Nokia 2126 User Manual [en, es]

User Guide

Manual del Usuario

Nokia 2126 User Guide

Issue 1

Nota: La traducción en español de este manual inicia en la Página 75.

931169X26

LEGAL INFORMATION

Part No. 9242801, Issue No. 2 Copyright ©2006 Nokia. All rights reserved. Nokia, Nokia Connecting People, Nokia 2126, Xpress-on, Pop-Port, and the Nokia Original Enhancements logos are trademarks or registered trademarks of Nokia Corporation. Other company and product names mentioned herein may be trademarks or trade names of their respective owners.

Includes RSA BSAFE cryptographic or security protocol software from RSA Security.

Java is a trademark of Sun Microsystems, Inc.

The information contained in this user guide was written for the Nokia 2126 product. Nokia operates a policy of ongoing development. Nokia reserves the right to make changes to any of the products described in this document without prior notice.

UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED.

THE C ONTE NTS O F THIS DOCU MENT ARE P ROVID ED “A S IS. ” EXC EPT AS RE QUIR ED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED , INCLU DING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.

Export Controls

This device may contain commodities, technology, or software subject to export laws and regulations from the U.S. and other countries. Diversion contrary to law is prohibited.

FCC/Industry Canada Notice

Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.

Table of Contents

For your safety..................................................................................... 4

Welcome............................................................................................... 7

1. Phone at a glance.......................................................................... 9

2. Set up your phone....................................................................... 13

3. Text entry..................................................................................... 20

4. Manage your prepaid account ................................................... 22

5. Contacts list ................................................................................ 23

6. Messages...................................................................................... 29

7. Call log......................................................................................... 36

8. Profiles ......................................................................................... 38

9. Settings........................................................................................ 39

10. Gallery.......................................................................................... 50

11. Games........................................................................................... 51

12. Voice............................................................................................. 52

13. Organizer...................................................................................... 55

14. PC connectivity............................................................................ 61

15. Enhancements.............................................................................. 62

16. Battery information .................................................................... 63

Care and maintenance....................................................................... 66

Additional safety information .......................................................... 67

Index ................................................................................................... 72

For your safety

Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information.

SWITCH ON SAFELY

Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.

INTERFERENCE

All wireless phones may be susceptible to interference, which could affect performance.

SWITCH OFF IN HOSPITALS

Follow any restrictions. Switch the phone off near medical equipment.

SWITCH OFF IN AIRCRAFT

Follow any restrictions. Wireless devices can cause interference in aircraft.

SWITCH OFF WHEN REFUELING

Do not use the phone at a refueling point. Do not use near fuel or chemicals.

SWITCH OFF NEAR BLASTING

Follow any restrictions. Do not use the phone where blasting is in progress.

USE SENSIBLY

Use only in the normal position as explained in the product documentation. Do not touch the antenna unnecessarily.

QUALIFIED SERVICE

Only qualified personnel may install or repair this product.

ENHANCEMENTS AND BATTERIES

Use only approved enhancements and batteries. Do not connect incompatible products.

For your safety

WATER RESISTANCE

Your phone is not water-resistant. Keep it dry.

BACKUP COPIES

Remember to make back-up copies or keep a written record of all important information stored in your phone.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products.

EMERGENCY CALLS

Ensure the phone is switched on and in service. Press the end key as many times as needed to clear the display and return to the start screen. Enter the emergency number, then press the call key. Give your location. Do not end the call until given permission to do so.

■ About your device

The wireless phone described in this guide is approved for use on the CDMA 800 and 1900 networks. Contact your service provider for more information about networks.

When using the features in this device, obey all laws and respect privacy and legitimate rights of others.

Warning: To use any features in this device, other than the alarm clock, the phone must be switched on. Do not switch the device on when wireless phone use may cause interference or danger.

■ Network services

To use the phone you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These network services may not be available on all networks or you may have to make specific arrangements with your service provider before you can utilize network services. Your service provider may need to give you additional instructions for their use and explain what charges will apply. Some networks may have limitations that affect how you can use network services. For instance, some networks may not support all language-dependent characters and services.

Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Your device may also have been specially configured. This configuration may include changes in menu names, menu order and icons. Contact your service provider for more information.

For your safety

■ Shared memory

The following features in this device may share memory: contacts, text messages, images and tones in Gallery, calendar notes, and games. Use of one or more of these features may reduce the memory available for the remaining features sharing memory. Your phone may display a message that the memory is full when yo u t ry t o use a shar ed mem or y fe atur e. In t hi s ca se, de let e s ome of the info rmati on or entries stored in the shared memory features before continuing. Some of the features, such as images, tones in Gallery and text messages may have a certain amount of memory specially allotted to them in addition to the memory shared with other features.

Welcome

Congratulations on your purchase of the Nokia 2126 mobile phone. Your phone provides many functions that are practical for daily use, such as a hands-free loudspeaker, alarm clock, calculator, calendar. Your phone can also connect to a PC, laptop, or other device, using a data cable. To personalize your phone, you can set your favorite ring tones or select an Xpress-on™color cover.

■ Get help

Find your phone label

If you need help, the Nokia Care Contact Center is available for assistance. Before calling, we recommend that you write down the following information and have it available:

• Electronic serial number (ESN)

• Your zip code The ESN is found on the type label,

which is located beneath the battery on the back of the phone. See "Remove the back cover," p. 14 and "Remove the battery," p. 14.

Welcome

Contact Nokia

Please have your product with you when contacting either of the numbers below:

Nokia Care Contact Center, USA

Nokia Inc.

4630 Woodland Corporate Blvd. Suite #160 Tampa, Florida 33614 Tel: 1-888-NOKIA-2U

(1-888-665-4228) Fax: 1-813-249-9619 Web site: www.nokiausa.com/support

In Canada call:

Tel: 1-888-22-NOKIA

(1-888-226-6542) Web site: www.nokia.ca

For TTY/TDD users:

1-800-24-NOKIA (1-800-246-6542)

Updates

Check www.nokia.com/support or your local Nokia Web site for the latest version of this guide, additional information, downloads, and services related to your Nokia product.

On the Web site, you can get information on the use of Nokia products and services. If you need to contact customer service, check the list of local Nokia Care contact centers at www.nokia.com/customerservice

For maintenance services, check your nearest Nokia Care services location at

www.nokia.com/repair

Accessibility solutions

Nokia is committed to making mobile phones easy to use for all individuals, including those with disabilities. For more information visit the Web site at

www.nokiaaccessibility.com

1. Phone at a glance

• Power key and flashlight (1)

• Earpiece (2)

• Right selection key (3)

• End key (4)

• Keypad (5)

• Connection port (6)

• Microphone (7)

• Charger port (8)

• Scroll up and down key (9)

• Call key (10)

• Left selection key (11)

• Display screen (12)

Phone at a glance

■ The start screen

Depending on your wireless service provider and the model number of your device, some or all of the following selection keys may appear on the start screen.

The start screen is home base and indicates that your phone is in the standby mode.

Signal strength (1)—A higher bar indicates a stronger network signal. Battery level (2)—A higher bar indicates more charge in the battery.

Menu (3)—Press the left selection key to select this option. Contacts (4)—Press the right selection key to select this option.

■ Quick keys

In the standby mode, scroll down to access the contacts list, and select a contact. Press the call key to call the primary number of the contact.

Press the scroll up key to activate the flashlight momentarily. Press the scroll up key twice to switch the flashlight on continuously. Press the scroll up key again to switch off the flashlight.

■ Indicators and icons

Depending on your wireless service provider and the model number of your phone, some or all of the following indicators and icons may appear in the standby mode:

You have new text or picture messages. See "Text messages," p. 29. You have new voice messages. See "Voice messages," p. 33. Device keypad is locked. See "Keyguard," p. 19. Device is set to the silent profile. See "Profiles," p. 38. Alarm clock is set to on. See "Alarm clock," p. 55.

Countdown timer is running. See "Countdown timer," p. 59. Stopwatch timer running in the background. See "Stopwatch," p. 59.

Phone at a glance

Integrated hands-free is active. See "Use the loudspeaker," p. 18. Timed profile is selected. See "Profiles," p. 38.

or An enhancement is connected to the device.

