Operating Instructions
Инструкции по эксплуатации
Video Cassette Recorder
Model No.
NV-MV41 Series
Contents |
Page |
||||||
|
|
||||||
Warning and Important Information |
2 |
||||||
|
|
||||||
Controls and Components |
3 |
||||||
|
|
||||||
Connections |
4 |
||||||
|
|
||||||
Tuning the TV to Your VCR |
5 |
||||||
|
|
||||||
Storing TV Broadcasts in Your VCR |
5 |
||||||
|
|
||||||
Language Setting of the On Screen Display |
7 |
||||||
|
|
||||||
Setting the Clock of Your VCR |
7 |
||||||
|
|
||||||
Settings Using the On Screen Display |
7 |
||||||
|
|
||||||
Option Setting |
8 |
||||||
|
|
||||||
Playback |
9 |
||||||
|
|
||||||
Recording |
10 |
||||||
|
|
||||||
Timer Recording |
13 |
||||||
|
|
||||||
Search Functions |
15 |
||||||
|
|
||||||
Before Requesting Service |
17 |
||||||
|
|
||||||
Specifications |
19 |
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Before attempting to connect, operate or adjust this product, please read these instructions completely.
RQTV0014
Warning and Important Information
As this equipment gets hot during use, operate it in a well ventilated place;
Do not install this equipment in a confined space such as a book case or similar unit.
WARNING:
To reduce the risk of fire, electric shock or product damage, do not expose this equipment to rain, moisture, dripping or splashing and ensure that no objects filled with liquids, such as vases, shall be placed on the equipment.
Important
Your attention is drawn to the fact that the recording of pre-recorded tapes or discs or other published or broadcast material may infringe copyright laws.
For your safety
Do not remove outer cover.
Touching internal parts of the VCR is dangerous, and may seriously damage it.
To prevent electric shock, do not remove cover. There are no user serviceable parts inside. Refer all servicing to qualified service personnel.
Inserting Remote Control Batteries
Insert the batteries with the polarity (+ and -) correctly aligned.
Notes:
The service life of the batteries is approximately 1 year. However, it varies considerably depending on the frequency of use.
•When they are exhausted, replace them with two AA, UM3, or R6 size batteries.
•When the batteries are exhausted, remove them immediately and dispose them correctly.
•Do not mix old battery with new battery.
•Do not mix different battery types, i.e. Alkaline and Manganese.
•Do not use rechargeable (Ni-Cd) batteries.
•Do not heat or short-circuit the batteries.
•When you do not use the remote control for a long time, take out the batteries and store them in a cool, dry place.
Longrun Head System
This longrun head system enables approximately 8,000 hours of recording/playback in high quality images.
Newly developed head cylinder with narrower head windows and tapered cylinder design effectively protects heads from dust and prevents head clogging.
Plus, [Alumina] Head Cleaner further enhanced cleaning efficiency.
•Based on in-house tests with Panasonic video cassettes. Actual head life may vary according to conditions of use, tape type, temperature, humidity, etc.
Cautions before you operate this VCR
Avoid:
•Humidity and dust.
•Extreme heat such as direct sunlight.
•Magnets or electromagnetic objects.
•Touching internal parts of the VCR.
•Water or some other liquid.
•Lightning. (Disconnect the aerial plug from the VCR during lightning storms.)
•Anything heavy on the VCR.
•Connecting or handling the equipment with wet hands.
•Using a cell phone near the VCR because doing so may cause noise to adversely affect the picture and sound.
Do:
•Wipe the VCR with a clean and dry cloth.
•Install the VCR in a horizontal position.
•Keep the VCR, TV and other equipment switched off until you have finished all connections.
Condensation may form in the following cases:
•The VCR is brought from cold surroundings into a well-heated room.
•The VCR is suddenly brought from cool surroundings, such as an air-conditioned room or car, to a place which is hot and humid.
Note:
•In any of the above-mentioned conditions, do not operate the VCR for at least 1 hour. This VCR is not equipped with a dew sensor.
Press [VCR-ON/OFF] (1) to switch the VCR from ON to standby mode or vice versa. In the standby mode, the VCR is still connected to the mains.
