Pelco IMES19-1VP, IMES19-1I, IME119-1VP User Manual

INSTALLATION

IME Series Network Mini Domes

Sarix® Cameras with SureVision
Technology

C2269M-A (11/13)

Contents

Important Notices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Legal Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Regulatory Notices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Korean Class A EMC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Video Quality Caution. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Open Source Software Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Warranty Statement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Recommended Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Getting Started. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

In-Ceiling Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Supplied Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
User-Supplied Parts List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Surface Mount Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Supplied Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
User-Supplied Parts List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Pendant Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Supplied Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
User-Supplied Parts List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

In-Ceiling: Indoor and Environmental/Vandal-Resistant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Pendant: Indoor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Pendant: Environmental/Vandal-Resistant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Surface Mount: Indoor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Surface Mount: Environmental/Vandal-Resistant. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Cable Terminations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Ethernet Wiring Requirement for PoE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Alarm/Relay/Audio Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

IP Address Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Logging On to the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Surface Mount Templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

2 C2269M-A (11/13)

List of Illustrations

1 Camera Ports and LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2 Plastic Retaining Ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3 Cutting the Hole: In-Ceiling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4 Preparing the Cable Entry Holes: In-Ceiling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
5 Installing the Back Box: In-Ceiling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
6 Connecting the Wiring: In-Ceiling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
7 Installing the Camera: In-Ceiling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
8 Adjusting the Field of View: In-Ceiling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

9 Installing the Lower Dome: In-Ceiling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
10 Installing the Pendant Mount: Indoor, Pendant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
11 Pulling the Wiring: Indoor, Pendant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
12 Connecting the Wiring: Indoor, Pendant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
13 Installing the Camera: Indoor, Pendant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
14 Adjusting the Field of View: Indoor, Pendant. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
15 Installing the Lower Dome: Indoor, Pendant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
16 Installing the Pendant Mount: Environmental/Vandal-Resistant, Pendant. . . . . . . . . . . . . . . . . . . . 25
17 Pulling the Wiring: Environmental/Vandal-Resistant, Pendant. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
18 Connecting the Wiring: Environmental/Vandal-Resistant, Pendant . . . . . . . . . . . . . . . . . . . . . . . . . 26
19 Installing the Camera: Environmental/Vandal-Resistant, Pendant . . . . . . . . . . . . . . . . . . . . . . . . . . 27
20 Adjusting the Field of View: Environmental/Vandal-Resistant, Pendant . . . . . . . . . . . . . . . . . . . . . 28
21 Installing the Lower Dome: Environmental/Vandal-Resistant, Pendant . . . . . . . . . . . . . . . . . . . . . . 29
22 Fastening the Mounting Plate: Indoor, Surface Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
23 Pulling the Wiring: Indoor, Surface Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
24 Connecting the Wiring: Indoor, Surface Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
25 Installing the Camera: Indoor, Surface Mount. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
26 Adjusting the Field of View: Indoor, Surface Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
27 Installing the Lower Dome: Indoor, Surface Mount. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
28 Fastening the Mounting Plate: Environmental/Vandal-Resistant, Surface Mount . . . . . . . . . . . . . . 35
29 Preparing the Cable Entry Holes: Environmental/Vandal-Resistant, Surface Mount . . . . . . . . . . . . 35
30 Installing the Surface Mounting Ring: Environmental/Vandal-Resistant, Surface Mount . . . . . . . . 36
31 Pulling the Wiring: Environmental/Vandal-Resistant, Surface Mount . . . . . . . . . . . . . . . . . . . . . . . 36
32 Connecting the Wiring: Environmental/Vandal-Resistant, Surface Mount. . . . . . . . . . . . . . . . . . . . 37
33 Installing the Camera: Environmental/Vandal-Resistant, Surface Mount. . . . . . . . . . . . . . . . . . . . . 38
34 Adjusting the Field of View: Environmental/Vandal-Resistant, Surface Mount . . . . . . . . . . . . . . . . 39
35 Installing the Lower Dome: Environmental/Vandal-Resistant, Surface Mount. . . . . . . . . . . . . . . . . 40
36 Cable Pin Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
37 Alarm/Relay/Audio Port Pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
38 Template for Surface Mount: Indoor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
39 Template for Surface Mount: Environmental/Vandal-Resistant . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

