Pelco IME319-1EI, IME3122-1ES, IME3122-1EP, IME3122-1EI, IME219-1S User Manual

I N S T A L L A T I O N

IME Series

Network Mini Domes

Sarix® Cameras with SureVision Technology

C2269M (7/13)

2	C2269M (7/13)

Contents

Important Notices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Legal Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Regulatory Notices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Warranty Statement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Recommended Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

In-Ceiling Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Supplied Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

User-Supplied Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Surface Mount Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Supplied Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

User-Supplied Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Pendant Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Supplied Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

User-Supplied Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

In-Ceiling: Indoor and Environmental/Vandal-Resistant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Pendant: Indoor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Pendant: Environmental/Vandal-Resistant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Surface Mount: Indoor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Surface Mount: Environmental/Vandal-Resistant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Cable Terminations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Ethernet Wiring Requirement for PoE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Alarm/Relay/Audio Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

IP Address Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Logging On to the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Surface Mount Templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

C2269M (7/13)

3

List of Illustrations

1 Camera Ports and LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 2 Plastic Retaining Ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 3 Cutting the Hole: In-Ceiling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 4 Preparing the Cable Entry Holes: In-Ceiling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 5 Installing the Back Box: In-Ceiling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 6 Connecting the Wiring: In-Ceiling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 7 Installing the Camera: In-Ceiling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 8 Adjusting the Field of View: In-Ceiling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 9 Installing the Lower Dome: In-Ceiling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 10 Installing the Pendant Mount: Indoor, Pendant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 11 Pulling the Wiring: Indoor, Pendant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 12 Connecting the Wiring: Indoor, Pendant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 13 Installing the Camera: Indoor, Pendant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 14 Adjusting the Field of View: Indoor, Pendant. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 15 Installing the Lower Dome: Indoor, Pendant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 16 Installing the Pendant Mount: Environmental/Vandal-Resistant, Pendant . . . . . . . . . . . . . . . . . . . . 25 17 Pulling the Wiring: Environmental/Vandal-Resistant, Pendant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 18 Connecting the Wiring: Environmental/Vandal-Resistant, Pendant . . . . . . . . . . . . . . . . . . . . . . . . . 26 19 Installing the Camera: Environmental/Vandal-Resistant, Pendant . . . . . . . . . . . . . . . . . . . . . . . . . . 27 20 Adjusting the Field of View: Environmental/Vandal-Resistant, Pendant . . . . . . . . . . . . . . . . . . . . . 28 21 Installing the Lower Dome: Environmental/Vandal-Resistant, Pendant . . . . . . . . . . . . . . . . . . . . . . 29 22 Fastening the Mounting Plate: Indoor, Surface Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 23 Pulling the Wiring: Indoor, Surface Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 24 Connecting the Wiring: Indoor, Surface Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 25 Installing the Camera: Indoor, Surface Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 26 Adjusting the Field of View: Indoor, Surface Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 27 Installing the Lower Dome: Indoor, Surface Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 28 Fastening the Mounting Plate: Environmental/Vandal-Resistant, Surface Mount . . . . . . . . . . . . . . 35 29 Preparing the Cable Entry Holes: Environmental/Vandal-Resistant, Surface Mount . . . . . . . . . . . . 35 30 Installing the Surface Mounting Ring: Environmental/Vandal-Resistant, Surface Mount . . . . . . . . 36 31 Pulling the Wiring: Environmental/Vandal-Resistant, Surface Mount . . . . . . . . . . . . . . . . . . . . . . . 36 32 Connecting the Wiring: Environmental/Vandal-Resistant, Surface Mount. . . . . . . . . . . . . . . . . . . . 37 33 Installing the Camera: Environmental/Vandal-Resistant, Surface Mount. . . . . . . . . . . . . . . . . . . . . 38 34 Adjusting the Field of View: Environmental/Vandal-Resistant, Surface Mount . . . . . . . . . . . . . . . . 39 35 Installing the Lower Dome: Environmental/Vandal-Resistant, Surface Mount. . . . . . . . . . . . . . . . . 39 36 Cable Pin Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 37 Alarm/Relay/Audio Port Pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 38 Template for Surface Mount: Indoor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 39 Template for Surface Mount: Environmental/Vandal-Resistant . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

4	C2269M (7/13)

Important Notices

LEGAL NOTICE

SOME PELCO EQUIPMENT CONTAINS, AND THE SOFTWARE ENABLES, AUDIO/VISUAL AND RECORDING CAPABILITIES, THE IMPROPER USE OF WHICH MAY SUBJECT YOU TO CIVIL AND CRIMINAL PENALTIES. APPLICABLE LAWS REGARDING THE USE OF SUCH CAPABILITIES VARY BETWEEN JURISDICTIONS AND MAY REQUIRE, AMONG OTHER THINGS, EXPRESS WRITTEN CONSENT FROM RECORDED SUBJECTS.

