Taylor C723 ADA User Manual

Item No.
C723 ADA
®
C723 ADA
Soft Serve Freezer
Twin Twist
Features
Offer all the popular soft serve variations from low or non­fat ice creams to custards, yogurt and sorbet. Serve two separate soft serve flavors, or an equal combination of both in a twist.
Freezing Cylinder
Two, 2.8 quart (2.7 liter).
Mix Hopper
Two, 14 quart (13.2 liter). Separate hopper refrigeration (SHR) maintains mix below 41ºF (5ºC) during Auto and Standby modes.
Indicator Lights
Digital readout displays hours since last brush cleaning to assure product safety. Mix Low light alerts operator to add mix. Audible alarm may be enabled to sound when mix is low. When the Mix Out light flashes, the unit shuts down automatically to prevent damage.
Touch Screen Controls
Microprocessor touch controls are embedded in durable tempered glass panel. Multiple languages are selectable. Viscosity is continually measured to dispense consistent quality soft serve desserts. Temperatures in the hoppers or freezing cylinders may be displayed at any point of operation, in either Fahrenheit or Celsius. Draw counter allows operator to view number of servings dispensed.
Shown with optional ADA cart.
Shown with optional top air
discharge chute.
Rockton, Illinois 61072
800-255-0626
Phone 815-624-8333 Fax 815-624-8000
www.taylor-company.com
e-mail: info@taylor-company.com
Standby
During long no-use periods, the standby feature maintains safe product temperatures in the mix hopper and freezing cylinder.
Door Interlock System
Protects the operator from injury as the beater will not operate without the dispensing door in place.
Freezer Door
A specially designed thermo-plastic door allows quick ejection of product with a simple movement of the draw handle. Self closing draw handles are standard.
Meets Americans with Disabilites Act (ADA) dispensing height for self
service application
International Office Taylor Company S.r.l. Roma, Italy Tel: +39-06-420-12002 Fax: +39-06-420-12034 e-mail: romeoff@taylor-company.com
ISO 9001:2008 Registered Firm
C723 ADA Soft Serve Freezer
C723 ADA
Shown with optional Air Discharge Chute and ADA Cart
Weights lbs. kgs.
Net 500 226.8 Crated 559 253.6
cu. ft. cu. m.
Volume 39.2 1.11
Dimensions in. mm.
Width 23-5/16 592 Depth 33-13/16 858 Height 36-1/2 927 Counter Clearance --- ---
*Designed to rest on a plastic pad directly on counter top or optional cart.
Electrical Maximum Minimum Poles (P) Fuse Size Circuit Ampacity Wires (W)
208-230/60/1 Air 40 29 2P 3W 208-230/60/1 Water 40 29 2P 3W 208-230/60/3 Air 25 18 3P 4W 208-230/60/3 Water 25 18 3P 4W 220-240/50/1 Air 30 24 2P 3W 380-415/50/3N~ Air 12 9 4P 5W
This unit may be manufactured in other electrical characteristics. Refer to the local Taylor Distributor for availability.
(For exact electrical information, always refer to the data label of the unit.)
Continuing research results in steady improvements; therefore,
these specifications are subject to change without notice.
Bidding Specs Electrical: Volt Hz ph
Neutral:
Options:
Yes  No Cooling: Air Water NA
Specifications
Electrical
One dedicated electrical connection is required. See the Electrical chart for the proper electrical requirements. Manufactured to be permanently connected. Consult your local Taylor distributor for cord & receptacle specifications as local codes allow.
Beater Motor
Two, 1.0 HP.
Refrigeration System
One, 9,500 BTU/hr. R404A. Separate Hopper Refrigeration (SHR), One, 400 BTU/hr. R134a. (BTUs may vary depending on compressor used.)
Air Cooled
Minimum 6” (152 mm) on both sides. It is recommended to place the rear of the unit against a wall, or allow 6” clearance (152 mm) at the rear. Optional air discharge chute directs heated air exhaust upwards; minimum clearance above top air discharge chute is 12” (305 mm). No clearance required on right side if air discharge chute is used.
Water Cooled
Water inlet and drain connections out rear panel 3/8” FPT.
Options
• Standard Cart with casters and a door (see C723 spec. sheet)
Net Weight: 74 lbs. (33.6 kg) Crated Weight: 95 lbs. (43.1 kg)
• ADA Cart with casters - recommended for self service to meet ADA compliant dispensing height - no door (shown) Net Weight: 74 lbs. (33.6 kg) Crated Weight: 87 lbs. (39.5 kg)
• Drain Adaptor (for ease of rinsing & cleaning)
• Draw handles to comply with ADA force requirement
• Draw Valve Lock Kit
• Hopper Locks
• Hopper Agitators
• Legs - [increase height of unit by 4-1/4” (108 mm)]
• Decals - Twist or Flavor Burst Cone
• Top Air Discharge
Taylor Company,
Rockton, Illinois 61072 815-624-8333 800-255-0626 Fax 815-624-8000
www.taylor-company.com
069352-ADA 3/14
Loading...