C2269M-A (11/13) 3

Important Notices

LEGAL NOTICE

SOME PELCO EQUIPMENT CONTAINS, AND THE SOFTWARE ENABLES, AUDIO/VISUAL AND RECORDING
CAPABILITIES, THE IMPROPER USE OF WHICH MAY SUBJECT YOU TO CIVIL AND CRIMINAL PENALTIES.
APPLICABLE LAWS REGARDING THE USE OF SUCH CAPABILITIES VARY BETWEEN JURISDICTIONS AND
MAY REQUIRE, AMONG OTHER THINGS, EXPRESS WRITTEN CONSENT FROM RECORDED SUBJECTS.
YOU ARE SOLELY RESPONSIBLE FOR INSURING STRICT COMPLIANCE WITH SUCH LAWS AND FOR
STRICT ADHERENCE TO ANY/ALL RIGHTS OF PRIVACY AND PERSONALTY. USE OF THIS EQUIPMENT
AND/OR SOFTWARE FOR ILLEGAL SURVEILLANCE OR MONITORING SHALL BE DEEMED UNAUTHORIZED
USE IN VIOLATION OF THE END USER SOFTWARE AGREEMENT AND RESULT IN THE IMMEDIATE
TERMINATION OF YOUR LICENSE RIGHTS THEREUNDER.

REGULATORY NOTICES

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.

RADIO AND TELEVISION INTERFERENCE

This equipment has been tested and found to comply with the limits of a Class A digital device, pursuant
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.

Changes and Modifications not expressly approved by the manufacturer or registrant of this equipment
can void your authority to operate this equipment under Federal Communications Commission’s rules.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

KOREAN CLASS A EMC

4 C2269M-A (11/13)

VIDEO QUALITY CAUTION

FRAME RATE NOTICE REGARDING USER-SELECTED OPTIONS

Pelco systems are capable of providing high quality video for both live viewing and playback. However, the
systems can be used in lower quality modes, which can degrade picture quality, to allow for a slower rate
of data transfer and to reduce the amount of video data stored. The picture quality can be degraded by
either lowering the resolution, reducing the picture rate, or both. A picture degraded by having a reduced
resolution may result in an image that is less clear or even indiscernible. A picture degraded by reducing
the picture rate has fewer frames per second, which can result in images that appear to jump or move
more quickly than normal during playback. Lower frame rates may result in a key event not being recorded
by the system.

Judgment as to the suitability of the products for users’ purposes is solely the users’ responsibility. Users
shall determine the suitability of the products for their own intended application, picture rate and picture
quality. In the event users intend to use the video for evidentiary purposes in a judicial proceeding or
otherwise, users should consult with their attorney regarding any particular requirements for such use.

OPEN SOURCE SOFTWARE NOTICE

This product includes certain open source or other software originated from third parties that is subject to
the GNU General Public License (GPL), GNU Library/Lesser General Public License (LGPL) and different
and/or additional copyright licenses, disclaimers, and notices.

The exact terms of GPL, LGPL, and some other licenses are provided to you with this product. Please refer
to the exact terms of the GPL and LGPL at http://www.fsf.org (Free Software Foundation) or http://
www.opensource.org (Open Source Initiative) regarding your rights under said license. You may obtain a
complete corresponding machine-readable copy of the source code of such software under the GPL or
LGPL by sending your request to [e-mail]; the subject line should read Source Code
Request. You will then receive an email with a link for you to download the source code.

This offer is valid for a period of three (3) years from the date of the distribution of this product by Pelco.

WARRANTY STATEMENT

For information about Pelco’s product warranty and thereto related information, refer to www.pelco.com/
warranty.

