Rinnai HINRA35M, HINRA26M, HSNRA80, HINRA50M, HINRA70M Owner's Manual

...

0 (0)

This appliance shall be installed in accordance with:

• Manufacturer’s Installation Instructions

• Current AS/NZS 3000

• Local Regulations and Municipal Building Codes including local OH&S requirements This appliance must be installed, maintained and removed by an Authorised Person. For continued safety of this appliance it must be installed and maintained in

accordance with the manufacturer’s instructions.

HINRA26M

HINRA35M

HINRA50M

HINRA70M

HINRA80

HSNRA26

HSNRA35

HSNRA50

HSNRA70

HSNRA80

HONRA26

Indoor System Outdoor

HONRA35

HONRA50

HONRA70

HONRA80

Rinnai System Models

HINRA20MReference Only Matching Multi System Only

Owner’s Manual

Split Type Wall Mounted Air Conditioner

Rinnai 2 Split AC OM

TABLE OF CONTENTS

Warnings and Important Information 3

Air Conditioner Basics 5

Appliance Components �� 5

Display Window States �� 5

Other Features �� 5

Remote Control Batteries �� 6

Remote Control Cradle �� 6

Controller Operating Basics �� 6

Achieving The Optimal Performance �� 6

Basic Operation 7

Adjusting Vertical air ow ��7

Adjusting Horizontal air ow �� 7

Sleep Operation �� 8

Power Interruption Automatic Restart ��8

Manual Operation 9

Operating The Air Conditioner Without The Remote Control �� 9

Care & Maintenance 10

Cleaning the Indoor Unit �� 10

Cleaning the Air Filter �� 10

Cleaning the Outdoor Unit �� 11

General Maintenance �� 11

Installation Record - Installer Details �� 12

Installation Record - System Details �� 12

Customer care Program �� 12

Service Maintenance Schedule - Non Ducted Air Conditioning Systems ��13

Save A Service Call �� 14

When to Call for Service �� 16

Disposal Guidelines �� 16

Warranty 17

Contacts 20

Rinnai 3 Split AC OM

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.

Always comply with the following precautions to avoid dangerous situations and to ensure optimum performance�

Failure to carefully read and follow all instructions in this manual can result in equipment malfunction, property damage, personal injury and/or death�

WARNINGS: WHEN IGNORED, CAN RESULT IN SERIOUS INJURY OR DEATH.

CAUTIONS: WHEN IGNORED, CAN RESULT IN MINOR INJURY OR PRODUCT DAMAGE.

WARNING

REGULATORY / INSTALLATION

This appliance shall be installed in accordance with:

Manufacturer’s Installation Instructions�

Current AS/NZS 3000�

Local Regulations and Municipal Building Codes including local OH&S requirements�

This appliance must be installed, maintained and removed by an Authorised Person�

For continued safety of this appliance it must be installed and maintained in accordance with the manufacturers instructions�

This appliance uses R410A refrigerant�

This appliance is heavy, use 2 people or mechanical lifting device� Improper lifting may result in serious injury�

Take care when opening or unpacking this appliance� Failure to do so may result in serious injury or product failure�

DO NOT modify the electrical wiring of this appliance� If the control power wiring is damaged or deteriorated then it must be replaced by an authorized person� Failure to do so may result in electric

shock, re, serious injury or product failure.

DO NOT install the air conditioner on an unstable or non level surface or where there may be a danger of it falling� It may result in death, serious injury, or product failure�

DO NOT install the outdoor unit where noise may cause nuisance�

DO NOT install the outdoor unit where it will be exposed to sea wind (salt spray) as this will reduce

durability�

ACHIEVING OPTIMAL PERFORMANCE

For optimal performance ensure to use the air conditioner within the following temperature ranges� Using the air conditioner outside of these ranges, will activate certain safety protection features, that will effect the appliances performance�

MODE COOL MODE HEAT MODE DRY MODE

Room Temperature 17°C ~ 32°C 0°C ~ 30°C 17°C ~ 32°C

Outdoor Temperature -15°C ~ 50°C -15°C ~ 30°C 0°C ~ 50°C

WARRANTY EXCLUSIONS

Rinnai product warranty excludes faults and failures caused by improper use and abuse; fair wear and tear; or failure to follow instructions regarding service and maintenance� It is very important that you maintain your appliance and have it serviced regularly� It is a condition of warranty that you adhere to the maintenance and service requirements as set out in this manual� Compliance with these requirements will

prolong the useful life of your appliance and help ensure it operates efciently. The “Service Maintenance Schedule - Non Ducted Air Conditioning Systems” on page 13 species specic items to be performed at prescribed intervals by qualied licensed technicians. The schedule should also be fully completed

and retained as a record of who carried out the service, the date and actions taken�

IMPORTANT: Failure to carry out the requisite maintenance, servicing and recording requirements may

void your product warranty. Please refer to “Warranty” on page 17 for full details.

IMPORTANT

WARNINGS AND IMPORTANT INFORMATION

Rinnai 4 Split AC OM

OPERATION

DO NOT let the air conditioner run for extended periods when the humidity is very high or when doors or

windows are left open� As this may result in an excessive operational loading and lead to product failure�

DO NOT cover or place articles on any part of this appliance�

DO NOT touch, operate or clean the air conditioner with wet hands� It may result in electric shock or

product failure�

DO NOT insert hands or other objects through the air inlet or outlet of the appliance� It may result in electric shock or product failure�

DO NOT place a heater or other heating appliances near this appliance, always ensure sufcient

ventilation when using this appliance and a heating appliance at the same time� Failure to do so may result in product miss-operation�

Turn main power off before cleaning. Failure to do so may result in re, electric shock, or product failure.

