Olivetti ECR 2400, ECR 2400 euro Instructions Manual

Cash RegisterCash Register

Cash Register

INSTRUCTIONSINSTRUCTIONS

INSTRUCTIONS

INSTRUCTIONS D'EMPLOIINSTRUCTIONS D'EMPLOI

INSTRUCTIONS D'EMPLOI

BEDIENUNGSANLEITUNGBEDIENUNGSANLEITUNG

BEDIENUNGSANLEITUNG

INSTRUCCIONES DE USOINSTRUCCIONES DE USO

INSTRUCCIONES DE USO

ECR 2400ECR 2400

ECR 2400 euro

P/N 533166 N

Olivetti Lexikon, S.p.A. Documentazione 77, Via Jervis - 10015 Ivrea (Italy)

ENGLISH

Your attention is drawn to the following actions that could compromise the characteristics of the product:

• incorrect electrical supply;

• incorrect installation; incorrect or improper use, or, in any case, not in accordance with the warnings given in the User Manual supplied with the product;

• replacement of original components or accessories with others of a type not approved by the manuf acturer, or carried out by unauthorized personnel.

The mark affixed to the product certifies that the product satisfies the basic quality requirements.

WARNING: THIS EQUIPMENT MUST BE EARTHED . ATTENTION: CETTE UNITE DOIT ETRE CONNECTEE A LA TERRE. ACHTUNG: DIESES GERÄT MUSS EINEN ERDUNGSANSCHLUSS HABEN. ATENCION: ESTE EQUIPO DEBE ESTAR CONECTADO A UNA T OMA DI TIERRA. APP ARATET MÅ KUN TILKOPLES JORDET STIKK ONTACT . APP ARA TEN SKALL ANSLUTAS TILL JORD A T NÄTUKKAT . LAITE ON LITTETTÄVÄ SUKO-RASIAAN. Lederen med grøn/gul isolation ma kun tilsluttes en klemme maerkrt eller

.

To disconnect the cash register from the line voltage, unplug its power cord from the power outlet. The power outlet must be located on a wall, near the cash register and easily accessible.

I

ENGLISH

PrPr

Pr

efef

ef

aceace

ace

The electronic cash register described in this manual is designed to help your business function smoothly by providing efficient register operations and accurate management reports. Startup is quick and easy, yet there are many options that can be added and revised so that you can customize your operations for optimum productivity. Here are just a few of the cash register’s many valuable features:

• 40 departments and 500 Price Look-Up (PLU) settings;

• 15 clerk numbers to monitor the sales of individual employees;

• possibility of assigning a three-digit security code to prevent

unauthorized access to individual clerk transactions (during register mode only);

• possibility of defining manager passwords to prevent unauthorized

access to the machine's programming mode (PRG), Z mode and X mode;

• possibility of assigning a name to each clerk for rapid identification;

• dot-matrix printer with journal record and receipt printing

capabilities;

• customer sales receipt header personalization;

• personalization of currency convert captions and credit captions on

the sales receipts and reports

• possibility of reserving two departments for registering credit sales paid with two different types of credit cards;

• Euro exchange rate programming;

• possibility of programming the machine to work with one of two base currencies, Local or Euro, so that cash register computes in the currency set and automatically converts the related transaction totals into the other currency;

• rear customer display for transaction viewing;

• front operator display consisting of a 10-character message line on top and a 10-character transaction line on the bottom;

• automatic tax computations for 4 different VAT rates;

• department-linked entry options that streamline and speed-up operation;

• periodic management and financial reports which provide up-to-date sales analysis;

• battery back-up protection for the records and programming data stored in memory;

• automatic time display after a period of system inactivity;

• automatic time and date printing on receipt and journal records;

• programmable customer receipt and journal record printing in any one of four languages (English, French, German and Spanish).

II

T able of Contents

GETTING ACQUAINTED WITH

YOUR CASH REGISTER .............................................. 1

Standard Accessories..................................................... 2

Using this Manual........................................................... 2

Unpacking and Setting Up the Cash Register ................ 3

Maintaining the Cash Register ....................................... 3

THE KEYPAD ................................................................ 4

Keypad Functions........................................................... 5

THE CONTROL SYSTEM ............................................. 6

The Control Lock............................................................ 6

Cash Drawer with Removable Cash Bin ........................ 7

Deposit Drawer............................................................... 7

Operator and Customer Displays ................................... 7

Automatic Time Display ................................................. 7

Date Display................................................................... 7

Special Symbol Indicators.............................................. 7

Positioning the Customer Display .................................. 8

ERROR CONDITIONS .................................................. 8

The Error Alarm ............................................................. 8

Clearing an Error............................................................ 8

General Clearance ......................................................... 8

Voiding Errors................................................................. 9

BACK-UP BATTERY SYSTEM ..................................... 9

Inserting/Replacing Batteries ......................................... 9

PRINTER COMPARTMENT ........................................ 10

Ribbon Cartridge .......................................................... 10

Installing the Ribbon Cartridge...................................... 11

Paper Tape ................................................................... 12

Loading Single-Ply and Dual-Ply Paper ....................... 12

QUICK START............................................................. 13

Helpful Hints for a Successfull Start-Up....................... 14

TRAINING MODE ........................................................ 14

Activating the Training Mode ....................................... 15

Exiting the Training Mode ............................................ 15

CASH REGISTER PROGRAMMING .......................... 15

Setting Cash Register Features ................................... 16

Making Changes to Cash Register Programming ........ 16

Entering the Program Mode ......................................... 16

Exiting the Program Mode ........................................... 16

Clearing Errors ............................................................. 16

Clerk Numbers, Secret Codes and Names .................. 17

Machine Numbers ........................................................ 18

Date and Time.............................................................. 18

Receipt Header ............................................................ 19

Percent Discount (-%) .................................................. 20

Percent Plus Rate (+%)................................................ 20

Fraction Rounding........................................................ 21

III

ENGLISH

Decimal Point Position ................................................. 21

Value Added Tax (VAT) Rates ...................................... 22

High Digit Lock Out (HDLO) and Tax Status

Assigned to the Minus Key (-) ...................................... 22

Tax Status, High Digit Lock Out, Single/Multiple

Item Sale and Price Linked to a Department ............... 23

Price Look-Ups (PLUs)................................................. 24

Euro Exchange Rate and Receipt Caption

Programming ............................................................... 24

Credit 1, Credit 2 Captions Programming .................... 26

Programming System Options ..................................... 26

PLU Programming Dump Report ................................. 28

Overall Programming Dump Report ............................ 29

Programming Manager Passwords .............................. 30

Using the Cash Register in a Password

Protected Mode............................................................ 31

TRANSACTION EXAMPLES ...................................... 31

Entering the Register Mode.......................................... 31

Exiting the Register Mode ............................................ 32

Clearing Errors ............................................................. 32

Sample Receipt............................................................ 32

Standard Transactions in Local Base Currency ........... 32

Examples of Transactions in Euro Base Currency....... 39

Minus (-) Key Transactions........................................... 43

Percent Discount (-%) Transactions............................. 45

Percent Plus (+%) Transactions................................... 48

PLU Codes ................................................................... 52

Voids and Refunds ....................................................... 53

Other Transactions....................................................... 56

MANAGEMENT REPORTS ......................................... 60

X and Z Reports ........................................................... 60

Cash-In-Drawer Report ................................................ 60

Time Report ................................................................. 61

Clerk Report ................................................................. 61

All PLU Report ............................................................. 62

PLU Range Report ....................................................... 62

Department Range Report ........................................... 63

Z1 and X1 Financial Report ......................................... 63

Z2 and X2 Financial Report ......................................... 64

Duplicate Z Report ....................................................... 65

Balancing Formulas ..................................................... 65

APPENDIX ................................................................... 66

Character Code Table .................................................. 66

Caption Table ............................................................... 67

Totalizers and Counters Table...................................... 70

Cash Register Specifications and Safety ..................... 71

1

ENGLISH

Getting Getting

Getting

Acquainted with Acquainted with

Acquainted with

YY

Y

our Cash Regour Cash Reg

our Cash Reg

isterister

ister

The figure below shows an overall view of your cash register.

1. Customer Display 7. Control Lock

2. Operator Display 8. Printer Compartment Lock

3. Keypad 9. Customer Receipt Output Window

4. Item Deposit Drawer 10. Printer Compartment Cover

5. Cash Drawer

6. Cash Drawer Lock

2

3

4

5

6

8

10

1

7

9

2

ENGLISH

Using this ManualUsing this Manual

Using this Manual

Your cash register manual is organized for easy reference. The front portion contains general information on all the features and functions of the cash register. Instructions for setting the optional programs come next. Transaction examples for operating the cash register are at the back of the manual with a Character Code Table to use to program character strings as an alternative to using the alphanumeric keypad, a Caption Table indicating the cash register's preprogrammed character strings in the four languages available, and a Totalizers and Counters Table. At the back of the manual you will also find your cash register's techinical specifications and some safety information. Use the Table of Contents to locate a particular item.

Getting StarGetting Star

Getting Star

tedted

ted

Before you begin to operate or program the cash register, read the section entitled Unpacking and Setting Up the Cash Register for information on how to get yourself ready to work. Read also Keypad Functions, The Control System and Operator and Customer Displays to become familiar with their operations.

NOTE: Programs and transaction information for management reports

are stored in the memory of the cash register. Batteries are provided to save this information in the event of a power failure or if the cash register is unplugged from the power outlet.

PrPr

Pr

ogramming the Cash Regogramming the Cash Reg

ogramming the Cash Reg

isterister

ister

Simple step-by-step instructions are included for each program. Also provided are examples which can be used for practice.

CarrCarr

Carr

ying Out Sales ying Out Sales

ying Out Sales

TT

T

ransactionsransactions

ransactions

Transaction examples provide steps for key operations. Sample receipts are included.

StandarStandar

Standar

d d

d

AccessorAccessor

Accessor

iesies

ies

Your cash register comes with the following items:

• One black plastic journal winder spindle

• One roll of standard paper tape

• One inked ribbon cartridge

• Four standard "AA" batteries for the battery back-up system

• This User Manual

• A set of keys for locking the cash drawer and printer compartment

• A key for access to the PRG, REG 1, REG 2, X and Z functions. Make sure that the cash register and all of the above items are

included in the shipping carton.

3

ENGLISH

UnpacUnpac

Unpac

king and Setting Up the Cash Regking and Setting Up the Cash Reg

king and Setting Up the Cash Reg

isterister

ister

NOTE: Please read this section carefully before attempting to program

the cash register or perform sales transactions.

As soon as you receive the cash register, open its shipping carton and

carefully withdraw each component. Make sure that the cash register and all of its accessories, listed in the section entitled Standard Accessories, are present in order to setup the cash register by following these guidelines:

1. Place the cash register on a level, stable, vibration-free and dust-

free surface. Make sure it is near a grounded power outlet.

2. Remove the adhesive tape from the compartment cover.

3. Insert the batteries as explained in the section entitled Inserting/

Replacing Batteries.

4. Install the inked ribbon cartridge as explained in the section entitled

Installing the Ribbon Cartridge.

5. Plug the cash register into a grounded power outlet.

6. Load the paper tape as explained in the section entitled Loading

Single-Ply and Dual-Ply Paper.

7. Set the desired program options as explained in the section Cash

Register Programming.

8. Once the desired program options have been set, turn the control

key to the REG 1 or REG 2 position and you are ready to perform sales transactions. In the REG 2 position the cash register will not print the programmed receipt header.

Maintaining the Cash RegMaintaining the Cash Reg

Maintaining the Cash Reg

isterister

ister

Provided below is information on how to maintain your cash register.

NOTE: Before cleaning the cash register, make sure it is powered off

and/or unplugged from the wall outlet. Before unplugging the cash register from the wall outlet, make sure that four charged AA standard backup batteries are installed in the battery compartment. All data stored in memory will be cancelled if

you unplug the cash register from the electrical wall outlet without back-up battery supply.

1. Keep all liquids away from the cash register so as to avoid spills which could damage the electronic components.

2. To clean the cash register firstly turn it off and/or unplug it from the wall outlet (be sure the back-up batteries are installed), then use just a damp cloth. Do not use corrosive substances such as solvents, alcohol, petrol, or abrasive components.

3. If the cash register is stored in extreme hot or cold temperatures (below 32 degrees or above 104 degrees Fahrenheit), allow the temperature inside the cash register to reach room temperature before turning it on.

4. DO NOT attempt to pull the paper tape when the cash register is printing or when you are loading paper. Always use the [Feed] key to feed paper. Pulling the paper tape could damage the print mechanism.

4

ENGLISH

The KThe K

The K

ee

e

ypadypad

ypad

Your cash register is equipped with a 52-key keypad by means of

which you can perform all cash register functions.

The figure below shows the keypad layout.

17

1816

12 11

6

5

15

13

20

23

4 21

19

22

9

8

1

10

2 7

3

14

5

ENGLISH

KK

K

ee

e

ypad Functionsypad Functions

ypad Functions

1. [Feed] (Paper Feed) - Advances the receipt or journal paper one

line feed; advances the paper continuously when held down.

2. [Clerk] - Confirms an entered clerk number and three-digit

security code. Also used to print a Clerk Report.

3. [Qty/Date] (Dual function: Multiply and time display) - Multiplies [DEPARTMENT], [PLU] or [-] key entries; also displays the current time, if set, and is used to print the Cash-In-Drawer Report.

4. [#/ST/NS] (Dual function: ST - Subtotal and NS - No Sale) - As the No Sale key, opens the cash drawer without registering any amount or when changing cash for a non-sales transaction. As the Subtotal key, calculates a subtotal during a transaction consisting of a number of items to be individually discounted or increased by a fixed percentage and prints this on the receipt.

5. [PLU ALT] - Temporarily overwrites a price which was assigned to a PLU number.

6. [PLU] (Price Look Up) - Registers a preset price of an individual item to the appropriate department. Also used to print PLU Reports.

7. [Dept Shift] (Department Shift) - Allows price entries for depart- ments 21-40. Press this key before entering applicable department keys 21-40.

8. [Return] - Issues refunds for returned merchandise. Refund totals are printed in the management report.

9. [Non Tax] - Used when no tax is to be registered for a department which is programmed for tax.

10. [Set Tax] - Used to program VAT rates.

11. [+%/PO] (Dual function: Percent Plus and Paid Out) - When used as the +% key, adds a percentage to an item or to the sales total. Total percent plus amounts are shown in the management report. When used as the PO key, registers any money paid out. Paid out totals appear in the management report. Also used to set a machine number.

12. [-%/RA] (Dual function: Percent Discount and Received On

Account) - When used as the -% key, subtracts a percentage from an item or from the sales total. Total discount amounts are shown in the management report. When used as the RA key, registers any payment made to the cash drawer. Amounts are added to the received on account total in the management report.

13.[Void] - Deletes the last item entered and used for correcting a

particular entry after it is processed and printed. Void totals are reported in the management report. Also used during cash register options programming.

14.[-] - Subtracts an amount from an item or the sales total. Minus key

totals are printed in the management report.

15. [Clear] - Clears an entry made from the numeric keypad or with the [Qty/Date] key before finalizing a transaction with a Department or function key. This key is also used to clear error conditions.

16.[.] (Decimal Point) - Used to enter fractional quantities of items being sold. In all modes, the decimal point is not to be used when entering a price.

17. [0 - 9/00] - Input amounts, indicate how many times a particular item repeats, add and subtract percentage rates, input department code numbers, handle figures which require a decimal point. The double key allows the quick entry of numbers with two or more zeros.

18.[1-40] (Departments 1 through 40) - Used to enter single or multiple item sales to a particular department. Department totals are shown in the management report. Also used to input characters for clerk names, captions, etc.

19. [Check] - Totals sales paid by check. Check totals are printed in the management report. Also stores character code entries during cash register programming.

20. [Charge] - Totals sales that are charged. Charge totals are printed in the management report.

6

ENGLISH

21.[Subtotal w/Tax] - Displays the subtotal of a sale with sales tax.

22. [Euro] - When the cash register is in its default Local base cur-

rency, this key is used to program the Euro exchange rate and to automatically calculate and display the value in Euro of the total amount of a sale or of a particular amount registered. When the cash register is programmed to work in the Euro base currency, pressing this key converts the sales total to the Local currency.

23.[Amt Tend/TOTAL] (Amount Tendered/TOTAL) - Totals exact

cash transactions, computes change and totals check and charge transactions.

The ContrThe Contr

The Contr

ol Systemol System

ol System

The ContrThe Contr

The Contr

ol Locol Loc

ol Loc

kk

k

The control lock is located on the upper left-hand side of the keypad. The PRG key must be properly inserted in the Control Lock in order for you to be able to use the different cash register functions available. The following figure shows the Control Lock and the different modes which can be used.

Depending on the desired operation, insert the key in the Control

Lock and turn it to the following positions: PRG Used to program the cash register according to your

specific needs. OFF The cash register is turned off and cannot be used. REG 1 The cash register can perform the standard sales

transactions. In this mode the preset or programmed

header is printed on both the customer receipt and journal

(if loaded). This is also called the Receipt Mode. REG 2 Same as the REG 1 mode with the only exception that the

preset or programmed header is not printed on the

customer receipt nor journal. This is also called the

Journal Mode. X Prints the X management report, Cash-in-Drawer report,

PLU report, clerk report, cash declaration and periodical

financial reports. Z Prints the Z management report and resets totals (except

the grand total) to zero. Prints the PLU report, clerk

report, cash declaration and periodical financial reports.