C2269M-A (11/13) 5

Introduction

The Sarix® IME Series IP cameras feature SureVision technology that seamlessly delivers advanced
low-light performance with wide dynamic range (WDR) and anti-bloom technologies that operate
simultaneously. They are part of Pelco’s Enhanced (E) range of cameras, providing industry-leading image
quality and performance.

The IME Series mini dome camera is easy to install, offers flexible mounting options, and uses a standard
Web browser for easy remote setup and administration.

The IME Series easily connects to Pelco IP and hybrid systems such as Endura
Digital Sentry
conformant with ONVIF Profile S for connection with third-party software. Pelco offers an application
programming interface (API) and software developer’s kit (SDK) for interfacing with Pelco’s IP cameras.

This document describes the installation and initial setup procedures to begin operating the camera. For
more information about operating your camera, refer to the operation manual specific to the product.

NOTE: For additional information about product documentation in English and other languages, go to
www.pelco.com/sarix and navigate to the IME Series Web page.

®

version 7.3 (or later), and DX4700/DX4800 hybrid video recorders. The camera is also

®

version 2.0 (or later),

6 C2269M-A (11/13)

MODELS

IMES19-1I
IME119-1I
IME219-1I
IME319-1I
IME319-B1I
IMES19-1S
IME119-1S
IME219-1S
IME319-1S
IME319-B1S
IMES19-1P
IME119-1P
IME219-1P
IME319-1P
IME319-B1P
IMES19-1EI
IME119-1EI
IME219-1EI
IME319-1EI
IMES19-1ES
IME119-1ES
IME219-1ES
IME319-1ES
IMES19-1EP
IME119-1EP
IME219-1EP
IME319-1EP
IMES19-1VI
IME119-1VI
IME219-1VI
IME319-1VI
IMES19-1VS
IME119-1VS
IME219-1VS
IME319-1VS
IMES19-1VP
IME119-1VP
IME219-1VP
IME319-1VP
IME3122-1I
IME3122-B1I
IME3122-1S
IME3122-B1S
IME3122-1P
IME3122-B1P
IME3122-1EI
IME3122-1ES

Indoor,

3 ~ 9 mm focal range, in-ceiling, standard definition, white
3 ~ 9 mm focal range, in-ceiling, 1 MPx, white

Indoor,

3 ~ 9 mm focal range, in-ceiling, 2 MPx, white

Indoor,

3 ~ 9 mm focal range, in-ceiling, 3 MPx, white

Indoor,

3 ~ 9 mm focal range, in-ceiling, 3 MPx, black

Indoor,

3 ~ 9 mm focal range, surface mount, standard definition, white

Indoor,

3 ~ 9 mm focal range, surface mount, 1 MPx, white

Indoor,

3 ~ 9 mm focal range, surface mount, 2 MPx, white

Indoor,

3 ~ 9 mm focal range, surface mount, 3 MPx, white

Indoor,

3 ~ 9 mm focal range, surface mount, 3 MPx, black

Indoor,

3 ~ 9 mm focal range, pendant, standard definition, white

Indoor,

3 ~ 9 mm focal range, pendant, 1 MPx, white

Indoor,

3 ~ 9 mm focal range, pendant, 2 MPx, white

Indoor,

3 ~ 9 mm focal range, pendant, 3 MPx, white

Indoor,

3 ~ 9 mm focal range, pendant, 3 MPx, black

Indoor,
Environmental,
Environmental,
Environmental,
Environmental,
Environmental,
Environmental,
Environmental,
Environmental,
Environmental,
Environmental,
Environmental,
Environmental,
Vandal-resistant,
Vandal-resistant,
Vandal-resistant,
Vandal-resistant,
Vandal-resistant,
Vandal-resistant,
Vandal-resistant,
Vandal-resistant,
Vandal-resistant,
Vandal-resistant,
Vandal-resistant,
Vandal-resistant,
Indoor,
Indoor,
Indoor,
Indoor,
Indoor,
Indoor,
Environmental,
Environmental,

