Samsung PS42B451B User Manual [ru]

удивительные возможности

Благодарим за приобретение продукта компании Samsung. Для получения более полного обслуживания зарегистрируйте свое устройство по адресу:

www.samsung.com/register

Модель_______Серийный номер_________

Связывайтесь с SAMSUNG по всему миру

Если у вас есть предложения или вопросы по продуктам Samsung, связывайтесь с информационным центром Samsung.

Country

Customer Care Centre 

Web Site

RUSSIA 8-800-555-55-55 www.samsung.ru

UKRAINE 8-800-502-0000 www.samsung.ua

Плазменный

телевизор

руководство пользователя

PS42B450B PS42B451B PS50B450B PS50B451B

BN68-01936F-Rus.indb 1 2009-2-25 20:22:23

BN68-01936F-00

English - 2

User Instructions

Screen Image retention

Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the plasma monitor panel for more than 2 hours as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.

Height

The PDP can normally operate only under 2000m in height. It might abnormally function at a place over 2000m in height so do not install and operate there.

Heat on the top of the PDP TV

The top side of the product may be hot after long period of use as heat dissipates from the panel through the vent hole in the upper part of the product. This is normal and does not indicate any defect or operation failure of the product. However, children should be prevented from touching the upper part of the product.

The product is making a ‘cracking’ noise.

A ‘cracking’ noise may occur when the product contracts or expands due to a change of surrounding environment such as temperature or humidity. This is normal and not a defect of the unit.

Cell Defects

The PDP uses a panel consisting of 2,360,000(HD-level) to 6,221,000(FHD-level) pixels which require sophisticated technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

Avoid operating the TV at temperatures below 5°C(41°F)

A still image displayed too long may cause permanent damage to the PDP Panel.

Watching the PDP TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and centre of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause similar effect to the screen. Damages caused by the above effect are not covered by the Warranty.

Afterimage on the Screen.

Displaying still images from Video games and PC for longer than a certain period of time may produce partial afterimages. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

Warranty

Warranty does not cover any damage caused by image retention. Burn-in is not covered by the warranty.

Installation

Be sure to contact an authorized service centre, when installing your set in a location with heavy dust, high or low temperatures, high humidity, chemical substance and where it operates continually such as the airport, the train station etc. Failure to do so may cause a serious damage to your set.

Digital TV (DVB-T) Notice

1. Functionalities related to Digital TV(DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC)

digital terrestrial signals are broadcasted or where you have access to a compatible DVB-C(MPEG2 and MPEG4 AAC) cable-TV service. Please check with your local dealer the possibility to receive DVB-T or DVB-C signal.

2. DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB-C is that for the broadcast transmission of digital TV over cable. However, some differentiated features like EPG (Electric Program Guide), VOD (Video on Demand) and so on, are not

included in this specication. So, they cannot be supported at this moment.

Although this TV set meets the latest DVB-T and DVB-C standards[August,2008], the compatibility with future DVB-T digital

terrestrial and DVB-C digital cable broadcasts cannot be guaranteed.

Some cable-TV providers may charge an additional fee for such a service and you may be required to agree to terms and

conditions of their business.

Some Digital TV functions might be unavailable in some countries or regions and DVB-C might not work correctly with all

providers.

For more information, please contact your local Samsung customer care centre.

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. (See back cover for more informations.)



BN68-01936F-Eng-1.indd 2 2009-02-25 오후 9:19:49

English

N O T

Symbol Press Note One-Touch Button TOOLS

English - 3

Contents

Connecting and Preparing Your TV

Checking Parts ..........................................................................4

Using the Stand-Base ...............................................................4

How to assemble the Stand-Base (depending on the model) ...4

Viewing the Control Panel .........................................................5

Viewing the Connection Panel...................................................6

Remote Control .........................................................................8

Installing Batteries in the Remote Control .................................9

Switching On and Off.................................................................9

Placing Your Television in Standby Mode .................................. 9

Viewing the Menus ..................................................................10

Using the TOOLS Button ......................................................... 10

Plug & Play Feature ................................................................ 11

Channel Control

Storing Channels ................................................................... 12

Managing Channels ................................................................15

Picture Control

Changing the Picture Settings ................................................. 17

Using the 3D Function ............................................................. 20

Setting up the TV with your PC ...............................................21

PC Display ............................................................................... 22

Sound Control

Changing the Sound Setting ...................................................23

Selecting the Sound Mode ...................................................... 24

■

Function Description

Conguring the Setup Menu .................................................... 25

Setting the Time ......................................................................27

Source List / Edit Name ........................................................... 28

Supported Program ................................................................. 28

About Anynet+

Connecting Anynet+ Devices .................................................. 29

Setting Up Anynet+ .................................................................30

Scanning and Switching between Anynet+ Devices................ 30

Recording ................................................................................ 31

Listening through a Receiver (Home theater) .........................32

Troubleshooting for Anynet+ ..................................................32

Recommendations for Use

Teletext Feature ....................................................................... 33

Wall Mount Kit Specications (VESA) ..................................... 34

Preparing before installing Wall- Mount on the wall ................35

Securing the TV to the Wall ..................................................... 35

Troubleshooting ....................................................................... 36

Specications ..........................................................................37

■

BN68-01936F-Eng-1.indd 3 2009-02-25 오후 9:19:50

English - 4

Using the Stand-Base

Two or more people should carry the PDP. Never lay the PDP on the oor

because of possible damage to the screen. Always keep the PDP upright. The PDP can rotate 20 degrees in right and left directions.

How to assemble the Stand-Base (depending on the model)

Using the 4 screws for securing the stand base and the monitor, firmly attach the

monitor to the stand base. (The exterior of the set may be different than the picture.)

