Samsung PS50C451B2D, PS50C450B1M, PS42C450B1M, PS42C451, PS42C451B2D User Manual

Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country
AUSTRALIA 1300 362 603 www.samsung.com
New zealand 0800 SAMSUNG (0800 726 786) www.samsung.com
CHINA 400-810-5858
HONG KONG (852) 3698-4698 www.samsung.com/hk
INDIA 3030 8282
INDONESIA 0800-112-8888
JAPAN 0120-327-527 www.samsung.com
MALAYSIA 1800-88-9999 www.samsung.com
PHILIPPINES 1-800-10-SAMSUNG(726-7864)
SINGAPORE 1800-SAMSUNG(726-7864) www.samsung.com
THAILAND 1800-29-3232
TAIWAN 0800-329-999 www.samsung.com
VIETNAM 1 800 588 889 www.samsung.com
Customer Care Centre
010-6475 1880
1800 110011 1800 3000 8282 1800 266 8282
021-5699-7777
1-800-3-SAMSUNG(726-7864) 1-800-8-SAMSUNG(726-7864) 02-5805777
02-689-3232
Web Site
www.samsung.com
www.samsung.com/hk_en/
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
Plasma TV
user manual
imagine the possibilities
Thank you for purchasing this Samsung product. To receive more complete service, please register your product at
www.samsung.com/register
Model _____________ Serial No. _____________
BN68-02574A-00
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice.
User Instructions
Screen Image retention
Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the plasma monitor panel for more than 2 hours
as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
Heat on the top of the Plasma TV
The top side of the product may be hot after long period of use as heat dissipates from the panel through the vent hole in the upper part of the
product. This is normal and does not indicate any defect or operation failure of the product. However, children should be prevented from touching the upper part of the product.
The product is making a “cracking” noise.
A “cracking” noise may occur when the product contracts or expands due to a change in the surrounding environment such as temperature or
humidity. This is normal and not a defect of the unit.
Cell Defects
The PDP uses a panel consisting of 2,360,000(HD-level) to 6,221,000(FHD-level) pixels which require sophisticated technology to produce. However,
there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
Avoid operating the TV at temperatures below 41°F (5°C)
A still image displayed too long may cause permanent damage to the PDP Panel. Watching the Plasma TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and centre of
the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause similar effects to the screen. Damages caused by the above effect are not covered by the Warranty.
After-images on the Screen.
Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the “brightness” and “contrast” when displaying still images for a long time.
Warranty
Warranty does not cover any damage caused by image retention. Burn-in is not covered by the warranty.
Securing the Installation Space
Keep the required distance between the product and other objects (e.g. walls) to ensure proper ventilation. Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
When using a stand or wall-mount, use parts provided by Samsung Electronics only.
If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
x
The appearance may differ depending on the product.
Installation with a stand. Installation with a wall-mount.
2
10 cm
English
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
Contents
Getting Started
4
Connections
7
Basic Features
9
Advanced Features
20
Other Information
30
4 Accessories 4 Viewing the Control Panel 5 Viewing the Remote Control 6 Connecting to an Antenna 6 Plug & Play (Initial Setup)
7 Connecting to an AV Device 8 Connecting to an Audio Device 8 Changing the Input Source
9 How to Navigate Menus 9 Using the INFO button (Now & Next guide) 9 Planning Your Viewing 11 Channel Menu 12 Picture Menu 15 Sound Menu 17 Setup Menu 19 Support Menu
20 Connecting to a PC 21 Media Play 27 Anynet+
ENGLISH
30 Analogue Channel Teletext Feature 31 Installing the Wall Mount 32 Securing the TV to the wall 33 Troubleshooting 36 Specifications 37 Index
This function can be used by pressing the
TOOLS button on the remote control.
Check the Symbol!
Note One -Touch Button
Indicates additional information. Check here for instructions on how to open
the relevant submenu within the OSD (on
screen display).
English
3
Getting Started
Accessories
Please make sure the following items are included with your PDP TV. If any items are missing, contact your dealer.
The items’ colours and shapes may vary depending on the models.
y Remote Control & Batteries (AAA x 2) y Owner’s Instructions y Warranty Card / Safety Guide (Not available in some locations)
y Blanking Bracket y Ferrite Core for Power Cord (2EA)
Ferrite Core for Power Cord: The ferrite cores are used to shield the cables from interference. When connecting a cable, open the ferrite core and clip it around the cable near the plug as shown in the figure.