DO NOT use solvents, abrasives or harsh detergent to clean any part or surface of this appliance or spray water or allow liquids to enter the indoor unit� The enclosure of the appliance and remote control can be cleaned using a soft, damp cloth and a mild detergent�

NEVER touch the metal parts of the air conditioner when you remove the air lter. It may result in electric

shock or product failure�

DO NOT leave ammable materials near the appliance. It may result in explosion or re.

If there is excessive noise, smell or smoke coming from the appliance, turn the appliance OFF, isolate the power supply and contact a service agent�

DO NOT operate the appliance if it has been submerged into water due to ooding, contact a service agent. Failure to do so may result in electric shock, re, serious injury, or product failure.

This appliance is NOT intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety�

Children should be supervised to ensure that they do not play with the appliance�

The air conditioning system is designed to achieve consumer comfort� It is not designed for commercial applications requiring a controlled atmosphere (i�e� computer rooms, food preservation, etc�)

DO NOT block the inlet or outlet of air ow. It may result product failure.

DO NOT drink the condensate water drained from the appliance� This condensate is not potable and may

present a health risk if consumed�

DO NOT expose people, animals or plants directly to the cold or hot discharge of the appliance� It may result in serious injury�

DO NOT mix the batteries for the remote control with other types of batteries or mix new batteries with used batteries� Failure to do so may result in product failure� STOP using the remote control if there is a

battery uid leak.

DO NOT use an extension cord, manually extend the power cord, or connect other appliances to the

same outlet as the air conditioner. Poor electrical connections, poor insulation, and insufcient voltage can cause re.

NOTE

A NOTE ON ILLUSTRATIONS

The illustrations used in this manual are for explanatory purposes only and the shape of your indoor unit may vary slightly from that which is shown in this manual�

WARNING

WARNINGS AND IMPORTANT INFORMATION

Rinnai 5 Split AC OM

APPLIANCE COMPONENTS

DISPLAY WINDOW STATES

For 3 seconds when:

TIMER ON is set� FRESH, SWING, TURBO, or SILENCE features are turned on�

For 3 seconds when:

TIMER OFF is set� FRESH, SWING, TURBO, or SILENCE features are turned off�

When anti-cold air feature is turned on�

When defrosting�

When unit is self-cleaning�

When freeze protection is turned on�

E-C-0

When ECO function (where tted) is activated, the display illuminates E - C - O one letter at a time

followed by the set temperature, in one second cycles�

NOTE

In Fan mode, the unit will display the room temperature, in all other operational modes the display will show your set temperature.

OTHER FEATURES

•

Auto-Restart If the unit loses power, it will automatically restart with the prior settings once power has been restored�

•

Anti-mildew (where tted)

When turning off the unit, from COOL, AUTO (COOL) or DRY modes, the air conditioner will continue to operate at very low power to dry up condensed water and prevent mildew growth�

•

Mute Operation (where tted)

Pressing the LED button on the remote control can turn off the indoor screen display, and also turn off the air conditioner buzzer, which creates a comfortable and quiet environment�

•

Wi-Fi Control (where tted)

Wi-Fi Control allows you to control your air conditioner using your mobile phone and a Wi-Fi connection�

•

Louvre Angle Memory (where tted)

When turning on your unit, the louvre will automatically resume its former angle�

•

Refrigerant Leakage Detection (where tted)

The indoor unit will automatically display ‘EC’ when it detects refrigerant leakage�

NOTE

For a more detailed explanation of your air conditioners advanced functionality, please refer to the Remote Control Manual.

Power Cable

(Where Fitted)

Remote Control

Remote Holder

(Where Fitted)

Louvre

Front

Panel

Air Filter

(pull out)

Display

Window

AIR CONDITIONER BASICS

Rinnai 6 Split AC OM

REMOTE CONTROL BATTERIES

Insert batteries before using the remote control� The battery type used is AAA (1�5 V)�

1� Remove the battery cover at the rear of the remote control�

2� Insert the new batteries and make sure that the + and - terminals of the batteries are installed correctly�

3� Reattach the battery cover�

NOTE

If the LCD screen of the remote control starts to fade or fails to transmit, replace the batteries.

REMOTE CONTROL CRADLE

For convenience a slide-in cradle is provided for xing the remote control to a wall.

IMPORTANT

To Install:

Choose a safe and easily-accessible place. DO NOT mount the cradle in direct sunlight as this may damage the controller.

Fix the cradle to the wall using the 2 screws provided.

CONTROLLER OPERATING BASICS

Point the remote control towards the signal receiver at the bottom of the air conditioner to operate it�

NOTE

The remote control may operate other electronic devices if pointed towards them. Make sure to point the remote control towards the signal receiver of the air conditioner.

ONLY use a soft cloth to clean the signal transmitter LED and the receiver window.

ACHIEVING THE OPTIMAL PERFORMANCE

MODE COOL MODE HEAT MODE DRY MODE

Room Temperature 17°C ~ 32°C 0°C ~ 30°C 17°C ~ 32°C

Outdoor Temperature -15°C ~ 50°C -15°C ~ 30°C 0°C ~ 50°C

To further optimise the performance of your unit, do the following:

•

Keep doors and windows closed�

•

Limit energy usage by using TIMER ON and TIMER OFF functions�

•

Do not block air inlets or outlets�

•

Regularly inspect and clean air lters.

NOTE

For a more detailed explanation of your air conditioner's advanced functionality, please refer to the Remote Control Manual.

AIR CONDITIONER BASICS

+ 14 hidden pages