See "Enhancements," p. 62.

Voice privacy encryption is active in the network. See "Security settings," 45.

You are roaming outside your home network. See "Roaming options," p. 47.

You are in a 1XRTT network. See "Network services," p. 5. You are in a digital network. See "Network services," p. 5. You are in an analog network. See "Network services," p. 5.

or Off hook, call or data call in progress.

■ Phone menus

Phone features are grouped according to function and are accessed through the main menus. Each main menu contains submenus and lists from which you can select or view items and customize your phone features. To access these menus and submenus use the scroll method or use a shortcut.

Some features may not be available, depending on your network. For more information, contact your wireless provider.

The scroll method

1. In the standby mode, select Menu, and scroll up or down through the main menus.

As you scroll through the menus, the menu number appears in the upper right corner of the display. Below the number is a scroll bar with a tab that moves up or down on the right side of the display screen as you scroll through the menus. This display provides a visual representation of your current position in the menu structure.

2. When you arrive at a menu, press the left selection key to enter submenus.

• Select Back (the right selection key) to return to the previous menu.

• Select the end key from any submenu or select Exit from the main menu

level to return to the standby mode.

Phone at a glance

Shortcuts

To go directly to almost any menu or submenu, as well as activate most features use a shortcut.

In the standby mode, select Menu; then within 3 seconds, press the key or keys associated with the menu function you would like to view or activate.

For example, to select the meeting profile, select Menu 3-3-1 from standby mode (Menu > 3 Profiles > 3 Meeting > 1 Activate). After a brief pause, the Meeting profile is activated.

In-phone help

Many features have brief descriptions (help text) that can be viewed on the display. In order to view the descriptions, you must first activate help text.

In the standby mode, select Menu > Settings > P hone settings > Help text

activation > On or Off.

To view these descriptions, scroll to a feature, and wait for about 15 seconds. Select More, when necessary, to view all of the description, or select Back to exit.

2. Set up your phone

■ Antenna

Your phone has an internal antenna that is located toward the top of the phone.

Hold the phone as you would any other telephone with the antenna area pointed up and over your shoulder.

Note: As with any other radio transmitting device, do not touch the antenna unnecessarily when the device is switched on. Contact with the antenna affects call quality and may cause the device to operate at a higher power level than otherwise needed. Avoiding contact with the antenna while operating the device optimizes the antenna performance and the battery life.

Set up your phone

■ Change the battery

Always switch the device off, and disconnect the charger before removing the battery.

Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous.

Check the model number of any charger before use with this device. This device is intended for use when supplied with power from the ACP-7 and ACP-12 chargers.

Set up your phone

For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.

Note: Always switch off the power and disconnect the charger and any other device before removing the cover. Avoid touching electronic components while changing the cover. Always store and use the device with the cover attached.

Remove the back cover

1. With the back of the phone facing you, push down on the back cover release button.

2. Slide the back cover toward the bottom of the phone and remove.

Remove the battery

After you have removed the back cover, insert your finger into the finger grip, and lift the battery from its compartment.

Replace the battery

1. Position the battery so the positive and negative indicators on the battery match up with the positive and negative indicators on the phone.

The battery label must face away from the phone.

2. Insert the batte ry, gold-colored c ontact end first, into the battery slot.

3. Push down on the other end of the battery to snap it into place.

Replace the back cover

Slide the back cover toward the top of the phone until the back cover is securely in place.

Charge the battery

1. Plug the charger into a standard ac outlet.

2. Insert the charger output plug into the round jack at the bottom end of the phone.

After a few seconds, the battery indicator on the display starts to scroll from bottom to top. If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made.

■ Turn your phone on or off

1. To turn your phone on or off, press and hold the power key on top of the phone for at least 3 seconds.

2. Enter the lock code. if necessary, and select OK. See "Security settings," p. 45.

Set up your phone

■ Connect the headset

A compatible headset, such as HS-5, may be purchased with your phone or separately as an enhancement. See "Enhancements," p. 62.

Warning: When using the headset, your ability to hear outsid e sounds may be affected. Do not use the headset where it can endanger your safety.