Distance between the ferrite core and one end of the cord put into the TV set
x
y A : below 50 mm y B : below 20 mm
A
B
y Cleaning Cloth y Power Cord
(50-Inch only)
Viewing the Control Panel
The product colour and shape may vary depending on the model.
Power Indicator
Speakers
SOURCE
MENU Displays an on-screen menu, the OSD (on screen display) of your TV’s features.

Power Indicator Blinks and turns off when the power is on and lights up in standby mode.
Remote control sensor Aim the remote control towards this spot on the TV.
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
(Power)
Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTER button on the remote control.
Adjusts the volume. In the OSD, use the and buttons on the remote control.
Changes the channels. In the OSD, use the and buttons on the remote control.
Turns the TV on or off.
Remote control sensor
buttons as you would use the
buttons as you would use the
4
English
Viewing the Remote Control
01 Getting Started
Turns the TV on and off.
Have direct access to channels.
Alternately selects Teletext, Double or Mix.
Adjusts the volume.
Opens the OSD.
Displays Media Play (USB) (p. 21).
Quickly select frequently used functions.
Returns to the previous menu.
These buttons are for the Channel
Manager, Media Play (USB) menu, etc.
Use these buttons in Media Play
(USB) and Anynet+ (HDMI-CEC)
(
: Controls recording for Samsung
recorders that have the Anynet+
modes (p. 21, 27).
feature)
SOURCE
TTX/MIX
CH LIST
MEDIA.P
RETURN
A B C D
P.MODE
S.MODE DUAL
AD P.SIZE
INFO
SUBT.
Displays and selects the available video sources (p. 8).
Returns to the previous channel.
To mute all TV output sound
Changes channels.
Displays channel lists on the screen (p. 11).
Displays the EPG (Electronic Programme Guide). (p. 9)
Displays information on the TV screen.
Selects the on-screen menu items and changes the values seen on the menu.
Exits the menu.
ΕΧΙΤ
P.MODE: Press to select the picture
mode (p. 12).
S.MODE: Press to select the sound
mode (p. 15).
DUAL -: Sound effect selection
(p. 16).
AD: Turns the audio description on
and off (not available in some locations) (p. 16).
P.SIZE: Selects the picture size (p. 13). SUBT.: Displays digital subtitles (p. 18).
Installing batteries (Battery size: AAA)
NOTE
Use the remote control within 23 feet from TV.
x
Bright light may affect the per formance of the remote
x
control. Avoid to use nearby special fluorescent light or neon sign.
The colour and shape may vary depending on the model.
x
English
5
Getting Started
POWER
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
Preset: Connecting the power cord and antenna.
VHF/UHF Antenna
Cable
or
Power Input
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER button. Plug & Play is available only when the Input source is set to TV.
To return to the previous step, press the Red button.
Selecting Store Demo
1
or Home Use
Selecting a country
2
Selecting a channel
3
source Selecting a channel
4
Setting the Clock
5
Mode
Time zone
6
Viewing the HD
7
Connection Guide. Enjoy your TV.
Press the or button, then press the ENTER
y Select the Home Use mode. Store Demo Mode is for retail
environments.
y To return the unit’s settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you see the
volume OSD, press and hold MENU for 5 sec. Press the or button, then press the ENTER Select the appropriate country. If the desired country does not exist on
the menu, select Others. Press the or button, then press the ENTER
Digital or Analogue. Press the or button, then press the ENTER Select the channel source to memorise. For more information, refer to Channel Auto
Store (p. 11).
Press the ENTER button at any time to interrupt the memorization process. Set the Clock Mode automatically or manually.
y Auto: Allows you to select time zone. y Manual: Allows you to manually set the current date and time.
Press the or button to highlight the time zone for your local area. Press the ENTER
The connection method for the best HD screen quality is displayed.
Press the ENTER
button (Australia only).
button.
button.
button.
button. Select Digital & Analogue,
button.
ANT OUT
P
8
If You Want to Reset This Feature...
Select Setup - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.” If you want to change the PIN number, use the Change PIN function.