ContrContr

Contr

ol Kol K

ol K

ee

e

yy

y

The following key is provided as well as a set of keys to open the

cash drawer and printer compartment: PRG The PROGRAM key works in all modes (PRG, OFF,

REG 1, REG 2, X and Z). It is usually used to program

the cash register, access cash register functions and print

X and Z management reports.

7

ENGLISH

Cash DrawCash Draw

Cash Draw

er with Remoer with Remo

er with Remo

vv

v

aa

a

ble Cash Binble Cash Bin

ble Cash Bin

The cash drawer features a cash bin with slots for banknotes and slots

for coins. Pressing the [#/ST/NS] with the control key in the REG 1 or REG 2 position opens the drawer. If a clerk number and secret code have been set, pressing this key will open the cash drawer only after the clerk number and code have been specified. This drawer can be locked for security to prevent accidental opening when moving the cash register by using the printer compartment key.

If desired, the cash bin inside the cash drawer can be completely removed from the cash register. To do so, gently lift the bin and pull it out.

Deposit DrawDeposit Draw

Deposit Draw

erer

er

This extra drawer provides sufficient space for miscellaneous items.

OperaOpera

Opera

tor and Customer Displaystor and Customer Displays

tor and Customer Displays

Your cash register offers two displays which provide easy viewing for both the customer and operator during a sales transaction. The customer display shows entry amounts and related transaction information through the use of numbers and special symbols. The operator display shows specific operator messages on the upper 10-character line and the same transaction data as shown on the customer display on the lower 10-character line. Both displays are read from left to right.

AA

A

utomautoma

utoma

tic tic

tic

Time DisplayTime Display

Time Display

The current time is automatically displayed after 30 seconds of cash register inactivity when the control key is in the REG 1 or REG 2 position.

DaDa

Da

te Displayte Display

te Display

You can display the date by simply pressing the [Qty/Date] key with

the cash register in the REG 1 or REG 2 mode. Once the date is displayed, the time will be automatically redisplayed after 30 seconds of cash register inactivity.

Special Symbol IndicaSpecial Symbol Indica

Special Symbol Indica

tortor

tor

ss

s

Special symbols appear at the far left-hand side of the displays during cash register operation. These symbols identify the amount shown, or warn of an error condition. They include:

C (Change) Indicates that the displayed amount is the change due

to the customer.

E (Error) Indicates when an error is made during operation or

when programming the cash register. An error tone sounds to alert the operator.

S (Sub-total) Indicates that the amount shown is the subtotal of a

transaction, including sales tax if applicable.

= (Total) Indicates that the amount shown is the transaction total.

- (Minus) Displays a negative entry. Also displays if subtotal or cash

tendered total is a negative number due to a return or refund.

Indicates when the journal paper is low.

CA (Cash) Indicates when the total displayed refers to a sales

transaction paid by cash.

Ch (Check) Indicates when the total displayed refers to a sales

transaction paid by check.

Cr (Charge) Indicates when the total displayed refers to a sales

transaction paid by charge. Displayed when the Euro key is pressed to indicate that

the amount is displayed in the Euro currency.

8

ENGLISH

These symbols clear automatically when you start the next entry or

press the [Clear] key.

PP

P

ositioning the Customer Displayositioning the Customer Display

ositioning the Customer Display

To position the customer display, simply rotate it to the position

desired.

ErrErr

Err

or Conditionsor Conditions

or Conditions

The ErrThe Err

The Err

or or

or

AlarAlar

Alar

mm

m

The error alarm warns of an operator error (usually when a wrong key is pressed for a specific type of entry) or of an error made during cash register programming. The error alarm can also indicate that the Control Lock is in the wrong position for the current operation. In case of error, the error tone sounds, the letter E is displayed on the customer display, the message ERROR is displayed on the operator display and the keypad locks.

ClearClear

Clear

ing an Erring an Err

ing an Err

oror

or

Press the [Clear] key to clear an error. The tone ends, the displays clear and the keypad unlocks, allowing you to continue with the transaction or restart the program.

If an error condition cannot be cleared, perform a general clearance. Bear in mind, however, that one of the two general clearance

procedures, explained in the next section, will set all counters and totals to zero and will cancel all programmed functions.

NOTE: The [Clear] key also clears an incorrect entry from the display

prior to pressing a registration key. Once an entry is printed, the [Void] key must be used to correct an error.

General ClearanceGeneral Clearance

General Clearance

If the cash register does not function, for example while programming

and the error signal cannot be stopped by pressing the [Clear] key, perform a general clearance. There are two ways of performing a general clearance, whereby the second method resets all totals and

counters and cancels the programming. Use this method only as last resort.

General Clearance without ClearGeneral Clearance without Clear

General Clearance without Clear

ing ing

ing

TT

T

otals and theotals and the

otals and the

PrPr

Pr

ogrammingogramming

ogramming

1. Turn the Control Key to the OFF position.

2. Make sure four charged AA batteries are inserted in the battery

compartment.

3. Unplug the cash register from the power socket.

4. Wait ten seconds and then reconnect the cash register to the power socket and resume your operation.

If the cash register remains in an error condition, proceed with the

second general clearance method.

General Clearance with the ClearGeneral Clearance with the Clear

General Clearance with the Clear

ing of ing of

ing of

TT

T

otals and allotals and all

otals and all

Cash RegCash Reg

Cash Reg

ister Prister Pr

ister Pr

ogrammingogramming

ogramming

NOTE: Be careful that this procedure erases all totals and counters,

and cancels the programming of the cash register.

1. Turn the control key to the OFF position.

2. Open the printer compartment cover and remove the back-up batteries.

3. Unplug the cash register from the power socket.

4. Wait for five minutes and then plug the cash register back to the electrical power outlet.

5. Insert the batteries once again.

6. Reprogram the cash register.

9

ENGLISH

VV

V

oiding Erroiding Err

oiding Err

oror

or

ss

s

Once an entry is printed, the [Clear] key cannot be used to clear an

error. Press the [Void] key to correct an error already registered.

VV

V

oiding the Entroiding the Entr

oiding the Entr

y Just Completedy Just Completed

y Just Completed

Simply press the [Void] key. The entry is reprinted with a "-" symbol

followed by the amount and erased from the transaction.

VV

V

oiding an Earoiding an Ear

oiding an Ear

lier Entrlier Entr

lier Entr

yy

y

To void an earlier entry, register it again and then cancel it using the

[Void] key. When a transaction including the error is completed, proceed with the following steps to void the error.

1. Retype the incorrect information, exactly as originally entered, and

press the [Void] key.

2. Enter the correct amount.

3. Total the transaction by pressing the [Amt Tend/TOTAL] key.

BacBac

Bac

k-up Bak-up Ba

k-up Ba

ttertter

tter

y Systemy System

y System

During cash register operations, all transaction data for the management report is stored in the register's memory. This memory also holds all optional programming information. The memory back-up system keeps this information stored in memory when the cash register is turned off.

The memory is protected by four "AA" batteries that come with your cash register. In order to guarantee continuous back-up protection, insert the batteries before beginning to program the cash register.

InserInser

Inser

ting/Replacing Bating/Replacing Ba

ting/Replacing Ba

ttertter

tter

iesies

ies

NOTE: Before inserting the batteries, make sure that the cash register

is plugged into the power socket and that the control key is switched to the OFF position.

Proceed as follows to insert or replace the batteries:

1. Unlock the printer compartment cover, grip the left side of the compartment cover, gently pull it back and then lift it off the cash register.

2. Lift the paper journal winder spindle out of the printer compartment.

10

ENGLISH

3. Remove the battery compartment cover by pressing on the arrow impressed on the cover and lifting upwards, as shown by the arrows in the figure.

4. Remove the discharged batteries if you are replacing the batteries.

5. Position the new batteries making sure that the positive and negative poles are aligned correctly. Drawings inside the battery compatment show how the batteries must be positioned.

6. Replace the battery compartment cover by sliding it down until it clicks into place.

7. Reposition the journal winder spindle, then reposition, close and lock the printer compartment cover.

NOTE: If the cash register will not be used for an extended period of

time, you may want to remove the back-up batteries to prolong their usage. Doing this will erase all transaction and programming data stored.

PrPr

Pr

inter Comparinter Compar

inter Compar

tmenttment

tment

The printer compartment is on the top left-hand side of the cash register. It houses the paper tape, journal winder spindle, inked ribbon cartridge, back-up batteries and the dot-matrix printer.

Ribbon CarRibbon Car

Ribbon Car

trtr

tr

idgeidge

idge

This cash register uses a standard inked ribbon cartridge which needs replacing when faded characters are starting to print. The next section explains how to install the ribbon cartridge.

11

ENGLISH

Installing the Ribbon CarInstalling the Ribbon Car

Installing the Ribbon Car

trtr

tr

idgeidge

idge

Proceed as follows to install the inked ribbon cartridge:

1. Unlock and open the printer compartment. If dual-ply paper is loaded in the cash register, lift the plastic

journal winder out of the cash register and unwind and free the journal record from the winder spindle. Then remove the paper tape from the print mechanism by sliding it backwards towards the rear of the cash register.

2. Lift the plastic paper guide out of the printer compartment by pulling it forward and then upward as indicated by the arrows in the figure.

3. Press the right-hand side of the cartridge to release it from its catches and then remove it from its slot.

4. Install the new ribbon cartridge by inserting the inked ribbon into the slot and then pressing the cartridge downward until it clicks into place.

12

ENGLISH

5. Turn the ribbon tension knob on the left-hand side cartridge clockwise (in the direction of the arrow on the cartridge) to properly tension the ribbon.

6. Replace the plastic paper guide by following its removal procedure in reverse order.

7. If the cash register was using dual-ply paper, load the paper tape back through the print mechanism, and wind the journal back onto the plastic journal winder spindle. Instructions on how to load dualply paper are provided in the next section.

8. Reposition, close and lock the printer compartment cover.

PP

P

aa

a

per per

per

TT

T

aa

a

pepe

pe

This cash register uses standard 2 1/4" (57 mm) paper. The paper needs to be changed when a red line appears on the tape. You can use either single-ply or dual-ply paper. Use dual-ply paper whenever you want to print customer receipts and journal records, single-ply when just customer receipts need to be printed.

Loading Single-Ply and Dual-Ply PLoading Single-Ply and Dual-Ply P

Loading Single-Ply and Dual-Ply P

aa

a

perper

per

Proceed as follows to load the cash register with either single-ply or dual-ply paper.

1. Make sure the cash register is plugged into a grounded power outlet

and that the control key is in either one of the two REG positions.

2. Unlock and open the printer compartment, then remove the plastic

journal winder spindle.

3. With a pair of scissors, cut the end of the paper tape to create a straight, even edge so that the paper can be properly fed through the print mechanism.

4. Set the paper roll in the bottom of the printer compartment so that the paper feeds out from the bottom of the roll.

5. Insert the edge of the paper into the paper slot as shown in the figure.

13

ENGLISH

6. Press the [Feed] key and manually feed the paper into the slot until

the paper catches and advances approximately six to ten inches above the print mechanism.

NOTE: If the paper does not feed properly, check the alignment of the

paper in the slot and/or for the straight edge on the end of the paper roll.

7. If you are loading dual-ply paper for a journal record, slide the top edge of the inner ply through the slots on the plastic journal winder spindle and manually roll the winder toward the rear of the rear of the cash register to take up slack in the tape. Make sure that the two wheels on the spindle are positioned towards the right-hand side.

8. Replace the journal winder spindle in the printer compartment (the two wheels must be positioned towards the right-hand side).

9. Pass the edge of the customer receipt (or the outer ply when using dual-ply paper) through the receipt window on the compartment cover.

10.Reposition, close and lock the printer compartment cover.

QuicQuic

Quic

k Stark Star

k Star

tt

t

Quick Start is a brief but complete start-up procedure that allows you to begin using your new cash register as quickly as possible. Carefully follow the steps listed below:

1. Make sure cash register is plugged into a grounded power outlet.

2. Insert the PRG key into the Control Lock and turn it to the PRG

position.

3. Set the current date in the day/month/year format by typing the

corresponding numeric keys and then pressing [#/ST/NS]. Single digits must be preceded by a zero. For example, to set August 5, 1998, type [050898] and then press the [#/ST/NS] key to store your entry. The newly entered date is printed.

If you wish that the date just entered be printed and displayed in the month/day/year format, type [40] and then press the [Void] Key.

14

ENGLISH

4. Set the current time using the 24-hour (military) format and then

pressing [Qty/Date]. Also in this case single digits must be preceded by a zero. For example, to set 1:05 P.M., type [1305] and then press the [Qty/Date] to store your entry. To set 9:15 A.M., type [0915] and then press [Qty/Date]. The newly defined time is printed.

If you wish that the time just entered be printed and displayed in the 24-hour format, type [180] and then press the [Void] Key.

5. Set a machine number by entering a four digit number and then

pressing [+%/PO]. For example, to set machine number 5, type [0005] and then press [+%/PO]. The newly assigned machine number is printed.

6. Set the first of up to four possible VAT rates. For example, to set a

VAT1 rate of 5.5%, type [1] and then press the [Tax Set] key, type [5500] (three digits must be entered after the desired decimal point) and then confirm with the [Amt Tend/TOTAL] key. The VAT rate followed by T1 is printed.

7. Program standard Department 1 as VAT1 to a single item price sale. For example, to assign VAT1, single item cash sale and a price of £3.00 to standard Department 1, type [01001] and then press [Subtotal w/Tax], type [300] and then press [Department 1/9]. Press the [Clear] key to clear the displays.

8. Change, if necessary, the language in which the cash register prints the customer receipt and journal record. The cash register is programmed to print the customer receipt and journal record in English. If you wish to reprogram the cash register to print in Spanish, French or German: Type [19] followed by [1] and [Void] to print in Spanish, [19] followed by [2] and [Void] to print in French or [19] followed by [3] and [Void] to print in German. To print in English again, type [19] followed by [0].

9. When programming is complete, exit the program mode by turning the PRG key to the OFF position.

10.Practice normal sales transactions by switching the cash register into the Training Mode. This mode is very useful to new users as it allows them to simulate sales transactions without recording these trials in the X or Z management reports. More information on this mode is give in the section entitled Training Mode.

Once you have mastered the Quick Start operations, you will undoubtedly want to expand your use of the machine by studying other sections of this manual and incorporating new programming into your personalized cash management system. For example, other valueable functions include Percent Discount Rate, Percent Plus Rate, Price Look-Ups (PLUs), Euro Currency Conversions, and many more.

Helpful Hints fHelpful Hints f

Helpful Hints f

or a Successfull Staror a Successfull Star

or a Successfull Star

t-Upt-Up

t-Up

This cash register has up to 40 departments available. You may assign the taxable status to any other department by repeating the tax assignment procedure used for Department 1. For departments 21-40, press the [Dept Shift] key before the applicable department key. For example, to select Department 26 press [Dept Shift] followed by the [Department 6/26] key.

TT

T

raining Moderaining Mode

raining Mode

The optional training mode is designed to help you become better acquainted with the register mode and offers an ideal place for beginners to practice transaction examples. Once the training mode is activated, you cannot operate in the PRG, X or Z modes. The transactions made in the training mode are not recorded in the X or Z reports and are not summed to machine totals. Receipt numbers are not counted either; four asterisks (****) are printed instead of the consecutive receipt number.

15

ENGLISH

ActivActiv

Activ

aa

a

ting the ting the

ting the

TT

T

raining Moderaining Mode

raining Mode

Proceed as follows to switch the cash register into the training

mode:

1. Turn the PRG control key to the PRG position.

2. Type [666666] and press the [Amt Tend/TOTAL] key. A dot

indicating the Training Mode On condition is displayed on the lefthand side of the operator and customer displays.

3. Turn the key to the REG 1 or REG 2 position to perform normal cash register operations.

Exiting the Exiting the

Exiting the

TT

T

raining Moderaining Mode

raining Mode

Proceed as follows to exit the training mode and therefore re-enable the cash register to record all sales transactions in the X and Z management reports and in the machine totals.

1. Turn the PRG control key to the PRG position.

2. Type [555555] and press the [Amt Tend/TOTAL] key.

3. Turn the key to the desired operating position.

Cash RegCash Reg

Cash Reg

ister Prister Pr

ister Pr

ogrammingogramming

ogramming

This cash register can be programmed to tailor its features according

to your specific needs. This programming facility allows you to:

• Define three-digit secret codes for each of the 15 programmable clerks

• Define clerk names

• Set a machine number

• Set the date and time

• Personalize customer receipt headers

• Set percent discount (-%) rates

• Set percent plus (+%) rates

• Define fraction rounding

• Define decimal point positions

• Define up to four VAT rates

• Define Price Look-Ups (PLUs) for individual items and enter an item description

• Define tax status and High Digit Lock Out to the minus key

• Define tax status, High Digit Lock Out, Single/Multiple item sale and relative price to a determined defined department

• Set an exchange rate for the Euro currency

• Personalize currency convert captions and credit captions on the receipts and reports

• Program time reports

• Program the different system options available

• Define manager passwords for the PRG, X and Z modes.

Set some of or all of the above features, depending on your business needs. These program settings will reside in the cash register's memory until you change them or deactivate the battery back-up system.

16

ENGLISH

Setting Cash RegSetting Cash Reg

Setting Cash Reg

ister Fister F

ister F

eaea

ea

turtur

tur

eses

es

All cash register features are programmed by first switching the

cash register into the program (PRG) mode.

