Omron 6CYSIDV6800306 Manual

RFID System

V680 Series

User's Manual

Amplifier and Antennas

V680-HA63B

V680-HS52

V680-HS63

ID Tags

V680-D2KF52

V680-D2KF67

V680-D2KF67M

Cat. No.: Z248-E1-01

Introduction

Thank you for purchasing a V680-series RFID System. This manual describes the functions, performance, and application methods needed for optimum use of the V680-series RFID System.

Please observe the following items when using the RFID System.

•Allow the RFID System to be installed and operated only by qualified specialist with a sufficient knowledge of electrical systems.

•Read and understand this manual before attempting to use the RFID System and use the RFID System correctly.

•Keep this manual in a safe and accessible location so that it is available for reference when required.

Introduction READ AND UNDERSTAND THIS DOCUMENT

Section 1 Product Overview

Section 2 Specifications and Performance

Section 3 Communications Specifications

Section 4 Installation

Section 5 Chemical Resistance

RFID System

V680-HA63B	Amplifier
V680-HS52	Antenna
V680-HS63	Antenna
V680-D2KF52	ID Tag
V680-D2KF67	ID Tag
V680-D2KF67M	ID Tag

5 Section 4 Section 3 Section 2 Section 1 Section Introduction

User's Manual

Introduction

Introduction

READ AND UNDERSTAND THIS DOCUMENT

Please read and understand this document before using the products. Please consult your OMRON representative if you have any questions or comments.

WARRANTY

OMRON’s exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON.

OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.

LIMITATIONS OF LIABILITY

OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY.

In no event shall responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.

IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON’S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.

SUITABILITY FOR USE

THE PRODUCTS CONTAINED IN THIS DOCUMENT ARE NOT SAFETY RATED. THEY ARE NOT DESIGNED OR RATED FOR ENSURING SAFETY OF PERSONS, AND SHOULD NOT BE RELIED UPON AS A SAFETY COMPONENT OR PROTECTIVE DEVICE FOR SUCH PURPOSES. Please refer to separate catalogs for OMRON's safety rated products.

OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer’s application or use of the product.

At the customer’s request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other application or use.

The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:

•Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document.

•Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations.

•Systems, machines, and equipment that could present a risk to life or property.

Please know and observe all prohibitions of use applicable to the products.

NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

PERFORMANCE DATA

Performance data given in this document is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability.

CHANGE IN SPECIFICATIONS

Product specifications and accessories may be changed at any time based on improvements and other reasons.

It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the product may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual specifications of purchased products.

DIMENSIONS AND WEIGHTS

Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.

ERRORS AND OMISSIONS

The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical, or proofreading errors, or omissions.

PROGRAMMABLE PRODUCTS

OMRON shall not be responsible for the user’s programming of a programmable product, or any consequence thereof.

COPYRIGHT AND COPY PERMISSION

This document shall not be copied for sales or promotions without permission. This document is protected by copyright and is intended solely for use in conjunction with the product. Please notify us before copying or reproducing this document in any manner, for any other purpose. If copying or transmitting this document to another, please copy or transmit it in its entirety.

2		RFID System
		User's Manual

Introduction

Safety Precautions

Alert Symbols for Safe Use

The following symbols are used in this manual to indicate precautions that must be observed to ensure safe use of the V680-HS63, V680-HS52, and V680-HA63B. The precautions provided here contain important safety information. Be sure to observe these precautions.

The following signal words are used in this manual.

Indicates a potentially hazardous situation which, if not avoided, will result in minor or mod-

WARNING erate injury, or may result in serious injury or death. Additionally, there may be significant property damage.

Meanings of Alert Symbols

Indicates general prohibitions for which there is no specific symbol.

Warning

WARNING

These Products are not designed to be used either directly or indirectly in applications that detect human presence for the purpose of maintaining safety. Do not use these Products as a sensing means for protecting human lives.

Regulations and Standards

The V680-HS63, V680-HS52, and V680-HA63 conform to the following overseas regulations and standards.

1.FCC Rules (Federal Communications Commission)

This product complies with Part 15 Subpart C of the FCC Rules. FCC ID: E4E6CYSIDV6800306

FCC NOTICE

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference.

(2)This device must accept any interference received, including interference that may cause undesired operation.

FCC WARNING

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Properly shielded ground cables and connectors must be used for connection to host computer and/or peripherals in order to meet FCC emission limits.

Ferrite cores (TDK Type ZCAT1730-0730A or its equivalent) must be attached to the cables connecting the power supply and ground to suppress RF interference.

