Samsung WS32Z44V, WS32M64V, WS32M64N, WS32A114V, WS28Z44V User Manual [en, en, cs, de]

COLOUR

TELEVISION

Owner’s Instructions

Before operating the unit, please read this manual thoroughly,

and retain it for future reference.

REMOTE CONTROL

ON-SCREEN MENUS

TELETEXT FUNCTION

Safety Instructions

ENG

The following illustrations represent the precautions to be taken when using and moving your television.

10%	35°	75%
H	5°	H

Do NOT expose the television to extreme temperature conditions (below 5°C and above 35°C) or to extreme humidity conditions (less than 10% and more than 75%).

Do NOT expose the television to direct sunlight.

Do NOT expose the television to any liquids.

If the television is broken, do not try to repair it yourself. Contact qualified service personnel.

During a storm conditions (especially when there is lightning) unplug the television from the mains socket and aerial.

If the remote control is not used for a long period of time, remove the batteries and store it in a cool, dry place.

THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS

Caution

								The lightning flash and arrow head
				CAUTION		!		within the triangle is a warning sign
				RISK OF ELECTRIC SHOCK				alerting you of “dangerous voltage”
								inside the product.
				DO NOT OPEN
		CAUTION: TO PREVENT ELECTRICAL				SHOCK, DO		The exclamation point within the	!
		NOT REMOVE REAR COVER, NO USER				SERVICEABLE
								triangle is a warning sign alerting
		PARTS INSIDE. REFER SERVICING TO QUALIFIED
								you of important instructions
		SERVICE PERSONNEL.
								accompanying the product.
			Main voltage : 220V-240V~, 50Hz					WARNING: TO PREVENT DAMAGE WHICH MAY
			(or Indicated on the rear of the TV set).					RESULT IN FIRE OR SHOCK HAZARD. DO NOT EXPOSE
								THIS APPLIANCE TO RAIN OR MOISTURE.

2

			Contents
	PREPARING YOUR TELEVISION				ENG
	■	Safety Instructions ..............................................................................................................			2
	■	Caution ...............................................................................................................................			2
	■	Front Panel Controls...........................................................................................................			4
	■	Connection Panels..............................................................................................................			5
	■	Infrared Remote Control .....................................................................................................			6
	■	Inserting the Batteries in the Remote Control.....................................................................			7
	■	Connecting the Aerial (or Cable Television Network) .........................................................			7
	■	Switching Your Television On and Off ................................................................................			8
	■	Placing Your Television in Standby mode ..........................................................................			8
	■	Plug and Play Feature ........................................................................................................			9
	■	Viewing the Demonstration.................................................................................................			10
	■	Choosing Your Language ...................................................................................................			10
SETTING UP THE CHANNELS
	■	Storing the Channels Automatically....................................................................................			11
	■	Storing the Channels Manually...........................................................................................			12
	■	Giving Channels Names .....................................................................................................			14
	■	Skipping Unwanted Channels.............................................................................................			15
	■	Fine tuning Channel Reception ..........................................................................................			16
	■	Sorting the Stored Channels...............................................................................................			17
	USING THE TELEVISION
	■	Changing the Picture Standard...........................................................................................			18
	■	Adjusting the Picture Settings.............................................................................................			19
	■	Selecting the Picture Format ..............................................................................................			19
	■	Activation/Deactivation the Digital Noise Reduction Feature..............................................			20
	■	Using the Tilt Control Feature (Option)...............................................................................			20
	■	Freezing the Current Picture (Option).................................................................................			21
	■	Changing the Sound Standard ...........................................................................................			21
	■	Adjusting the Sound Settings..............................................................................................			22
	■	Extra Sound Settings ..........................................................................................................			23
	■	Selecting the Sound Mode..................................................................................................			24
	■	Selecting the Turbo Sound .................................................................................................			25
	■	Adjusting the Volume..........................................................................................................			25
	■	Switching the Sound Off Temporarily .................................................................................			25
	■	Setting the Sleep Timer ......................................................................................................			26
	■	Setting and Displaying the Current Time ............................................................................			27
	■	Switching the Television On and Off Automatically ............................................................			28
	■	Setting the Blue Screen Mode ............................................................................................			29
	■	Activating the Childlock.......................................................................................................			29
USING THE TELETEXT FUNCTION
	■	Teletext Decoder ................................................................................................................			30
	■	Displaying Teletext Information ..........................................................................................			31
	■	Selecting a Specific Teletext Page .....................................................................................			32
	■	Using FLOF to Select a Teletext Page ...............................................................................			33
	■	Storing Teletext Pages .......................................................................................................			33
INFORMATION ON CONNECTIONS AND RECOMMENDATIONS FOR USE
	■	Connecting to the AV-1 or 2 SCART Input/Outputs............................................................			34
	■	Connecting to the Audio Out RCA Output (Option) ............................................................			34
	■	Connecting to the RCA Input (AV2)....................................................................................			35
	■	Connecting to the Rear S-VIDEO Input (Option) ................................................................			35
	■	Connecting Headphones ....................................................................................................			36
	■	Viewing Picture From External Sources .............................................................................			36
	■	Automatic Degaussing to Remove Colour Patches............................................................			37
	■	Wiring the Mains Power Supply Plug (UK Only).................................................................			37
	■	Trouble Shooting: Before Contacting Service Personnel ...................................................			38
Symbols
		Press	Important	Note