This chapter provides simple step-by-step procedures on how to program the cash register. An example is provided after each procedure. It is suggested that you first run through all the examples to become familiar with the cash register's programming facilities, then program the cash register according to your own specific needs.

NOTE: Program all the desired features at the same time in order to

create a single receipt of all selections. Keep the receipt in a safe place for future reference.

Making Changes to Cash RegMaking Changes to Cash Reg

Making Changes to Cash Reg

ister Prister Pr

ister Pr

ogrammingogramming

ogramming

Once the cash register is programmed to satisfy your specific needs, there is no need to reprogram the entire machine to make single program changes or corrections. If you wish to make a change (such as an update to VAT rates, PLUs or Euro exchange rates), be sure you are in the program mode, re-do the program in question and finalize when you are ready to exit the programming mode. A new program entry will automatically overwrite a previous entry for the same program.

EnterEnter

Enter

ing the Pring the Pr

ing the Pr

ogram Modeogram Mode

ogram Mode

To enter into the program mode simply insert the PRG key into the Control Lock and turn it to the PRG position.

Exiting the PrExiting the Pr

Exiting the Pr

ogram Modeogram Mode

ogram Mode

Proceed as follows to exit the program mode once you have finished

programming the cash register:

1. Print a Program Tape by pressing [999999] followed by the [Amt Tend/TOTAL] key, as explained in the section entitled Overall Programming Dump Report, for a printed report on how the cash register is currently programmed.

2. Store the program tape in a safe place for future reference.

3. Turn the PRG key to the REG position if you wish to carry out sales transactions, or to the OFF position if you wish to exit.

ClearClear

Clear

ing Erring Err

ing Err

oror

or

ss

s

To clear an error made during the programming phase, simply press

the [Clear] key. The error tone ends, the display clears and the keypad unlocks.

In case an error condition cannot be cleared, perform one of the two

general clearance methods explained in the section entitled General Clearance. Remember that the second general clearance sets all

counters and totals to zero, and cancels all features programmed.

17

ENGLISH

ClerCler

Cler

k Numberk Number

k Number

ss

s

,,

,

Secr Secr

Secr

et Codes and Nameset Codes and Names

et Codes and Names

Clerk codes are a special security feature to control access to the register. You can program up to 15 individual clerk numbers linked to secret entry codes of three digits each. By enabling the Clerk System Active option as indicated in the Programming System Options section, the register assigns the default security [000] to all clerks. You can also assign a name to each of the 15 Clerks, which will be printed on the customer receipts, on the journal (if used) and on all management reports analysing the transactions of that specific Clerk.

PrPr

Pr

ogramming a Secrogramming a Secr

ogramming a Secr

et Code Linket Code Link

et Code Link

ed to a Clered to a Cler

ed to a Cler

kk

k

NumberNumber

Number

1. Insert the PRG key into the Control Lock and turn it to the PRG

position.

2. Type [121] and then press the [Void] Key to activate the Clerk

system.

3. Type [444444] and press the [Amt Tend/TOTAL] key. The symbol

"C" is displayed on the left-hand of the displays and the message "CLERK PASS" is displayed on the upper row of the operator display.

4. Type a number to which the secret code will be linked.

5. Set a three-digit secret code by typing three [numeric keys].

6. Press the [Clerk] key.

Repeat the above operations (from step 4 to step 6) to assign a secret code to the remaining 14 Clerks or use the [Clear] key to exit from Clerk Secret Code programming.

If you wish to change the clerk's secret code and the Clerk system is already activated, there is no need to perform step 2 above.

Example: Assign secret code 106 to Clerk 1 for the first time. Type/Press:

[121] + [Void] + [444444] + [Amt Tend/TOTAL] + [1106] + [Clerk]

DeactivDeactiv

Deactiv

aa

a

ting the Clerting the Cler

ting the Cler

k Systemk System

k System

Proceed as follows if for any reason you wish to deactivate the Clerk system, in other words if you no longer want to enter a clerk number and related secret code to perform sales transactions.

1. Insert the PRG key into the Control Lock and turn it to the PRG

position.

2. Type [120] and then press the [Void] key.

EnterEnter

Enter

ing a Clering a Cler

ing a Cler

k Number/Secrk Number/Secr

k Number/Secr

et Code Befet Code Bef

et Code Bef

oror

or

e Cashe Cash

e Cash

RegReg

Reg

ister Operaister Opera

ister Opera

tionstions

tions

Proceed as follows to enter a defined Clerk number and secret code before using the cash register in REG 1/REG 2 operating mode.

1. Turn the Control Lock to the REG 1/REG 2 position.

2. Type a Clerk number [1, 2, ... or 15].

3. Type the corresponding three-digit code.

4. Press the [Clerk] Key.

The clerk number appears on the left-hand side of the operator and customer displays and the message "CLERK 1" or the name of the clerk is displayed on the upper line of the operator display and is printed under the date on the customer receipt and journal.

Assigning ClerAssigning Cler

Assigning Cler

k Namesk Names

k Names

This cash register feature is useful for rapid identification of the different clerks which are enabled to use the cash register. You can program a clerk name or identifier of up to 24 characters long by using the Character Code Table provided in the Appendix of this manual or by using the alphanumeric keypad. The assigned Clerk name will be automatically printed on all receipts, journal records and management reports carried out with the associated clerk number and displayed on the upper row of the operator display. However, you can also program the cash register not to print the assigned Clerk name. Refer to the section entitled Programming System Options for more information.

18

ENGLISH

Proceed as follows to define a clerk name using the Character Code

Table:

1. Turn the PRG key to the PRG position.

2. Type the number of the Clerk whose name is to be defined.

3. Press the [Return] key. The letter "P" appears on the left-hand side

of the operator and customer displays while the message "CLERK NAME" is displayed on the operator display.

4. With reference to the Character Code Table in the Appendix, type the string of character codes to define the letters of a name and then press the [Check] key. The name entered will be automatically printed.

Example: Program Christina as the name for Clerk number 1. Type/Press:

1 + [Return] + [43 09 19 10 20 21 10 15 02] + [Check]

You can also define a clerk name by using the alphanumeric keypad.

Proceed as follows to do so:

1. Turn the PRG key to the PRG position.

2. Type the number of the Clerk whose name is to be defined.

3. Press the [Return] key. The letter "P" appears on the left-hand side of the operator and customer display while the message "CLERK NAME" is displayed on the operator display.

4. Type the [Dept] key corresponding to the letter wanted. If the letter wanted is on the bottom half of the [Dept] key, press the [Dept Shift] key first then the related [Dept] key. After entering the letter string wanted, press the [Check] key.

Example: Program Alex as the name for Clerk number 2. Type/Press:

2 + [Return] + [1/21 12/32 5/25] + [Dept Shift] + [4/24] + [Check]

Machine NumberMachine Number

Machine Number

ss

s

The machine number is a four-digit number used to identify the cash register. The machine number is printed on all receipts, journal records and management report.

Proceed as follows to set a machine number:

1. Turn the PRG key to the PRG position.

2. Type the [numeric keys] corresponding to the machine number to

be assigned (up to 4 digits, 0-9999).

3. Press the [+%/PO] key.

Example: Program machine number 1234. Type/Press:

[1234] + [+%/PO]

DaDa

Da

te and te and

te and

TimeTime

Time

Set the date option to print the current date at the top of each receipt, journal record or management report. The date will print in the day/ month/year format unless otherwise programmed as explained in the section entitled Programming System Options. You can display the date by pressing the [Qty/Date] key when the cash register is in the REG mode.

Set the time option to print the current time at the bottom of the receipt. The time prints in the hour:minutes format. The time is automatically shown on both customer and operator displays after 30 seconds of cash register inactivity.

The date and time change automatically as long as the cash register is plugged into the wall outlet or the battery back-up system remains active.

19

ENGLISH

Setting the DaSetting the Da

Setting the Da

tete

te

Proceed as follows to set the current date:

1. Turn the PRG key to the PRG position.

2. Type the [numeric keys] representing the current date. Remember

to use the DDMMYY format. Single digit numbers for months and days must be preceded by a zero (0).

3. Press the [#/ST/NS] key to store the date. The date entered is

printed.

4. Press the [Clear] key to program another feature or exit the program

mode by turning the PRG key to the OFF position.

Example: Set a date of August 5, 1998. Type/Press:

[050898] + [#/ST/NS]

NOTE: If you wish that the date just entered be printed and displayed

in the month/day/year format, type [40] and then press the [Void] Key. More information on how to change the cash register's basic programming is explained in the section Programming System Options.

Setting the Setting the

Setting the

TimeTime

Time

Proceed as follows to set the correct time in the hour:minutes format:

1. Turn the PRG key to the PRG position.

2. Type the [current time] using the HH:MM format. NOTE: Time is set according to international, or military time

(24-hour clock format). To correctly enter this time, simply add 12 to all hours in the PM. For example, to set the time to 9:00 AM, type [0900]; to set the time to 2:15 PM, type [1415].

3. Press the [Qty/Date] key to store the entered time. The newly

defined time is automatically printed.

4. Press the [Clear] key to program another feature or exit program

mode by turning the PRG key to the OFF position.

Example: Set the time at 3:30 PM. Type/Press:

[1530] + [Qty/Date]

NOTE: If you wish that the time just entered be printed and displayed

in the 24-hour format, type [180] and then press the [Void] Key. More information on how to change the cash register's basic programming is explained in the section Programming System Options.

Receipt HeaderReceipt Header

Receipt Header

Your cash register is programmed to print a courtesy header enclosed in a box delimited by asteriscs, on all customer receipts when the control lock is in the REG 1, X and Z positions. With the control lock in the REG 2 and PRG positions, the header will not be printed.

NOTE: You can change the programmed language in which the cash

register prints the header on the customer receipt and journal record. Turn to the section Programming System Options, Machine Condition 19, to see in which languages the cash register can print the receipt header.

The receipt header can consist of up to five lines of 24 characters each. You can change the cash register's default header according to your own business needs by using the alphanumeric keypad or the Character Code Table provided in the Appendix, to enter the characters for your new header.

PP

P

erer

er

sonalizing the Receipt Headersonalizing the Receipt Header

sonalizing the Receipt Header

Proceed as follows to change the default receipt header:

1. Turn the PRG key to the PRG position.

2. Type [3] followed by the [number] of the line (n = 1....5) you wish

to modify and then press the [Return] key. The letter "P" appears on the left-hand side of the displays and the message "LOGO LINE n" is displayed on the operator display where n is the number of the line to change.

20

ENGLISH

3. Using the cash register's aphanumeric keypad or the Character Code Table in the Appendix, type the character code string for the letters to be entered on this particular line selected. Remember that up to 24 characters can be entered. If you wish to center a writing, you will need to calculate the empty character spaces before and after your string and type the appropriate blank space code (00) in the corresponding places.

4. Press the [Check] key again to store the newly defined header line. This new line is automatically printed.

5. Repeat steps 3 and 4 if you wish to program the remaining three programmable header lines.

Example: Change the fourth line of the default header to *PLEASE COME AGAIN* with the appropriate spaces before and after to center this new string and using the Character Code Table provided in the Appendix.

Type/Press:

[3] + [4] + [Return] + [76 00 00] + [56 52 45 41 59 45 00] + [43 55 53 45 00] + [41 47 41 49 54] + [00 00 00 76] + [Check]

NOTE: If you wish to use the alphanumeric keypad to type the header

PLEASE COME AGAIN, type [00] for the spaces and then press the Dept key corresponding to the letter wanted. If the letter wanted is on the bottom half of the key, firstly press the [Dept Shift] key and then the related [Dept] key. The asterisk can only be entered by typing its corresponding code (76) from the Character Code Table in the Appendix.

PP

P

erer

er

cent Discount (-%)cent Discount (-%)

cent Discount (-%)

Setting this option automatically calculates the preset rate each time the [-%/RA] key is pressed. The percentage rate can be discounted from an individual item or from a sales transaction total.

Setting a PSetting a P

Setting a P

erer

er

cent Discount (-%) Racent Discount (-%) Ra

cent Discount (-%) Ra

tete

te

Proceed as follows to define a standard discount rate:

1. Turn the PRG key to the PRG position.

2. Type the [numbers] representing the desired percentage rate. Up to four digits ranging from 0 to 99.99 can be used, and you MUST enter a total of four digits, two before and two after the desired decimal place. For example, to enter 10%, type [1000], to enter

6.5% type [0650].

3. Press the [0] key followed by the [-%/RA] key to store the rate. The programmed rate is printed with the caption "DISCOUNT".

4. Press the [Clear] key to program another feature otherwise exit the program mode by turning the key to the OFF position.

Example: Program a standard 10% discount rate. Type/Press:

[1000] + [0] + [-%/RA] + [Clear]

PP

P

erer

er

cent Plus Racent Plus Ra

cent Plus Ra

te (+%)te (+%)

te (+%)

Setting this option automatically calculates the preset add-on rate each time the [+%/PO] key is pressed. This percentage rate can be added to an individual item or to a transaction total.

Setting a PSetting a P

Setting a P

erer

er

cent Plus (+%) Racent Plus (+%) Ra

cent Plus (+%) Ra

tete

te

Proceed as follows to define a standard add-on rate:

1. Turn the PRG key to the PRG position.

2. Type the [numbers] representing the desired percentage rate. Up to

four digits ranging from 0 to 99.99 can be used, and you MUST enter a total of four digits, two before and two after the desired decimal place. For example, to enter 10%, type [1000], to enter

6.5% type [0650].

3. Press the [0] key followed by the [+%/PO] key to store the rate.

The programmed rate is printed along with the caption "ADD ON".

21

ENGLISH

4. Press the [Clear] key to program another feature otherwise exit the

program mode by turning the PRG key to the OFF position.

Example: Program a standard 3% add-on rate. Type/Press:

[0300] + [0] + [+%/PO] + [Clear]

Fraction RoundingFraction Rounding

Fraction Rounding

Fraction rounding is used to round figures with decimals up or down to the nearest whole numbers and is used for percent tax, percent discount and percent add-on calculations. Choose from the following three options to select the rounding as needed:

Rounding Code Fraction Rounding

00 a fraction of a pence is rounded down one pence 50 a fraction under one half pence is rounded

down one pence, a fraction above one half pence is rounded up one pence

99 a fraction of a pence is rounded up one pence

Setting the Rounding CodeSetting the Rounding Code

Setting the Rounding Code

Proceed as follows to program fraction rounding:

1. Turn the PRG key to the PRG position.

2. Type the [rounding code] and press the [Charge] key. The

programmed rounding code is automatically printed along with the caption "CHARGE".

3. Press the [Clear] key to program another feature, otherwise exit the

program mode by turning the PRG to the OFF position.

Example: Program the rounding code so that a fraction under one half pence is rounded down one pence, a fraction above one half pence is rounded up one pence up.

Type/Press:

[50] + [Charge] + [Clear]

Decimal PDecimal P

Decimal P

oint Point P

oint P

ositionosition

osition

The decimal point setting is preset to the x.xx format. This format

can be changed, as needed, to one of the other settings below.

ChangChang

Chang

ing the Decimal Ping the Decimal P

ing the Decimal P

oint Point P

oint P

ositionosition

osition

Proceed as follows to define a new position for the decimal point.

1. Turn the PRG key to the PRG position.

2. Type the status number [0, 1, 2 or 3] to select the desired format as

indicated in the following table:

Status Number Format

0x. 1 x.x 2 x.xx 3 x.xxx

3. Press the [-%/RA] key to set the new format. The setting made is

automatically printed along with the caption "R-A-".

4. Press the [Clear] key to program another feature, otherwise exit the

program mode by turning the PRG to the OFF position.

Example: Program the cash register so that two digits are left after the decimal point.

Type/Press:

[2] + [-%/RA] + [Clear]

22

ENGLISH

VV

V

alue alue

alue

Added Added

Added

TT

T

ax (Vax (V

ax (V

AA

A

T) RaT) Ra

T) Ra

testes

tes

Up to four VAT rates (VAT 1, VAT 2, VAT 3 and VAT 4) can be preset in the cash register. A maximum 5-digit VAT rate can be programmed (0-99.999%).

Setting a FixSetting a Fix

Setting a Fix

ed ed

ed

VV

V

AA

A

T RaT Ra

T Ra

tete

te

Proceed as follows to program a fixed tax rate:

1. Turn the PRG key to the PRG position.

2. Type the [numbers] which represent the VAT (1 for VAT 1, 2 for

VAT2, 3 for VAT 3 and 4 for VAT 4).

3. Press the [Tax Set] key. The message "TAX n RATE" appears on

the operator display where n is the number representing the VAT rate.

4. Type the VAT rate. Up to five digits can be used, and you MUST

enter three digits after the desired decimal place. For example, to enter a 5.5% VAT rate, type [5500]; to enter a 7% VAT rate, type [7000].

5. Press the [Amt Tend/TOTAL] key. The tax rate entered followed

by its alphanumeric identifier (T1, T2, T3 or T4) is printed.

NOTE: If you make an error, press the [Clear] key and start again

from step 3.

6. Press the [Clear] key to program another feature, otherwise exit the

program mode by turning the PRG key to the OFF position.

Example: Set a VAT 1 rate of 5.5%, VAT 2 rate of 7%, VAT 3 rate of 15% and a VAT 4 rate of 20%.

