect |
|
Continued use of the machines in an |
|
|
||||
the plug. |
cabinets damaged, first turn off the |
the plug. |
abnormal condition such as when the |
||
|
power switches and disconnect the |
|
machines are producing smoke or strange |
||
|
power cord plugs from the outlet, and |
|
smells may cause fire or electric shock. In |
||
|
then contact your authorized |
|
these cases, immediately turn off the power |
||
|
TOSHIABA TEC representative for |
|
switches and disconnect the power cord |
||
|
assistance. Continued use of the |
|
plugs from the outlet. Then, contact your |
||
|
machine in that condition may cause |
|
authorized TOSHIABA TEC representative |
||
|
fire or electric shock. |
|
for assistance. |
(i)
Safety Summary |
EO1-19036 |
|
|
|
|
|
|
Disconnect |
|
If foreign objects (metal fragments, |
Disconnect |
|
|
When unplugging the power |
|
|
|||||||||
|
|
|||||||||
|
|
|
|
the plug. |
water, liquids) enter the machines, |
the plug. |
cords, be sure to hold and pull on |
|||
|
|
|
|
|
first turn off the power switches and |
|
the plug portion. Pulling on the cord |
|||
|
|
|
|
|
disconnect the power cord plugs from |
|
portion may cut or expose the inter- |
|||
|
|
|
|
|
the outlet, and then contact your |
|
nal wires and cause fire or electric |
|||
|
|
|
|
|
authorized TOSHIABA TEC repre- |
|
shock. |
|||
|
|
|
|
|
sentative for assistance. Continued |
|
|
|
|
|
|
|
|
|
|
use of the machine in that condition |
|
|
|
|
|
|
|
|
|
|
may cause fire or electric shock. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connect a |
|
Ensure that the equipment is |
No |
|
|
Do not remove covers, repair or |
|
|
|
|
|
|
|
||||
|
|
|
|
grounding |
|
|
|
|||
|
|
|
|
|
|
|
||||
|
|
|
|
properly grounded. Extension cables |
disassembling. modify the machine by yourself. It may |
|||||
|
|
|
|
wire. |
||||||
|
|
|
|
|||||||
|
|
|
|
should also be grounded. Fire or |
|
result in hazardous radiation expo- |
||||
|
|
|
|
|
|
|||||
|
|
|
|
|
electric shock can occur on improp- |
|
sure. |
|||
|
|
|
|
|
erly grounded equipment. |
|
Unauthorized modification is prohib- |
|||
|
|
|
|
|
|
|
|
ited. |
Prohibited |
|
Do not remove the glass surface (top |
Prohibited |
|
Using the laser beam with large |
|
|
|
|||||
|
|
|||||
window) except for cleaning, as using |
mirrors or optical equipment will result |
|||||
|
|
|||||
|
the machine in this condition may |
|
in increased risk to people’s eyes |
|||
|
adversely affect people’s eyes. |
|
and avoid viewing direct laser beam |
|||
|
|
|
|
for a long time. |
CAUTIONThis indicates that there is the risk of personal Injury or damage to objects if the machines are improperly handled contrary to this indication.
Precaution
The following precautions will help to ensure that this machine will continue to function correctly.
•Try to avoid locations that have the following adverse conditions:
* |
Temperatures below 0 C and above 40 C |
* |
Direct sunlight |
* |
Shared power socket |
* |
Excessive vibration |
•Do not subject the machine to sudden shocks.
•Clean the cover and Top Window, etc. by wiping with a dry cloth or a cloth soaked with detergent and wrung out thoroughly. Never use thinner or other volatile solvent for cleaning.
•At the end of the day, turn the power OFF, then clean and inspect the exterior of the machine.
•Try to avoid using this equipment on the same power supply as high voltage equipment or equipment likely to cause mains interference.
•Do not place heavy objects on top of the machines, as these items may become unbalanced and fall causing injury.
•Do not lean against the machine. It may fall on you and could cause injury.
Request Regarding Maintenance
•Utilize our maintenance services.
After purchasing the machines, contact your authorized TOSHIBA TEC representative for assistance once per year.
•Our maintenance service performs the periodic checks and other work required to maintain the quality and performance of the machines, preventing accidents beforehand.
For details, please consult your authorized TOSHIBA TEC representative for assistance.
•Using insecticides and other chemicals
Do not expose the machines to insecticides or other volatile solvents, as this will deteriorate the cabinet or other parts or cause the paint to peel.
(ii)