3 ~ 9 mm focal range, in-ceiling, standard definition, light gray
3 ~ 9 mm focal range, in-ceiling, 1 MPx, light gray
3 ~ 9 mm focal range, in-ceiling, 2 MPx, light gray
3 ~ 9 mm focal range, in-ceiling, 3 MPx, light gray
3 ~ 9 mm focal range, surface mount, standard definition, light gray
3 ~ 9 mm focal range, surface mount, 1 MPx, light gray
3 ~ 9 mm focal range, surface mount, 2 MPx, light gray
3 ~ 9 mm focal range, surface mount, 3 MPx, light gray
3 ~ 9 mm focal range, pendant, standard definition, light gray
3 ~ 9 mm focal range, pendant, 1 MPx, light gray
3 ~ 9 mm focal range, pendant, 2 MPx, light gray
3 ~ 9 mm focal range, pendant, 3 MPx, light gray

3 ~ 9 mm focal range, in-ceiling, standard definition, light gray
3 ~ 9 mm focal range, in-ceiling, 1 MPx, light gray
3 ~ 9 mm focal range, in-ceiling, 2 MPx, light gray
3 ~ 9 mm focal range, in-ceiling, 3 MPx, light gray
3 ~ 9 mm focal range, surface mount, standard definition, light gray
3 ~ 9 mm focal range, surface mount, 1 MPx, light gray
3 ~ 9 mm focal range, surface mount, 2 MPx, light gray
3 ~ 9 mm focal range, surface mount, 3 MPx, light gray
3 ~ 9 mm focal range, pendant, standard definition, light gray
3 ~ 9 mm focal range, pendant, 1 MPx, light gray
3 ~ 9 mm focal range, pendant, 2 MPx, light gray

3 ~ 9 mm focal range, pendant, 3 MPx, light gray
9 ~ 22 mm focal range, in-ceiling, 3 MPx, white
9 ~ 22 mm focal range, in-ceiling, 3 MPx, black
9 ~ 22 mm focal range, surface mount, 3 MPx, white
9 ~ 22 mm focal range, surface mount, 3 MPx, black
9 ~ 22 mm focal range, pendant, 3 MPx, white
9 ~ 22 mm focal range, pendant, 3 MPx, black

9 ~ 22 mm focal range, in-ceiling, 3 MPx, light gray
9 ~ 22 mm focal range, surface mount, 3 MPx, light gray

C2269M-A (11/13) 7

IME3122-1EP
IME3122-1VI
IME3122-1VS
IME3122-1VP

Environmental,
Vandal-resistant,
Vandal-resistant,
Vandal-resistant,

9 ~ 22 mm focal range, pendant, 3 MPx, light gray

9 ~ 22 mm focal range, in-ceiling, 3 MPx, light gray

9 ~ 22 mm focal range, surface mount, 3 MPx, light gray

9 ~ 22 mm focal range, pendant, 3 MPx, light gray

RECOMMENDED MOUNTS

WMVE-SR Wall mount, light gray; for use with environmental and vandal-resistant pendant mount

WMVE-SW Wall mount, white; for use with indoor pendant mount options
PA101 Pole adapter for use with WMVE-SR wall mount

options

OPTIONAL ACCESSORIES

IPCT01 Pelco IP camera tester*
ALM-1 External alarm accessory
POE20U560G Single port PoE injector
IMELLD1-0I Lower dome assembly, smoked, in-ceiling, white
IMELLD1-0BI Lower dome assembly, smoked, in-ceiling, black
IMELD1-0S Lower dome assembly, smoked, surface mount/pendant, white
IMELD1-0BS Lower dome assembly, smoked, surface mount/pendant, black
IMELD1-0V Lower dome (bubble only), smoked, environmental/vandal-resistant
IMELD1-1V Lower dome (bubble only), clear, environmental/vandal-resistant

*Contact Pelco Product Support for more information about the use of the Pelco IP camera tester with

cameras.

8 C2269M-A (11/13)

Getting Started

Before installing your device, thoroughly familiarize yourself with the information in the installation
section of this manual.