Type/Press:

[1] + [Tax Set] + [5500] + [Amt Tend/TOTAL] [2] + [Tax Set] + [7000] + [Amt Tend/TOTAL] [3] + [Tax Set] + [15000] + [Amt Tend/TOTAL] [4] + [Tax Set] + [20000] + [Amt Tend/TOTAL]

High DigHigh Dig

High Dig

it Locit Loc

it Loc

k Out (HDLO) and k Out (HDLO) and

k Out (HDLO) and

TT

T

ax Staax Sta

ax Sta

tustus

tus

Assigned to the Minus KAssigned to the Minus K

Assigned to the Minus K

ee

e

y (-)y (-)

y (-)

You can limit the number of digits, i.e. the maximum value of a minus key operation, from 1 to 6 digits. This makes sure that minus key amounts do not exceed a maximum amount. You can also assign a VAT rate or a non tax status to the minus key.

Make your selections for this feature from the following options:

High Digit Lock Out Taxation

0 = No HDLO 00 = Non taxable

1 = 1 digit (0.09) 01 = VAT 1

2 = 2 digits (0.99) 02 = VAT 2

3 = 3 digits (9.99) 03 = VAT 3

4 = 4 digits (99.99) 04 = VAT 4

5 = 5 digits (999.99)

6 = 6 digits (9999.99)

PrPr

Pr

ogramming the High Digogramming the High Dig

ogramming the High Dig

it Locit Loc

it Loc

k Out and k Out and

k Out and

TT

T

ax Staax Sta

ax Sta

tustus

tus

1. Turn the PRG key to the PRG position.

2. Type the HDLO code [0-6].

3. Type the tax status code [00-04].

4. Press the [-] key. A minus sign appears on the displays and the

caption "COUPON" is printed on the receipt along with the programmed tax status.

5. Press the [Clear] key to program another feature, otherwise exit the

program mode by turning the PRG key to the OFF position.

Example: Allocate a maximum of 5 digits and VAT 2 to the minus key. Type/Press:

[5] + [02] + [-]

23

ENGLISH

TT

T

ax Staax Sta

ax Sta

tustus

tus

,,

,

High Dig High Dig

High Dig

it Locit Loc

it Loc

k Out,k Out,

k Out,

Single/Multiple Single/Multiple

Single/Multiple

Item Sale and PrItem Sale and Pr

Item Sale and Pr

ice Linkice Link

ice Link

ed to a Depared to a Depar

ed to a Depar

tmenttment

tment

You can assign the following to individual departments:

• A department status, consisting of:

- Department definition, meaning a Standard department where ordinary items are sold or a Gallonage department where oil, liquids, etc. are sold at unit price per gallon, liter, etc.

- Single item cash sale or multiple item sale capability whereby the department will ring up each item entered as a single item sale with exact change tender or as a multiple item sale.

- A High Digit Lock Out code whereby you prohibit item entries for a certain number of digits and above.

- A taxable or non-taxable status.

• The price which will ring up automatically every time the appropriate department key has been pressed. You can also skip this option, in which case the price has to be entered manually before pressing the department key.

• A maximum 12-character description of the item associated to the specific department key.

The 5-digit department status can be programmed using the following

options:

Dept. Def. Single/Multiple Item High Digit Lock Out T ax Status

Cash Sale

0 = Standard 0 = Normal 0 = No HDLO 00 = Non tax. Dept. 1 = Single item cash 1 = 1 digit (0.09) 01 = VAT 1 1 = Gallonage 2 = 2 digits (0.99) 02 = VAT 2 Dept. 3 = 3 digits (9.99) 03 = V AT 3

4 = 4 digits (99.99) 04 = VAT 4 5 = 5 digits (999.99) 6 = 6 digits (9999.99)

If Gallonage is selected as the department definition, during a sales transaction the three numbers entered after the decimal point will be rounded off according to the fraction rounding setting.

Linking an HDLOLinking an HDLO

Linking an HDLO

,,

,

TT

T

ax Staax Sta

ax Sta

tustus

tus

,,

,

Single/Multiple Item Cash Single/Multiple Item Cash

Single/Multiple Item Cash

Sale,Sale,

Sale,

Item Pr Item Pr

Item Pr

ice and Descrice and Descr

ice and Descr

iption to a Depaription to a Depar

iption to a Depar

tmenttment

tment

1. Turn the PRG key to the PRG position.

2. Type the [Department definition], [Single/Multiple Item Cash

Sale], [HDLO] and [Tax Status] options by referring to the previous table.

3. Press the [Subtotal w/Tax] key to confirm your entry. The message

"DEPT PRICE" appears on the operator display and the codes of the options programmed will be printed along with the caption "SUBTTL".

4. Type a [price] to assign to a specific item and then press the

relative [Department] key. The message "DEP n NAME" appears on the operator display and the amount entered is printed along with the caption "DEPT n", where the n in both cases represents the department number.

5. With reference to the Character Code Table in the Appendix or by

using the alphanumeric keypad, define the department descriptor (max 12 chars, spaces included).

6. Store the item descriptor entered by pressing the [Check] key.

7. Press the [Clear] key to program another feature, otherwise exit the

program mode by turning the PRG key to the OFF position.

Example: Assign no HDLO, VAT 1, multiple item sale, a price of £2.50 to an item in Standard Department 1 named Groceries defined using the Character Code Table.

Type/Press:

[0] + [0] + [5] + [01] + [Subtotal w/Tax] + [250] + [Department 1/21] + [47 58 55 43 45 58 49 45 59] + [Check]

24

ENGLISH

NOTE: If you wish to rename the Groceries department back to

DEPT 1, repeate the procedure and enter the character code string [44 45 56 60 00 31] (or type the related characters on the alphanumeric keypad).

PrPr

Pr

ice Look-Ups (PLUs)ice Look-Ups (PLUs)

ice Look-Ups (PLUs)

Price Look-Ups simplify cash register operations by automatically registering an individual item's price (up to 500 can be registered), maximum 12-character description (spaces included), department number, tax status and rate (if applicable). To look up individual item prices, simply type the item's corresponding PLU number [1] and press the [PLU] key.

CrCr

Cr

eaea

ea

ting Prting Pr

ting Pr

ice Look-Upsice Look-Ups

ice Look-Ups

Proceed as follows to create a price look-up:

1. Turn the PRG key to the PRG position.

2. Press the [Qty/Date] key. The message "PLU PRICE" appears on

the operator display and the number 001 is displayed on the lefthand side of the displays to indicate the first PLU number. If you wish to change the PLU number from 001 to another number such as 30, type [030] and then press the [PLU] key.

3. Type the [unit price] that you wish to assign to that PLU.

4. Press the appropriate [Department] key to assign the PLU to a

Department from 1 to 20. Use the [Dept Shift] key for departments from 21-40. The message "PLU NAME" is displayed while the PLU number, item price and department number are printed.

5. With reference to the Character Code Table in the Appendix or by

using the alphanumeric keypad, define a maximum 10-character description to the PLU item. For example, the item Coffee will have the [43 55 46 46 45 45] character code string if the Character Code Table is used.

6. Press the [Check] key to store the PLU item description which is

printed. The cash register automatically switches to the next PLU item number.

7. Press the [Qty/Date] key to program another feature, otherwise exit

the program mode.

Example: Create PLU 1 with a unit price of £2.69 assigned to Department 3 and name this item Coffee by using the Character Code Table and then create PLU 320 with a unit price of £5.00 assigned to Department 33 and name this item Books by using the alphanumeric keypad.

Type/Press:

[Qty/Date] + [269] + [Department 3/23] + [43 55 46 46 45 45] + [Check] + [320] + [PLU] + [500] + [Dept Shift] + [Dept 13/33] + Dept 2/22 Dept 15/35 Dept 15/35 Dept 11/31 Dept 19/39] + [Check] + [Qty/Date]

EurEur

Eur

o Exchange Rao Exchange Ra

o Exchange Ra

te and Receipt Cate and Receipt Ca

te and Receipt Ca

ption Prption Pr

ption Pr

o-o-

o-

gramminggramming

gramming

You can program the Euro exchange rate so that the cash register can automatically calculate the transaction from your local currency into the Euro currency and vice versa depending on the cash register's base currency (Local or Euro). The cash register is programmed by default so that your local currency is the base currency. If you wish to change the base currency to Euro, refer to the "Programming System Options" section in this manual, Machine Condition 31.

This cash register model also gives you the possibility of programming the receipt currency caption, from the default Local caption to, for example, your actual local currency descriptor (for example UK Pounds) or from the Euro caption to any other descriptor you wish. You can also change the convert total net sales caption on financial and management reports from the default CNV.NET to any other descriptor as required.

25

ENGLISH

PrPr

Pr

ogramming the Eurogramming the Eur

ogramming the Eur

o Exchange Rao Exchange Ra

o Exchange Ra

tete

te

Euro exchange rate programming consists of firstly defining the position of the decimal point of the Euro exchange rate (0-8 digits after the decimal point), the position for the decimal point of the changed amount which is also printed on the sales receipt (0-3 digits after the decimal point), and then the actual current exchange rate (up to 5 digits). To provide you with the Euro currency value, the cash register divides the local currency value by the exchange rate defined.

Proceed as follows to program or update the exchange rate of your local currency into Euro:

1. Turn the PRG key to the PRG position.

2. Type the [decimal point position] of the exchange rate (0-8 digits

after the decimal point).

3. Type the [decimal point position] of the converted amount (0-3

digits after the decimal point).

4. Type the [exchange rate] using up to six digits without specifying

any decimal point.

5. Press the [Euro] key to store the exchange rate. The rate entered is

automatically printed along with the caption "EURO".

Example: Program an exchange rate of £ 0.676 to the Euro. Type/Press:

[3] + [2] + [000676] + [Euro]

ChangChang

Chang

ing the Coning the Con

ing the Con

vv

v

erer

er

t Cat Ca

t Ca

ptions Prptions Pr

ptions Pr

inted on the Salesinted on the Sales

inted on the Sales

ReceiptReceipt

Receipt

By default the cash register prints one of two programmable convert captions to indicate a converted sales transaction total on the receipt; if the cash register is programmed with a Local base currency, the convert caption printed is "EURO" while if it is programmed with a Euro base currency, the convert caption printed is "LOCAL". If an exchange rate has been defined, the amounts indicated in both cases are the sales totals converted into the respective currency. If an exchange rate has not been defined, by default the cash register assumes a 1:1 conversion rate.

If you wish to avoid printing the Local or Euro converted sales total and just print the transaction total of the base currency, program the cash register to do so as indicated in the section entitled Programming System Options, Machine Condition 30.

If you have programmed the cash register for a Euro base currency, proceed as follows to change the LOCAL caption printed:

1. Turn the PRG key to the PRG position.

2. Type [41] and then press the [Return] key. The caption "LOCAL"

appears on the operator display.

3. With reference to the Character Code Table in the Appendix or by

using the alphanumeric keypad, define the new caption (max 10 characters, spaces included).

4. Press the [Check] key to confirm the new caption which is

automatically printed.

Example: Change the caption LOCAL to UK POUNDS by using the alphanumeric keypad.

Type/Press:

[41] + [Return] + [Dept Shift] [Dept. 1/21] + [Dept. 11/31] + [00] + [Dept. 16/36] + [Dept. 15/35] + [Dept Shift ] + [Dept. 1/21] + [Dept. 14/34] + [Dept. 4/24] + [Dept. 19/39] + [Check]

26

ENGLISH

PrPr

Pr

ogramming System Optionsogramming System Options

ogramming System Options

Your cash register's system options programmig feature includes 31 options for the operation of the cash register, receipt printing and management report printing. Each of the functions described in this section is already set upon delivery of the cash register to meet the most frequent requirements. The cash register's factory default settings, which you can reprogram at any time, are indicated in bold print in the table below.

Machine Settings Condition

1 0 = Grand Total will not reset after Z financial report

1 = Grand Total will reset after Z financial report

2 0 = Subtotal will print when the "#/ST/NS" key is pressed

1 = Subtotal will not print when the "#/ST/NS" key is pressed

3 0 = Amount tender is not compulsory

1 = Amount tender is compulsory

4 0 = Date setting in the "month - day - year" format

1 = Date setting in the "day - month - year" format

5 0 = Z1 and Z2 counter will not reset after a Z report

1 = Z1 and Z2 counter will reset after a Z report

6 0 = VAT amount is printed on the receipt

1 = VAT amount is not printed on the receipt

7 0 = Zero skip on financial report

1 = Non-skip on financial report

8 0 = Date will print

1 = Date will not print

9 0 = Time will print

1 = Time will not print

You can proceed in the same way the change the convert caption

printed when the Local base currency is programmed. In this case the only difference is that you need to type [42] in step 2 and the caption "EURO" appears on the operator display; you can then program whatever caption you wish as long as it is up to 10 characters long.

Similarly, you can change the default Convert Total caption "CNV.NET" which indicates a net sales total as converted and which is printed on the financial and management reports. In this case proceed in the same was as explained above, the only difference being is that you need to type [43] in step 2 and the caption "CONV.NET" appears on the operator display.

CrCr

Cr

edit 1,edit 1,

edit 1,

Cr Cr

Cr

edit 2 Caedit 2 Ca

edit 2 Ca

ptions Prptions Pr

ptions Pr

ogrammingogramming

ogramming

With reference to the Programming System Options section in this manual, you can set Machine Condition 16 so that the cash register reserves department 19 or 20, or both, for the registration of credits deriving from sales transactions. By means of this function, you can assign Credit 1 to the transactions paid with one type of credit card and Credit 2 to those paid with another. In this way you can sort the sales that have been paid with two different credit cards. The related Credit 1 (referring to the credits registered in Department 20) and Credit 2 (referring to the credits registered in Department 19) captions can be personalized according to your needs or according to the related credit card. Proceed as follows to do so:

1. Turn the PRG key to the PRG position.

2. Type [2] followed by the [number] of the credit (1 or 2) whose

caption you wish to personalize.

3. Press the [Return] key. The message "CRED n NAME" is

displayed where n represents the credit number.

4. Define a [new caption] of up to 12 characters by using either the

Character Code Table found in the Appendix or by typing it directly on the alphanumeric keypad. Remember that you can use the [Void] key as backspace function during caption entry.

5. Press the [Check] key.

27

ENGLISH

Machine Settings Condition

20 0 = Not mandatory to input clerk number at each transaction

1 = Clerk number must be entered at each transaction 21 Reserved 22 Reserved 23 0 = Addition and subtraction +% result to the department

1 = No addition nor subtraction

+% result to the department

24 0 = VAT amounts are separately printed on receipt

1 = Only total VAT amount is printed on receipt 25 0 = Duplicate Z report active

1 = Duplicate Z report inactive 26 0 = Consecutive # reset after Z1 report

1 = Consecutive # not reset after Z1 report 27 0 = 0 price registration allowed

1 = 0 price registration not be allowed 28 0 = Euro convert function allowed

1 = Euro convert function not allowed 29 0 = VAT rate not printed on financial report in VAT mode

1 = VAT rate printed on financial report in VAT mode 30 0 = Prints converted total at convert tender

1 = Prints converted total at every tender 31 0 = Local base currency

1 = Euro base currency NOTE: Machine conditions 17, 21 and 22 are not available.

Machine Settings Condition

10 0 = Consecutive # will print

1 = Consecutive # will not print

11 0 = Clerk name will print

1 = Clerk name will not print

12 0 = Clerk system inactive

1 = Clerk system active

13 0 = Reserved

1 = Reserved 2 = VAT calculation

14 0 = Z1/Z2 counter will print

1 = Z1/Z2 counter will not print

15 0 = VAT amount will be printed after tender amount

(sales receipt)

1 = VAT amount will be printed before total amount

(sales receipt)

16 0 = Normal Key Layout

1 = Dept20 used as Credit 1 2 = Dept19 used as Credit 2

3 = Dept20 used as Credit 1 and Dept19 as Credit 2 17 Reserved 18 0 = 24HR indication

1 = 12HR indication 19 0 = Language selection - English

1 = Language selection - Spanish

2 = Language selection - French

3 = Language selection - German

28

ENGLISH

ChangChang

Chang

ing the Cash Reging the Cash Reg

ing the Cash Reg

ister's Standarister's Standar

ister's Standar

d Settingsd Settings

d Settings

Proceed as follows if you wish to change any of the standard machine

settings indicated in the previous table:

1. Turn the PRG key to the PRG position.

2. Type the [number] of the machine condition (1-31 as indicated in

the table) that you wish to alter. Machine conditions 17, 21 and 22 are reserved and cannot be changed.

3. Type the [number] of the required setting.

4. Press the [Void] key. The message "VOID/CORR" is printed with

setting you have just made.

5. Press the [Clear] key to program another feature, otherwise exit the

program mode by turning the PRG key to OFF.

Example: Program the cash register so that the customer receipts and journal record are printed in German instead of in English.

Type/Press:

[19] + [3] + [Void]

PLU PrPLU Pr

PLU Pr

ogramming Dump Reporogramming Dump Repor

ogramming Dump Repor

tt

t

If a large number of PLUs are created (bear in mind that up to 500 PLUs can be programmed), a separate receipt can be printed indicating all the PLUs programmed. Their number, associated price, VAT rate (if applicable), item descriptor and associated department are reported on this receipt, which should be kept in a safe place for future reference.

PrPr

Pr

inting an inting an

inting an

All PLU Dump ReporAll PLU Dump Repor

All PLU Dump Repor

tt

t

Proceed as follows to print a PLU report:

1. Turn the PRG key to the PRG position.

2. Press the [PLU] key to print the list.

3. Turn the PRG key to the OFF position to exit the program mode. Shown below is an example PLU dump report.

Allocated department

Allocated department without identifier

Machine number

Item price and associated V AT

Date

Item identifier

PLU number

Time

Consecutive receipt number

29

ENGLISH

PrPr

Pr

inting a PLU Range Dump Reporinting a PLU Range Dump Repor

inting a PLU Range Dump Repor

tt

t

Proceed as follows to print a PLU range dump report:

1. Turn the PRG key to the PRG position.

2. Define a [Start PLU number] from 001 to 500.

3. Define an [End PLU number] from 001 to 500.

4. Press the [PLU] key.

5. Turn the PRG key to the OFF position to exit the program mode. NOTE: You can interrupt the PLU range dump report printing at any

time by pressing the [Feed] key.