Important: The headset may affect your ability to hear sounds around you. Do not use this headset in situations that may endanger your safety.

Set up your phone

1. Plug the headset connector into the Pop-Port™ connector at the bottom end of your phone. appears in the standby mode.

2. Position the headset on your ear. With the headset connected, make, answer,

and end calls as usual.

• Use the keypad to enter numbers.

• Press the call key to place a call.

• Press the end key to end a call.

■ Change the Xpress-on™ covers

Note: Always switch off the power, and disconnect the charger and any

other device, before removing the cover. Do not touch electronic components while changing the covers. Always store and use the device with the covers attached.

To change the Xpress-on covers, first remove the back cover and battery.

Remove the front cover

Gently pull the bottom of the front cover away from the rest of the phone.

Install the keymat and front cover

1. Remove the keymat from the old front cover.

Set up your phone

2. Place the keymat into the new front cover.

3. Press the front cover and keymat against the phone, and snap the front cover into place.

4. Replace the battery and back cover.

■ Make a call

Use the keypad

1. Enter the phone number (including the area code), and press the call key. To delete a character to the left of the cursor, select Clear.

2. Press the end key to end the call, or select End call to cancel the call attempt.

Use the contacts list

1. In the standby mode, scroll down to the entry you wish to view.

2. Press the call key to make the call, or select Details to view details of the entry.

Use the last dialed number

1. In the standby mode, press the call key to display the last 10 numbers dialed.

2. Scroll to the number (or name) you wish to redial, and press the call key.

Set up your phone

■ Answer calls

Answer, silence, or decline an incoming call

Silence and Decline are carrier dependent features.

1. Press the call key to answer the call.

2. To mute the ringing tone, select Silence. If you do not answer the call, the call is forwarded to voicemail.

3. To dismiss and forward the call to voicemail (a carrier dependent feature), select Decline after you have muted the ringing tone, or press the end key at any time.

Answer a call with the keypad locked

To answer a call with the keypad locked, press the call key. During the call, all features function normally. When you end, silence or decline the call, the keypad automatically relocks. See "Keyguard," p. 19.

When the keyguard is on, calls still may be possible to the official emergency number programed into your device.

Adjust the earpiece volume

While in a call, scroll up or down to adjust the volume of the earpiece. When you adjust the volume, a bar chart appears in the display to indicate the

volume level.

Use the loudspeaker

You can use your phone as a loudspeaker during a call.

• To activate the loudspeaker, select Loudspeaker.

• To deactivate the loudspeaker during a call, select Handset.

The loudspeaker is deactivated automatically when a call (or a call attempt) ends, or when certain enhancements are connected.

Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.

Set up your phone

Options during a call

Many of the options used during a call are network services. Check with your wireless service provider for more information.

1. Select Options to display the following:

Mute or Unmute—Silence your end of the call. Loudspeaker or Handset—Activate or deactivate the loudspeaker while in a call. End all calls—Disconnect from all active calls. Touch tones—Enter the numbers, and select Tones t o send th e num bers as t ones . Contacts—View the contacts list. Menu—View the phone menu.

2. Select an option to activate the option or enter its submenu.

■ Keyguard

Use keyguard, to lock the keypad and prevent keys from being pressed accidentally. Remember to lock your phone keypad to prevent accidental calls. If the keypad is locked, it unlocks when you receive a call. After the call, the lock automatically reactivates.

When the keyguard is on, calls still may be possible to the official emergency number programed into your phone. Enter the emergency number, and press the call key. See "Automatic keyguard," p. 41.

Lock the keypad

Select Menu; then press * within 2 seconds.

Unlock the keypad

Select Unlock; then press * within 2 seconds.

Text entry

3. Text entry

You can use two methods for entering text and numbers: standard mode and predictive text mode.

•Select Clear to backspace the cursor and delete a character.

•Select and hold Clear to backspace continuously and delete characters.

■ Standard mode

Standard mode is the only way to enter text into the contacts list and to rename caller groups.

Text (Abc)

Press a key once to insert the first letter on the key and twice for the second letter, etc. If you pause briefly, the last letter in the display is accepted and your device awaits the next entry.

