Teac FILLTUNE HP-F100 User Manual

Filltune
Bone-Conduction
Headphones

Hi-end Stereo Headphones

Model HP-F100

• Ideal for anyone (especially
middle-aged and elderly) with
hearing difficulty or impairment

• Bone-conduction technology
generates direct vibration to
users sensor

• Bone-conduction allows users
to re-capture the pleasures of
virtually all audio…including
high-quality music

• Filltune headphones rest on user’s temples...thus allowing
for music-listening while simultaneously being able to hear
ambient sounds

• Supports a wide range of audio frequencies, from 25 Hz to
25 kHz, for clear, distinct sound quality

• Output capabilities up to .76 watts to each channel

• Long-lasting 10-hour battery life

• Fully compatible with any audio source with stereo mini-jack/Out

Unlike conventional headphones which vibrates the eardrum
between the outer- and middle-ear using air vibrations produced
by the speaker,
Magnetostrictive bone-conduction technology that vibrates the
sense organ directly, thus allows you to pick up high frequencies
that are produced in high-quality music.

y organ

Filltune HP-F100 headphones use giant

Place headset
directly on
bone in front
of ear as
shown here.

Not having the use of eardrums to feel sound, middle-aged or
elderly people having mild conductive hearing loss (or those with
presbycusis, having difficulty hearing high frequency sounds) can
also enjoy music through the Filltune headphones. Or, for those
who simply enjoy listening to loud Hi-Fi music but are concerned
with deteriorating hearing, then TEAC’s new Filltune Bone­Conduction headset is also the answer!

Regular headsets that rely on air conduction are kno
hearing loss, especially after extended use over time. But the use
of bone-conduction technology stimulates the auditory nerve
bypassing the eardrum, making it the safer means of sound delivery.

Aside from preventing damage to eardrums, bone-conduction
technology also offers the advantage of keeping ambient noise
audible, which is required in many occupational applications and
businesses.

Filltune also comes with a remote control, which not only adjusts

ut has its o

, b

olume

the v

ering up to .76-watts to each channel. Filltune features a wide

deliv
range of playback of frequencies, from 25Hz to 25 kHz. Filltune
has a long batter
AAA batter
weighs only 4.2 oz (120 grams).

y pla

This stylish, lightw

.

ies

wn amplifier to produce better output

k time of up to 10 hours using three

ybac

eight and foldable headset

wn to cause

Specifications

Filltune Model No.: HP-F100

Head Phone

Type

Bone Conduction Headphone
(Giant magnetostrictive Transducer)

Amplifier

Output Force Level

Impedance

Dimension (W x H x D)

Weight

Battery Life

Output Power (L+R)

Input Sensitivity /
Impedance

Frequency Response

Max Input Voltage

Input Connector

Output Connector

Power Requirement

Power Consumption

Dimension (W x H x D)

103dB (20kHz), 102dB (1kHz) / 1Vpp

9 Ω

112 x 103 x 22mm

Approx. 120g (not including code)

Approx. 10 Hours

0.76W + 0.76W (36V)

MIC: 1.74mV/ 1.5kΩ
LINE: 61.6mV/ 16.9kΩ

MIC: 60 to 15,000 Hz (+0/-3 dB)
LINE: 25 to 25,000 Hz (+0/-3 dB)

2V

MIC: 3.5mm (1/8in.) Plug-in power support
LINE: 3.5mm (1/8in.)

Headphone

3 x "AAA" dry batteries

0.5A

32 x 24 x 134mm

Weight

Microphone Connector

Type

Output Impedance

Power Supply

Plug

Tested Microphones

Approx 50g (not including batteries)

Electlet Condenser Stereo-Microphone

680 - 1.5k Ω

Plug-in power

3.5 mm (1/8in.) Stereo mini plug

Panasonic: RP-VC201

Technica: AT9830

udio

A
Hattori-Electronics: EM-204

TEAC America, Inc. 7733 Telegraph Road, Montebello, CA 90640 • Phone [phone] • Fax [phone] • www.teac.com/DSPD

All rights reserved. All trademarks and registered trademarks mentioned herein are the property of their respective companies.

ica, Inc.

C Amer

TEA

2007

©

* All Specifications Subject to Change

Without Notice

DSPD-87515/607/File