Example: Print a PLU range dump report from PLU number 002 to PLU number 020.

Type/Press:

[002] + [020] + [PLU]

PrPr

Pr

inting a Deparinting a Depar

inting a Depar

tment Range Dump Reportment Range Dump Repor

tment Range Dump Repor

tt

t

Proceed as follows to print a department range dump report:

1. Turn the PRG key to the PRG position.

2. Press [88]

3. Define a [start department number] from 01 to 40.

4. Define an [end department number] from 01 to 40.

5. Press the [Amt Tend/TOTAL] key.

6. Turn the PRG key to the OFF position to exit the program mode. Example: Print a department range dump report from Department

number 01 to Department number 08.

Type/Press:

[8] + [8] + [01] + [08] + [Amt Tend/TOTAL]

OvOv

Ov

erall Prerall Pr

erall Pr

ogramming Dump Reporogramming Dump Repor

ogramming Dump Repor

tt

t

After programming your cash register to best suit the needs of your business, you can print a tape record providing information on how the cash register is programmed.

PrPr

Pr

inting the Printing the Pr

inting the Pr

ogramming Dump Reporogramming Dump Repor

ogramming Dump Repor

tt

t

Proceed as follows to print the program tape:

1. Turn the PRG key to the PRG position.

2. Type [999999] and press the [Amt Tend/TOTAL] key.

3. Turn the PRG key to the OFF position to exit the program mode.

On the next page you will find an example of the cash register's overall programming dump report.

30

ENGLISH

Shown below is an example printout of how your cash register is

programmed.

PrPr

Pr

ogramming Manager Pogramming Manager P

ogramming Manager P

asswassw

assw

oror

or

dsds

ds

You can define two individual manager passwords to prevent unauthorized access to the machine's programming mode (PRG), Z mode and X mode. One manager password grants access to the PRG and Z modes, while another grants access to the X mode.

DefDef

Def

ining a PRG and Z Mode Manager Pining a PRG and Z Mode Manager P

ining a PRG and Z Mode Manager P

asswassw

assw

oror

or

dd

d

Proceed as follows to define a manager password that grants access to the PRG and Z modes:

1. Turn the PRG key to the PRG position.

2. Type [111111 ] and press the [Amt Tend/TOTAL] key. The message

"PRG/Z PASS" appears on the operator display.

3. Type your 4-digit manager password and then press the [Non Tax]

key. Remember that only digits are accepted.

NOTE: If you define a manager password of 0000, the password

security protection feature will not work.

Example: Define manager password 9876 for the PRG and Z modes. Type/Press:

[111111] + [Amt Tend/TOTAL] + [9876] + [Non Tax]

DefDef

Def

ining an X Mode Manager Pining an X Mode Manager P

ining an X Mode Manager P

asswassw

assw

oror

or

dd

d

Proceed as follows to define a manager password that grants access to the X mode:

1. Turn the PRG key to the PRG position.

2. Type [222222] and press the [Amt Tend/TOTAL] key. The

message "X PASS" appears on the operator display.

3. Type your 4-digit manager password and then press the [Non Tax]

key. Remember that only digits are accepted.

NOTE: If you define a manager password of 0000, the password

security protection feature will not work.

Price linked to DEPT 2 with VAT rate

Name assigned to DEPT 1

Name assigned to DEPT 2

Consecutive receipt number

HDLO, minus key

Price linked to DEPT 1 with VAT rate

Department status

Time

Euro exchange rate

Date

Machine number

Percent plus rate

Discount rate Fraction

rounding

VA T r ate 1, 2, 3 and 4

System options programming condition

31

ENGLISH

TT

T

ransaction Examplesransaction Examples

ransaction Examples

This section provides examples on how to complete different types of transactions. Sample receipts are included which reflect some of the programming examples used in the chapter entitled Cash Register Programming.

EnterEnter

Enter

ing the Reging the Reg

ing the Reg

ister Modeister Mode

ister Mode

The cash register has two register modes which can be used to record ordinary sales transactions. These two modes are called REG 1 and REG 2, where the only difference between the two is that in the REG 1 mode the cash register will automatically print the programmed header on all customer receipts and journal records, while in the REG 2 mode this header is not printed at all.

Proceed as follows to enter the register mode, assuming that you wish to have the cash register print the programmed header:

1. Insert the control key into the Control Lock and turn it to the REG 1

position.

2. If the Clerk System option was set to active as explained in the

section entitled Clerk Numbers, Secret Codes and Names, enter the related Clerk number assigned and its associated three-digit secret code. If the Clerk System option was set to active and a secret code was not programmed, type any Clerk number [1-15], the default secret code [000] and then press the [Clerk] key.

Example: Define manager password 7654 for the X mode. Type/Press:

[222222] + [Amt Tend/TOTAL] + [7654] + [Non Tax]

Using the Cash RegUsing the Cash Reg

Using the Cash Reg

ister in a Pister in a P

ister in a P

asswassw

assw

oror

or

d Prd Pr

d Pr

otectedotected

otected

ModeMode

Mode

If a manager password was defined to protect unauthorized access to the PRG, Z and X machine modes, proceed as follows to enter the specific passwords so that you can work normally in these modes:

1. Turn the PRG key to the PRG, X or Z position.

2. Type the specific 4-digit password that grants you access to the

required mode.

3. Press the [Check] key. NOTE: If you attempt to use a protected machine mode without typing

the correct password, the cash register emits an error signal and the message "SEC CODE" appears on the operator display.

32

ENGLISH

StandarStandar

Standar

d d

d

TT

T

ransactions in Local Base Currransactions in Local Base Curr

ransactions in Local Base Curr

encenc

enc

yy

y

RegReg

Reg

isterister

ister

ing a Single Item Sale with Change ing a Single Item Sale with Change

ing a Single Item Sale with Change

TT

T

enderender

ender

Up to seven digits can be used for the amount of the entry.

Example: Register a £1.00 item in Department 1 (programmed at a

5.5% fixed VAT rate). Subtotal the transaction and compute change for £5.00.

Proceed as follows:

1. Type [100] and press the [Department 1/21] key.

2. Type the amount tendered [500] and press the [Amt Tend/TOTAL]

key. The transaction is ended and the change due to the customer is displayed.

Exiting the RegExiting the Reg

Exiting the Reg

ister Modeister Mode

ister Mode

To exit the register mode at the end of a transaction, simply turn the

control key to the OFF position.

ClearClear

Clear

ing Erring Err

ing Err

oror

or

ss

s

Detailed instructions on how to clear all kinds of errors which may occur during cash register operations are explained in the section entitled Error Conditions at the beginning of this manual.

Sample ReceiptSample Receipt

Sample Receipt

The following sample receipt shows where general transaction information is printed on a customer receipt.

Customer receipt header on 5 lines with max. 24 characters per line

Machine number Item price with

department VA T rate

T otal balance due

Change due

Item price in nontaxable department

Time

Date

Clerk name and number

Departments

Cash tendered

Consecutive receipt number

T otal balance due in converted currency

Change due in converted currency

VAT totals

Change on a cash tender

Change in converted currency (Euro)

33

ENGLISH

RegReg

Reg

isterister

ister

ing a Multiple Item Sale with Exact Cashing a Multiple Item Sale with Exact Cash

ing a Multiple Item Sale with Exact Cash

TT

T

ender in Local Currender in Local Curr

ender in Local Curr

encenc

enc

yy

y

Example: Register a £2.50 item to Department 1, a £.50 item to Department 5 and a £1.65 item to Department 8, with an exact tender of £4.65.

Proceed as follows:

1. Type [250] and press the [Department 1/21] key.

2. Type [50] and press the [Department 5/25] key.

3. Type [165] and press the [Department 8/28] key.

4. Press the [Subtotal w/Tax] key to display the current balance due.

5. Press the [Amt Tend/TOTAL] key to end the transaction.

RegReg

Reg

isterister

ister

ing a Multiple Item Sale with Exact Cashing a Multiple Item Sale with Exact Cash

ing a Multiple Item Sale with Exact Cash

TT

T

ender in Eurender in Eur

ender in Eur

oo

o

Example: Register a £10.00 item to Department 1, a £20.00 item to Department 2, with an exact tender of 44.38e.

Proceed as follows:

1. Type [1000] and press the [Department 1/21] key.

2. Type [2000] and press the [Department 2/22] key.

3. Press the [Subtotal w/Tax] key to display the current balance due

in Local currency.

4. Press the [Euro] key to display the current balance due in Euro.

5. Press the [Amt Tend/TOTAL] key to end the transaction.

T ransaction total in local and converted currency

Exact cash tender in local currency

T ransaction total in local and converted currency

Exact cash tender in converted currency (Euro)

34

ENGLISH

RegReg

Reg

isterister

ister

ing a Sale of Multiple Items aing a Sale of Multiple Items a

ing a Sale of Multiple Items a

t Same Costt Same Cost

t Same Cost

Up to three digits can be used for the quantity multiplied.

Example: Multiply two items costing £1.50 and register the sale to Department 1. Compute change for £5.00.

Proceed as follows:

1. Type the number of items [2] and press the [Qty/Date] key.

2. Type their cost [150] and press the [Department 1/21] key.

3. Press the [Subtotal w/Tax] key to display the current balance due.

4. Type the amount tendered [500] and press the [Amt Tend/TOTAL]

key. The transaction is ended and the change due to the customer is displayed.

RegReg

Reg

isterister

ister

ing a Multiple Deparing a Multiple Depar

ing a Multiple Depar

tment Sale with Ptment Sale with P

tment Sale with P

aymentayment

ayment

and Change and Change

and Change

TT

T

enderender

ender

Example: Register a £69.99 item to Department 1 (programmed at a

5.5% VAT rate), a £5.99 item to Department 4 (programmed at a 20% VAT rate) and a £3.50 item to Department 7 (programmed without VAT). Compute change for £100.00.

Proceed as follows:

1. Type [6999] and press the [Department 1/21] key.

2. Type [599] and press the [Department 4/24] key.

3. Type [350] and press the [Department 7/27] key.

4. Press the [Subtotal w/Tax] key to display the current balance due.

5. Type the amount tendered [10000] and press the [Amt Tend/ TOTAL] key. The transaction is ended and the change due to the customer is displayed.

T otal cost with VAT rate

Number of items at same cost multiplied by unit price

Change tendered

Cash payment

35

ENGLISH

RegReg

Reg

isterister

ister

ing a Multiple Deparing a Multiple Depar

ing a Multiple Depar

tment Sale with Ptment Sale with P

tment Sale with P

aymentayment

ayment

in Eurin Eur

in Eur

o and Change o and Change

o and Change

TT

T

ender in Local Currender in Local Curr

ender in Local Curr

encenc

enc

yy

y

Example: Register a £69.99 item to Department 1 (programmed at a

5.5% VAT rate), a £5.99 item to Department 4 (programmed at a 20% VAT rate) and a £3.50 item to Department 7 (programmed without VAT). Compute change for 150.00e.

Proceed as follows:

1. Type [6999] and press the [Department 1/21] key.

2. Type [599] and press the [Department 4/24] key.

3. Type [350] and press the [Department 7/27] key.

4. Press the [Subtotal w/Tax] key to display the current balance due

in Local currency.

5. Press the [Euro] key to display the current balance due in Euro.

6. Type the amount tendered in Euro [15000] and press the [Amt Tend/TOTAL] key. The transaction is ended and the change due to the customer is displayed.

RegReg

Reg

isterister

ister

ing a Charing a Char

ing a Char

ge ge

ge

TT

T

ransactionransaction

ransaction

Charge transactions are counted and registered to the charge total in

the financial report. Example: Register a £2.50 item to Department 1 and a £3.00 item to

Department 2 as a charge transaction. Use the [#/ST/NS] key to print the sub total on the sales receipt.

Proceed as follows:

1. Type [250] and press the [Department 1/21] key.

2. Type [300] and press the [Department 2/22] key.

3. Press the [#/ST/NS] key to print the current balance due.

4. Press the [Charge] key to end the transaction.

Cash payment in Euro

Change tendered in local currency

Amount charged

36

ENGLISH

Split Cash/CharSplit Cash/Char

Split Cash/Char

ge ge

ge

TT

T

enderender

ender

ing in Local Curring in Local Curr

ing in Local Curr

encenc

enc

yy

y

Example: Register a £10.00 item and a £15.00 item to Department 2. Split the amount tendered between £20.00 cash and £5.00 charge in Local currency .

Proceed as follows:

1. Type [1000] and press the [Department 2/22] key.

2. Type [1500] and press the [Department 2/22] key.

3. Press the [Subtotal w/Tax] key to display the current balance due in Local currency.

4. Type the cash tendered [2000] and press the [Amt Tend/TOTAL] key. The remaining balance due (5.00) is displayed.

5. Press the [Charge] key to end the transaction.

Split Cash/CharSplit Cash/Char

Split Cash/Char

ge ge

ge

TT

T

enderender

ender

ing in Euring in Eur

ing in Eur

oo

o

Example: Register a £8.00 item and a £12.00 item to Department 3. Split the amount tendered between 10.00e cash and 19.59e charge.

Proceed as follows:

1. Type [800] and press the [Department 3/23] key.

2. Type [1200] and press the [Department 3/23] key.

3. Press the [Subtotal w/Tax] key to display the current balance due

in Local currency.

4. Press the [Euro] key to display the current balance due in Euro.

5. Type the cash tendered in euro [1000] and press the [Amt Tend/TOTAL] key. The remaining balance due in Local currency is displayed.

6. Press the [Euro] key again. The remaining balance due in Euro (19.59) is displayed.

7. Press the [Charge] key to end the transaction.

Sales total in local and converted currency

Charge payment in Euro

Cash payment in Euro

Sales total in local and converted currency

Cash payment Charge payment

37

ENGLISH

ChecChec

Chec

k k

k

TT

T

enderender

ender

inging

ing

Example: Register a £70.00 item paid by check to Department 24.

Proceed as follows:

1. Type [7000] and press the [Dept Shift] and [Department 4/24]

keys.

2. Press the [Check] key and the transaction ends successfully.

ChecChec

Chec

k k

k

TT

T

ender with Change in Local Currender with Change in Local Curr

ender with Change in Local Curr

encenc

enc

yy

y

Example: Register a £19.50 item to Department 4, a £2.50 item to Department 5 and a £5.00 item to Department 24. Compute the change in Local currency for a £30.00 check tender.

Proceed as follows:

1. Type [1950] and press the [Department 4/24] key.

2. Type [250] and press the [Department 5/25] key.

3. Type [500] and press the [Dept Shift] and [Department 4/24] keys.

4. Press the [#/ST/NS] key to print the current balance due.

5. Type the amount paid by check [3000] and press the [Check] key. The change due to the customer is displayed and the transaction ends successfully.

Check payment

T ransaction subtotal

Check payment

Change tendered

38

ENGLISH

ChecChec

Chec

k k

k

TT

T

ender in Eurender in Eur

ender in Eur

o with Change in Local Curro with Change in Local Curr

o with Change in Local Curr

encenc

enc

yy

y

Example: Register a £19.50 item to Department 4, a £2.50 item to Department 5 and a £5.00 item to Department 24. Compute the change in Local currency for a 40.00e check tender.

Proceed as follows:

1. Type [1950] and press the [Department 4/24] key.

2. Type [250] and press the [Department 5/25] key.

3. Type [500] and press the [Dept Shift] and [Department 4/24] keys.

4. Press the [#/ST/NS] key to print the current balance due in Local

currency.

5. Press the [Euro] key to display the current balance due in Euro.

6. Type the amount tendered by check in Euro [4000] and press the [Check] key. The change due in local currency is displayed and the transaction ends successfully.

Split ChecSplit Chec

Split Chec

k/Cash k/Cash

k/Cash

TT

T

ender in Local Currender in Local Curr

ender in Local Curr

encenc

enc

yy

y

Example: Register a £24.00 item to Department 1, a £36.00 item to Department 3 and a £4.00 item to Department 4. Split the tender between £60.00 check and £4.00 cash.

Proceed as follows:

1. Type [2400] and press the [Department 1/21] key.

2. Type [3600] and press the [Department 3/23] key.

3. Type [400] and press the [Department 4/24] key.

4. Press the [Subtotal w/Tax] key to display the current balance due.

5. Type the amount to be tendered by check [6000] and then press the [Check] key. The remaining balance due is displayed.

6. Press the [Amt Tend/TOTAL] key when the corresponding cash is tendered. The transaction ends successfully.

Change tendered in local currency

Check payment in Euro

Sales total in local and converted currency

Cash payment

Check payment

VAT totals

39

ENGLISH

Split ChecSplit Chec

Split Chec

k k

k

TT

T

ender in Local Currender in Local Curr

ender in Local Curr

encenc

enc

y/Cash y/Cash

y/Cash

TT

T

enderender

ender

in Eurin Eur

in Eur

oo

o

Example: Register a £18.00 item to Department 2, a £24.00 item to Department 3 and a £2.50 item to Department 4. Split the tender between a £20.00 check and 36.24e cash.