English
6
Connections
Connecting to an AV Device
Using an HDMI or HDMI/DVI cable: HD connection (up to 720p/1080i)
Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver, cable box, STB satellite receiver
02 Connections
W
R
DVD /
Blu-ray player
Red White
HDMI OUT
DVD /
Blu-ray player
DVI OUT
AUDIO OUT
W R
HDMI IN 1(DVI), 2, 3, PC/DVI AUDIO IN
When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack. For the DVI cable
x
R-AUDIO-L
connection, use a DVI to HDMI cable or DVI-HDMI (DVI to HDMI) adapter for video connection and the PC/DVI
AUDIO IN jacks for audio.
If an external device such as a DVD / Blu-ray player / cable box / STB satellite receiver supporting a HDMI
x
versions older than 1.3 is connected, the T V may operate abnormally (e.g. no screen display / no sound / annoying flicker / abnormal colour).
If there is no sound after connecting an HDMI cable, check the HDMI version of the external device. If you
x
suspect the version is older than 1.3, contact the provider of the device to confirm the HDMI version and request an upgrade.
It is recommended you purchase an HDMI-certified cable. Otherwise, the screen may appear blank or a
x
connection error may occur.
Using a Component (up to 720p/1080i) or Audio/Video (480i only) Cable
Available devices: VCR, DVD, Blu-ray player, cable box, STB satellite receiver
R
W
W
Red
White
R GB
Red
Blue Green
DVD / Blu-ray player
To obtain the best picture quality, the Component connection is recommended over the A/V connection.
R
R
AUDIO OUT
R-AUDIO-L
W
R GB
R B G
COMPONENT OUT
PR PB Y
R W
Red
White
VCR
Y
Yellow
AUDIO OUT
R-AUDIO-L
WR
WR
Y
Y
VIDEO OUT
English
7
Connections
SOURCE
Connecting to an Audio Device
Using an Optical (Digital) or Headphone Connection
Available devices: digital audio system, amplifier, DVD home theatre
OPTICAL
DIGITAL AUDIO OUT (OPTICAL)
When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume
x
of both the TV and the system.
5.1 CH (channel) audio is available when the T V is connected to an external device supporting 5.1 CH.
x
When the receiver (amplifier or DVD home theatre) is set to on, you can hear sound output from the TV’s
x
optical jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the amplifier or DVD home theatre. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is connected to the T V via HDMI, only 2 CH audio will be heard from the amplifier or DVD home theatre. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theatre.
Headphones : You can connect your headphones to the headphones output on your set. While the headphones are connected, the sound from the built-in speakers will be disabled.
Sound function may be restricted when connecting headphones to the TV.
x
Headphone volume and TV volume are adjusted separately.
x
digital audio system
Input Cables (Sold Separately)
HDMI HDMI-DVI Component Composite (AV) Coaxial (RF) VGA
Changing the Input Source
Source List
Use to select TV or an external input sources such as a DVD / Blu-ray player / cable box / STB satellite receiver.
TV / AV / Component1 / Component2
/ PC / HDMI1/DVI / HDMI2 / HDMI3 / USB
In the Source List, connected inputs will be highlighted.
PC always stay activated.
English
8
Edit Name
■ VCR / DVD / Cable STB / Satellite STB / PVR STB /
AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name
the device connected to the input jacks to make your input source selection easier.
When connecting an HDMI/DVI cable to the HDMI IN
1(DVI) port, you should set to DVI PC or DVI Devices
mode under Edit Name.
Basic Features
INFO
SOU
RCE
C
H LI
ST
TTX/MI
X
How to Navigate Menu
Before using the TV, follow the steps below to learn how to navigate the menu and select and adjust different functions.
1
2
3 4
1 MENU button: Displays the main on-screen menu. 2 ENTER
select an item. Confirm the setting.
3 RETURN button: Returns to the previous menu. 4 EXIT button: Exits the on-screen menu.
How to Operate the OSD (On Screen Display)
The access step may differ depending on the selected menu.
MENU
1
/ Select an icon with the or
2
ENTER
3
/
4
/
5
ENTER
6
EXIT
MEDIA.P
RETURN
/ Direction button: Move the cursor and
The main menu options appear on
ΕΧΙΤ
the screen:
Picture, Sound, Channel, Setup, Input, Application, Support.
button.
Press ENTER to access the sub-menu.
Select the desired submenu with the or button.
Adjust the value of an item with the or button. The adjustment in the OSD may differ depending on the selected menu.
Press ENTER to complete the configuration.
Press EXIT.