3

Front Panel Controls

	ENG	These figures show typical panels. The actual configuration on your TV
		may be different, depending on your model.

TV/VIDEO

STAND-BY/TIMER

SELECTION

VOLUME ADJUSTMENT

INDICATOR

POWER

MENU DISPLAY

CHANNEL SELECTION REMOTE CONTROL SENSOR

CHANNEL SELECTION

STAND-BY INDICATOR

POWER

VOLUME ADJUSTMENT

MENU DISPLAY

REMOTE CONTROL SENSOR

Using the Front Panel Controls

If the remote control stops working, you can use the front-panel controls to:

Change channels

Adjust the volume

Select options from the on-screen menus

Choose the Video mode

How to use the ▲/▼ buttons to switch among Video input ( ) modes (the model without TV/VIDEO button):

	... 99	→ 0 →	1 →	2 → 1 → 2 ...
	... 2 → 1 →		1 →	2 → 0 → 99 ...
	... 99	↔ 0 ↔	↔ 1 ↔ 2 ...

The control-symbols on the TV front panel are the same as the ones used on the remote control.

4

Connection Panels

	These figures show typical connector-jack panels. The actual	ENG
	configuration on your TV may be different, depending on your model.

Side of TV

RCA AUDIO/VIDEO

INPUT CONNECTORS

S-VIDEO JACK

HEADPHONE JACK

RCA AUDIO/VIDEO INPUT CONNECTORS

HEADPHONE JACK

Front of TV

HEADPHONE JACK

RCA AUDIO/VIDEO INPUT CONNECTORS

Rear of TV

75 Ω COAXIAL CONNECTOR

FOR AERIAL/CABLE NETWORK

RCA MONITOR OUTPUT CONNECTORS (OPTION)

SCART AUDIO/VIDEO

INPUT/OUTPUT CONNECTORS

5

Infrared Remote Control

ENG

POWER

PICTURE MENU DISPLAY

AUTOMATIC SWITCH-OFF/

TELETEXT STORE

STILL PICTURE (OPTION)

ONE/TWO-DIGIT CHANNEL SELECTION/ TELETEXT HOLD

FASTEXT TOPIC SELECTION

TURBO SOUND ON/OFF

TEMPORARY SOUND SWITCH-OFF

SOUND MENU DISPLAY

TELETEXT DISPLAY/MIX

DIRECT CHANNEL SELECTION

TUNER/CABLE NETWORK SELECTION

EXTERNAL INPUT SELECTION/ TELETEXT LIST/FLOF MODE SELECTION

ON-SCREEN DISPLAY/ TELETEXT REVEAL

SOUND MODE SELECTION (STEREO/MONO/DUAL-I/II)/ TELETEXT SUB-PAGE

PICTURE STANDARD

PICTURE SIZE/

TELETEXT SIZE

SOUND STANDARD

NEXT CHANNEL/

TELETEXT NEXT PAGE

VOLUME DECREASE

VOLUME INCREASE

PREVIOUS CHANNEL/

TELETEXT PREVIOUS PAGE

VCR CONTROLS

Operation of remote control may be affected by bright artificial light near to the TV set.

6

Inserting the Batteries in the Remote Control

ENG

You must insert or replace the batteries in the remote control when you :

Purchase the television.

Find that the remote control is no longer operating correctly.

1Remove the cover of the remote control by pressing the symbol ( PRESS ) and pulling the cover in the direction of the arrow.

