OLYMPUS C-3040 Zoom TECHNICAL INFORMATION TID C3040Z E003

TECHNICAL INFORMATION

NO. TID-C3040Z-003

DATE Nov.21.2001

SUBJECT: Version up of Firmware

Product name: C-3040ZOOM

The latest firmware:

OLD VERSION NEW VERSION

NTSC(GUI:JAPANESE) V354-76 V354-77

NTSC(GUI:ENGLISH) V354u-76 V354u-77

PAL V354p-75 V354p-76

Please refer to repair article for a procedure of rewriting firmware.

Change contents (Reason):
It changed in order to carry out “SDK” for dentistry photography.
The command that can set up a “custom clear setting” from PC was added.
This is not related to ordinary users.

Change classification: Running change

Version up procedure:

1. The binary data of the latest firmware is changed with “firmware.bin” and into smart media.
But format smart media into C-3040Zoom and make directory “firmware” copy from binary data.
(Make F/W card)

2. Insert the F/W card for C-3040Zoom and turn on the camera at play mode.

3. TFT-LCD was showed F/W version and inquire of rewriting of F/W.
Then select “YES” (Character is changed green) and after pressing “OK”, rewriting of F/W is started
automatically.

4. During the rewriting of F/W, SELF-RED is turned on and showed “EXCHANING” on TFT-LCD.
It will take about 2 minutes but please do not operate any key and turn off power.
It might have damaged camera body and F/W.

5. After the rewriting of F/W, TFT-LCD was showed as same as procedure 3.
Then confirm new version of F/W (example: V354-76=NTSC(GUI:JAPANESE)) and turn off power after
selecting “NO”.
(The discrimination of countermeasure is not showed due to confirm easily.)

OLYMPUS OPTICAL CO. ,LTD TOKYO