In case of installing your TV on the wall, close the cover (1) on the stand-base connection part using two screws for hiding.

Warning

Firmly secure the stand to the TV before moving it, as the stand may fall and could cause serious injury.

Two or more people should carry the TV.

Never lay the TV on the oor because of

possible damage to the screen. Always store the TV upright.

-20° ~ 20°

Checking Parts

Owner’s Instructions Remote Control/

AAA Batteries (2ea)

Power Cord Cloth-Clean Warranty Card/

Safety Guide Manual

(Not available in all locations)

Screw (4ea) Cover-Bottom Holder-Ring (4ea)

(Refer to page 35)

Ferrite Core for Power

Cord (1ea)

The ferrite core is used to shield the cable from interference. When connecting a cable, open the ferrite core and clip it around the cable near the plug.

Connecting and Preparing Your TV

BN68-01936F-Eng-1.indd 4 2009-02-25 오후 9:19:51

English - 5

Viewing the Control Panel

The product colour and shape may vary depending on the model.

Front Panel buttons

Touch each button to operate.

SOURCE Toggles between all the available input sources (TV, Ext. AV, PC, Component, HDMI1, HDMI2/DVI, HDMI3).

In the on-screen menu, use this button as you would use the ENTERE button on the remote control.

MENU Press to see an on-screen menu of your TV’s features.

+ –

Press to increase or decrease the volume. In the on-screen menu, use the + – buttons as you would use the

◄ and ► buttons on the remote control.

Press to change channels. In the on-screen menu, use the

CH buttons as you would use the ▲ and ▼ buttons

on the remote control.

POWER INDICATOR

Lights up when the power is on.

(

POWER)

Press to turn the TV on and off.

REMOTE CONTROL SENSOR

Aim the remote control towards this spot on the TV.remote control towards this spot on the TV. control towards this spot on the TV.

SPEAKERS

BN68-01936F-Eng-1.indd 5 2009-02-25 오후 9:19:52

English - 6

Viewing the Connection Panel

Whenever you connect an audio or video system to your set, ensure that all elements are switched off. When connecting an external device, match the colour of the connection terminal to the cable.

N N

The product colour and shape may vary depending on the model.

SERVICE1, 2

Connector for service.

POWER IN

Connect the supplied power cord.

COMPONENT IN

Audio (AUDIO L/R) and video (Y / PB / PR) inputs for

Component.

PC IN(PC) / (AUDIO)

Connect to the video and audio output jack on your PC.

EXT (RGB)

Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.

Input/Output Specification

Connector

Input Output

Video Audio(L/R) RGB Video + Audio(L/R)

EXT

✔ ✔ ✔

Only TV or DTV output

is available.

DIGITAL AUDIO OUT (OPTICAL)

Connect to a Digital Audio Component.

3D SYNC OUT

Connect to 3D IR Emitter.

AUDIO OUT(AUDIO R/L)

Connect RCA audio signals from the TV to an external source, such as Audio equipment.

HDMI IN 1, 2(DVI)

No additional Audio connection is needed for an HDMI to

HDMI connection.

When using an HDMI/DVI cable connection, you must use

the HDMI IN 2 (DVI) jack.

What is HDMI?

High Definition Multimedia interface allows the

transmission of high denition digital video data and

multiple channels of digital audio. The HDMI/DVI terminal supports DVI connection to

an extended device with the appropriate cable (not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio.

DVI AUDIO IN DVI audio outputs for external devices.

ANT IN

75Ω Coaxial connector for Aerial/Cable Network.

Supported modes for HDMI/DVI and Component

480i 480p 576i 576p 720p 1080i 1080p HDMI/DVI 50Hz X X X O O O O HDMI/DVI 60Hz X O X X O O O

Component O O O O O O O

TV Rear Panel

Cable Television

Network

543 8 96

1 7

BN68-01936F-Eng-1.indd 6 2009-02-25 오후 9:19:54

English - 7

COMMON INTERFACE Slot

Insert CI (Common Interface) card into the slot. (refer to page 26)

When not inserting CI CARD in some channels, Scramble Signal is displayed on the screen.

The pairing information containing a telephone number, CI CARD ID, Host ID, and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.

When the channel information conguration has nished, the message Updating Completed is displayed, indicating that the channel list is now updated.

Insert the CI-Card in the direction marked on it.

CAM is not supported in some countries and regions,check with your authorized dealer.

HDMI IN 3

Connect to the HDMI jack of a device with HDMI output.

AV IN (VIDEO, AUDIO L/R)

Video and audio inputs for external devices, such as a camcorder or VCR.

The product colour and shape may vary depending on the model.

TV Side Panel

BN68-01936F-Eng-1.indd 7 2009-02-25 오후 9:19:54

English - 8

Remote Control

You can use the remote control up to a distance of about 23 feet from the TV.

The performance of the remote control may be affected by bright light.

POWER button

(turns the TV on and off)

Selects the TV mode directly.

Number buttons for direct channel

access

Use to select on-screen menu items

Temporary sound switch-off

Volume increase

Volume decrease

Available source selection

Used to display Channel Lists on the

screen

Use to quickly select frequently used

functions.

Control the cursor in the menu

Use to see information on the current

broadcast

Use these buttons in the Channel list,

etc.

Sound mode selection

Use these buttons in the Channel list,

and Anynet+.

Previous channel

Next channel

Previous channel

Displays the main on-screen menu

(

Displays the favourites channel list.

)

Returns to the previous menu

Exit the on-screen menu

Selects SRS TruSurround HD mode.

