Installation and Assembly:
Desktop Mount with Desk Clamp and Grommet for 19" - 30"
LCD Screens
Models: LCT420A, LCT620A
LCT420A
Max Load Capacity: 15 lbs (6.8 kg)
2300 White Oak Circle • Aurora, Il 60502 • (800) 865-2112 • Fax: (800) 359-6500 • www.peerlessmounts.com
ISSUED: 07-25-11 SHEET #: 090-9203-5 10-22-12
LCT620A
NOTE: Read entire instruction sheet before you start installation and assembly.
WARNING
• Do not begin to install your Peerless product until you have read and understood the instructions and warnings
contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, please
call Peerless customer care at 1-800-865-2112.
• This product should only be installed by someone of good mechanical aptitude, has experience with basic building
construction, and fully understands these instructions.
• Make sure that the supporting surface will safely support the combined load of the equipment and all attached
hardware and components.
• Never exceed the Maximum Load Capacity. See page 1.
• Always use an assistant or mechanical lifting equipment to safely lift and position equipment.
• Tighten screws fi rmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding
power.
• This product is intended for indoor use only. Use of this product outdoors could lead to product failure and personal
injury.
Tools Needed for Assembly
• phillips screwdriver
• drill
• 3/8" (10 mm) drill bit
Table of Contents
Parts List.................................................................................................................................................................................3
Installation to Mounting Surface .............................................................................................................................................4
Attaching Adapter Plate to Screen..........................................................................................................................................5
Cable Management ................................................................................................................................................................6
2 of 8
ISSUED: 07-25-11 SHEET #: 090-9203-5 10-22-12
yQty
Before you begin, make sure all parts shown are included
with your product.
A
Parts List
LCT420A LCT620A
Description
A column assembly 1 1
B single link arm assembly 1 -
double link arm assembly - 1
C grommet assembly 1 1
D round rubber pads 2 2
E square rubber pads
F M4 x 12 mm phillips screw
G M4 x 25 mm phillips screw
H spacer 4
I 4 mm allen wrench 1
J 2.5 mm allen wrench 1
K cable clip
L cable tie
M adapter bracket
Parts may appear slightly different than illustrated.
Qt
2
4
44
11
55
11
B
C
2
4
4
1
1
LCT420A LCT620A
OR
J
K
I
L
D
E
FGH
M
3 of 8
ISSUED: 07-25-11 SHEET #: 090-9203-5 10-22-12
Loading...