OLYMPUS C-40 Zoom TECHNICAL INFORMATION TID C40Z E002

TECHNICAL INFORMATION

NO. TID-C40Z-E002

DATE January .11.2002

Revised by OE/CPI-TSD

SUBJECT: Release a reset (erase) program for the registered picture

displayed on the monitor when power is turned ON/OFF

Product Name: C-40Zoom

Reason: The register picture can not be reset (erased), if a picture has been registered once.

Note: It is only possible to register a new picture.

The reset program: DSCCAL version 128b Beta

Installation of calibration software:

1. Put calibration software into FD drive.

2. Open Explorer.

3. Copy folder “DSCCalDI 128 beta” of FD drive to any folder on HD.

Installation of a USB driver:

The USB driver attached to the camera or the personal computer connection kit is installed.

Adjustment Method :

1. Turn ON the power of the camera.

2. Double-click "DscCalDi.exe".

3. Choose "Set Default" at the bottom in the combo box of LCD "Test."

4. Close "DscCalDi" window.

5. Turn OFF the power of the camera.

Note ! : Use the software only for reset (erase) of the registered picture.

OLYMPUS OPTICAL CO.,LTD TOKYO