YOU ARE SOLELY RESPONSIBLE FOR INSURING STRICT COMPLIANCE WITH SUCH LAWS AND FOR STRICT ADHERENCE TO ANY/ALL RIGHTS OF PRIVACY AND PERSONALTY. USE OF THIS EQUIPMENT AND/OR SOFTWARE FOR ILLEGAL SURVEILLANCE OR MONITORING SHALL BE DEEMED UNAUTHORIZED USE IN VIOLATION OF THE END USER SOFTWARE AGREEMENT AND RESULT IN THE IMMEDIATE TERMINATION OF YOUR LICENSE RIGHTS THEREUNDER.

REGULATORY NOTICES

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RADIO AND TELEVISION INTERFERENCE

This equipment has been tested and found to comply with the limits of a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Changes and Modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority to operate this equipment under Federal Communications Commission’s rules.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

WARRANTY STATEMENT

For information about Pelco’s product warranty and thereto related information, refer to www.pelco.com/ warranty.

C2269M (7/13)

5

Introduction

The Sarix® IME Series IP cameras feature SureVision technology that seamlessly delivers advanced low-light performance with wide dynamic range (WDR) and anti-bloom technologies that operate simultaneously. They are part of Pelco’s Enhanced (E) range of cameras, providing industry-leading image quality and performance.

The IME Series mini dome camera is easy to install, offers flexible mounting options, and uses a standard Web browser for easy remote setup and administration.

The IME Series easily connects to Pelco IP and hybrid systems such as Endura® version 2.0 (or later), Digital Sentry® version 7.3 (or later), and DX4700/DX4800 hybrid video recorders. The camera is also conformant with ONVIF Profile S for connection with third-party software. Pelco offers an application programming interface (API) and software developer’s kit (SDK) for interfacing with Pelco’s IP cameras.

This document describes the installation and initial setup procedures to begin operating the camera. For more information about operating your camera, refer to the operation manual specific to the product.

NOTE: For additional information about product documentation in English and other languages, go to www.pelco.com/sarix and navigate to the IME Series Web page.