		S
	S
E
R
P

2 Insert batteries, taking care to respect the polarities:

+ on the battery with + on the remote control- on the battery with - on the remote control

3 Replace the cover by pushing it in the direction of the arrow.

		S
	S
E
R
P

Connecting the Aerial (or Cable Television Network)

To view television channels correctly, a signal must be received by the set from one of the following sources:

An outdoor aerial

A cable television network

Plug the aerial or cable network input cable to the 75Ω coaxial socket on the rear of the television.

	Cable
	Television
Rear of TV	Network

7

Switching Your Television On and Off

ENG

The mains lead is attached to the rear of the television.

If you have purchased this television in the United Kingdom,

	refer to rear cover for further instructions on plug wiring.
1	Plug the mains lead into an appropriate socket.
	Use a wall socket with a voltage of between 220 and

240 Volts.

2Press the “ (ON/OFF)” button on the front of the television. Result: The Standby indicator lights up on the front panel.

3Press the POWER button on the remote control to switch the television on.

Result: The programme that you were watching last is reselected automatically.

4	To switch your television off, press the “ (ON/OFF)”	button again
	on the front of the television.

Placing Your Television in Standby mode

Your television can be placed in Standby mode, in order to reduce:

Power consumption

Wear of the cathode ray tube

The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

The television is placed automatically in Standby mode when you turn it on.

1Press the POWER button on the remote control.

Result: The screen is turned off and the Standby indicator on the front of the television lights up.

2To switch the screen back on, simply press the POWER button again on the remote control.

Do not leave your television in standby mode for long periods of time (when you are away on holiday, for example). In this case, you should switch it off completely.

8

Plug & Play Feature

When the television is initially powered ON, three basic customer settings proceed automatically and subsequently: setting the language, channel and clock.

1If the television is in Standby mode (red light visible on the television front panel), press the POWER button on the remote control.

Result: The message “Plug & Play” is displayed. It flickers for a little while and then the “Language” menu is automatically displayed.

2Press the ▲ or ▼ button to select required language. Press the MENU button to enter the language, and then the message “Ant. Input Check” is displayed.

If any language is not selected on the “Language” menu, the “Language” menu will be displayed about 30 seconds later.

3Make sure that the antenna is connected to the TV. And then press the + or – button.

Result: The “Auto store” menu is displayed.

4Select your country by pressing the + or – button. To search the channels, select the “Search” by pressing the ▲ or ▼ button, and then press the + or – button (refer to “Storing the Channels Automatically” on page 11). Press the MENU button to skip.

Result: The “Time” menu is displayed.

5Press the + or – button to move to the hour or minute. Set the hour or minute by pressing the ▲ or ▼ button (refer to “Setting and Displaying the Current Time” on page 27).

6When you have finished, press the MENU button.

Result: The message “Enjoy your watching” is displayed, and then the channel which has been stored will be activated.

7If you want to reset this feature...

1 Press the MENU button.

2 Press the ▲ or ▼ button to select the “Function”, and then press the + or – button.

3Select the “Plug & Play” by pressing the ▲ or ▼ button, and then press the + or – button.

Result: The message “Plug & Play” is displayed.

ENG

Plug & Play

Ant. Input Check

Select

Exit

Auto store

Country : Others

Search : -/+

		Select	Adjust	Exit
				Time
		Clock	: --	: --
		Timer	: Off

		Select		Enter	Exit
				Function
		Language
		Time
		Plug & Play
		Blue screen			: Off
		Childlock			: Off
		Demonstration
		Select		Enter	Exit
				Function
		Language
		Time
		Plug & Play
		Blue screen			: Off
		Childlock			: Off
		Demonstration
		Select		Enter	Exit

9

Viewing the Demonstration

ENG

					Picture
		Mode			Custom
		Adjust
		Digital NR			: Off
		Tilt			: 0
		Select		Enter	Exit
				Function
		Language
		Time
		Plug & Play
		Blue screen			: Off
		Childlock			: Off
		Demonstration
		Select		Enter	Exit
				Function
		Language
		Time
		Plug & Play
		Blue screen			: Off
		Childlock			: Off
		Demonstration
		Select		Enter	Exit

To become familiar with the various menus provided by your television, you can view the inbuilt demonstration.

1Press the MENU button.

2Press the ▲ or ▼ button to select the “Function” and press the + or

– button.

3Press the ▲ or ▼ button to select the “Demonstration” and press the + or – button.