Introduction

RFID System	3
User's Manual

Introduction

Introduction	2. EC Declaration of Conformity
	Hereby, OMRON Corporation declares that this RFID System, Antenna V680-HS52, V680-HS63, and Amplifier V680-
	HA63B.Amplifier and Antenna are in compliance with essential requirements and other relevant provisions of Directive
	1995/5/EC, and satisfy tests for the appropriate requirements of the following relevant standards.
	Radio:	EN 300 330-2V1.1.1 (06-2001)
		EN 300 330-1V1.3.1 (06-2001)
	EMC:	EN 301 489-3V1.4.1 (08-2002)
		EN 301 489-1V1.4.1 (08-2002)

Safety: EN 61010-1: 2001 (2nd Edition)

Countries of intended use:

Austria, Belgium, Denmark, Estonia, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Liechtenstein, Luxembourg, Netherlands, Norway, Portugal, Romania, Spain, Sweden, Switzerland, United Kingdom

English	Hereby, Omron, declares that the RFID System, V680-HS52 Series, V680-HS63 Series, and V680-HA63B Series are in compliance with the essential
	requirements and other relevant provisions of Directive 1999/5/EC.
Finnish	Omron vakuuttaa täten että RFID Säännös, V680-HS52 Series, V680-HS63 Series, V680-HA63B Series tyyppinen laite on direktiivin 1999/5/EY oleellis-
	ten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.
Dutch	Hierbij verklaart Omron dat het toestel de RFID Systeem, V680-HS52 ´Serie, V680-HS63 ´Serie, V680-HA63B ´Serie in overeenstemming is met de
	essentiële eisen en de andere relevante bepalingen van richtlijh 1999/5/EG.
French	Par la présente Omron déclare que la RFID Système, V680-HS52 Série, V680-HS63 Série, V680-HA63B Série sont conforme aux exigences essentielles
	et aux autres dispositions pertinentes de la directive 1999/5/CE.
Swedish	Härmed intygar Omron att den RFID System, V680-HS52 Serie, V680-HS63 Serie, V680-HA63B Serie stär l överensstämmelse med de väsentliga egen-
	skapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.
Danish	Undertegnede Omron erklærer herved, at følgende den RFID System, V680-HS52 Serie, V680-HS63 Serie, 680-HA63B Serie overholder de væsentlige
	krav og øvrige relevante krav i direktiv 1999/5/EF.
German	Hiermit erklärt Omron, die RFID System, V670-H11 Serie, V680-HS63 Serie, V680-HA63B Serie in Übereinstimmung mit den grundlegenden
	Anforderungen und den anderen relevanten Vorschriften der Richtlinie 1999/5/EG befindet. (BMWi)
Greek	ME THN ΠAPOYSA Omron ∆HΛONEI RFID O’YO’ΓΗΜΑ, V680-HS52 O’EIPA, V680-HS63 O’EIPA, V680-HA63B O’EIPA SYMMOPF ONETAI
	ΠPOS TIS OYSIO∆EIS AΠAITHSEIS KAI TIS ΛOIΠES SXETIKES ∆IATAΞEIS THS O∆HΓIAS 1999/5/EK.
Italian	Con la presente Omron dichiara che la RFID Sistema, V680-HS52Serie, V680-HS63 Serie, V680-HA63B Serie sono conforme ai requisiti essenziali ed
	alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Spanish	Por medio de la presente Omron declara que el RFID Sistema, V680-HS52 Serie, V680-HS63 Serie, V680-HA63B Serie esta conforme a los requisitos
	esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
Portuguese	Omron declara que a RFID Sistema, V680-HS52 Série, V680-HS63 Série, V680-HA63B Série ser conforme com os tequisitos essenciais e outras dis-
	posições da Directiva 1999/5/CE.
Romanian	Prin prezenta, Omron declar c acest V680-HS52,V680-HS63, V680-HA63 este conform cu cerin ele principale çi cu celelalte prevederi relevanate ale
	Directivei 1999/5/EC.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Properly shielded ground cables and connectors must be used for connection to host computer and/or peripherals in order to meet FCC emission limits.

Ferrite cores (TDK Type ZCAT1730-0730A or its equivalent) must be attached to the cables connecting the power supply and ground to suppress RF interference.

3.Japan Radio Law

Equipment using high frequencies: Inductive Reading/Writing Communications Equipment

Conforming standards: Inductive Reading/Writing Communications Equipment; Standard: ARIB STD-T82

4		RFID System
		User's Manual

Introduction

Precautions for Safe Use

Be sure to observe the following precautions to ensure safe use of the Products.

1.Do not use the Products in environments with flammable, explosive, or corrosive gasses.

2.Do not attempt to disassemble, repair, or modify any Product.

3.Tighten mounting screws securely.

4.If any cable has a locking mechanism, make sure that it has been locked before using the cable.

5.Do not allow water or pieces of wire to enter from openings in the case. Doing so may cause fire or electric shock.

6.Turn OFF the Controller power supply before mounting or removing an Antenna or Amplifier.