• Press 0 to enter a space and accept a completed word.

• Press 1 to insert a period into your message.

• Press and hold * to display a complete list of special characters.

• Press and hold # to switch between letters and numbers.

Numbers (123)

To switch from Abc mode to 123 mode, press and hold # at any message entry screen.

Punctuation and special characters

While at any text entry screen, press * to display special characters (press and hold * if predictive text is on). Press * again to cycle through all available characters. To navigate through the list of special characters, use the scroll keys. Once a character is highlighted, select Insert to insert the character into your message.

■ Predictive text mode

To write messages quickly, use predictive text mode with your keypad and the built-in dictionary. Predictive text mode is much faster than the standard mode method because you do not need to scroll through the letters on each key to spell a word. The dictionary determines which word to enter based on the keys selected.

Text entry

Activate or deactivate

At any text entry screen, select Options > Predictive text > English, Français, or Español to activate predictive text; or select Prediction off to deactivate predictive text.

Text entry

The illustration below simulates your display each time a key is pressed. For example, to write ’Nokia’ with predictive text on and the English dictionary selected, press each of the following keys:

6 6 5 4 2

• Press 0 to enter a space, and begin writing the next word.

• If a displayed word is not correct, press * to see other matches. To return to

the previous word in the list of matches, select Previous.

•If ? appears after a word, select Spell to enter the word with the standard

mode, and add the word to the dictionary.

• Press 1 to insert a period into your message.

• Press and hold * to display special characters. Press * again to cycle through

all available characters.

■ Change case and mode

Press # to switch between uppercase, lowercase, and sentence case text and between standard and predictive text mode. Case and mode are indicated by the icons that appear in the upper left of the display screen, as follows:

Uppercase text: standard mode is on. Lowercase text: standard mode is on.

Sentence case text: standard mode is on. This option is available only at the beginning of a sentence.

Uppercase text: predictive text is on. Lowercase text: predictive text is on. Sentence case text: predictive text is on. This option is available

only at the beginning of a sentence.

Manage your prepaid account

4. Manage your prepaid account

To reactivate your prepaid service, add prepaid time to your account, and check the remaining prepaid time available, use the Prepaid menu. Contact your TracFone Wireless Call Centre to obtain the necessary codes.

■ Enter prepaid codes

Enter the prepaid codes you obtain from the TracFone Wireless Call Centre.

1. In the standby mode, select Menu > Prepaid > Code entry mode.

2. Enter one code, and select OK. The phone displays Code accepted. Select OK again.

3. Similarly enter the next code, if any.

4. Only after the last code is accepted, press the end Exit key. The phone restarts and returns to the standby mode.

If the entered code is invalid, the phone displays Invalid code. Try the code again. If the code is still invalid, contact your TracFone Wireless Call Centre for help.

■ Check airtime tank

You can check the time remaining in your airtime tank and enable or disable the the airtime tank display.

View airtime remaining

If the airtime tank display is enabled, the quantity of units remaining is displayed on the idle screen. If not, in the standby mode, select Menu > Prepaid > Airtime

tank info. The phone displays the number of Units remaining and the Due date.

Enable the airtime tank display

In the standby mode, select Menu > Prepaid > Airtime tank info di splay > On or Off.

View my phone number

You can view your own phone number. In the standby mode, select Menu >

Prepaid > My number.

Contacts list

5. Contacts list

The contacts list can hold up to 250 contacts with multiple numbers and text notes for each contact. The amount of numbers and text entries that you can save may vary, depending on length and the total number of entries in the contacts list.

■ Search

In the standby mode, select Contacts > Search; highlight the contact you wish to view, and select Details.

■ Add new contacts

Save a name and number

1. In the standby mode, enter the phone number you wish to save.

2. Select Options > Save.

3. Enter the contact name, and select OK.

Save (only) a number

In the standby mode, enter the phone number you wish to save; select and hold Options.

Save multiple numbers and text items

The first number you save for any entry is automatically set as the default. The default setting can be changed later. To save different types of phone numbers and short text items per name to the phone memory, do the following:

1. In the standby mode, scroll down to display a list of entries. Scroll to the entry to which you wish to add a phone number or text item.