Result: Each of the menu options is displayed in turn.

4When you wish to stop the demonstration, press any button on the remote control.

Choosing Your Language

				Function
		Language
		Time
		Plug & Play
		Blue screen			: Off
		Childlock			: Off
		Demonstration
		Select		Enter	Exit
				Function
		Language
		Time
		Plug & Play
		Blue screen			: Off
		Childlock			: Off
		Demonstration

When you start using your television for the first time, you must select the language which will be used for displaying menus and indications.

1Press the MENU button.

2Press the ▲ or ▼ button to select the “Function”.

3Press the + or – button to select the “Language”.

4Select a particular language by pressing the ▲ or ▼ button repeatedly.

5When you have finished, press the TV button or, press the MENU button repeatedly to return to normal viewing.

Select

Adjust

Exit

10

Storing the Channels Automatically

You can scan the frequency ranges available on your television and in your country and store all the channels found automatically.

The channels are stored in the order in which they appear in the frequency bands. It is possible that the automatically allocated numbers may not correspond to those by which you wish to identify the channels. If this is the case, refer to “Sorting the Stored Channels” on page 17.

1Press the MENU button.

2Press the ▲ or ▼ button to select the “Channel”.

3Press the + or – button to select the “Auto store”.

4Press the + or – button again.

Result: The “Auto store” menu is displayed with the “Country” selected.

5Select your country by pressing the + or – button. The following countries are available: Belgie - Deutschland - Espania - France - Italia - Nederland - Schweiz - Sverige - UK - East europe - Others.

6Press the ▲ or ▼ button to select the “Search” and press the + or

– button.

Result: The horizontal bar is displayed, and then channels are stored in an order which reflects their positions in the frequency range. Finally, the search will end automatically.

7When searching and storing is complete, the “Sort” menu is displayed.

For ATS areas, the “Auto sort” menu will appear on the screen after the searching and storing, and then the channels will be automatically sorted by name.

The “Sort” menu will not be entered. (see the note on the bottom of page 12).

	To...	Then...
	Sort the stored channels	Go to Step 4 of the “Sorting
	into the desired numerical order	the Stored Stations”
		procedure on page 17.
	Exit the channel store function	Press the MENU button
	without sorting the channels	repeatedly until the menus
		disappear.

ENG

Channel

Auto store

Manual store

Name

Add/Erase

Fine tune

Sort

Select

Enter

Exit

Auto store

Country : Others

Search : -/+

Select

Adjust

Exit

Auto store

Country : Others

Search : -/+

Select

Search

Exit

P 8	C25		-----
426	MHz		22 %

Exit

			Sort
		From	: P 1 -----
		To	: P-- -----
		Store	: ?

Select

Adjust

Exit

11

Storing the Channels Manually

ENG

				Channel
		Auto store
		Manual store
		Name
		Add/Erase
		Fine tune
		Sort
		Select		Enter	Exit
				Channel
		Auto store
		Manual store
		Name
		Add/Erase
		Fine tune
		Sort
		Select		Enter	Exit
				Manual store
		Colour system			: Auto
		Sound system			: BG
		Search			: 138MHz
		Channel			: S 6
		Prog.No.			: P12 -----
		Store			: ?
		Select		Adjust	Exit
				Manual store
		Colour system			: Auto
		Sound system			: BG
		Search			: 138MHz
		Channel			: S 6
		Prog.No.			: P12 -----
		Store			: ?
		Select		Adjust	Exit

When storing channels manually, you can choose:

Whether or not to store each of the channels found.

The number by which you wish to identify each stored channel.

1Press the MENU button.

2Press the ▲ or ▼ button to select the “Channel” and press the + or

– button.

3Press the ▲ or ▼ button to select the “Manual store” and press the + or – button.

Result: The “Manual store” menu is displayed with the “Colour system” selected.

4Press the + or – button repeatedly until the color is of the best quality.

Result: The “Color system” is changed.

Auto ↔ PAL ↔ SECAM ↔ NT4.43

NT4.43 is a “trick” playback mode used by special VCR’s to play PAL-recorded videos in NTSC mode.

5Press the ▲ or ▼ button to select the “Sound system” and press the + or – button repeatedly until the sound is of the best quality.

Result: The “Sound system” is changed.

BG ↔ DK ↔ I ↔ L (option)

After a frequency is searched, the name of broadcaster is automatically stored in memory.

12