7.If an error is detected in any Product, immediately stop operation and turn OFF the power supply. Consult with an OMRON representative.

8.Dispose of the Products as industrial waste.

9.Observe all warnings and precautions given in the body of this manual.

10.Make sure that there is no adverse effect of radio waves on medical equipment.

The Japan Automatic Identification Systems Association (JAISA) guidelines are as follows:

These Antennas for RFID devices use radio waves. They may adversely affect medical equipment, depending on where and in what applications they are used. To minimize the effects of radio waves, observe the following countermeasure for people with implanted cardiac pacemakers or other medical devices when using RFID devices:

Do not bring the Antenna for RFID devices any closer than 22 cm to the implanted location of the cardiac pacemaker.

Introduction

RFID System	5
User's Manual

Introduction

Introduction

Precautions for Correct Use

Always observe the following precautions to prevent operation failures, malfunctions, and adverse effects on performance and equipment.

1. Installation Environment

Do not use the Products in the following locations.

•Locations exposed to corrosive gases, dust, metallic powder, or salts

•Locations not within the specified operating temperature range

•Locations subject to rapid changes in temperature or condensation

•Locations not within the specified humidity range

•Locations subject to direct vibration or shock outside the specified ranges

•Locations subject to spray of water, oil, or chemicals

2.Installation

The Products communicate with Tags using the 13.56-MHz frequency band. Some motors, inverters, and switching power supplies generate noise that can affect communications with the Tags and cause errors. If such devices are located near the Tags, always test operation in advance to confirm whether the system will be affected.

•Observe the following precautions to minimize the effects of normal noise.

(1)Ground all metal objects in the vicinity of the Products to 100 Ω or less.

(2)Do not use the Products near high-voltage or high-current lines.

•Do not use non-waterproof Products in an environment where mist is present.

•Do not expose the Products to chemicals that adversely affect the Product materials.

•When mounting the Products, tighten the screws to the following torques. V680-HS63: 1.2 N m

V680-HS52: 40 N m

•If multiple Antennas are mounted near each other, communications performance may decrease due to mutual interference. Refer to Installing Antennas on page 32 and check to make sure there is no mutual interference.

•Depending on the operating environment, the case surface may become fogged, but basic performance will not be affected.

3.Storage

Do not store the Products in the following locations.

•Locations exposed to corrosive gases, dust, metallic powder, or salts

•Locations not within the specified storage temperature range

•Locations subject to rapid changes in temperature or condensation

•Locations not within the specified storage humidity range

•Locations subject to direct vibration or shock outside the specified ranges

•Locations subject to spray of water, oil, or chemicals

4.Cleaning

•Do not clean the Products with paint thinner or the equivalent. Paint thinner or the equivalent will dissolve the resin materials and case coating.

6		RFID System
		User's Manual

Introduction

Meanings of Symbols

Indicates particularly important points related to a function, including precautions and application advice.

Indicates page numbers containing relevant information.

Symbols of Meanings Introduction

RFID System	7
User's Manual

Symbols of Meanings Introduction

Introduction

MEMO

8		RFID System
		User's Manual

		Introduction
Table of Contents
	Safety Precautions	3
	Regulations and Standards	3
	Precautions for Safe Use	5
	Precautions for Correct Use	6
	Meanings of Symbols	7
	Table of Contents	9
Section 1 Product Overview		11
	Features	12
	Product Configuration	13
Section 2 Specifications and Performance		15
	Antennas with Separate Amplifier	16
	Amplifier	20
	Tags	23
Section 3 Communications Specifications		27
	Communications Distances	28
Section 4 Installation		31
	Installing Antennas	32
	Mounting Amplifiers	33
	Installing Tags	37
Section 5 Chemical Resistance		39
	Chemical Resistance of the Antennas	40
Revision History		42

Introduction

RFID System	9
User's Manual

Introduction

Introduction

10		RFID System
		User's Manual

Section 1

Product Overview

		Features	12
		Product Configuration	13

Overview Product 1 Section

RFID System	11
User's Manual

Features 1 Section

Section 1

Product Overview

Features

The V680-series RFID System actively supports many different types of system, such as distributed-control systems and many-product, small-lot production systems, with non-contact data communications using electromagnetic induction.

Non-contact Data Communications

The V680 Series uses electromagnetic induction to enable non-contact, bi-directional data communications between Antennas and Tags.

CRC Used for Transmission Error Detection

A bi-directional 16-bit CRC (Cyclic Redundancy Check) has been added as the error detection method for wire transmissions between ID Controllers and Antennas, and for wireless transmissions between Antennas and Tags. This method maintains superior communications reliability even where problems such as noise occur.

Superior Environmental Resistance and High Reliability

Antennas and Tags now have greater environmental resistance and are not affected by vibration, oil, or water.

12		RFID System
		User’s Manual