Panasonic SC-HTB20 Quick Start Manual
Quick Start Guide
Push
Insert the wire fully while
pushing the lever.
r: White
s: Blue line
2
2
1
1
Insert the wire fully
while pushing the
lever.
r: White
s: Blue line
Push
Pull the cable straight along
the line and slide into the
groove.
≥ Be sure to place the cable under
the projecting part.
Front view Rear view
Push
≥ Place the speaker that is connected with the speaker cable with a red connector on the observers’ right, and connect
with the speaker cable with a white connector on the observers’ left.
Home Theater Audio System SC-HTB20
Step 1: Choose in the configuration that is right for you
Place the speakers
horizontally
To prevent damage or scratches, lay down a soft cloth
and perform the assembly on it.
1
2
4
3
Place the speakers
vertically
To prevent damage or scratches, lay down a soft cloth
and perform the assembly on it.
If you have any questions, contact:
VQC8931-1
U.S.A. and Puerto Rico: 1-800-211-P ANA (7262)
Mon-Fri: 9 ams9 pm (EST) Lunes-Viernes
Sat-Sun: 10 ams7 pm (EST) Sabado-Domingo
http://www.panasonic.com/help
Canada:
Telephone: 1-800-561-5505
E-mail link: “Support
# contact us # email” on www.panasonic.ca
Step 2: Connect the cables
TV
Active subwoofer
HDMI cable
Be sure to conn e c t to the TV’s ARC
compatible terminal. (Refer to the
TV’s Owner’s Manual.)
Red
White
To a household AC outlet
AC power
supply cord
HDMI (ARC)
Audio Return Channel:
Allows a home theater
system to receive and
play audio from the TV
through a HDMI cable
without additional wiring.
TV
Active subwoofer
HDMI cable
Optical digital
audio cable
Red
White
To a household AC outlet
AC power
supply cord
HDMI cable is required
for VIERA Link “HDAVI
Control”
e.g. TV remote control
e.g. TV remote control
Do not connect the AC power supply cord to the active subwoofer until all
other connections are complete.
When the TV is HDMI (ARC) compatible
HDMI IN
(ARC)
Using this unit
When the TV is VIERA LinkTM “HDAVI ControlTM” or
HDMI CEC compatible
Turn on the active subwoofer.
Turn on the TV, and select this home theater system as the TV’s speakers from the
VIERA Link menu.
≥ If the TV is not a Panasonic TV, set the “Receiver” or “External speakers” to “On”.
Press [i VOL j] on the TV’s remote control to adjust the volume.
§ Operation with other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed.
≥ For details about VIERA Link (HDMI), refer to page 24 of the Owner’s Manual.
When the TV is non HDMI (ARC) compatible
OPTICAL
OUT
HDMI IN
When the TV is not VIERA LinkTM “HDAVI ControlTM”
or HDMI CEC compatible
Turn on the active subwoofer and the TV.
Press [TV] to select the TV sound.
Press [i VOL j] to adjust the volume.
≥ If there is sound from the TV’s speakers too, then use the TV’s remote control to lower the volume to
minimum.
For wall mounting and other de tails, be sure to ref e r to the Owner’s Manual.
Loading...