6	C2269M (7/13)

MODELS

IMES19-1I	Indoor, 3 ~ 9 mm focal range, in-ceiling, standard definition, white
IME119-1I	Indoor, 3 ~ 9 mm focal range, in-ceiling, 1 MPx, white
IME219-1I	Indoor, 3 ~ 9 mm focal range, in-ceiling, 2 MPx, white
IME319-1I	Indoor, 3 ~ 9 mm focal range, in-ceiling, 3 MPx, white
IME319-B1I	Indoor, 3 ~ 9 mm focal range, in-ceiling, 3 MPx, black
IMES19-1S	Indoor, 3 ~ 9 mm focal range, surface mount, standard definition, white
IME119-1S	Indoor, 3 ~ 9 mm focal range, surface mount, 1 MPx, white
IME219-1S	Indoor, 3 ~ 9 mm focal range, surface mount, 2 MPx, white
IME319-1S	Indoor, 3 ~ 9 mm focal range, surface mount, 3 MPx, white
IME319-B1S	Indoor, 3 ~ 9 mm focal range, surface mount, 3 MPx, black
IMES19-1P	Indoor, 3 ~ 9 mm focal range, pendant, standard definition, white
IME119-1P	Indoor, 3 ~ 9 mm focal range, pendant, 1 MPx, white
IME219-1P	Indoor, 3 ~ 9 mm focal range, pendant, 2 MPx, white
IME319-1P	Indoor, 3 ~ 9 mm focal range, pendant, 3 MPx, white
IME319-B1P	Indoor, 3 ~ 9 mm focal range, pendant, 3 MPx, black
IMES19-1EI	Environmental, 3 ~ 9 mm focal range, in-ceiling, standard definition, light gray
IME119-1EI	Environmental, 3 ~ 9 mm focal range, in-ceiling, 1 MPx, light gray
IME219-1EI	Environmental, 3 ~ 9 mm focal range, in-ceiling, 2 MPx, light gray
IME319-1EI	Environmental, 3 ~ 9 mm focal range, in-ceiling, 3 MPx, light gray
IMES19-1ES	Environmental, 3 ~ 9 mm focal range, surface mount, standard definition, light gray
IME119-1ES	Environmental, 3 ~ 9 mm focal range, surface mount, 1 MPx, light gray
IME219-1ES	Environmental, 3 ~ 9 mm focal range, surface mount, 2 MPx, light gray
IME319-1ES	Environmental, 3 ~ 9 mm focal range, surface mount, 3 MPx, light gray
IMES19-1EP	Environmental, 3 ~ 9 mm focal range, pendant, standard definition, light gray
IME119-1EP	Environmental, 3 ~ 9 mm focal range, pendant, 1 MPx, light gray
IME219-1EP	Environmental, 3 ~ 9 mm focal range, pendant, 2 MPx, light gray
IME319-1EP	Environmental, 3 ~ 9 mm focal range, pendant, 3 MPx, light gray
IMES19-1VI	Vandal-resistant, 3 ~ 9 mm focal range, in-ceiling, standard definition, light gray
IME119-1VI	Vandal-resistant, 3 ~ 9 mm focal range, in-ceiling, 1 MPx, light gray
IME219-1VI	Vandal-resistant, 3 ~ 9 mm focal range, in-ceiling, 2 MPx, light gray
IME319-1VI	Vandal-resistant, 3 ~ 9 mm focal range, in-ceiling, 3 MPx, light gray
IMES19-1VS	Vandal-resistant, 3 ~ 9 mm focal range, surface mount, standard definition, light gray
IME119-1VS	Vandal-resistant, 3 ~ 9 mm focal range, surface mount, 1 MPx, light gray
IME219-1VS	Vandal-resistant, 3 ~ 9 mm focal range, surface mount, 2 MPx, light gray
IME319-1VS	Vandal-resistant, 3 ~ 9 mm focal range, surface mount, 3 MPx, light gray
IMES19-1VP	Vandal-resistant, 3 ~ 9 mm focal range, pendant, standard definition, light gray
IME119-1VP	Vandal-resistant, 3 ~ 9 mm focal range, pendant, 1 MPx, light gray
IME219-1VP	Vandal-resistant, 3 ~ 9 mm focal range, pendant, 2 MPx, light gray
IME319-1VP	Vandal-resistant, 3 ~ 9 mm focal range, pendant, 3 MPx, light gray
IME3122-1I	Indoor, 9 ~ 22 mm focal range, in-ceiling, 3 MPx, white
IME3122-B1I	Indoor, 9 ~ 22 mm focal range, in-ceiling, 3 MPx, black
IME3122-1S	Indoor, 9 ~ 22 mm focal range, surface mount, 3 MPx, white
IME3122-B1S	Indoor, 9 ~ 22 mm focal range, surface mount, 3 MPx, black
IME3122-1P	Indoor, 9 ~ 22 mm focal range, pendant, 3 MPx, white
IME3122-B1P	Indoor, 9 ~ 22 mm focal range, pendant, 3 MPx, black
IME3122-1EI	Environmental, 9 ~ 22 mm focal range, in-ceiling, 3 MPx, light gray
IME3122-1ES	Environmental, 9 ~ 22 mm focal range, surface mount, 3 MPx, light gray

C2269M (7/13)

7

IME3122-1EP	Environmental, 9 ~ 22 mm focal range, pendant, 3 MPx, light gray
IME3122-1VI	Vandal-resistant, 9	~ 22 mm focal range, in-ceiling, 3 MPx, light gray
IME3122-1VS	Vandal-resistant, 9	~ 22 mm focal range, surface mount, 3 MPx, light gray
IME3122-1VP	Vandal-resistant, 9	~ 22 mm focal range, pendant, 3 MPx, light gray

