Page 1
Page 1 of 1
9610
TASCAM DA-30Mk2/DA-P1, Swelling of Loading Belt
Problem: Loading Belt (Ref 4-58) slips/comes off. Error 01 appears.
Cause: Swelling of Loading Belt. Grease applied to a loading worm gear affects the belt.
Solution: Material change of the Loading Belt.
Urethane made belt, P/No. V000135-00B has been newly introduced on the products:
DA-30Mk2 S/No. 290001 and up
DA-P1 S/No. 130001 and up
When servicing, follow the procedure below.
1 Remove and discard a swelled loading belt.
2 Remove and discard a washer fixing a loading worm gear.
3 Pull out the loading worm gear.
4 Fit a brand new loading worm gear (V000535-00A) which has been registered in spares.
(or original gear can be re-used if grease can be removed from the gear perfectly.)
5 Fix the loading worm gear by a brand new washer (V000114-00A).
6 Clean a motor pulley.
7 Fit a new loading belt (V000135-00B).
31st May 1996
Mechanism Bottom View
Loading Belt
Washer
P/No. V000114-00A
Loading Worm Gear
P/No. V000535-00A
Worm
Gear
Shaft
4A1697
Loading...