Schneider Electric AM-610 Data Sheet

Application

To provide 24 Vac power to components such as actuators and controllers.

Features

• Meets NEC Class 2 requirements

• 120/208/240 Vac multiple primary

AM-610

Transformer

General Instructions

• Color coded leads

Applicable Literature

• Cross-Reference Guide, F-23638

• Reference Manual, F-12683

• Application Manual, F-21335

SPECIFICATIONS

Transformer Inputs

Environment

INSTALLATION

Inspection

Voltage and Current Ratings:

Primary, 120/208/240 volts, 50/60Hz.

Secondary, 24 Vac, 40 VA. Leads: 7" (178 mm) long, #18 GA. stranded wire. Rating: NEC Class 2. Mounting: 1/2"-14 standard straight pipe thread conduit nipple.

Ambient Temperature Limits:

Shipping and Storage, -40 to 160°F (-40 to 71°C).

Operating, -40 to 140°F (-40 to 60°C). Location: NEMA Type 1.

Inspect the package for damage. If damaged, notify the appropriate carrier immediately. If undamaged, open the package and inspect the device for obvious damage. Return damaged products.

Requirements

• Tools (not provided):

Volt-ohm Meter (VOM)

Appropriate screwdriver for mounting screws and terminal connections

• Training: Installer must be a qualified, experienced technician.

WARNING

• Avoid locations where excessive moisture, corrosive fumes or vibration are present.

• Make all connections in accordance with the wiring table (Table-1) and in accordance with

national and local electrical codes. Use No. 18 AWG or larger copper conductors only.

CAUTION

• Do not exceed ratings of the device.

+ 2 hidden pages