RECOMMENDED MOUNTS

WMVE-SR	Wall mount, light gray; for use with environmental and vandal-resistant pendant mount
	options
WMVE-SW	Wall mount, white; for use with indoor pendant mount options
PA101	Pole adapter for use with WMVE-SR wall mount
OPTIONAL ACCESSORIES
IPCT01	Pelco IP camera tester*
ALM-1	External alarm accessory
POE20U560G	Single port PoE injector
IMELD1-0I	Lower dome, smoked, in-ceiling, white
IMELD1-0BI	Lower dome, smoked, in-ceiling, black
IMELD1-0S	Lower dome, smoked, surface mount/pendant, white
IMELD1-0BS	Lower dome, smoked, surface mount/pendant, black
IMELD1-0V	Lower dome, smoked, environmental/vandal-resistant, bubble only
IMELD1-1V	Lower dome, clear, environmental/vandal-resistant, bubble only

*Contact Pelco Product Support for more information about the use of the Pelco IP camera tester with cameras.

8	C2269M (7/13)

Getting Started

Before installing your device, thoroughly familiarize yourself with the information in the installation section of this manual.

NOTES:

•Pelco recommends connecting the device to a network that uses a Dynamic Host Configuration Protocol (DHCP) server to address devices.

•Do not use a network hub when configuring the network settings for the device.

•To ensure secure access, place the device behind a firewall when it is connected to a network.

IN-CEILING MODELS

SUPPLIED PARTS LIST

Qty	Description
1	Camera
1	Back box
1	Lower dome
1	Bit
1	8-pin connector for Alarm/Relay/Audio port
4	MAC address labels (extra)
1	IME Series Mini Dome IP Camera Installation manual
1	Important Safety Instructions
1	Resource disc

USER-SUPPLIED PARTS LIST

In addition to the standard tools and cables required for a video security installation, you will need to provide the following items:

Qty Description

1 Pipe/conduit (if applicable)

1 Conduit adapters (if applicable)

1 RJ-45 connector to terminate wires

1 Cat5 (or higher) cable

1 #2 Phillips screwdriver

124 AWG, 8-wire multiconductor cable (if using alarm, relays, and/or line-in and line-out audio)

C2269M (7/13)

9

SURFACE MOUNT MODELS

SUPPLIED PARTS LIST

Qty	Description
1	Camera
1	Mounting plate
1	Surface mounting ring (for environmental and vandal-resistant models)
1	Lower dome
1	Bit
1	8-pin connector for Alarm/Relay/Audio port
4	MAC address labels (extra)
1	IME Series Mini Dome IP Camera Installation manual
1	Important Safety Instructions
1	Resource disc

USER-SUPPLIED PARTS LIST

In addition to the standard tools and cables required for a video security installation, you will need to provide the following items:

Qty Description

1Mounting substrate and fasteners for indoor surface mount as follows:

•standard single-gang electrical box and appropriate fasteners or

•any substrate using 2 standard screws, size M4 or #8 hardware

1Mounting substrate and fasteners for environmental and vandal-resistant surface mount as follows:

•standard 4 in. square electrical box and appropriate fasteners, or

•standard 2-gang electrical box and appropriate fasteners or

•any substrate using 3 standard screws, size M6 or 1/4 in. hardware

1 Pipe/conduit (environmental and vandal-resistant models, if applicable)

1Conduit adapters (environmental and vandal-resistant models, if applicable)

1 Cat5 (or higher) cable

1 RJ-45 connector

124 AWG, 8-wire multiconductor cable (if using alarm, relays, and/or line-in and line-out audio)

10	C2269M (7/13)

PENDANT MODELS

SUPPLIED PARTS LIST

Qty	Description
1	Camera
1	Pendant mount
1	Lower dome
1	Bit
1	8-pin connector for Alarm/Relay/Audio port
4	MAC address labels (extra)
1	IME Series Mini Dome IP Camera Installation manual
1	Important Safety Instructions
1	Resource disc

USER-SUPPLIED PARTS LIST

In addition to the standard tools and cables required for a video security installation, you will need to provide the following items:

Qty Description

1 Pipe/conduit (if applicable)

1 Pipe nipple adapters (if using pipe/conduit)

1 Cat5 (or higher) cable

1WMVE-SR (if using the wall mount for environmental and vandal-resistant pendant models)

1 WMVE-SW (if using the wall mount for indoor pendant models) 1 RJ-45 connector

124 AWG, 8-wire multiconductor cable (if using alarm, relays, or line-in and line-out audio)

C2269M (7/13)

11

Product Overview

Figure 1. Camera Ports and LEDs

ìRJ-45 Network Port: Connects the camera to the IP network. Also supplies power to the camera (PoE), through the same connector.