Proceed as follows:

1. Type [1800] and press the [Department 2/22] key.

2. Type [2400] and press the [Department 3/23] key.

3. Type [250] and press the [Department 4/24] key.

4. Type the amount to be tendered by check in local [2000] and then press the [Check] key. The remaining balance due is displayed in Local currency.

5. Press the [Euro] key to display the remaining balance due in Euro.

6. Press the [Amt Tend/TOTAL] key when the corresponding cash is

tendered in euro. The transaction ends successfully.

Examples of Examples of

Examples of

TT

T

ransactions in Eurransactions in Eur

ransactions in Eur

o Base Curro Base Curr

o Base Curr

encenc

enc

yy

y

This section provides a few transaction examples performed with a Euro base currency. By default the machine is programmed with a Local base currency. In order to program the machine for a Euro base currency, set Machine Condition 31 to the value 1 as indicated in the section entitled "Changing the Cash Register's Standard Settings".

When the base currency is set to Local, the converted amount is in Euro while when the base currency is set to Euro, the converted amount is in Local.

Cash payment in Euro

Check payment in local currency

40

ENGLISH

RegReg

Reg

isterister

ister

ing a Single Item Sale with Change ing a Single Item Sale with Change

ing a Single Item Sale with Change

TT

T

enderender

ender

Up to six digits can be used for the amount of the entry.

Example: Register a 5.00e item in Department 3 (programmed at a 15% fixed VAT rate). Compute change for 10.00e.

Proceed as follows:

1. Type [500] and press the [Department 3/23] key.

2. Type the amount tendered [1000] and press the [Amt Tend/ TOTAL] key. The transaction is ended and the change due to the customer is displayed.

RegReg

Reg

isterister

ister

ing a Multiple Item Sale with Exact Cashing a Multiple Item Sale with Exact Cash

ing a Multiple Item Sale with Exact Cash

TT

T

enderender

ender

Example: Register a 5.50e item to Department 1, a 1.00e item to Department 5 and a 2.00e item to Department 8, print the subtotal and accept an exact tender of 8.50e.

Proceed as follows:

1. Type [550] and press the [Department 1/21] key.

2. Type [100] and press the [Department 5/25] key.

3. Type [200] and press the [Department 8/28] key.

4. Press the [#/ST/NS] key to display and print the current balance

due.

5. Press the [Amt Tend/TOTAL] key to end the transaction.

Department sales

Exact cash payment in Euro

Euro caption indicating machine is programmed in Euro base currency

Cash payment in Euro

Sales total in Euro and in converted local currency

Change tendered in Euro

41

ENGLISH

RegReg

Reg

isterister

ister

ing a Multiple Deparing a Multiple Depar

ing a Multiple Depar

tment Sale with Ptment Sale with P

tment Sale with P

aymentayment

ayment

in Local Currin Local Curr

in Local Curr

encenc

enc

y and Change y and Change

y and Change

TT

T

ender in Eurender in Eur

ender in Eur

oo

o

Example: Register a 70.00e item to Department 1 (programmed at a

5.5% VAT rate), a 6.00e item to Department 4 (programmed at a 20%

VAT rate) and a 4.00e item to Department 7 (programmed without VAT). Compute change for a £100.00 tender.

Proceed as follows:

1. Type [7000] and press the [Department 1/21] key.

2. Type [600] and press the [Department 4/24] key.

3. Type [400] and press the [Department 7/27] key.

4. Press the [Subtotal w/Tax] key to display the current balance due in Euro.

5. Press the [Euro] key to display the current balance due in Local currency.

6. Type the amount tendered in Local [10000] and press the [Amt Tend/TOTAL] key. The transaction is ended and the change in Euro due to the customer is displayed.

Sales total in Euro and in converted local currency

Cash payment in local currency

Change tendered in Euro

42

ENGLISH

ChecChec

Chec

k k

k

TT

T

ender in Local Currender in Local Curr

ender in Local Curr

encenc

enc

y with Change in Eury with Change in Eur

y with Change in Eur

oo

o

Example: Register a 19.50e item to Department 4, a 2.50e item to Department 5 and a 5.00e item to Department 24. Compute the change in Local currency for a £20.00 check tender.

Proceed as follows:

1. Type [1950] and press the [Department 4/24] key.

2. Type [250] and press the [Department 5/25] key.

3. Type [500] and press the [Dept Shift] and [Department 4/24] keys.

4. Press the [#/ST/NS] key to print the current balance due in Euro.

5. Press the [Euro] key to display the current balance due in Local

currency.

6. Type the amount tendered by check in Local currency [2000] and press the [Check] key. The change due in Euro currency is displayed and the transaction ends successfully.

Split Split

Split

TT

T

ender with Cash in Local Currender with Cash in Local Curr

ender with Cash in Local Curr

encenc

enc

y/Checy/Chec

y/Chec

k ink in

k in

EurEur

Eur

o with Changeo with Change

o with Change

Example: Register a 10.00e item to Department 1 and a 25.00e item to Department 2. Display the subtotal, accept a split tender consisting of £15.00 cash in Local currency and a 40.00e check in Euro, then tender change in Euro.

Proceed as follows:

1. Type [1000] and press the [Department 1/21] key.

2. Type [2500] and press the [Department 2/22] key. 3 Press the [Subtotal w/Tax] key to display the amount due in Euro.

4. Press the [Euro] key to display the current balance due in Local

currency.

5. Type the amount tendered by cash in Local currency [1500] and press the [Amt Tend/TOTAL] key. The current balance due in Euro is displayed.

Check payment in local currency

Change tendered in Euro

43

ENGLISH

6. Type [4000] and press the [Check] key. The change in Euro is

displayed and the transaction ends successfully.

Minus (-) KMinus (-) K

Minus (-) K

ee

e

y y

y

TT

T

ransactionsransactions

ransactions

RegReg

Reg

isterister

ister

ing a (-) Reduction (Coupon)ing a (-) Reduction (Coupon)

ing a (-) Reduction (Coupon)

Up to 6 digits can be used for the amount of the transaction.

Example: Register a £.10 reduction (coupon) on a £2.00 item to Department 2.

Proceed as follows:

1. Type [200] followed by the [Department 2/22] key.

2. Type the amount to be reduced [10] followed by the [-] key.

3. End the transaction by pressing the [Amt Tend/TOTAL] key.

Check payment in Euro

Change tendered in Euro

Cash payment in local currency

Item price Reduction using manual

entry and minus key

Exact cash tender

44

ENGLISH

RegReg

Reg

isterister

ister

ing a Multiple (-) Reductioning a Multiple (-) Reduction

ing a Multiple (-) Reduction

Example: Register a £.12 reduction on a £2.50 item to Department 1, a £2.60 item to Department 3, a £.60 reduction on a £4.50 item to Department 21, a £.10 discount to a £3.00 multiple item sale to Department 5 and a £.1.00 reduction to a £5.00 item to Department 22. Compute change for a £30.00 tender.

Proceed as follows:

1. Type [250] and press the [Department 1/21] key.

2. Type the £.12 discount [12] and press the [-] key.

3. Type [260] and press the [Department 3/23] key.

4. Type [450] and press the [Dept Shift] and [Department 1/21] keys.

5. Type the £.60 discount [60] and press the [-] key.

6. Type the number of items of the multiple sale [3], press the

[Qty/Date] key then enter the unit price [300] and press the [Department 5/25] key.

7. Type the number of items of the multiple sale to be discounted by

pressing the [3] key followed by [Qty/Date] key and then type the £.10 discount [10] followed by the [-] key.

8. Type [500], press the [Dept. Shift] key followed by the [Department 2/22] key.

9. Type the £1.00 reduction [100] and press the [-] key.

10.Press the [Subtotal w/Tax] key to display the current balance due.

11.Type the amount tendered [3000] and press the [Amt Tend/TOTAL] key to display the change due to the customer and end the transaction.

Item price entry Manual reduction entry

Resulting total

Multiple item sale multipled by unit price

Change due

Cash tendered

Calculated VA T rates

Multiple item reduction

Manual reduction entry

Change converted into Euro

45

ENGLISH

PP

P

erer

er

cent Discount (-%) cent Discount (-%)

cent Discount (-%)

TT

T

ransactionsransactions

ransactions

Discounting the Discounting the

Discounting the

TT

T

otal Saleotal Sale

otal Sale

You can call up a programmed discount rate during the transaction by pressing the [-%/RA] key. If a percent discount rate is not programmed, type in the discount rate before pressing the [-%/RA] key. Up to four digits can be used for the discount percentage (0-99.99%). You MUST enter two digits after the decimal position.

Example: Register a programmed 10% discount to an entire sales transaction. Compute the change tender.

Proceed as follows:

1. Type [250] and press the [Department 7/27] key.

2. Type [99] and press the [Department 3/23] key.

3. Press the [#/ST/NS] key to display and print the current balance

due.

4. Press the [-%/RA] key to apply the programmed discount. The

amount discounted is displayed.

5. Press the [Subtotal w/Tax] key to display the new balance due.

6. Type the amount tendered [500] and press the [Amt Tend/TOTAL]

key. The change due to the customer is displayed and the transaction ends successfully.

T ransaction total

T ransaction subtotal

Programmed discount rate Discount

Cash tendered Change due

Change converted into Euro

46

ENGLISH

Discounting the Discounting the

Discounting the

TT

T

otal Sale botal Sale b

otal Sale b

y Using a Randomy Using a Random

y Using a Random

Discount RaDiscount Ra

Discount Ra

tete

te

Example: Register a 20% discount to a sales transaction. Compute the change tender.

Proceed as follows:

1. Type [259] and press the [Department 1/21] key.

2. Type [125] and press the [Department 2/22] key.

3. Press the [Subtotal w/Tax] key to display the current balance due.

4. Type the discount rate to apply [20] and press the [-%/RA] key. The

amount discounted is displayed.

5. Press the [Subtotal w/Tax] key again to display the new balance

due.

6. Type the amount tendered [500] and press the [Amt Tend/TOTAL]

key. The change due to the customer is displayed and the transaction ends successfully.

Discounting (-%) Individual Items using theDiscounting (-%) Individual Items using the

Discounting (-%) Individual Items using the PrPr

PrPr

Pr

ogrammed Discount Raogrammed Discount Ra

ogrammed Discount Ra

tete

te

Up to four digits can be used for the discount percentage (0-99.99).

You MUST enter two digits after the decimal position. Example: Register a programmed 10% discount on a £3.00 item to

Department 5, and a £2.50 item to Department 4. Compute the change tender.

Proceed as follows:

1. Type [300] and press the [Department 5/25] key.

2. Press the [-%/RA] key to apply the programmed discount. The

amount discounted is displayed.

3. Type [250] and press the [Department 4/24] key.

4. Press the [Subtotal w/Tax] key to display the current balance due.

5. Type the amount tendered [600] and press the [Amt Tend/TOTAL]

key. The change due to the customer is displayed and the transaction ends successfully.

T ransaction subtotal

Discount

Manual discount entry

T ransaction total in local currency and in Euro

Programmed discount rate Discount

47

ENGLISH

Discounting Individual Items using PrDiscounting Individual Items using Pr

Discounting Individual Items using Pr

ogrammed andogrammed and

ogrammed and

Random Discount RaRandom Discount Ra

Random Discount Ra

testes

tes

Example: Register a £2.50 item to Department 1, apply the programmed discount to a £3.50 item to Department 25 and apply a discount rate of 3% to a £5.00 item to Department 2. Compute change tender.

Proceed as follows:

1. Type [250] and press the [Department 1/21] key.

2. Type [350] and press the [Dept Shift] key followed by the

[Department 5/25] key.

3. Press the [-%/RA] key to apply the programmed discount. The

amount discounted is displayed.

4. Type [500] and press the [Department 2/22] key.

5. Type the discount rate [3] and press the [-%/RA] key. The amount

discounted is displayed.

6. Press the [Subtotal w/Tax] key to display the current balance due.

7. Type the cash tendered [1100] and press the [Amt Tend/TOTAL]

key. The change due to the customer is displayed and the tranasction ends successfully.

Programmed discount rate

Random discount rate

48

ENGLISH

Discounting (-%) One Item Using the PrDiscounting (-%) One Item Using the Pr

Discounting (-%) One Item Using the Pr

ogrammedogrammed

ogrammed

Discount RaDiscount Ra

Discount Ra

tete

te

Up to four digits can be used for the discount percentage (0-99.99%). You MUST enter two digits after the decimal position.

Example: Register a programmed 10% discount to a £.99 cash transaction to Department 7.

Proceed as follows:

1. Type [99] and press the [Department 7/27] key.

2. Press the [-%/RA] key to apply the programmed discount. The

amount discounted is displayed.

3. Press the [Subtotal w/Tax] key to display the current balance due.

4. Press the [Amt Tend/TOTAL] key to end the transaction with a

correct cash tender.

PP

P

erer

er

cent Plus (+%) cent Plus (+%)

cent Plus (+%)

TT

T

ransactionsransactions

ransactions

Applying the PrApplying the Pr

Applying the Pr

ogrammed Pogrammed P

ogrammed P

erer

er

cent Plus Racent Plus Ra

cent Plus Ra

te to a te to a

te to a

TT

T

otalotal

otal

SaleSale

Sale

You can call up a programmed percent plus rate during the transaction by pressing the [+%/PO] key. If a percent plus rate is not programmed, type in the discount rate before pressing the [+%/PO] key. Up to four digits can be used for the percent plus rate (0-99.99%). You MUST enter two digits after the decimal position.

Example: Register a programmed 10% percent plus rate to an entire sales transaction. Compute the change tender.

Proceed as follows:

1. Type [250] and press the [Department 7/27] key.

2. Type [99] and press the [Department 3/23] key.

3. Press the [Subtotal w/Tax] key to display the current balance due.

4. Press the [+%/PO] key to apply the programmed add-on. The

amount added on is displayed.

5. Press the [Subtotal w/Tax] key again to display the new balance

due.

Programmed discount rate Discount

49

ENGLISH

6. Type the amount tendered [500] and press the [Amt Tend/TOTAL]

key. The change due to the customer is displayed and the transaction ends successfully.

Applying a Random PApplying a Random P

Applying a Random P

erer

er

cent Plus Racent Plus Ra

cent Plus Ra

te to a te to a

te to a

TT

T

otal Saleotal Sale

otal Sale

Example: Register a 20% percent plus rate to a sales transaction. Compute the change tender.

Proceed as follows:

1. Type [259] and press the [Department 1/21] key.

2. Type [125] and press the [Department 2/22] key.

3. Press the [Subtotal w/Tax] key to display the current balance due.

4. Type the percent plus rate to apply [20] and press the [+%/PO] key.

The amount added on is displayed.

5. Press the [Subtotal w/Tax] key again to display the new balance

due.

6. Type the amount tendered [500] and press the [Amt Tend/TOTAL]

key. The change due to the customer is displayed and the transaction ends successfully.

Amount added on

T ransaction subtotal Programmed percent plus rate

Amount added on

Random percent plus rate

T ransaction subtotal

50

ENGLISH

Applying PrApplying Pr

Applying Pr

ogrammed and Random Pogrammed and Random P

ogrammed and Random P

erer

er

cent Pluscent Plus

cent Plus

RaRa

Ra

tes to Individual Itemstes to Individual Items

tes to Individual Items

Example: Register a £2.50 item to Department 1, apply the programmed percent plus rate to a £3.50 item to Department 25, and apply a random precent plus rate of 5% to a £5.00 item to Department 2. Compute change tender.

Proceed as follows:

1. Type [250] and press the [Department 1/21] key.

2. Type [350] and press the [Dept Shift] key followed by the

[Department 5/25] key.

3. Press the [+%/PO] key to apply the programmed percent plus rate.

The amount added on is displayed.

4. Type [500] and press the [Department 2/22] key.

5. Type the random percent plus rate [5] and press the [+%/PO] key.

The amount added on is displayed.

6. Press the [Subtotal w/Tax] key to display the current balance due.

Adding a PAdding a P

Adding a P

erer

er

cent Plus Racent Plus Ra

cent Plus Ra

te to Individual Items Usingte to Individual Items Using

te to Individual Items Using

the Prthe Pr

the Pr

ogrammeogramme

ogramme

d Rad Ra

d Ra

tete

te

Up to four digits can be used for the percent plus rate (0-99.99%).

You MUST enter two digits after the decimal position. Example: Register a programmed 3% percent plus rate on a £3.00 item

to Department 5, and a £2.50 item to Department 4. Compute the change tender.

Proceed as follows:

1. Type [300] and press the [Department 5/25] key.

2. Press the [+%/PO] key to apply the programmed percent plus rate.

The amount added on is displayed.

3. Type [250] and press the [Department 4/24] key.

4. Press the [Subtotal w/Tax] key to display the current balance due.

5. Type the amount tendered [600] and press the [Amt Tend/TOTAL]

key. The change due to the customer is displayed and the transaction ends successfully.

Amount added on

Programmed percent plus rate

51

ENGLISH

7. Type the cash tendered [1200] and press the [Amt Tend/TOTAL]

key. The change due to the customer is displayed and the tranasction ends successfully.

Adding the PrAdding the Pr

Adding the Pr

ogrammed Pogrammed P

ogrammed P

erer

er

cent Plus Racent Plus Ra

cent Plus Ra

te (+%) tote (+%) to

te (+%) to

One ItemOne Item

One Item

Up to four digits can be used for the percent plus rate (0-99.99%). You MUST enter two digits after the decimal position.

Example: Register a programmed 3% add-on to a £.99 cash transaction to Department 7.