Plug in Auto Tuning
(Setting image illustration)
|
|
|
(1) Connect the aerial cable |
|
|
|
(2) Connect the mains lead. |
|
|
|
(3) Press [VCR-ON/OFF] (1). |
(1) |
|
|
(4) Plug in Auto Tuning is completed. |
(2) |
IN PROGRESS, |
¢ On Screen Display |
|
|
|
AUTO TUNING |
(4) |
|
|
PLEASE WAIT. |
|
|
CH 22 |
SEARCH 21 |
All broadcasting stations that can be received in the |
|
|
END: MENU |
area are automatically tuned and stored in memory. |
|
|
|
|
|
|
¢ |
•Do not turn off the VCR halfway. (See page 5.) |
(3) |
|
|
|
|
|
|
2
ENGLISH
Controls and Components
|
|
|
|
|
(16) |
|
|
|
|
|
|
(17) |
|
|
VCR |
TV |
|
|
(18) |
|
(1) |
|
|
|
|
||
|
|
CH |
VOL |
(19) |
||
(2) |
|
AV |
||||
|
|
|
|
|||
(3) |
|
|
|
TRACKING/V-LOCK |
|
|
1 |
2 |
3 |
|
|
||
|
|
(20) |
||||
|
4 |
5 |
6 |
CH |
||
|
|
|
||||
|
7 |
8 |
9 |
|
(4) |
|
(4) |
|
0 |
-/-- |
|
(4) |
|
|
|
(21) |
||||
(5) |
CANCEL |
INPUT SEL |
AUDIO |
PROG PLAY |
||
(22) |
||||||
(6) |
|
TIMER |
|
|
(23) |
|
(7) |
PROG CHECK I-TIMER |
(24) |
||||
(8) |
MENU |
|
|
NAVI |
(25) |
|
(9) |
|
|
|
|
||
(10) |
|
|
|
|
(26) |
|
|
ENTER |
|
(27) |
|||
|
|
|
(28) |
|||
|
|
|
|
|
||
(11) |
JET REW |
|
|
PAUSE/SLOW |
(29) |
|
|
|
|
|
|||
(12) |
|
|
|
|
(30) |
|
(13) |
INDEX |
REPEAT RESET |
||||
(31) |
||||||
|
|
|
|
|||
|
|
|
|
|
|
STATUS/ |
|
(14) |
TIMER REC REC MODE NAVI CHECK |
(32) |
|
||
(15) |
|
(33) |
(1) |
(34) |
/ I |
TIMER REC |
REC/OTR |
|
|
|
|
|
|
|
|
|
|
CH |
|
(36)(37) |
(14)(38) |
(20)(39) |
(40) |
(42)(43)(44)
AC IN ~
VIDEO 2
AUDIO 2
IN (AV1) OUT
(46)(47)
VCR Operation
(1)[VCR-ON/OFF]
(2)[AV]
(3)[Numeric]
To select the programme positions (1-99).
• Example:
9:9
19: -/-- 1 9
(24)[I-TIMER]
(25)[NAVI]
(26)[ENTER]
(27)[Fast Forward]
(28)[4, 3, 2, 1] (Cursor buttons)
(29)[PAUSE/SLOW]
(30)[REPEAT]
(31)[RESET]
To enter numbers for various settings.
(4)No function
(5)[CANCEL]
(6)[INPUT SELECT]
(7)[PROG]
(8)[PLAY]
(9)[MENU]
(10)[Rewind]
(11)[JET REW]
(12)[STOP]
(13)[INDEX]
(14)[TIMER (REC)]
(15)[REC]
(16)Infra-red transmitter
(17)[TV-ON/OFF]
(18)[Channel]
(19)[VOLUME]
(20)[Channel]/[TRACKING/V-LOCK]
(21)[AUDIO]
This button does not operate on this VCR.
(22)[PROG PLAY]
(23)[CHECK]
To reset the tape counter (elapsed time) to [0:00.00].
•The tape counter is automatically reset to [0:00.00] when a video cassette is inserted.
(32)[STATUS/ NAVI CHECK]
(33)[REC MODE]
(34)Cassette compartment
(35)[EJECT]
(36)VIDEO IN socket (AV 2)
(37)AUDIO IN sockets (AV 2)
(38)[REC/OTR]
(39)Infra-red Remote Control Receiver window
(40)VCR display
(41)[TIMER CHECK]
(42)AC Input socket
(43)VIDEO IN socket (AV 1)
(44)VIDEO OUT socket
(45)RF IN socket
(46)AUDIO IN sockets (AV 1)
(47)AUDIO OUT sockets
(48)RF OUT socket
(35)
EJECT
STOP PLAY
TIMER
CHECK
PROG
PLAY
(41) (22) (10)(12)(8) (27)
(45)
2 IN
2OUT
RF
(48)
TV Operation using the remote control
You can use [TV-ON/OFF] (17)*1, [AV]
(2)*2, [VOLUME] (19)*3 and [Channel]
(18)*4 on the remote control for your TV operation.