îEthernet Activity/Link LED: Flashes green to indicate that data is being transmitted or received by the camera. Glows solid amber to indicate that a live network connection is established.

ïAccessory Port: Connects with compatible Pelco accessories.

ñAlarm/Relay/Audio Port: Connects to alarms, relays, and audio in/out.

óMicrophone: Connects to built-in microphone on indoor and vandal-resistant models.

rReset Button: Reboots the camera or restores the camera’s factory default settings. This button is recessed. Using a small tool, such as a paper clip, press and release the reset button once to reboot the camera. Press and hold the reset button for 10 seconds to restore the camera to the factory default settings.

sPower LED: Flashes green during the configuration sequence; glows solid green after the sequence is complete. The LED can be disabled. If this LED glows red (solid or flashing), contact Pelco Product Support at 1-800-289-9100 (USA and Canada) or [phone] (international) for assistance.

tMicro SD Slot: Connects to local storage.

For cable terminations, refer to Cable Terminations on page 40.

12	C2269M (7/13)

Installation

You can install the IME Series mini domes using one of the following methods:

•Installation in a suspended ceiling or a fixed ceiling. Refer to In-Ceiling: Indoor and Environmental/ Vandal-Resistant on page 14.

•Installation using a pendant mount. Refer to Pendant: Indoor on page 20 and Pendant: Environmental/Vandal-Resistant on page 25.

•Installation on a wall or a fixed ceiling. Refer to Surface Mount: Indoor on page 30 and Surface Mount: Environmental/Vandal-Resistant on page 35.

Figure 2. Plastic Retaining Ring

C2269M (7/13)

13

IN-CEILING: INDOOR AND ENVIRONMENTAL/VANDAL-RESISTANT

1.Locate the center point of the mounting location in the ceiling.

2.Cut a 17.145 cm (6.75 in.) hole in the ceiling. Using a hole saw is recommended.

3.Pull the wiring through the hole.

Figure 3. Cutting the Hole: In-Ceiling

4.Prepare the cable entry holes in the back box for either side or top entry as follows:

a.Remove the conduit plug for either side or top entry.

b.Prepare the cable entry holes as follows:

•(1) If using conduit (not supplied): Replace with 25 mm or 3/4 in. conduit adapters (not supplied).

•(2) If using the grommet (plenum rating is not required): Use the grommet (supplied). Remove the grommet from the back box.

a.

b1.

b2.

Figure 4. Preparing the Cable Entry Holes: In-Ceiling

14	C2269M (7/13)

5.Install the back box as follows:

a.Compress the spring paddles on the back box.

b.Push the back box through the hole.

c.Tighten the two mounting screws to secure the back box.

d.Feed the wires as follows:

•If using conduit (not supplied): Feed wires through the conduit adapter, into the back box, and attach the conduit to the adapter.

•If using the grommet (supplied): Feed the wires into the back box, pass the unterminated cables through the grommet, and insert the grommet in either the side or top entry.

e.Replace the other entry opening with the conduit plug (supplied).

f.Terminate the wires with the appropriate connector (not supplied).

Figure 5. Installing the Back Box: In-Ceiling

C2269M (7/13)

15

6.Connect the wiring to the camera as follows:

a.Connect the network cable to the RJ-45 network port on the base of the camera.

b.Connect the Micro USB cable and optional multiconductor cable as follows:

•If using a permanently installed Pelco accessory: Perform step 5d on page 15 with the grommet and the Micro B USB cable that is supplied with the Pelco accessory. Connect the Micro B USB cable to the accessory port on the base of the camera.

NOTE: Remove this accessory before completing the installation.

•(Optional) If using alarms, relays, or audio: Connect a 24 AWG, 8-wire multiconductor cable to the 8-pin removable connector (supplied), and then insert the connector back into the base of the camera. This cable is for alarms, relays, and audio line-in and line-out.

NOTE: For cable terminations, refer to Cable Terminations on page 40.

Figure 6. Connecting the Wiring: In-Ceiling

16	C2269M (7/13)