Picture size selection

Digital subtitle display

Electronic Program Guide (EPG)

display

Teletext Functions

Exit from the teletext display

(depending on the model)

Teletext mode selection (LIST/FLOF)

Teletext store

Teletext size

Teletext reveal

Fastext topic selection

Teletext display/mix both

teletext information and the normal broadcast

Teletext sub page

P :Teletext next page

:Teletext previous page

Teletext index

)

Teletext hold

Teletext cancel

BN68-01936F-Eng-1.indd 8 2009-02-25 오후 9:19:55

English - 9

Installing Batteries in the Remote Control

1. Lift the cover at the back of the remote control upward as shown in the gure.

2. Install two AAA size batteries.

Make sure to match the ‘+’ and ‘–’ ends of the batteries with the diagram inside the compartment.

Close the cover.

Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time.

If the remote control doesn’t work, check the following

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power outage or is the power cord unplugged?

5. Is there a special uorescent light or neon sign nearby?

Switching On and Off

The mains lead is attached to the rear of your set.

Plug the mains lead into an appropriate socket.

The standby indicator lights up on your set.

2. Press the POWERP button on your set.

You also can press the POWERP button or the TV button on the remote control to turn the TV on. The programme that you were watching last is reselected automatically.

3. Press the numeric button (0~9) or channel up / down (< / >) button on the remote control or < CH > button on your set.

When you switch the set on for the very rst time, you will be asked to choose language in which the menus are to be displayed.

To switch your set off, press the POWERP button again.

Placing Your Television in Standby Mode

Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

Press the POWERP button on the remote control.

The screen is turned off and a red standby indicator appears on your set.

2. To switch your set back on, simply press the POWERP, numeric buttons (0~9), TV button or channel up / down (< / >) button again.

Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to unplug the set from the mains and aerial.

BN68-01936F-Eng-1.indd 9 2009-02-25 오후 9:19:55

English - 10

Viewing the Menus

1. With the power on, press the MENU button. The main menu appears on the screen. The menu’s left side has icons: Picture, Sound, Channel, Setup, Input, Application, Support.

2. Press the ▲ or ▼ button to select one of the icons. Then press the ENTERE button

to access the icon’s sub-menu.

Press the EXIT button to exit.

The on-screen menus disappear from the screen after about one minute.

Using the TOOLS Button

You can use the TOOLS button to select your frequently used functions quickly and easily. The Tools menu changes depending on which external input mode you are viewing.

Press the TOOLS button. The Tools menu will appear.

2. Press the ▲ or ▼ button to select a menu, then press the ENTERE button.

Press the ▲ / ▼ / ◄ / ► / ENTERE buttons to display, change, or use the selected

items. For a more detailed description of each function, refer to the corresponding page.

Anynet+ (HDMI-CEC), see page 30 Picture Mode, see page 17

Sound Mode, see page 23 Sleep Timer, see page 27 Energy Saving, see page 26

Add to Favourite (or Delete from Favourite), see page 15 Auto Adjustment, see page 21

•

Mode : Standard

Cell Light : 4

Contrast : 95

Brightness : 45

Sharpness : 50

Colour : 50

Tint (G/R) : G50/R50

Picture

Tools

Anynet+ (HDMI-CEC)

Picture Mode : Standard Sound Mode : Custom Sleep Timer : Off Energy Saving : Off

Add to Favourite

Move E Enter e Exit

BN68-01936F-Eng-1.indd 10 2009-02-25 오후 9:19:55

English - 11

Plug & Play Feature

When the TV is initially powered on, basic settings proceed automatically and subsequently.

The Screen Saver is activated if there is no remote control key input for longer than 1 minute while Plug & Play is running. The Screen Saver is activated if there is no operating signal for longer than 15 minutes.

Press the POWER button on the remote control. You can set the menu language. menu is automatically displayed. Select the

appropriate language by pressing the ▲ or ▼ button. Press the ENTERE button to conrm your choice.

2. Press the ◄ or ► button to select Store Demo or Home Use, then the ENTER

button.

We recommend setting the TV to Home Use mode for the best picture in your home environment.

Store Demo mode is only intended for use in retail environments. If the unit is accidentally set to Store Demo mode and you want to return to Home Use (Standard): Press the Volume button on

the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.

Press the ENTEREbutton. Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTERE button to conrm

your choice.

Press the ▲ or ▼ button to memorize the channels of the selected connection, then press the ENTERE button.

Air: Air antenna signal. Cable: Cable antenna signal.

Press the ▲ or ▼ button to select the channel source to memorize. Press the ENTER

button to select Start.

Digital & Analogue: Digital and Analogue channels. Digital: Digital channels. Analogue

: Analogue channels.ogue channels.e channels. For more detailed description of selecting Cable mode,, refer to page 12. The channel search will start and end automatically. Press the ENTER

button at any time to interrupt the memorization process.

After all the available channels are stored, the message Set the Clock Mode. is displayed.

Press the ENTERE button. Press the ▲ or ▼ button to select Auto, then Press the ENTERE button.

If you select Manual, Set current date and time is displayed. (refer to page 27) If you have received a digital signal, the time will be set automatically. If not, see page 27 to set the clock.

7. The brief instruction on How to get the best performance from your new HDTV. is displayed. Press the ENTERE button.

This menu is available HD Connection Guide in the Support menu.

8. The message Enjoy your TV is displayed. When you have nished, press the ENTER

button.

If you want to reset this feature...

Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup,

then press the ENTER

button.

2. Press the ENTER

button again to select Plug & Play.

Enter your 4 digit PIN number. The default PIN number of a new TV set is ‘0-0-0-0’.

If you want to change PIN number, refer to 25 page.

The Plug & Play feature is only available in the TV mode.

N N

•

N N N N

N N

Setup

Plug & Play



Language : English

Time

Game Mode : Off

Child Lock : On Change PIN Parental Lock

Plug & Play

You can set the menu language.

