OLYMPUS C-220 Zoom Notice of Modification V1R6
C-2Z / C-220Z / D-520Z/ D-520ZS
E. NOTICE OF MODIFICATION
1. Change of K-FPCA CORE .........................................................................E-2
2. Version-up of Firmware .............................................................................E-3
3. Version-up of Firmware (2) ........................................................................E-4
4. New Adjustment Software .........................................................................E-5
5. Change of the circuit boards (MC, CJ) ......................................................E-6
6. Countermeasure of the scratches on Cabinet Front
(Change of Barrier Tape) ................................E-7
7. For the maintenance by the D-520ZS addition...........................................E-8
8. For the maintenance VE384900 (CABINET BACK#)-type2.......................E-9
9. Addition of repair parts (VE410000_083SHIELD SHEET) .......................E-10
10. Countermeasure of the static electricity
(Engineering change of MC2-PCA and add repair parts)............................E-11
Rev.6
SERVER_DIS E-1 Ver.1
E. NOTICE OF MODIFICATION C-2Z / C-220Z / D-520Z / D-520ZS
SUBJECT Change of K-FPCA CORE 2002.Apr.25
DESCRIPTION : Change of K-FPCA CORE
OLD NEW
VE410100 VE410400
REASON :
Improvement in the productivity
REMARKS :
Productivity is improved by the reason that the size of the new part is smaller than old one
and the place of the installation is changed.
Fix a new part by the tape when you use a new part.
* The kind of the tape for the fixation isn't specially specified.
OLD NEW
Place of the installation : In-side of CJ-PCA Out-side of CJ-PCA
Size : Big Small
Tape: Unnecessary Necessary
SERVER_DIS E-2 Ver.1
Rev.1
C-2Z / C-220Z / D-520Z / D-520ZS E. NOTICE OF MODIFICATION
SUBJECT Version-up of Firmware 2002.Apr.25
DESCRIPTION : Change of Firmware
OLD NEW
USER: Ver1.051 Ver1.052
BOOT: Ver1.004 Ver1.004
REASON :
1. White balance detection of 1
2. Added the entry of focus result in the Exif Marker-Note Tag.
REMARKS :
<Update procedure>
Please refer to D-2 of Service manual
<Change classification>
Running change
st
shot is used as white balance after the second shot.
Rev.3
Ver.1 E-3 SERVER_DIS
E. NOTICE OF MODIFICATION C-2Z / C-220Z / D-520Z / D-520ZS
SUBJECT Version-up of Firmware (2) 2002.Apr.25
DESCRIPTION : Change of Firmware
OLD NEW
USER: Ver1.052 Ver1.054
BOOT: Ver1.004 Ver1.005
REASON :
<USER>
1. It is changed to do the next “Read” after BusyReady interruption was detected because
there were conditions that “Read” was started during Busy at the time of “SmartMedia
Read”.
2. The memory location of the Zoom positional information was changed on the CISC RAM
from FlashMemory.
3. Countermeasure of Media 512byte FFh problem.
<BOOT>
1. It is changed to do the next “Read” after BusyReady interruption was detected because
there were conditions that “Read” was started during Busy at the time of “SmartMedia
Read”.
REMARKS :
<Update procedure>
Please refer to D-2 of Service manual
<Change classification>
Running change
SERVER_DIS E-4 Ver.1
Rev.1
Loading...