7
Using the INFO button (Now & Next guide)
The display identifies the current channel and the status of certain audio-video settings.
The Now & Next guide shows daily TV programme information for each channel according to the broadcasting time.
y Scroll , to view information for a
desired programme while watching the current channel.
y Scroll , to view information for other channels. If you
want to move to the currently selected channel, press the ENTER
DUWH
DTV
All
350
button.
Karl de r GroBe (2/ 3)
Dual
576i
Spiefilm Fr ankreich / It alien 1994 “Ka rl der GroBe” war der Wegber eiter Europas, De r abenteuerli che dreiteilig e Fernsehfilm widmet sich de m ...
|
4:3
SD
Multi | Movie
4:45 - 6:20
INFO
5:46 Su n 2 May
E
Watch
Informat ion
Planning Your Viewing
Guide
(Australia & Singapore Only) The EPG (Electronic Programme Guide)
information is provided by broadcasters. Using programme schedules provided by broadcasters, you can specify programmes you want to watch in advance so that the channel automatically changes to the selected programme channel at the specified time. Programme entries may appear blank or out of date depending on a channel status.
Using Channel View
Guide
DTV Air 800 five
Home and Away 18:00 - 18:30
Drama
800 five
Channel View - All
Today 18:00 - 19:00 19:00 - 20:00
27 28 800 24 16 6
Dani is devastated when scott makes clear his views on marriage...
Discovery DiscoveryH&L five price-drop.tv QVC R4DTT
View Mode +24 Hours Ch. Mode  Information  Page
1 2 3 4 5 6
American Chopper
Programmes resume at 06:00 Home and... No Information QVC Selection No Information
)
Family Affairs
Tine Team
Fiv...
)
GUIDE
2:10 Tue 1 Jun
Dark Angel

Watch
02 Connections
English
9
Basic Features
B
B
Using Scheduled View
Guide
Family Affairs
) )
Dark Angel
800 800
View Mode
1 6
button again and
DTV Air 800 five
Family Affairs 18:00 - 18:30
Drama
10 TEN Digital
Scheduled View
18:30 19:15
1
Red (View Mode): View the list of programmes that
Tanya confesses all to a stunned Babs. Conrad is anxious to hear...
Wed 29 Jul Thu 24 Dec
are playing now or coming up.
2
Yellow (+24 Hours): Viewing the list of programmes to
be broadcasted after 24 hours.
3
Blue (Ch. Mode): Select the type of channels you want to display on the Channel View window. (All, TV, Radio, Data/Other, My Channel 1~4)
4 Information: Displays details of the selected
programme.
5
(Page): Move to next or previous page.
6 ENTER
button
– When selecting the current programme, you can
watch the selected programme.
– When selecting the future programme, you can
reserve to watch the selected programme. To cancel the schedule, press the ENTER select Cancel Schedules.
2:10 Tue 1 Jun
five five

Cancel
 Seeing Channels
Channel Manager
Delete or set favourites channels. Select a channel in the Channels, My Channels or Scheduled screen.
Channels
All
TV Radio Data/Other Analogue
Zoom Select Sort  Page
Channels: Shows the channel list according to
channel type.
My Channels: Shows the group of the channel.
Scheduled: Shows all the currently reserved
programmes.
Using the colour buttons with the Channel Manager
Green (Zoom): Enlarges or shrinks a channel
x
number.
Yellow (Select): Selects multiple channel lists.
x
Select desired channels and press the Yellow button to set all the selected channels at the same time. The
mark appears to the left of the selected channels.
Blue (Sor t): Change the list ordered by channel
x
name or channel number.
(Page): Move to next or previous page.
x
(Tools): Displays the Channel Manager option
x
menu. (The options menus may differ depending on the situation.)
Channel Status Display Icons
358 ORF1 359 ORF2 0
360 ORF2 S
361 * BBC World 728 \ bid-up.tv c729 Boonerang
A
1 C1
A
2 C2

Tools
r
Icons Operations
An analogue channel.
A channel selected.
A channel set as a Favourite.
A programme currently being broadcast.
A locked channel.
A reserved programme.
English
10
 Using Favourite Channels
CH LIST
B
Channel Menu
03 Basic Features
My Channels
(in Channel Manager) Shows all favourite channels.
Edit My Channels channels to desired my channels group.
The “” symbol will be displayed and the channel will be set as a My Channels.