Move E Enter

▲

Nederlands

English

Eesti

▼

Menu Language :

BN68-01936F-Eng-1.indd 11 2009-02-25 오후 9:19:55

English - 12

Storing Channels

Country

Digital Channel: You can change the country for digital channels.

Analogue Channel: You can change the country for analogue channels.

The PIN number input screen appears. Enter your 4 digit PIN number.

Auto Store

Scans for all channels with active broadcast stations (and availability depends on your

country) and stores them in the TV's memory. You can memorize the channels of the selected connection.

Air: Air antenna signal. Cable: Cable antenna signal.

When selecting Cable,

Search Mode: Displays the search mode. (Quick)

Network ID: Displays the network identication code. Frequency: Displays the frequency for the channel. Modulation: Displays available modulation values. Symbol Rate: Displays available symbol rates.

Search Mode: Displays the search mode. (Full, Network)

Frequency (Start~Stop): Displays the frequency for the channel. Modulation: Displays available modulation values. Symbol Rate: Displays available symbol rates.

You can memorize the Channel source

Digital & Analogue: Digital and Analogue channels. Digital: Digital channels. Analogue: Analogue channels. If you want to stop Auto Store, press the ENTER

button.

The Stop Auto Store? message will be displayed.

Select Yes by pressing the ◄ or ► button, then press the ENTER

button.

If a channel is locked using the Child Lock function, the PIN input window appears.

❑



❑

•

N N N N

Channel Control

Continued...

Channel

Country



Auto Store Manual Store Cable Search Option Now & Next Guide

Full Guide

Default Guide : Now/Next

BN68-01936F-Eng-1.indd 12 2009-02-25 오후 9:19:56

English - 13

Manual Store

Scans for a channel manually and stores it in the TV’s memory.

Digital Channel (Digital)

Manual store for digital channels.

Digital Channel is only available in DTV mode.

Channel: Set the Channel number using the ▲, ▼ or number (

0~9) buttons.

Frequency: Set the frequency using the number buttons. Bandwidth: Set the bandwidth using the ▲, ▼ or number (

0~9) buttons.

When it has nished, channels are updated in the channel list.

Analogue Channel

Manual store for analogue channel.

Programme (Programme number to be assigned to a channel): Sets the programme number using the ▲, ▼ or number (0~9)

buttons.

: Sets the colour system value using the ▲ or ▼ button.

Sound System → BG / L / I / DK: Sets the sound system value using the ▲ or ▼ button. Channel (When you know the number of the channel to be stored): Press the ▲ or ▼ button to select C (Air channel) or S

(Cable channel). Press the ► button, then press the ▲, ▼ or number (

0~9) buttons to select the required number.

You can also select the channel number directly by pressing the number (

0~9) buttons.

If there is abnormal sound or no sound, reselect the sound standard required.

Search (When you do not know the channel numbers): Press the ▲ or ▼ button to start the search. The tuner scans the frequency range until the rst channel or the channel that you selected is received on the screen.

Store (When you store the channel and associated programme number): Set to OK by pressing the ENTER

button.

Channel mode

C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this mode.

S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode.

Cable Search Options (Cable)

You can add directly the channel search range in the network search mode. (Dependingon the each country)

Frequency (Start~Stop): Displays the frequency for the channel. Modulation: Displays available modulation values. Symbol Rate: Displays available symbol rates. Set the Frequency (Start~Stop) and Symbol Rate using the number (

0~9) buttons.

Now & Next Guide / Full Guide

The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme entries may appear blank or out of date as a result of the information broadcast on a given channel. The display will dynamically update as soon as new information becomes available.

Now & Next Guide

: For the six channels indicated in the left-hand column, displays the Current programme and the Next

programme information.

Full Guide:

Displays the programme information as time ordered One hour segments. One hours of programme information is

displayed which may be scrolled forwards or backwards in time.

❑



•



•

N N

•

❑

•

❑



Continued...

BN68-01936F-Eng-1.indd 13 2009-02-25 오후 9:19:56

English - 14

Default Guide

Now/Next / Full Guide:

You can decide whether to display either the Now/Next or

the Full Guide when the GUIDE button on the remote control is pressed.

You can also display the guide menu simply by pressing the GUIDE button.

Using the Now & Next Guide / Full Guide

▲ / ▼ / ◄ / ►

(ENTER)

Select a programme by pressing the ▲/▼/◄/► button. If the next progrmme is selected, it is scheduled with the clock icon displayed. If the ENTERE button is pressed again, press the ▲/▼/◄/► button to select Cancel Schedules, the scheduling is canceled with the clock icon gone. For details about scheduling programmes, refer to the section.

RED Toggle between the Now/Next or Full Guide.

GREEN Full Guide: Scroll backwards quickly (-24 hours).

YELLOW Full Guide: Scroll forwards quickly (+24 hours).

BLUE Exit the guide.

INFO

INFO button for the detailed information. Channel Number, Running Time, Status Bar, Parental Level, Video

Quality Information (HD/SD), Sound Modes, Subtitle or Teletext, languages of Subtitle or Teletext and brief

summary of the highlighted programme are included on the detailed information. “…” will be appeared if the summary is long.

Channel List

For the detailed procedures on using the Channel List, refer to the descriptions on pages 15~16.

Channel Mode

When the press the P </> button, Channels will be switched within the selected channel list.

Added Ch.

: Channels will be switched within the memorized channel list.

Favourite Ch.

: Channels will be switched within the favourite channel list.

Fine Tune (only analogue channels)

If the reception is clear, you do not have to ne tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, you may have to ne tune the channel manually.

Fine tuned channels that have been saved are marked with an asterisk * on the right-hand side of the channel number in the channel banner.