Proceed as follows:

1. Type [99] and press the [Department 7/27] key.

2. Press the [+%/PO] key to apply the programmed percent plus rate.

The amount added on is displayed.

3. Press the [Subtotal w/Tax] key to display the current balance due.

4. Press the [Amt Tend/TOTAL] key to end the transaction with a

correct cash tender.

Programmed percent plus rate

Random percent plus rate

52

ENGLISH

PLU CodesPLU Codes

PLU Codes

RegReg

Reg

isterister

ister

ing a Sales ing a Sales

ing a Sales

TT

T

ransaction Using Prransaction Using Pr

ransaction Using Pr

eset PLUeset PLU

eset PLU

CodesCodes

Codes

In order to be able to use this feature, PLU codes must have been previously set. Turn to the section entitled Setting PLU Codes for information on how to define a PLU to an individual item.

Example: Use preset PLU codes to register an entire transaction: register PLU 1 (preset for Coffee) and multiply 3 PLU 2 (preset for Mineral Water). Compute change for a cash tender.

Proceed as follows:

1. Type [1] followed by the [PLU] key.

2. Type [3] followed by [Qty/Date], then press [2] followed by the

[PLU] key. The amount of the multiplication is displayed.

3. Press the [Subtotal w/Tax] key to display the current balance due.

4. Type the amount tendered [1000] and press the [Amt tend/ TOTAL] key. The change due to the customer is displayed and the transaction is ended successfully.

Programmed PLU identifier

Preset PLU price

Multiple sale with same preset PLU

53

ENGLISH

VV

V

oids and Refundsoids and Refunds

oids and Refunds

VV

V

oiding the Proiding the Pr

oiding the Pr

ee

e

vious Entrvious Entr

vious Entr

y in the Middle of a Saley in the Middle of a Sale

y in the Middle of a Sale

Example: Void a £2.50 entry erroneously made to Department 2. Then register a £3.00 item to this same Department. End the transaction with an exact change tender.

Proceed as follows:

1. Type [250] and press the [Department 2/22] key.

2. Press the [Void] key to void the entry made in the previous step. The amount voided is displayed and printed.

3. Type [300] and press the [Department 2/22] key.

4. Press the [Subtotal w/Tax] key to display the current balance due.

5. Press the [Amt Tend/TOTAL] key to end the transaction with an exact change tender.

OvOv

Ov

erwrerwr

erwr

iting a Priting a Pr

iting a Pr

eset PLU Preset PLU Pr

eset PLU Pr

iceice

ice

Example: Overwrite the preset PLU 1 with £2.00. Compute change for a £5.00 tender.

Proceed as follows:

1. Type the new price [200] and press the [PLU ALT] key.

2. Type [1] followed by the [PLU] key to define the PLU to be

overwritten.

3. Press the [Subtotal w/Tax] key to display the current balance due.

4. Type the cash tendered [500] and press the [Amt Tend/TOTAL]

key. The change due to the customer is displayed and the transaction ends successfully.

Entered PLU price (manual price entry)

Overwritten PLU descriptor

Correct item price

Incorrect item price void

54

ENGLISH

7. Type the amount tendered [1000] and press the [Amt Tend/TOTAL] key. The change due to the customer is

displayed and the transaction is ended successfully.

VV

V

oiding a Proiding a Pr

oiding a Pr

ee

e

vious Entrvious Entr

vious Entr

y ay a

y a

t the End of a Salet the End of a Sale

t the End of a Sale

Example: Register a £1.50 item to Department 1, a £2.59 item to Department 4, a £5.99 item to Department 3. Then void the £1.50 item erroneously made to Department 1 and replace it with a £1.00 entry to the same Department. Compute change for a cash tender.

Proceed as follows:

1. Type [150] and press the [Department 1/21] key.

2. Type [259] and press the [Department 4/24] key.

3. Type [599] and press the [Department 3/23] key.

4. Type [150], press the [Void] key and then the [Department 1/21] key. The amount voided is displayed and printed.

5. Type [100] and press the [Department 1/21] key.

6. Press the [Subtotal w/Tax] key to display the current balance due.

Incorrect price entry

Correct item price entry

Incorrect item price void

55

ENGLISH

Refunding a Single ItemRefunding a Single Item

Refunding a Single Item

Example: Refund a £1.00 item in Department 1.

Proceed as follows:

1. Press the [Return] key.

2. Type the amount to be refunded [100] and press the [Department 1/21] key. The amount refunded is displayed.

3. Press the [Amt Tend/TOTAL] key to successfully end the transac- tion.

Refunding Multiple ItemsRefunding Multiple Items

Refunding Multiple Items

Example: Refund a £4.99 item to Department 4 and three £2.00 items to Department 8.

Proceed as follows:

1. Press the [Return] key.

2. Type [499] and press the [Department 4/24] key. The item's

department number and amount refunded are displayed.

3. Press the [Return] key again.

4. Type the number of items to be refunded [3], press the [Qty/Date] key, enter their unit price [200] and then press their department key [Department 8/28]. The Department number and the number of items refunded are displayed.

5. Press the [Subtotal w/Tax] key to display the total amount to be refunded.

6. Press the [Amt Tend/TOTAL] key to successfully end the transac- tion.

T otal refunded in local currency and in Euro

Single item returned and refunded

Multiple item refund

Single item refund

T otal refund

56

ENGLISH

Other Other

Other

TT

T

ransactionsransactions

ransactions

RegReg

Reg

isterister

ister

ing Moneing Mone

ing Mone

y Receivy Receiv

y Receiv

ed on ed on

ed on

AccountAccount

Account

Example: Register £10.00 received on account.

Proceed as follows:

1. Type [1000] and then press the [-%/RA] key.

The cash drawer will automatically open to indicate the end of the

transaction.

PP

P

aying Moneaying Mone

aying Mone

y Outy Out

y Out

Example: Pay out £2.50.

Proceed as follows:

1. Type the amount to be paid out [250] and then press the [+%/PO]

key.

The cash drawer will automatically open to indicate the end of the

transaction.

Amount received on account

Amount paid out

57

ENGLISH

OvOv

Ov

erwrerwr

erwr

iting a Priting a Pr

iting a Pr

eset eset

eset

VV

V

AA

A

T RaT Ra

T Ra

te on a Departe on a Depar

te on a Depar

tment Saletment Sale

tment Sale

The [Non Tax] key overwrites a preset VAT rate linked to a depart-

ment. Example: Register a £1.15 item to Department 1, with a preset 5.5%

VAT rate, then register a non-taxable £2.50 item to the same Department. Compute the change for a £5.00 cash tender.

Proceed as follows:

1. Type [115] and press the [Department 1/21] key.

2. Press the [Non Tax] key.

3. Type [250] and press the [Department 1/21] key.

4. Press the [Subtotal w/Tax] key to display the current balance due.

5. Type [500] and press the [Amt Tend/TOTAL] key. The change due

to the customer is displayed and the transaction ends successfully.

OvOv

Ov

erwrerwr

erwr

iting the iting the

iting the

VV

V

AA

A

T CalculaT Calcula

T Calcula

tion ation a

tion a

t the End of a Salet the End of a Sale

t the End of a Sale

The [Non Tax] key can also be used to overwrite the final VAT

calculation at the end of a sale. Example: Register a £2.00 item to Department 1 with a preset 5.5%

VAT rate, then register a £2.50 item to Department 2 with a preset 7% VAT rate. Over-ride the VAT calculation and compute the change for a £5.00 cash tender.

Proceed as follows:

1. Type [200] and press the [Department 1/21] key.

2. Type [250] and press the [Department 2/22] key.

3. Press the [Non Tax] key.

4. Type [500] and press the [Amt Tend/TOTAL] key. The change due

to the customer is displayed and the transaction ends successfully.

Department programmed with V A T rate 1

Same department with no V AT applied

Departments with V AT status

No VAT calculation

58

ENGLISH

RegReg

Reg

isterister

ister

ing Sales to the Gallonage Deparing Sales to the Gallonage Depar

ing Sales to the Gallonage Depar

tmenttment

tment

The prerequisite to the example below is the definition of a determined department as Gallonage as explained in the section Linking an HDLO, Tax Status, Single/Multiple Item Cash Sale, Item Price and Description to a Department, in this manual. In the Gallonage department, liquids, oils, etc., are sold at a unit price per gallon or liter.

A department defined for gallonage alone will round-off at three digits after the decimal point according to the High Digit Lock Out setting.

Example: Register the sale of 2 gallons of motor oil at a unit price of £10.00 per gallon to Department 6, which was the department preset for Gallonage products.

Proceed as follows:

1. Type [2] and press the [Qty/Date] key.

2. Type [10000] and press the [Department 6/26] key.

3. Press the [Amt Tend/TOTAL] key for an exact cash tender sale.

CrCr

Cr

edit edit

edit

TT

T

enderender

ender

ss

s

With reference to the Programming System Options section in this manual, you can set Machine Condition 16 so that the cash register reserves departments 19, 20, or both, for the registration of credits deriving from a sales transaction. In this way you can sort the sales that have been paid with two different credit cards.

Prerequisite to the example shown below is having appropriately setting the Machine Condition indicated above as explained in the section entitled Changing the Cash Register's Standard Settings.

Example: Register a £5.00 item to Department 4 and a £1.00 item to Department 5. Assign the resulting credit to Department 20.

Proceed as follows:

1. Type [500] and press the [Department 4/24] key.

2. Type [100] and press the [Department 5/25] key.

3. Press the [Department 20/40] key. The cash register registers the

transaction to Department 20 and the transaction ends successfully.

Sales total in local currency and in Euro

T otal credit assigned

Multiple item sale with same price per gallon

Sales total

59

ENGLISH

RegReg

Reg

isterister

ister

ing an Identifing an Identif

ing an Identif

icaica

ica

tion Number to a tion Number to a

tion Number to a

TT

T

ransactionransaction

ransaction

Up to 7 digits can be used for the identification number. This entry can be made prior to any operation. The identification number is not added to the management report or totals.

Example: Assign the identification number 3456 to a £1.00 sale to Department 4. Enter an exact cash tender sale.

Proceed as follows:

1. Type [3456] and press the [#/ST/NS] key.

2. Type [100] and press the [Department 4/24] key.

3. Press the [Amt Tend/TOTAL] key for an exact cash tender sale.

RegReg

Reg

isterister

ister

ing a No Saleing a No Sale

ing a No Sale

This operation opens the cash drawer and prints a no sale receipt.

The activity is registered to the activity counter in the financial report.

Proceed as follows:

1. Press the [#/ST/NS] key.

T ransaction number

60

ENGLISH

Management ReporManagement Repor

Management Repor

tsts

ts

Transaction data is maintained in the memory of the cash register as long as the battery back-up system is in effect. This data can be printed as a report for management review. The Management Report can be printed from either the X and Z position on the control lock.

X and Z ReporX and Z Repor

X and Z Repor

tsts

ts

Turning the PRG, REG or Z key to the X position prints the accumulated transaction information and RETAINS ALL TOTALS IN MEMORY. Use this report mode to print periodic reading of the transactions performed. X reports include the Cash-In-Drawer, PLU Report, Time Report and X1 and X2 Financial Reports.

Turning the PRG or Z key to the Z position prints the same information as the X reports. The only difference between the two types of report is, however, that after a Z report printout ALL TRANSACTION TOTALS ARE RESET TO ZERO, except for the grand total unless otherwise programmed in the system options programming mode. Z1 and Z2 Financial Reports are provided.

An X1 Report can be printed at any time of the day. This report gives you all the sales transaction totals made before the report is issued. The Grand Total value at the bottom of this report shows the total sales up to the previous day, if a Z1 report was previously taken (this GT does not, however, include the current day’s totals).

A Z1 Report gives the same information as an X1 Report but then resets the transaction totals to zero once printed. It is usually taken at the end of the day so that all the transaction totals are cleared to start from zero the following day. After a Z1 Report, the transaction totals are transferred to the Grand Total (GT) value of the X1 Report. Only when a Z1 Report is taken are the transaction totals transferred to the Z2 or X2 reports.

A Z2 Report is also called a period-to-date financial report which also clears the transaction totals from memory once issued.

This report is usually taken at the end of the month, for example, if a monthly sales report is desired to check the activities of each single department.

An X2 Report gives the same period-to-date financial report as a Z2 Report but does not reset the totals to zero. This report can be taken at any time.

Cash-In-DrawCash-In-Draw

Cash-In-Draw

er Reporer Repor

er Repor

tt

t

The cash-in-drawer report tells you how much cash is in the cash drawer.

Proceed as follows to print a cash-in-drawer report:

1. Turn the control key to the X position.

2. Type the manager password if it has been defined.

3. Press the [Qty/Date] key.

T otal cash in dra wer in local currency

Acronym for Cash In Drawer

61

ENGLISH

Time ReporTime Repor

Time Repor

tt

t

The time report provides the net total sales performed by the cash

register on an hourly basis.

Proceed as follows to print the time report:

1. Turn the control key to the X or Z position (bear in mind that a Z time report printout will reset the totals to zero).

2. Type the manager password if it has been defined.

3. Type [11] and press the [Amt Tend/TOTAL] key.

ClerCler

Cler

k Repork Repor

k Repor

tt

t

The Clerk Report lists the number of transactions and sales totals for each Clerk. At the end of the receipt you are given the sales total of all clerks.

Proceed as follows to print a Clerk Report:

1. Turn the control key to the X or Z position (bear in mind that a Z

Clerk Report resets all totals).

2. Type the manager password if it has been defined.

3. Press the [Clerk] key.

X report identifier

Net sales total at 7:00 PM

Net sales total at 8:00 PM

Receipt number

Time

Activity counter

Time of receipt printout

Clerk name

Activity counter

Sales total of clerk Christina

X report identifier

Sales total of all clerks

Sales total of clerk 3

62

ENGLISH

All PLU ReporAll PLU Repor

All PLU Repor

tt

t

The All PLU Report lists all transaction information pertaining to the use of the PLU codes by all the Clerks on a particular cash register. This report provides the number of times a particular PLU is used and the totals for that number.

Proceed as follows to print a PLU Report.

1. Turn the control key to the X or Z position (bear in mind that a Z

PLU Report resets all PLU totals to zero).

2. Type the manager password if it has been defined.

3. Press the [PLU] key.

PLU Range ReporPLU Range Repor

PLU Range Repor

tt

t

The PLU Range Report lists the transaction information pertaining to a defined range of PLUs. It provides the same information as an All PLU Report, the only difference being that you can define the start PLU and end PLU numbers.

Proceed as follows to print an example PLU Report from PLU 001 to PLU 006.

1. Turn the control key to the X position.

2. Type the manager password if it has been defined.

3. Type [001] to define the start PLU and then type [006] to define the

end PLU.

4. Press the [PLU] key.

Programmed PLU identifier

X report identifier

Number of items sold for PLU min water

PLU min water sales total

All PLUs sales total

63

ENGLISH

DeparDepar

Depar

tment Range Reportment Range Repor

tment Range Repor

tt

t

The Department Range Report lists the transaction information pertaining to a defined range of departments. It provides the total sales transactions performed by the departments within the defined range.

Proceed as follows to print an example Department Range Report starting with Department 01 and ending with Department 06.

1. Turn the control key to the X position.

2. Type the manager password if it has been defined.

3. Type [01] to define the start department followed by [06] to define

the end department.

4. Press the [Amt Tend/TOTAL] key.

Z1 and X1 Financial ReporZ1 and X1 Financial Repor

Z1 and X1 Financial Repor

tt

t

The Z1 and X1 financial report gives the totals of all the transactions performed by the cash register. The only difference between a Z1 and X1 report is that the Z1 report resets all totals to zero, and therefore can be used as an end-of-day report.

Proceed as follows to print a Z1 or X1 financial report:

1. Turn the control key to the Z or X position (bearing in mind that a Z

printout resets all totals to zero).

2. Enter the manager password if it has been defined.

3. Press the [Amt Tend/TOTAL] key. A sample Z1 financial report printout is provided in the next section.

Sample Z1 or X1 Financial ReporSample Z1 or X1 Financial Repor

Sample Z1 or X1 Financial Repor

tt

t

Shown on the next page is an example Z1 financial report. Printing a Z1 report resets all totals to zero.

Department range sales totals

Start department

End department

64

ENGLISH

Z1 report ident.

Time

Paid out counter

Refund counter

Cash sales counter

Void counter

Received on account counter

Department 1 Activity counter

Total amount VAT 1, 2, 3 and 4

Coupon discount total T otal programmed discount

T otal progr ammed percent plus

Refund total

Net sales total in base currency

Void total Gross sales total

Cash sales total Check sales total

Charge sales total Credit 1 sales total Received on account total Paid out total

Cash in drawer total Grand total

Consecutive receipt number

Sales total of all departments

Z1 counter

Department 1 sales total

Z2 and X2 Financial ReporZ2 and X2 Financial Repor

Z2 and X2 Financial Repor

tt

t

A Z2 or X2 period-to-date financial report provides the transaction totals for all 40 departments available, along with the relative VAT totals. Both reports are the same, the only difference being that a Z2 report resets all totals to zero. Can be taken as monthly sales reports to view end-of-month sales totals for each department.

Proceed as follows to print a Z2 or X2 financial report.

1. Turn the control key to the Z or X position (remember that a Z

financial report printout resets all totals to zero).

2. Type the manager password if it has been defined.

3. Type [99] and press the [Amt Tend/TOTAL] key.

An example Z2 financial report is provided on the next page.