2. Select Details > Options > Add number to add a General, Mobile, Home, Work, or

Fax number; or Add detail to add an E-mail, Web address, Street addr., or Note.

3. Enter the number or text for the type you have selected, and select OK.

4. To change the type select Change type > E-mail, Web address, Street addr.

Contacts list

To change which phone number is the default number for the contact entry:

1. In the standby mode, scroll down to the entry you wish to change, and select Details.

2. Scroll to the number you wish to set as default, select Options > As primary no.

Set up voice tags

For more information on setting up voice tags and other voice features, see "Voice tags," p. 53.

Caller groups

You can add contact list entries to any of five caller groups, and assign a unique ringing tone or graphic to that group. This enables you to identify callers from the group by their unique ringing tone or graphic.

Set up a caller group

1. In the standby mode, scroll down to display a list of entries in your contacts list.

2. Scroll to a name you want to add to a caller group, and select Details.

3. Select Options > Caller groups.

4. Select the caller group to which you would like to add the name.

Options

1. In the standby mode, select Contacts > Caller groups > Family, VIP, Friends,

Business, or Other.

2. Select from following caller group options:

Rename group—Rename the group to your preference. Group ringing tone—Set the ringing tone for the group. Group logo—Turn the graphic for the caller group on or off or view the graphic. Group members—Add or remove members from the caller group.

Set up 1-touch dialing

You can associate any entry in the contacts list with a key from 2–9; to dial those entries, press and hold the assigned key. See "1-touch dialing," p. 39 to activate or deactivate 1-touch dialing.

Contacts list

Assign a key to 1-touch dialing

1. In the standby mode, select Contacts > 1-touch dialing. If 1-touch dialing is off, the phone displays a prompt asking if you want to

turn 1-touch dialing on. Select Yes to activate 1-touch dialing

2. Scroll to an (empty) 1-touch dialing slot, and select Assign.

3. Enter the number (including the area code) and a name for the contact, or select Search to retrieve a number from the contacts list.

4. Select OK.

Change 1-touch dialing numbers

1. In the standby mode, select Contacts > 1-touch dialing.

2. Scroll to the 1-touch dialing entry you wish to change, and select

Options > Change.

3. Enter the new number; or search to retrieve a number from the contacts list, and select OK.

4. Enter a name for the entry, and select OK.

Delete 1-touch dialing numbers

1. In the standby mode, select Contacts > 1-touch dialing.

2. Scroll to the 1-touch dialing location you wish to delete, and select Options.

3. Select Delete > OK.

■ Edit contacts list entries

1. In the standby mode, scroll down to display the contents of your contacts list.

2. Scroll to the entry you would like to edit; select Details and one of the following options:

Add voice tag or Voic e tag—Add a new voice tag or Playback, Change, or Delete an existing voice tag.

Edit number—Edit an existing contact number. Delete number—Delete a phone number from the contact. Use number—Display the phone number in the standby mode, ready to be called. View—View the details of the contact. Change type—Change the number type to General, Mobile, Home, Work,

or Fax.

Contacts list

As primary no.—Change the default number of the contact. Add number—Add a number to the contact. Add detail > E-mail, Web address, Street addr., or Note—Add an address or

note to the contact.

Caller groups—Add the contact to an existing caller group. Custom ton e—Add a custom ringing tone to the contact. Send bus. card—Send the contact as a business card to another phone. Send message—Create and send a message to the contact. 1-touch dialing—Add the contact to your speed dial list. Edit name —Edit the name of the contact. View name—View the name of the contact. Delete—Delete the entire contact entry from your contacts list.

Edit phone number

Highlight the existing phone number you would like to edit, and select Options >

Edit number.

E-mail address entry

Highlight the existing e-mail address entry you would like to send or update, and select Options and one of the following:

Send e-mail—Send an e-mail. Edit detail—Edit e-mail details. Delete detail—Delete e-mail. View—View the details of the e-mail contact. Change type—Change the e-mail type to E-mail, Web address, Street addr., or Note. Add detail—Add an E-mail, Web address, Street addr., or Note to the entry. Add number—Add a number to the entry. Caller groups—Add the e-mail to an existing caller group. Custom tone—Add a custom ring tone to the contact. Send bus. card—Send the contact a business card. Edit name—Edit the name of the contact. View name—View the name of the contact. Delete—Delete the entire e-mail entry from your contacts list.