If you do not store the ne-tuned channel in memory, adjustments are not saved. To reset the ne-tuning, select Reset by pressing the ▼ button and then press the ENTER

button.

❑



❑



❑

N N

Channel

Now & Next Guide

Full Guide

Default Guide : Now/Next



Channel List

Channel Mode : Added Ch.

Fine Tune

Full Guide

DTV Cable 900 f tn 2:10 Tue 1 Jun Freshmen On Campus 2:00 - 2:30

No Detailed Information

Today 2:00 - 3:00 3:00 - 4:00

Mint Extra

Loaded

Fresh 40 with Dynamite MC The Distillery

Smash Hits! Sunday

900 f tn 901 ITV Play

902 Kerrang!

903 Kiss 903 oneword

903 Smash Hits!

▼

Street Hypn..

Kisstory

No Information

Freshmen O..

Watch

INFO

Information



Now/Next +24 Hours Exit

Now & Next Guide

DTV Cable 900 f tn 2:10 Tue 1 Jun Freshmen On Campus 2:00 - 2:30

No Detailed Information

Mint Extra

Loaded

Fresh 40 with Dynamite MC The Distillery

Smash Hits! Sunday

900 f tn 901 ITV Play

902 Kerrang!

903 Kiss 903 oneword

903 Smash Hits!

▼

Street Hypn..

Kisstory

No Information

Freshmen O..

Watch

INFO

Information



Full Guide Exit

Now Next

BN68-01936F-Eng-1.indd 14 2009-02-25 오후 9:19:56

English - 15

Managing Channels

Using this menu, you can Add / Delete or set Favourite channels and use the programme

guide for digital broadcasts.

Select a channel in the All Channels, Added Channels, Favourites, or Programmed screen by pressing the ▲ / ▼ buttons, and pressing the ENTERE button.

Then you can watch the selected channel.

All Channels:

Shows all currently available channels.

Added Channels:

Shows all added channels.

Favourites:

Shows all favourite channels.

Programmed:

Shows all current reserved programmes.

Using the Colour buttons with the Channel List

Red (Channel Type): Toggle between your TV, Radio, Data/Other and All. Green (Zoom): Enlarges or shrinks a channel number. Yellow (Select): Selects multiple channel lists. TTOOLS (Tools): Displays the Delete (or Add), Add to Favourite (or Delete from

Favourite), Timer Viewing, Edit Channel Name, Edit Channel Number, Sort, Lock

(or Unlock), Select All (or Deselect All), or Auto Store menu. (The Options menus may differ depending on the situation.)

Channel Status Display Icons

An Analogue channel.

A channel selected by pressing the yellow button.

♥

A channel set as a Favourite.

(

A programme currently being broadcast.

A locked channel.

)

A reserved programme

Press the CH LIST button on the remote control to bring up the channel lists.

Channel List Tools Menu (in All Channels / Added Channels / Favourites)

Press the TOOLS button to use the Tools menu. Option menu items may differ depending on the channel status.

Add / Delete

You can delete or add a channel to display the channels you want.

All deleted channels will be shown on All Channels menu. A gray-coloured channel indicates the channel has been deleted. The Add menu only appears for deleted channels. You can also delete a channel to the Added Channels or Favourite menu in the

same manner.

Add to Favourite / Delete from Favourite

You can set channels you watch frequently as favourites.

Press the TOOLS button to display Tools menu. You can also add the favourite channel by selecting Tools →→ Add to Favourite (or Delete from Favourite).

The “♥” symbol will be displayed and the channel will be set as a favourite.

All favourite channels will be shown on Favourite menu. To select the Favourite channels you have set up, press the FAV.CH button on the

remote control.

Timer Viewing

If you reserve a programme you want to watch, the channel is automatically switched to the reserved channel in the Channel List; even when you are watching another channel. To reserve a programme set the current time rst. (See page 27)

Only memorized channels can be reserved. You can set the channel, month, day, year, hour and minute directly by pressing the number buttons on the remote control. Reserving a programme will be shown on Programmed menu. Digital Programme Guide and Viewing Reservation

When a digital channel is selected, and you press the ► button, the Programme Guide for the channel appears. You can reserve a programme according to the procedures described above.



❑

N N



N N N N



N N O



N N N N

Channel

Full Guide

Default Guide : Now/Next

Channel List

Channel Mode : Added Ch.

Fine Tune

824 UKTV Gold 825 UKTV style

A 1 C --

A 2 C

A 3 ♥ C

A 4 C

A 5 C

A 6 C

A 7 C

A 8 C

Added Channels

All



Channel Type Zoom Select

Tools

824 UKTV Gold 825 UKTV style

A 1 C --

A 2 C

A 3 C

A 4 C

A 5 C

A 6 C

A 7 C

A 8 C

All Channels

All



Channel Type Zoom Select

Tools

Delete

Add to Favourite

Timer Viewing

Edit Channel Name Sort Lock

▼

Continued...

BN68-01936F-Eng-1.indd 15 2009-02-25 오후 9:19:57

English - 16

Edit Channel Name (only analogue channel)

Channels can labeled so that their call letters appear whenever the channel is selected.

The names of digital broadcasting channels are automatically assigned and cannot be labeled.

Edit Channel NumberNumber (only digital channel) You can also edit the channel number by pressing the number buttons on the remote control.

Sort (only analogue channel) This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using

the auto store.

Lock / Unlock

You can lock a channel so that the channel cannot be selected and viewed. This function is available only when the Child Lock is set to on. (see page 25)

The PIN number input screen appears. Enter your 4 digit PIN number. The default PIN number of a new TV set is ‘0-0-0-0’. You can change the PIN, by selecting Change PIN from the menu.

The “\” symbol will be displayed and the channel will be locked.