(See page 4.)
*1 To switch the TV on from standby mode (OFF) or vice versa.
On some TVs it is only possible to switch the TV to standby mode (OFF) with this button, but not on. In this case, try to turn the TV on with one of the following buttons:
[AV] (2) [Channel] (18)
*2 To select desired AV input on the TV.
*3 To adjust the volume of the TV.
*4 To select the desired programme position (TV station) on the TV.
Note:
•You cannot operate TV channels with [Numeric] (3). When you want to change the channel, press [Channel] (18) on TV operation part.
3
Setting the Remote Control to Operate Your TV
You can operate the TVs of the manufacturers listed below with the remote control after setting it.
This setting procedure allows you to operate the TVs of some manufacturers using the supplied remote control.
Preparation
• Turn on the TV.
Operations
1Find the manufacturer number of your TV while referring to the following table.
2While holding down [TV-ON/OFF] (17) on the remote control, use [Numeric] (3) to enter the manufacturer number. This completes the settings for the TV manufacturer.
•Be sure to enter the number in two digits. Example: 1 ) 01
3To confirm the correct settings were made, check whether the TV can be operated properly.
•When a manufacturer has multiple numbers in the following table, try entering other numbers if the TV operations cannot be performed properly, and then select the optimal number.
Notes:
•If you are using a Panasonic TV, this setting has already been made, and so you do not need to perform the above setting procedure. However, this remote control may not work with some Panasonic TVs.
•Some TV models cannot be operated using this remote control (including all TVs non-remote compatible).
List of TVs Compatible with the VCR Remote Control
[Brand] |
[Code] |
|
|
Panasonic/National |
01-04 |
|
|
SONY |
05 |
|
|
TOSHIBA |
06 |
|
|
JVC |
07 |
|
|
HITACHI |
08 |
|
|
MITSUBISHI |
09, 10 |
|
|
SHARP |
11 |
|
|
PHILIPS, SAMSUNG |
12 |
|
|
NEC |
13 |
|
|
SANYO |
14 |
|
|
GOLDSTAR/LG |
15, 16 |
|
|
SAMSUNG |
17, 18 |
|
|
SANYO |
19 |
|
|
Connections
This section shows you how to connect the VCR to an aerial, TV, etc.
When the VCR is turned on after unpacking and connecting the aerial cable and the mains lead, Plug in Auto Tuning starts automatically.
Basic Connections
The following connections are required to record and play back the video cassette through the TV.
|
|
(1) |
|
(3) |
(2) |
|
|
(4) |
|
AC IN ~ |
2 IN |
|
|
|
(6) |
VIDEO2 |
|
AUDIO2 |
2OUT |
|
|
IN (AV1) OUT |
RF |
|
|
(5) |
|
¢ |
|
(1) Aerial (Not supplied) |
(6) AC Input socket (42) |
|
(2) TV Set (Not supplied) |
¢ To mains supply |
(3)Aerial Connector
(4)RF IN socket (45)
(5)RF OUT socket (48)
Connection to a TV using the Audio/Video Input Socket:
Set the RF output channel of the VCR to [ss] (RF OFF) when the VCR is connected to the TV via the Audio/Video cable. (See page 5.)
|
|
|
|
(1) |
|
|
(3) |
(2) |
|
|
|
(4) |
(5) |
|
|
|
|
(6) |
(7) |
|
|
|
|
|
|
AC IN ~ |
|
2 IN |
|
|
|
|
|
|
|
(10) |
VIDEO2 |
|
|
|
AUDIO2 |
2OUT |
|
|
|
|
IN (AV1) OUT |
RF |
|
|
|
(9) |
|
(8) |
|
|
|
|
|
|
¢ |
|
|
|
(1) |
Aerial (Not supplied) |
|
(8) RF OUT socket (48) |
|
(2) |
TV Set (Not supplied) |
(9) VIDEO OUT (44)/ |
|
|
(3) |
Aerial Connector |
|
AUDIO OUT (47) |
|
(4) |
VIDEO IN |
|
(10)AC Input socket (42) |
|
(5) |
AUDIO IN |
|
¢ To mains supply |
|
(6)Audio Cable/Video Cable (Not supplied)
(7)RF IN socket (45)
4
Tuning the TV to Your VCR
The VCR supplies a signal to the TV via the RF coaxial cable on channel E21-E69.
If you have connected the VCR to the TV through the Audio/ Video input sockets, then you do not need to follow the procedure below. To view the pictures from the VCR, set to the AV mode on the TV with [AV] (2).
Preparation
• Turn on the TV and the VCR.