Contacts list

Edit Web address

Highlight the Web address entry you want to edit, and select Options. > Web

address, Street addr., or Note > OK.

■ Delete contacts list entries

In the standby mode, select Contacts > Delete.

• To delete individual entries, select One by one, and scroll to the entry you wish to delete. Select Delete > OK to confirm.

• To delete the entire contents of your contacts list, select Delete all > OK. Select OK to confirm or Back to return to Contacts. If OK, enter the security code, and select OK. See "Security settings," p. 45.

■ View the contacts list

1. In the standby mode, select Contacts and one of the following options:

Search—Find a name or select from a list. Add new—Add a contact to your contacts list. Edit name—Edit an existing name. Delete—Delete a name and its associated numbers. Add number—Add a number to an existing name. Settings—Change the contacts list view, check the memory status of your phone. 1-touch dialing—View or modify the list of 1-touch dialing numbers. Voice tags—Attach, listen to, or modify a contact voice tag. My number—View your own phone number. Caller groups—View and edit the properties for any of the caller groups:

Family, VIP, Friends, Business, or Other.

2. Select an item to activate the feature or enter its submenu.

Fast search for a name

1. In the standby mode, scroll down to display your contacts list.

2. Press the key that corresponds to the first letter of the name for which you are performing a search.

3. Scroll up and down to highlight a contact, and select Details to view the details.

Contacts list

Configure settings

You can choose how the contacts appear in your contacts list and view the amount of memory used or available in your phone.

For more information on used and available memory, see "Shared memory," p. 6. In the standby mode, select Contacts > Settings, and one of the following options:

Scrolling view > Name list or Name and no .—Choose how names and numbers

stored in the contacts list are viewed.

Memory status—View the amount of memory used in phone book.

■ Send and receive contacts

To send and receive an entry in your contacts list, use text messaging, if supported by your wireless provider.

Send a business card

To send a business card as a text message to a compatible phone or other handheld device, do the following:

1. Highlight the entry from the contacts list that you wish to send, and select

Details > Options > Send bus. card > Via text msg., and do one of the following:

•Select Primary no. or All details, if the entry has more than one number or detail.

• Enter the number for your recipient.

•Select Search to retrieve a number from your contacts list.

2. Select OK, to send the business card.

Messages

6. Messages

If you have subscribed to a messaging service through your wireless provider, you can send and receive text messages to compatible phones that also subscribe to a compatible message service. You may also be able to send and receive picture messages and e-mail messages.

Important: Exercise caution when opening messages. E-mail messages may contain malicious software or otherwise be harmful to your device or PC.

Your device supports the sending of text messages beyond the 160 character limit for a single message. Longer messages will be sent as a series of two or more messages. Your service provider may charge accordingly. Characters that use accents or other marks, and characters from some language options like Chinese, take up more spac e, limiti ng the n umbe r of c haracters that can b e sent i n a sing le me ssage.

The number of characters remaining in a message are indicated by counter in upper right corner of screen. If there are special characters in your message, the indicator may not show the message length correctly.

Note: When sending messages, your device may display M essage sent. This i s an i ndic ation th at th e messag e has been sen t by y our d evice to the message center number programed into your device. This is not an indication that the message has been received at the intended destination. For more details about messaging services, check with your service provider.

■ Text messages

Write and send

1. In the standby mode, select Menu > Messages > Text messages > Create

message and one of the following: Text to send an alphanumeric text message > Add number, Add e-mail, Edit

message, List recipients, or Send to send a text message.

2. Select Add number or Add e-mail to enter the recipient’s phone number or e-mail address or Search to retrieve a number from your contacts list.

Select OK.

3. Repeat step 2 to add more recipients, and select OK.

4. Select Options > Edit message.

5. Compose a message using the keypad, and select Options > Send.

+ 123 hidden pages