1. Select a channel and press the TOOLS button.
2. Add or delete a channel in the my channel groups
you want among 1, 2, 3 and 4.
One or more groups can be selected.
x
3. After you have changed the settings, the channel list
for each group can be viewed in My Channels.
Channels
Zoom Select Sort  Page
All
TV Radio Data/Other Analogue
: You can set the selected
358 ORF1 359 ORF2 0
360 ORF2 S
Edit My Channels
Lock
Timer Viewing
361 * BBC World
Edit Channel Number
728 \ bid-up.tv
Delete
c729 Boonerang
Select All
A
1 C1
A
2 C2

Tools
Channel List
You can see all the channels searched.
 Returning Channels
Country
You can change the country. The PIN input screen appears. Enter your 4 digit PIN number.
Auto Store
Scans for a channel automatically and stores in the TV.
Automatically allocated programme numbers may not correspond to actual or desired programme numbers. If a channel is locked using the Child Lock function, the PIN input window appears.
Channel Source (Digital & Analogue / Digital / Analogue): Select the channel source to memorise.
r
Manual Store
Scans for a channel manually and stores in the TV.
Digital Channel (Channel, Frequency, Bandwidth): When scanning has finished, channels are updated in the channel list.
The Bandwidth function is supported in New zealand and Singapore only.
Analogue Channel (Programme, Colour System, Sound System, Channel, Search): If there is abnormal sound or no sound, reselect the sound standard required.
Channel mode
P (programme mode): When tuning is complete,
x
the broadcasting stations in your area have been assigned to position numbers from P0 to P99. You can select a channel by entering the position number in this mode.
C (aerial channel mode) / S (cable channel mode):
x
These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel.
 Editing Channels
Channel Manager Option Menu (in Channel Manager)
1. Select a channel and press the TOOLS button.
2. Edit the channel name or number using the Edit Channel Name or Edit Channel Number menu.
Edit Channel Name (analogue channels only): Assign your own channel name.
Edit Channel Number (digital channels only) (Australia, Singapore only): Edit the number by pressing the number buttons desired.
English
11
Basic Features
 Other Features
Channel Manager
Channel Manager Option Menu Set each channel using the Channels menu options (Lock /
Unlock, Timer Viewing, Sort, Delete, Select All / Deselect All). Option menu items may differ depending on the channel
status.
1. Select a channel and press the TOOLS button.
2. Select a function and change its settings.
Lock / Unlock: Lock a channel so that the channel cannot be selected and viewed.
NOTE
This function is available only when the Child Lock
x
is set to On. The PIN input screen appears. Enter your 4-digit PIN,
x
the default of which is “0-0-0-0.” Change the PIN using the Change PIN option.
Timer Viewing: You can set a desired channel to be displayed automatically at the reserved time. Set the current time first to use this function.
When a digital channel is selected, press the button to view the digital Programme.
Sort (analogue channels only): This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using the auto store.
Delete: You can delete a channel to display the channels you want.
Select All / Deselect All: Select all the channels or deselect all the selected channels in the channel manager.
Scheduled
(in Channel Manager) You can view, modify or delete a show you have reserved to
watch.
Change Info: Change a show you have reserved to watch.
Cancel Schedules: Cancel a show you have reserved to watch.
Information: Display a show you have reserved to watch. (You can also change the reservation information.)
Select All / Deselect All: Select or deselect all reserved programmes.
Edit Channel Number (Disable / Enable)
(New Zealand only) Edit the number by pressing the number buttons desired.
Fine Tune
(analogue channels only) If the signal is weak or distorted, fine tune the channel
manually.
Fine tuned channels are marked with an asterisk “*.”
To reset the fine-tuning, select Reset.
Picture Menu
 Changing the Preset Picture Mode
Mode
Select your preferred picture type.
Dynamic: Suitable for a bright room.
Standard: Suitable for a normal environment.
Movie: Suitable for watching movies in a dark room.
P.MODE
 Adjusting Picture Settings
Cell Light / Contrast / Brightness / Sharpness / Colour / Tint (G/R)
Your television has several setting options for picture quality control.
NOTE
In analogue TV, AV modes of the PAL system, the
x
Tint (G/R) function is not available. In PC mode, you can only make changes to Cell
x
Light, Contrast and Brightness. Settings can be adjusted and stored for each
x
external device connected to the TV.
12
English
Loading...
+ 26 hidden pages