NOTES:

• Pelco recommends connecting the device to a network that uses a Dynamic Host Configuration
Protocol (DHCP) server to address devices.

• Do not use a network hub when configuring the network settings for the device.

• To ensure secure access, place the device behind a firewall when it is connected to a network.

IN-CEILING MODELS

SUPPLIED PARTS LIST

Qty Description

1 Camera
1 Back box
1 Lower dome
1Bit
1 8-pin connector for Alarm/Relay/Audio port
4 MAC address labels (extra)
1 IME Series Mini Dome IP Camera Installation manual
1 Important Safety Instructions
1 Resource disc

USER-SUPPLIED PARTS LIST

In addition to the standard tools and cables required for a video security installation, you will need to
provide the following items:

Qty Description

1 Pipe/conduit (if applicable)
1 Conduit adapters (if applicable)
1 RJ-45 connector to terminate wires
1 Cat5 (or higher) cable
1 #2 Phillips screwdriver
1 24 AWG, 8-wire multiconductor cable (if using alarm, relays, and/or

line-in and line-out audio)

C2269M-A (11/13) 9

SURFACE MOUNT MODELS

SUPPLIED PARTS LIST

Qty Description

1 Camera
1 Mounting plate
1 Surface mounting ring (for environmental and vandal-resistant models)
1 Lower dome
1Bit
1 8-pin connector for Alarm/Relay/Audio port
4 MAC address labels (extra)
1 IME Series Mini Dome IP Camera Installation manual
1 Important Safety Instructions
1 Resource disc

USER-SUPPLIED PARTS LIST

In addition to the standard tools and cables required for a video security installation, you will need to
provide the following items:

Qty Description

1 Mounting substrate and fasteners for indoor surface mount (one of the

following):

• Standard single-gang electrical box and appropriate fasteners

• Any substrate using 2 standard screws, size M4 or #8 hardware

1 Mounting substrate and fasteners for environmental and vandal-resistant

surface mount (one of the following):

• Standard 4 in. square electrical box and appropriate fasteners

• Standard 2-gang electrical box and appropriate fasteners

• Any substrate using 3 standard screws, size M6 or 1/4 in. hardware

1 Pipe/conduit (environmental and vandal-resistant models, if applicable)
1 Conduit adapters (environmental and vandal-resistant models, if

applicable)

1 Cat5 (or higher) cable
1 RJ-45 connector
1 24 AWG, 8-wire multiconductor cable (if using alarm, relays, and/or

line-in and line-out audio)

10 C2269M-A (11/13)

PENDANT MODELS

SUPPLIED PARTS LIST

Qty Description

1 Camera
1 Pendant mount
1 Lower dome
1Bit
1 8-pin connector for Alarm/Relay/Audio port
4 MAC address labels (extra)
1 IME Series Mini Dome IP Camera Installation manual
1 Important Safety Instructions
1 Resource disc

USER-SUPPLIED PARTS LIST

In addition to the standard tools and cables required for a video security installation, you will need to
provide the following items:

Qty Description

1 Pipe/conduit (if applicable)
1 Pipe nipple adapters (if using pipe/conduit)
1 Cat5 (or higher) cable
1 WMVE-SR (if using the wall mount for environmental and vandal-resistant

pendant models)

1 WMVE-SW (if using the wall mount for indoor pendant models)
1 RJ-45 connector
1 24 AWG, 8-wire multiconductor cable (if using alarm, relays, or line-in and

line-out audio)

C2269M-A (11/13) 11

Product Overview

Figure 1. Camera Ports and LEDs

RJ-45 Network Port: Connects the camera to the IP network. Also supplies power to the camera (PoE),

ì

through the same connector.
Ethernet Activity/Link LED: Flashes green to indicate that data is being transmitted or received by the

î

camera. Glows solid amber to indicate that a live network connection is established.

ï

Accessory Port: Connects with compatible Pelco accessories.

ñ

Alarm/Relay/Audio Port: Connects to alarms, relays, and audio in/out.