Operations
1Set the TV to an unused position which you wish to use for your video playback.
•Tune the TV until the display shown below appears on the screen. (Please refer to the TV manufacturers operating instructions regarding tuning.)
•Set [RF SELECT] by pressing [2 1] (28) to select the colour TV system used by the TV set to be connected.
BG: PAL B.G.H/SECAM B.G
I:PAL I
DK: PAL D/SECAM D.K.K1
|
|
|
|
|
|
|
|
|
|
AUTO TUNING |
|
|
AUTO TUNING IS |
||||
|
IN PROGRESS, |
|
|
|||||
|
|
|
COMPLETED. |
|
||||
|
PLEASE WAIT. |
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RF SELECT BG |
I [DK] |
|||
|
|
|
|
|
|
|
|
|
CH 22 |
SEARCH |
21 |
|
|
|
|
|
|
|
END: MENU |
|
RF SELECT: |
|
|
|
END: MENU |
During Plug in Auto Tuning After Plug in Auto Tuning
2 Press [MENU] (9).
•If Auto Tuning stops halfway, refer to the right, “To Restart Plug in Auto Tuning”.
To Change the RF output Channel
You can change the RF output channel, for example, when interference occurs on the picture after tuning.
Operations
1Hold down [MENU] (9) for 5 seconds or more.
•The VCR display changes as shown below and the VCR picture on the TV displays this pattern.
Panasonic VCR
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RF SELECT |
BG I [DK] |
|||||
|
|
|
|
|
|
|
RF SELECT: |
|
|
|
END: MENU |
2Enter the desired channel number (E21-E69) by [Numeric] (3) or [Channel] (20).
•Set the RF output channel of the VCR to [ss] (RF OFF) when the VCR is connected to the TV via the Audio/Video cable. Press [Channel] (20) to display [ss].
21 69
ss
(RF OFF)
• It is also possible to select by pressing [Numeric] (3).
Example: 28: 2 8
3Press [MENU] (9) to finish the setting mode.
4Retune your TV to the new RF channel for the VCR.
Note:
•Even if the RF output channel has been changed, it is not necessary to perform Auto Tuning.
Storing TV Broadcasts in Your VCR
The VCR is fitted with its own tuner (just like a normal TV) and can be preset to receive up to 99 TV broadcast stations.
Plug in Auto Tuning
When the VCR is turned on after connecting the aerial cable and the mains lead, Auto Tuning starts.
AUTO TUNING
IN PROGRESS,
PLEASE WAIT.
CH 22 |
SEARCH |
21 |
|
|
END: MENU |
Auto tuning searches for TV stations from VHF minimum to UHF maximum and memorizes every tuned programme position.
To Cancel Auto Tuning Mid-Operation:
Press [MENU] (9) during Auto Tuning.
If Auto Tuning stops halfway, follow the next procedures to restart Plug in Auto Tuning.
To Restart Plug in Auto Tuning:
If Auto Tuning stops halfway by cancelling or playback;
1Press [EJECT] (35) and remove the video cassette.
2Keep both [Channel] (20) I and J on the VCR pressed simultaneously for 3 seconds or more during the VCR on.
•The channel displayed on the VCR display disappears for a moment then changes to 1.
3Disconnect the mains lead and then reconnect it.
4Turn off the VCR and then turn it on.
•Auto Tuning commences.
If Auto Tuning stops halfway by turning the VCR off or a power failure,
Or if the VCR is turned on without the aerial connected and all channels are skipped:
1Disconnect the mains lead and then reconnect it.
2Turn off the VCR and then turn it on.
• Auto Tuning commences.
5
Auto Tuning Using the On Screen Display
Introduction
The VCR is tuned automatically by Plug in Auto Tuning. However, Auto Tuning using the On Screen Display should be performed according to the following method if necessary.
Preparations
•Confirm that the TV is on and the VCR viewing channel is selected.
•Turn on the VCR and select any programme position except A1 or A2.
Operations
1Press [MENU] (9) to display the
Main menu on the TV screen.
2Press [43] (28) to select
[TUNER PRESET] then press [ENTER] (26).
MENU
LANGUAGE
CLOCK SET TUNER PRESET SYSTEM OPTION
TAPE REFRESH
NAVI MEMORY 0PROG.
SELECT : , ENTER END :MENU
MENU
LANGUAGE
CLOCK SET
TUNER PRESET SYSTEM OPTION
TAPE REFRESH
NAVI MEMORY 0PROG.
SELECT : , ENTER END :MENU
3 Press [43] (28) to select [AUTO TUNE] then press [2 1] (28) to start the Auto Tuning.
•When Auto Tuning is completed, the On Screen Display disappears and programme position 1 is selected.