Select All / Deselect All

Select All: You can select all the channels in the channel list. Deselect All: You can deselect all the selected channels in the channel list.

You can perform the add / delete, add to Favourites / delete from Favourites, or lock / unlock function for multiple channels at

the same time. Select the required channels and press the yellow button to set all the selected channels at the same time.

The c mark appears to the left of the selected channels. You can only select Deselect All when there is a selected channel.

Auto Store

For further details on setting up options, refer to page 12. If a channel is locked using the Child Lock function, the PIN input window appears.

Channel List Option Menu (in Programmed)

You can view, modify or delete a reservation.

Press the TOOLS button to use the option menu.

Change Info: Select to change a viewing reservation. Cancel Schedules: Select to cancel a viewing reservation. Information: Select to view a viewing reservation.

(You can also change the reservation information.) Select All: Select all reserved programmes.



N N N



•

N N



N N

❑

•

Programmed

1 / 1 / 2009

13:59 5 TV1 Quincy, M.E

18:59 2 TV3 The Equalizer

20:59 2 TV3 McMillan & Wife

21:59 2 TV3 M.Spillane’s mike Hammer

Change Info

Cancel Schedules

Information

Select All

All



Zoom Select

Tools Information

BN68-01936F-Eng-1.indd 16 2009-02-25 오후 9:19:57

English - 17

Changing the Picture Settings

Mode

You can select the type of picture which best corresponds to your viewing requirements.

Dynamic: Selects a high-denition picture for bright environments. Standard: Selects the optimal picture display for normal environments. Movie: Selects a comfortable picture display for dark environments.

Press the TOOLS button to display Tools menu. You can also set the picture mode by selecting .

Cell Light / Contrast / Brightness / Sharpness / Colour / Tint (G/R)

Your television has several setting options that allow you to control the picture quality.

Cell Light: Adjusts the pixel brightness. Contrast: Adjusts the contrast level. Brightness: Adjusts the brightness level. Sharpness: Adjusts the sharpness. Colour: Adjusts the colour saturation of the picture using the bar on the screen. Tint (G/R): The closer to Red 100, the more saturated the red colour becomes.

Select a picture mode to be adjusted rst. The adjusted values are saved for each picture mode.

When you make changes to Cell Light, Contrast, Brightness, Sharpness, Colour or Tint (G/R), the OSD will be adjusted accordingly.

In Analogue TV, Ext., AV modes of the PAL system, you cannot use the Tint Function.

In PC mode, you can only make changes to Cell Light, Contrast and Brightness.

Settings can be adjusted and stored for each external device you have connected to an input of the

TV.

The energy consumed during use can be signicantly reduced if the level of brightness of the picture is reduced, and then this

will reduce the overall running cost.

Advanced Settings

Samsung’s new TVs allow you to make even more precise picture settings than previous models. See below to adjust detailed picture settings.

Advanced Settings is available in Standard or Movie mode. In PC mode, you can only make changes to Gamma and White Balance from

among the Advanced Settings items.

               Off / Dark / Darker / Darkest

You can select the black level on the screen to adjust the screen depth.

               Off / Low / Medium / High

You can adjust the screen contrast so that the optimal contrast is provided.

Gamma

You can adjust the primary colour (Red, Green, Blue) Intensity.

Colour Space

Colour Space is a colour matrix composed of red, green and blue colours. Select your favourite Colour Space to experience the

most natural colour.

Auto: Automatically sets the colour range depending on the input video source. Native: Sets a colour range wider than that of the input video source.

White Balance

You can adjust the colour temperature for more natural picture colours.

R-Offset / G-Offset / B-Offset / R-Gain / G-Gain / B-Gain: Changing the adjustment value will refresh the adjusted screen. Reset: Resets the default white balance.

Flesh Tone

You can emphasize the pink esh tone in the picture.

Changing the adjustment value will refresh the adjusted screen.

       Off / On

You can emphasize object boundaries in the picture.

❑

•

❑

•

N N

N N N N

❑

N N



•



•



Picture Control

Continued...

Mode : Standard



Cell Light : 4

Contrast : 95

Brightness : 45

Sharpness : 50

Colour : 50

Tint (G/R) : G50/R50

Picture

Colour : 50

Tint (G/R) : G50/R50

Advanced Settings



Picture Options

Picture Reset

Picture

BN68-01936F-Eng-1.indd 17 2009-02-25 오후 9:19:57

English - 18

Picture Options

In PC mode, you can only make changes to the Colour Tone, Size and Screen Burn Protection from among the items in Picture Options.

Colour Tone Cool / Normal / Warm1 / Warm2

You can select the most comfortable colour tone to your eyes.

The adjusted values are stored according to the selected Picture mode.

Warm1 or

Warm2 is only activated when the picture mode is Movie.

Size

You can select the picture size which best corresponds to your viewing requirements.

Auto Wide: Sets the picture in Auto Wide format. 16:9: Sets the picture to the 16:9 aspect ratio. Wide Zoom: Select this menu to view 4:3 aspect ratio pictures over a 16:9 aspect ratio TV by stretching the 4:3 picture

vertically.

Zoom: Stretches the 16:9 aspect ratio picture vertically. 4:3: Sets the picture to the 4:3 aspect ratio. Screen Fit: Displays the full native HD signal that cannot be viewed using a normal TV.

The picture size options may vary depending on the input source. The items available may differ depending on the selected mode. In PC Mode, only

16:9 and 4:3 mode can be adjusted.

Settings can be adjusted and stored for each external device you have connected to an input of the

TV.

Temporary image retention may occur when viewing a static image on the set for more than two hours. Wide Zoom: Press the ► button to select Position, then press the ENTER

button.