Machine number

Gallonage Department sales total

Conversion currency net sales total

Date

Gallonage Department

No sale counter

Credit-1 sales counter

Charge sales counter

Check sales counter

65

ENGLISH

Z2 report ident.

Refund counter

Cash sales counter

Void counter

Department 1 activity counter

T otal amount V AT 1, 2, 3 and 4 Coupon discount total

T otal programmed discount

T otal progr ammed percent plus

Refund total

Net sales total in base currency

Void total Gross sales total Cash sales total

Check sales total Charge sales total Credit 1 sales total Received on account total

Paid out total Cash in drawer total Grand total

Receipt number

Sales total of all departments

Z2 counter

Department 1 sales total

Machine number

Gallonage Department sales total

Conversion currency net sales total

Date

Gallonage Department

Charge sales counter

Check sales counter

DuplicaDuplica

Duplica

te Z Reporte Z Repor

te Z Repor

tt

t

In case the paper runs out or a paper jam occurs during the printing of a Z report, you can print the entire report again from the beginning by following this procedure:

1. Turn the control key to the Z position.

2. Type the manager password if it has been defined.

3. Press [#/ST/NS] followed by the [Amt Tend/TOTAL] key.

Balancing ForBalancing For

Balancing For

mm

m

ulasulas

ulas

The following examples show how totals are calculated for the management reports:

System BalanceSystem Balance

System Balance

(+) Department 1 (+) Department 2 (+) Department 3 : : (+) Department 39 (+) Department 40

(=) Department Total System option 23=0

(+) Department Total (-) Minus Total (-) Sales -% Total (+) Sales +% Total

(=) Net Sales

Time

Paid out counter

Received on account counter

No sale counter

Credit-1 sales counter

66

ENGLISH

System option 23=1 (+) Department Total

(-) Minus Total (-) -% Total (+) +% Total

(=) Net Sales (+) Net sales

(+) Minus Total (+) -% Total (+) Return Total (=) Void Total

(=) Gross Sales (+) Net Sales

(+) Previous Grand Total (=) Ending Grand Total

Media BalanceMedia Balance

Media Balance

(+) Net Sales (-) Check (-) Charge (-) Credit 1 (-) Credit 2 (+) Received on Account (-) Paid Out (-) Payment Out

(=) Cash in Drawer

AppendixAppendix

Appendix

Character Code Character Code

Character Code

TT

T

aa

a

bleble

ble

The Character Code Table shown below indicates all the codes representing the characters which your cash register is capable of printing. You need to use this table when programming Clerk, item, department names, currency descriptors or the header on the customer receipt. Each character code consists of two numbers.

To use this table, first look for the character wanted and then identify its corresponding code by reading the number on the first number column to the left-hand side, identified by 1, and then the second number in the first number row on the top of the table, identified by 2.

For example, the letter R has a character code of 58, the number 5 has a character code of 35 while the Dollar sign has a character code of 72.

67

ENGLISH

Shown below is your cash register's Character Code Table.

CaCa

Ca

ption ption

ption

TT

T

aa

a

bleble

ble

The Caption Table shown on the next pages indicates the information which is printed on the customer receipt and journal record, in the different languages available.

ENGLISH

# DESCRIPTOR DIGITS NOTE

1 COUPON _ _ _ _ 10 Sales Receipt 2 DISCOUNT _ _ _ _ 10 Sales Receipt

3 ADD_ON _ _ _ _ 10 Sales Receipt 4 CHARGE _ _ _ _ 10 Sales Receipt 5 VOID/CORR _ _ 10 Sales Receipt 6 SUBTTL _ _ _ _ 10 Sales Receipt (SUBTOTAL) 7 CHANGE _ _ _ _ 10 Sales Receipt 8 CASH _ _ _ _ _ _ 10 Sales Receipt

9 *PRICE* _ _ _ 10 Sales Receipt 10 AMOUNT _ _ _ _ 10 Sales Receipt 11 CHECK _ _ _ _ 10 Sales Receipt 12 T1 2 Sales Receipt / TAX Symbol 13 T2 2 Sales Receipt / TAX Symbol 14 T3 2 Sales Receipt / TAX Symbol 15 T4 2 Sales Receipt / TAX Symbol 16 REFUND---------------- 24 Sales Receipt 17 TOTAL 10 Sales Receipt 18 PAID_OUT _ _ 10 Receipt 19 RECD_ACCT _ 10 Receipt 20 NO_SALE _ _ _ 10 Receipt 21 COUPON 10 Program Print 22 DISCOUNT _ _ 10 Program Print 23 ADD_ON _ _ _ _ 10 Program Print 24 CHARGE _ _ _ _ 10 Program Print 25 R-A- _ _ _ _ _ _ 10 Program Print 26 P-O- _ _ _ _ _ _ 10 Program Print

DW : Select double width characters.

68

ENGLISH

# DESCRIPTOR DIGITS NOTE

27 VOID/CORR _ 10 Program Print 28 SUBTTL _ _ _ _ 10 Program Print 29 PLU_NO. _ _ _ 10 Program Print 30 T1 2 Program Print / TAX Symbol 31 T2 10 Program Print / TAX Symbol 32 T3 10 Program Print / TAX Symbol 33 T4 10 Program Print / TAX Symbol 34 COUPON _ _ _ _ 10 Financial Report 35 DISCOUNT _ _ 10 Financial Report 36 ADD_ON _ _ _ _ 10 Financial Report 37 CHARGE _ _ _ _ 10 Financial Report 38 VOID/CORR _ 10 Financial Report 39 RECD_ACCT _ 10 Financial Report 40 PAID_OUT _ _ 10 Financial Report 41 NO_SALE _ _ _ 10 Financial Report 42 CHECK _ _ _ _ _ 10 Financial Report 43 DEPTTL _ _ _ _ 10 Financial Report 44 REFUND _ _ _ _ 10 Financial Report 45 TAX_1 _ _ _ _ _ _ 10 Financial Report 46 TAX_2 _ _ _ _ _ _ 10 Financial Report 47 TAX_3 _ _ _ _ _ _ 10 Financial Report 48 TAX_4 _ _ _ _ _ _ 10 Financial Report 49 NET _ _ _ _ 10 Financial Report 50 GROSS 10 Financial Report 51 G T _ _ _ _ 8 Financial Report (GRAND TOTAL) 52 C - I - D 10 Financial Report 53 CASH _ _ _ _ _ 10 Financial Report 54 T1 2 Financial Report / TAX Symbol

# DESCRIPTOR DIGITS NOTE

55 T2 2 Financial Report / TAX Symbol 56 T3 2 Financial Report / TAX Symbol 57 T4 2 Financial Report / TAX Symbol

58 TX 2

Financial Report (CANADIAN TAX) / TAX Symbol

59 TOTAL 10 PLU Report 60 PLU _ _ _ _ 10 PLU Report 61 TOTAL 10 Clerk Report 62 CLERK _ _ _ _ _ 10 Clerk Report 63 C - I - D _ _ 10 Cash in drawer Report 64 NET _ _ _ _ 10 Monthy Report 65 GROSS 10 Monthy Report 66 T 1 _ _ _ _ _ _ 10 Monthy Report 67 T 2 _ _ _ _ _ _ 10 Monthy Report 68 T 3 _ _ _ _ _ _ 10 Monthy Report 69 T 4 _ _ _ _ _ _ 10 Monthy Report 70 MC_#: 5 Machine Number 71 ************************ 24 Store Header 1st line (Programmable) 72 * YOUR RECEIPT * 24 Store Header 2nd line (Programmable) 73 * THANK YOU * 24 Store Header 3rd line (Programmable) 74 ************************ 24 Store Header 4th line (Programmable) 75 DEPT _ _ _ _ 10 Department, All Receipt (Programmable) 76 CLERK _ _ _ _ _ 24 Clerk Name (Programmable) 77 TIME_ _ _ _ _ _ 10 Time Report (Programmable) 78 CREDIT-1 _ _ _ _ 12 Credit-1 Caption (Programmable) 79 CREDIT-2 _ _ _ _ 12 Credit-2 Caption (Programmable) 80 PLU_No _ _ _ _ 10 PLU Caption (Programmable)

* "-" Indicates blank spaces

69

ENGLISH

# SPANISH FRENCH GERMAN

1 COUPON _ _ _ _ COUPON_ _ _ _ MINUS_ _ _ _ _ 2 DESCUENTO REMISE_ _ _ _ RABATT_ _ _ _

3 INCREMENTO MAJORATION AUFSCHLAG_ 4 CARGO_ _ _ _ _ C-CREDIT_ _ KREDIT_ _ _ _ 5 ANUL/CORRC CORRECTION STORNO_ _ _ _ 6 SUBTOTAL_ _ SOUS-TOTAL ZWSUMME_ _ _ 7 CAMBIO_ _ _ RENDU_ _ _ _ _ RUCKGELD_ _ 8 METALICO_ _ ESPECES_ _ _ BAR_ _ _ _ _ _ _

9 "PRECIO"_ _ PRIX_ _ _ _ _ _ PREIS_ _ _ _ _ _ 10 CANTIDAD_ _ MONTANT_ _ _ BETRAG_ _ _ _ 11 CHEQUE_ _ _ _ CHEQUE_ _ _ _ SCHECK_ _ _ _ 12 T1 T1 S1 13 T2 T2 S2 14 T3 T3 S3 15 T4 T4 S4 16 REEMBOLSO-------------- RETOUR-------------------- RUCKZAHLUNG-------17 TOTAL TOTAL GESAMT_ _ _ _ 18 SALIDAS_ _ _ SORTIE_ _ _ _ AUSZAHLUNG 19 CUENTA_ _ _ _ ENTREE_ _ _ _ EINZAHLUNG 20 NO_VENTA NON-VENTE_ NULL_BON_ _ 21 CUPON_ _ _ _ _ COUPON_ _ _ _ MINUS_ _ _ _ _ 22 DESCUENTO_ REMISE_ _ _ _ RABATT_ _ _ _ 23 INCREMENTO MAJORATION AUFSCHLAG_ 24 CARGO_ _ _ _ _ C-CREDIT_ _ KREDIT_ _ _ _ 25 CUENTA_ _ _ _ ENTREE_ _ _ _ EINZAHLUNG 26 SALIDAS_ _ _ SORTIE_ _ _ _ AUSZAHLUNG 27 ANUL/CORRC CORRECTION STORNO_ _ _ _ 28 SUBTOTAL_ _ SOUS-TOTAL ZWSUMME_ _

# SPANISH FRENCH GERMAN

29 PLU_NO_ _ _ _ PLU-NO_ _ _ _ PLU-NR_ _ _ _ 30 T1 T1 S1 31 T2 T2 S2 32 T3 T3 S3 33 T4 T4 S4 34 TL-CUPON_ _ TL-COUPON _ MINUS_ _ _ _ _ 35 DESCUENTO_ TL-REMISE_ RABATT_ _ _ _ 36 TL-INCREM_ TL_MAJOR_ _ AUFSCHLAG_ 37 CARGO_ _ _ _ _ TL-C-DRED_ KREBIT_ _ _ _ 38 ANUL/CORRC TL-CORREC_ STORNO_ _ _ _ 39 CUENTA_ _ _ _ TL-ENTREE_ EINZAHLUNG 40 SALIDAS_ _ _ TL-SORTIE_ AUSZAHLUNG 41 NO_VENTA_ _ TL-NON-VTE NULL-BON_ _ 42 CHEQUE_ _ _ _ TL-CHEQUE_ SCHECK_ _ _ _ 43 TOTAL_DPTO TL-DEPART_ WG_TOTAL_ _ 44 REEMBOLSO_ TL-RETOUR_ RUCKZAHLUNG_ _ 45 T 1_ _ _ _ _ _ TL-TVA1 T 1_ _ _ _ _ _ 46 T 2_ _ _ _ _ _ TL-TVA2 T 2_ _ _ _ _ _ 47 T 3_ _ _ _ _ _ TL-TVA3 T 3_ _ _ _ _ _ 48 T 4_ _ _ _ _ _ TL-TVA4 T 4_ _ _ _ _ _ 49 N E T O_ _ TL-NET_ _ _ _ N E T T O 50 B R U T O TL-BRUT BRUTTO_ _ _ _ 51 GRAN_TOTAL_ _ G T_ _ _ _ _ _ _ G T_ _ _ _ _ _ 52 METAL_CAJA NET-TIROIR G - I - S 53 METALICO_ _ TOT-ESPECE BARGELD_ _ _ 54 T1 T1 S1 55 T2 T2 S2 56 T3 T3 S3

70

ENGLISH

# SPANISH FRENCH GERMAN

57 T4 T4 S4 58 TX TX TX 59 TOTAL TL-PLU_ _ _ _ GESAMT_ _ _ _ 60 P L U_ _ _ P L U_ _ _ _ P L U_ _ _ _ 61 T O T A L TL-VENDEUR GESAMT_ _ _ _ 62 DEPENDIEN_ VENDEUR_ KASSIERER _ _ _ 63 METAL_CAJA NET-TIROIR G - I - S 64 N E T O_ _ TL-NET_ NETTO 65 B R U T O TL-BRUT_ _ _ BRUTTO_ _ _ _ 66 T 1_ _ _ _ _ _ TL-TVA1_ _ _ T 1_ _ _ _ _ _ 67 T 2_ _ _ _ _ _ TL-TVA2_ _ _ T 2_ _ _ _ _ _ 68 T 3_ _ _ _ _ _ TL-TVA3_ _ _ T 3_ _ _ _ _ _ 69 T 4_ _ _ _ _ _ TL-TVA4_ _ _ T 4_ _ _ _ _ _ 70 MC# CR-NO MC# 71 ************************** ****************************** ***************************

72 ******SU RECIBO****** *****VOUS REMERCIE**** ***IHRE RECHNUNG*** 73 ********GRACIAS******* *DE VOTRE CONFIANCE* *****VIELEN DANK*****

74 ************************** ****************************** *************************** 75 DPTO_ _ _ _ DEPT_ _ _ _ WARENGRP_ _ _ 76 DEPENDIENTE_ _ _ _ VENDEUR_ _ _ _ _ _ _ KASSIERER _ _ _ _ 77 HORA_ _ _ _ _ _ HEURE_ _ _ ZEIT_ _ _ _ _ _ 78 CRED-1_ _ _ CART_CRED_1 KRED-1 79 CRED-2_ _ _ CART_CRED_2 KRED-2 80 P L U_No _ _ _ ARTICLE_ _ _ _ ARTIKEL_ _ _ _

TT

T

otalizerotalizer

otalizer

s and Counters and Counter

s and Counter

s s

s

TT

T

aa

a

bleble

ble

The table below indicates the Z1/X1 and Z2/X2 totalizers and

counters for the different cash register features.

Z 1 / X 1 Z 2 / X 2

TOTALIZERES COUNTERS TOTALIZERS COUNTERS

Department 1-40 10 (digits) X 40 4 (digits) X 40 10 (digits) X 40 4 (digits) X 40 Clerk 1-15 10 X 15 4 X 15 - -

TAX amount 10 X 4 - 10 X 4 Minus 10 X 1 - 10 X 1 -

-% 10 X 1 - 10 X 1 +% 10 X 1 - 10 X 1 Return 10 X 1 4 X 1 10 X 1 4 X 1 Void 10 X 1 4 X 1 10 X 1 4 X 1 Received account 10 X 1 4 X 1 10 X 1 4 X 1 Paid out 10 X 1 4 X 1 10 X 1 4 X 1 Cash 10 X 1 4 X 1 10 X 1 4 X 1 Charge 10 X 1 4 X 1 10 X 1 4 X 1 Check 10 X 1 4 X 1 10 X 1 4 X 1 Cash in drawer 10 X 1 - 10 X 1 NO sale - 4 X 1 - 4 X 1 Grand Total 12 X 1 - - Net sales 10 X 1 - 10 X 1 Convert net sales 10 X 1 - 10 X 1 Gross sales 10 X 1 - 10 X 1 PLU 10 X 500 4 X 500 - Z1 Counter - 4 X 1 - Z2 Counter - - - 4 X 1 Time sales 4 X 24 4 X 24 - -

* "-" Indicates blank spaces

71

ENGLISH

Cash RegCash Reg

Cash Reg

ister Specifister Specif

ister Specif

icaica

ica

tions and Safetytions and Safety

tions and Safety

TT

T

echnical Characterechnical Character

echnical Character

isticsistics

istics

Listed below are the technical characteristics of this cash register

model. Type: Electronic cash register with alphanumeric printer

and 40 departments and 500 PLU settings

Displays: 10-digit green fluorescent displays.

Symbols for error, change, subtotal, minus, total, journal paper low, cash, check, charge, Euro currency

shown. Capacity: 6-digit input and 10-digit printout Printer: Shuttle dot-matrix, 24 characters per line Inked ribbon: Nylon fabric ribbon cartridge Paper supply: 2 1/4" (57 mm) single or dual-ply paper tape Batteries: Four standard "AA" batteries which safeguard

memory contents in the event of power failures. Technology: CMOS RAM Power cons.: Standby - 5.3 W, Operating 28 W Operating

Temperature: 0 degrees C - 40 degrees C (32-104 degrees F) Dimensions: 430 mm x 410 mm x 320 mm Weight: 8.5 Kg

Safety PrSafety Pr

Safety Pr

ecautionsecautions

ecautions

• The power socket for this cash register must be located near the unit and easily accessible.

• Do not use this cash register outdoors in the rain or near any liquid.

Olivetti ECR 2400, ECR 2400 euro Instructions Manual

Specifications and Main Features

Frequently Asked Questions

User Manual