TUNER PRESET
CH 1 |
[OFF] |
|||||
CLEAR |
||||||
AUDIO SYSTEM |
[DK] |
|||||
COLOUR SYSTEM |
[AUTO] |
|||||
AUTO TUNE |
[3] |
|||||
SEARCH |
||||||
FINE |
|
|||||
|
|
|
|
|
|
|
SELECT: |
|
|
|
|
|
END :MENU |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AUTO TUNING
IN PROGRESS,
PLEASE WAIT.
CH 1 SEARCH 100 END: MENU
|
|
|
The number |
|
|
|
|
|
displayed here is the number |
||
|
|
|
of channels still to be auto |
||
|
|
|
tuned. |
|
|
Channels that can be received |
|
|
|
||
|
|
|
|
|
|
|
SYSTEM |
VHF |
UHF |
|
CATV |
|
|
|
|
|
|
|
|
|
|
|
S01-S05 |
B |
CCIR Standard |
E2-E12 |
E21-E69 |
|
M1-M10 |
G |
(B.G.H) |
|
U1-U10 |
||
|
|
|
|||
|
|
|
|
|
S21-S41 |
|
|
|
|
|
|
|
Hong Kong |
|
|
|
|
|
Special |
|
|
|
|
I |
Administrative |
s |
E21-E69 |
|
s |
|
Region of China, |
|
|
|
|
|
UK (I) |
|
|
|
|
|
|
|
|
|
|
D |
East Europe |
R1-R12 |
E21-E69 |
|
44-470 MHz |
K |
(D.K.K1) |
|
|||
|
|
|
|
||
|
|
|
|
|
|
Notes:
•Auto Tuning searches for TV stations from VHF minimum to UHF maximum and memorizes every tuned programme position. Other programme positions are skipped.
•Auto Tuning takes 5 or more minutes to complete its search.
Manual Tuning Procedure
If the VCR is not correctly tuned by Auto Tuning, follow the procedure below.
1Press [MENU] (9) to display the Main menu on the TV screen.
2Press [43] (28) to select [TUNER PRESET] then press [ENTER] (26).
3Press [43] (28) to select [CH] then select the channel number you want to tune by pressing [2 1] (28).
4Confirm that [CLEAR] is set to [OFF].
5Press [43] (28) to select [AUDIO SYSTEM] then select the broadcasting system by pressing
[2 1] (28).
BG: PAL B.G.H/SECAM B.G
I:PAL I
DK: PAL D/SECAM D.K.K1
6Press [43] (28) to select [COLOUR SYSTEM] then select [AUTO] by pressing [2 1] (28).
•The VCR automatically distinguishes between PAL and SECAM broadcasts.
•If the picture lacks of colour when [AUTO] is selected, select [MESECAM] or [PAL].
7Press [43] (28) to select [SEARCH] then press [2 1] (28) to start the Manual Tuning.
•If the desired TV station has not been tuned, press [2 1] (28) again.
•Press [MENU] (9) and repeat steps 3-7 for each programme position you want to tune to a station.
|
CH 2 |
SEARCH 74 |
CH 2 |
SEARCH |
END: MENU |
|
END: MENU |
|
8Press [MENU] (9) three times to exit the On Screen
Display.
Direct Tuning
Follow steps 1 to 4 of Manual Tuning Procedure.
5Press [43] (28) to select [SEARCH].
6Press [Numeric] (3) to enter the number of the desired programme position.
•For other channels that require tuning, repeat steps 3, 4,
5, 6.
7Press [MENU] (9) twice to exit the On Screen Display.
Fine Tuning Procedure
Follow steps 1 to 4 of Manual Tuning Procedure.
5Press [43] (28) to select [FINE] then press [2 1] (28) to obtain the best tuning condition.
•Press [ENTER] (26) to return the tuning to its former state.
|
CH 2 |
|
|
|
AFC: ENTER |
6 Press [MENU] (9) to exit the On |
FINE |
|
: |
|
END: MENU |
|
|||||
|
|
|
|
|
|
Screen Display. |
|
|
|
|
|
Blanking of Unused Programme Positions
Follow steps 1 to 3 of Manual Tuning Procedure.
4Press [43] (28) to select [CLEAR] then press [2 1] (28) to select [ON].
•Repeat steps 3, 4 for other unused programme positions to skip during the selection of programme positions.
•To cancel the blanking of a programme position, select that programme position then set [CLEAR] to [OFF].
5Press [MENU] (9) twice to exit the On Screen Display.
6