Press the ▲ or ▼ button to move the screen up / down. Then press the ENTER

button.

Zoom: Press the ► button to select Position, then press the ENTER

button. Press the ▲ or ▼ button to move the picture

up and down. Then press the ENTER

button. Press the ► button to select Size, then press the ENTER

button. Press the

▲ or ▼ button to magnify or reduce the picture size in the vertical direction. Then press the ENTER

button.

After selecting Screen Fit in HDMI (1080i / 1080p) or Component (1080i / 1080p) mode: Select Position by pressing

the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture. Reset: Press the ◄ or ► button to select Reset, then press the ENTER

button. You can initialize the setting.

If you use the Screen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the overscan function. You can select these options simply by pressing the P.SIZE button on the remote control.

Screen Mode

When setting the picture size to Auto Wide in a 16:9 wide TV, you can determine the picture size you want to see the 4:3 WSS (Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is

intended for users to select it.

16:9: Sets the picture to the 16:9 aspect ratio. Wide Zoom: Select this menu to view 4:3 aspect ratio pictures over a 16:9 aspect ratio TV by stretching the 4:3 picture

vertically.

Zoom: Stretches the 16:9 aspect ratio picture vertically. 4:3: Selects the screen mode as 4:3.

This function is available in Auto Wide mode. This function is not available in PC, Component or HDMI mode.

Digital NR Off / Low / Medium / High / Auto

If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static

and ghosting that may appear on the screen.

When the signal is weak, select one of the other options until the best picture is displayed.

HDMI Black Level Normal / Low

You can directly select the black level on the screen to adjust the screen depth.

This function is active only when the external input connects to HDMI (RGB signals).

❑



N N



•

N N N N N

N N



•

N N



Continued...

Tint (G/R) : G50/R50

Advanced Settings

Picture Options



Picture Reset

Picture

BN68-01936F-Eng-1.indd 18 2009-02-25 오후 9:19:57

English - 19

Film Mode

You can optimize the picture mode for watching movies.

Off : Basic video image processing applied and No auto-detection for lm-based programs. Auto: Automatically adjusts for the best image quality between lm and video programs.

Screen Burn Protection

Congures the Screen Burn Protection Options to prevent and reduce pixel burn.

When an image remains in one position too long, it may cause a permanent burn on the screen.

Pixel Shift: To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. This technology enables you to set picture movement up/down (Vertical) and side to side (Horizontal). The Time setting allows you to program the time between movement of the picture in minutes.

Set Pixel Shift to On by pressing the ▲ or ▼ button, then press the ENTEREbutton. Select the required option by pressing the ▲ or ▼ button, then press the ENTERE button.

Available options: Horizontal, Vertical, Time. Optimum condition for pixel shift

Item TV/Ext/AV/Component/HDMI/PC

Horizontal 0~4 2

Vertical 0~4 2

Time (minute) 1~4 min 3 min

The Pixel Shift value may differ depending on the monitor size (inches) and mode.

This function is not available in the Screen Fit mode.

Scrolling: This function helps remove after images on the screen by moving all the pixels on the PDP according to a pattern

Use this function when there are remaining after images or symbols on the screen especially when you displayed a still image

on the screen for a long time. Side Grey: When you watch TV with the screen ratio of 4:3, the screen is prevented from any damage by adjusting the white

balance on both extreme left and right sides.

Dark: When you set the screen ratio to 4:3, it darkens the left and right sides. Light: When you set the screen ratio to 4:3, it brightens the left and right sides.



•



•

N N N N

N N

•

BN68-01936F-Eng-1.indd 19 2009-02-25 오후 9:19:57

English - 20

Using the 3D Function

You can enjoy 3D movies and games on your TV. The 3D effects function enables you to view 3D images using special 3D glasses.

Connections

❑

1. Connect a HDMI/DVI cable between the HDMI IN 2(DVI) jack on the TV and the PC output jack on your computer.

2. Connect a 3.5mm Stereo Audio Cable between the DVI AUDIO IN jack on the TV and the Audio Out jack of the sound card on your

computer.

Connect the Emitter to the 3D SYNC OUT port on the rear panel of the TV.

4. Turn the TV on and set the source of the TV to HDMI2/DVI.

For more information on the 3D glasses (including the Emitter), refer to the user manual of your 3D glasses.

Adjust the PC resolution

: - PS42B450B/PS42B451B : 1024 x 768@60Hz

- PS50B450B/PS50B451B : 1024 x 768@60Hz, 1360 x 768@60Hz Optimum PC resolution for PS50B450B/PS50B451B is 1360x768. When 1024x768 signal is connected in 3D mode, the picture will

be shown in 4:3 format with left and right side grey bars appeared. The 3D IR Emitter communicates with the 3D glasses.

Therefore, the 3D IR Emitter should be located near the 3D glasses.

It is activated when the HDMI or DVI input signal is RGB, and DVI Sound is supported.activated when the HDMI or DVI input signal is RGB, and DVI Sound is supported. when the HDMI or DVI input signal is RGB, and DVI Sound is supported.

When the power is turned on or off, the mode changes to the default (Off) and the Format is saved. To use the 3D Effect function, a graphics card supporting 3D or 3D software is required. The 3D glasses and the Emitter must be manufacturer by the same company. If you play a game or watch TV while wearing the 3D glasses for long periods of time, you may experience eyestrain or a headache.

3D glasses (including the Emitter) not manufactured by Samsung may not be supported. If you nd the screen ickering while the 3D function is used, change the environmental lighting darker or turn of

f the uorescent

lamp to watch the screen for its best condition.

N N

N N N N N N N

The appearance of the 3D glasses (including Emitter) may differ depending on the model of your glasses.