ó

Microphone: Connects to built-in microphone on indoor and vandal-resistant models.
Reset Button: Reboots the camera or restores the camera’s factory default settings. This button is

r

recessed. Using a small tool, such as a paper clip, press and release the reset button once to reboot the
camera. Press and hold the reset button for 10 seconds to restore the camera to the factory default
settings.
Power LED: Flashes green during the configuration sequence; glows solid green after the sequence is

s

complete. The LED can be disabled. If this LED glows red (solid or flashing), contact Pelco Product Support
at 1-800-289-9100 (USA and Canada) or [phone] (international) for assistance.

t

Micro SD Slot: Connects to local storage.

For cable terminations, refer to Cable Terminations on page 41.

12 C2269M-A (11/13)

Installation

You can install the IME Series mini domes using one of the following methods:

• Installation in a suspended ceiling or a fixed ceiling. Refer to In-Ceiling: Indoor and Environmental/
Vandal-Resistant on page 14.

• Installation using a pendant mount. Refer to Pendant: Indoor on page 20 and Pendant:
Environmental/Vandal-Resistant on page 25.

• Installation on a wall or a fixed ceiling. Refer to Surface Mount: Indoor on page 30 and Surface
Mount: Environmental/Vandal-Resistant on page 35.

Figure 2. Plastic Retaining Ring

C2269M-A (11/13) 13

IN-CEILING: INDOOR AND ENVIRONMENTAL/VANDAL-RESISTANT

a. b1. b2.

1. Locate the center point of the mounting location in the ceiling.

2. For Environmental and Vandal-Resistant models, cut a 17.15 cm (6.75 in.) hole in the ceiling. For
Indoor models, cut a 15.24 cm (6.0 in.) hole in the ceiling. Using a hole saw is recommended.

3. Pull the wiring through the hole.

Figure 3. Cutting the Hole: In-Ceiling

4. Prepare the wire entry holes in the back box as follows:
a. Remove either the conduit plug (side) or grommet (top) for side or top wire entry.

b. Prepare the wire entry holes as follows:

(1) If using conduit (not supplied): Replace with 25 mm or 3/4 in. conduit adapters (not

supplied).

(2) If using the grommet (plenum rating is not required): Put the grommet (supplied)

aside for use in a later step.

Figure 4. Preparing the Cable Entry Holes: In-Ceiling

14 C2269M-A (11/13)

5. Install the back box as follows:
a. Compress the spring paddles on the back box. For Indoor models, make sure that the support

wings are rotated inward.

b. Push the back box through the hole.

c. Tighten the two mounting screws to secure the back box. For Indoor models, use the bit

(supplied).

d. Feed the wires as follows:

• If using conduit (not supplied): Feed wires through the conduit adapter, into the back

box, and attach the conduit to the adapter.

• If using the grommet (supplied): Feed the wires into the back box, pass the

unterminated cables through the grommet, and insert the grommet in either the side or
top entry.

e. Replace the other entry opening with the conduit plug (supplied).

f. Terminate the wires with the appropriate connector (not supplied).

Figure 5. Installing the Back Box: In-Ceiling

C2269M-A (11/13) 15

6. Connect the wiring to the camera as follows:
a. Connect the network cable to the RJ-45 network port on the base of the camera.

b. Connect the Micro USB cable and optional multiconductor cable as follows:

• If using a Pelco accessory: Perform step 5d on page 15 with the grommet and the

Micro B USB cable that is supplied with the Pelco accessory. Connect the Micro B USB
cable to the accessory port on the base of the camera.

NOTE: Remove this accessory before completing the installation.

• (Optional) If using alarms, relays, or audio: Connect a 24 AWG, 8-wire

multiconductor cable to the 8-pin removable connector (supplied), and then insert the
connector back into the base of the camera. This cable is for alarms, relays, and audio
line-in and line-out.

NOTE: For cable terminations, refer to Cable Terminations on page 41.

Figure 6. Connecting the Wiring: In-Ceiling

16 C2269M-A (11/13)