3D Glasses

(Not supplied)

3D IR Emitter

(Not supplied)

TV Rear Panel

3.5mm Stereo Audio Cable

HDMI/DVI Cable (Not supplied)

Continued...

BN68-01936F-Eng-1.indd 20 2009-02-25 오후 9:19:58

English - 21

Setting up the TV with your PC

Preset: Press the SOURCE button to select PC mode.

Auto Adjustment

Auto Adjustment allows the PC screen of set to self-adjust to the incoming PC video

signal. The values of ne, coarse and position are adjusted automatically.

This function does not work in DVI-HDMI mode.

Press the TOOLS button to display Tools menu. You can also set the adjustment by selecting .

Screen

Coarse

Adjusts the frequency when vertical noise appears on the screen.

Fine

Adjusts the screen to be clearer.

PC Position

Adjust the PC’s screen positioning if it does not t the TV screen. Press the ▲ or ▼Press the ▲ or ▼ button to adjusting the Vertical-Position. Press the ◄ or ► button to adjust the

Horizontal-Position.

Image Reset

You can replace all image settings with the factory default values.

❑



Changing the Mode

Provides the function to turn on the 3D Effect. You can choose between Mode1 and Mode2. To achieve the 3D effect, the 3D glasses shutter back and forth from the left to

right and vice versa (left/right sync).

Off : Turns the 3D Effect function off. Mode1 : Mode 1 operates with right sync rst. Mode2 : Mode 2 operates with left sync rst. 2D : Provides picture converted 3D to 2D. You can choose this to watch 2D

picture temporally when you feel dizzy, but you should choose Off to end 3D Effect completely.

If the 3D effect is not working properly, it means the Mode and 3D glasses may not be syncing properly. To put them in sync, switch to the other mode.

Changing the Format

Select the optimal input format to match your graphic cards or 3D Software.

Checker Board : If the output format of your graphic card or 3D software is Checkerboard, select this input format.

Horizontal : If the output format of your graphic card or 3D software is Horizontal interleaved, select this input format. Vertical : If the output format of your graphic card or 3D software is Vertical interleaved, select this input format.



Resets all picture settings to the default values.

Select a picture mode to be reset. The reset is performed for each picture mode.

❑

•

❑

•

❑

Picture Options

Size : 16:9

Screen Mode : 16:9 Digital NR : Auto HDMI Black Level : Normal

Film Mode : Off

Screen Burn Protection

3D Effect

▶

ReturnEnterMove

▲

3D Effect

Mode : Off

Format : Checker Board ▶

Return Enter Move

Screen

Coarse 50

Fine 44

PC Position

Image Reset

Return Enter Move

Brightness : 45

Sharpness : 50

Auto Adjustment



Screen Advanced Settings

Picture Options

Picture Reset

PicturePicture

Advanced Settings

Picture Options

Picture Reset



Picture

BN68-01936F-Eng-1.indd 21 2009-02-25 오후 9:19:58

English - 22

PC Display

Setting Up Your PC Software (Based on Windows XP)

The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. However, even if your actual screens look different, the same basic set-up information will apply in almost all cases. (If not,

contact your computer manufacturer or Samsung Dealer.)

First, click on ‘Control Panel’ on the Windows start menu.

2. When the control panel window appears, click on ‘Appearance and Themes’ and a

display dialog-box will appear.

When the control panel window appears, click on ‘Display’ and a display dialog-box

will appear.

Navigate to the ‘Settings’ tab on the display dialog-box.

The correct size setting (resolution) Optimum

PS42B450B/PS42B451B : 1024x768 pixels PS50B450B/PS50B451B : 1360x768 pixels

If a vertical-frequency option exists on your display settings dialog box, the correct value is ‘60’ or ‘60 Hz’. Otherwise, just click ‘OK’ and exit the dialog box.

Display Modes

Both screen position and size will vary depending on the type of PC monitor and its resolution. The resolutions in the table are recommended.

D-Sub and HDMI/DVI Input

Mode Resolution

Horizontal

Frequency (kHz)

Vertical

Frequency (Hz)

Pixel Clock

Frequency (MHz)

Sync Polarity

(H/V)

PS42B450B/

PS42B451B

PS50B450B/

PS50B451B

IBM

640 x 350 31.469 70.086 25.175 + / -

✓ ✓

720 x 400 31.469 70.087 28.322 - / +

✓ ✓

MAC

640 x 480 35.000 66.667 30.240 - / -

✓ ✓

832 x 624 49.726 74.551 57.284 - / -

✓ ✓

VESA DMT

640 x 480

31.469 59.940 25.175 - / -

✓ ✓

37.861 72.809 31.500 - / -

✓ ✓

37.500 75.000 31.500 - / -

✓ ✓

800 x 600

37.879 60.317 40.000 + / +

✓ ✓

48.077 72.188 50.000 + / +

✓ ✓

46.875 75.000 49.500 + / +

✓ ✓

1024 x 768

48.363 60.004 65.000 - / -

✓ ✓

56.476 70.069 75.000 - / -

✓ ✓

60.023 75.029 78.750 + / +

✓ ✓

1360 x 768 47.712 60.015 85.500 + / +

✓

VESA CVT

720 x 576 35.910 59.950 32.750 - / +

✓ ✓

1280 x 720

44.772 59.855 74.500 - / +

✓

56.456 74.777 95.750 - / +

✓

VESA GTF 1280 x 720 52.500 70.000 89.040 - / +

✓

When using an HDMI/DVI cable connection, you must use the HDMI IN 2 (DVI) jack. The interlace mode is not supported. The set might operate abnormally if a non-standard video format is selected.

❑



N N N

BN68-01936F-Eng-1.indd 22 2009-02-25 오후 9:19:58

+ 51 hidden pages