Nissan MAXIMA-2007, MURANO-2007, TITAN-2007, Z COUPE 2007, PATHFINDER 2007 USER Manual
...
FOREWORD
Thank you for purchasing a NISSAN vehicle.
This user’s manual is for the navigation system
only. This manual contains operating instructions
for the NISSAN Navigation System offered in
your NISSAN vehicle.
Please read this manual carefully to ensure safe
operation of the navigation system.
. Because of possible specification changes
and optional equipment, sections of this
manual may not apply to your vehicle.
. All information, specifications and illustra-
tions in this manual are those in effect at the
time of printing. NISSAN reserves the right
to change specifications or design at any
time without notice.
. Do not remove this manual from the vehicle
when selling this vehicle. The next user of
this navigation system may need the manual.
Table of
Introduction
1
Contents
Getting started
Map settings
Setting a destination
Route guidance
Storing a location/route
Viewing technical information
Other settings
General system information
Troubleshooting guide
Index
2
3
4
5
6
7
8
9
10
11
1 Introduction
How to use this manual .......................................1-2
For safe operation .............................................. 1-2
Reference symbols ......................................... 1-2
Safety information .............................................. 1-3
Laser product.................................................... 1-4
HOW TO USE THIS MANUAL FOR SAFE OPERATION
This manual uses special words, symbols and
icons, organized by function.
Please refer to the following items and familiarize
yourself with them.
Basic operations of the navigation system can
be performed in a similar manner for all vehicle
models. However, the map screen and setting
screen may be different for each model. Set the
navigation system as appropriate for your
vehicle.
WARNING
This is used to indicate the presence of a
hazard that could cause death or serious
personal injury. To avoid or reduce the
risk, the procedures must be followed
precisely.
CAUTION
This is used to indicate the presence of a
hazard that could cause minor or moderate personal injury or damage to your
vehicle. To avoid or reduce the risk, the
procedures must be followed carefully.
NOTE:
This indicates an item to help you understand and maximize the performance of
your vehicle. If ignored, it may lead to a
malfunction or poor performance.
REFERENCE SYMBOLS
INFO:
This indicates information that is necessary for
efficient use of your vehicle or accessories.
Reference page:
This indicates the title and page that you should
refer to.
<>:
This indicates a button on the control panel.
[]:
This indicates a key/item displayed on the
screen.
1-2 Introduction
SAFETY INFORMATION
This system is primarily designed to help you
reach your destination, and it also performs
other functions as outlined in this manual.
However, you, the driver, must use the system
safely and properly. Information concerning road
conditions, traffic signs and the availability of
services may not always be up-to-date. The
system is not a substitute for safe, proper and
legal driving.
Before using the navigation system, please read
the following safety information. Always use the
system as outlined in this manual.
WARNING
. When the driver wants to operate the
navigation system, first park the vehicle in a safe location and set the
parking brake. Operating the system
while driving can distract the driver
and may result in a serious accident.
. Do not rely on route guidance alone.
Always be sure that all driving maneuvers are legal and safe in order to
avoid accidents.
. Do not disassemble or modify this
system. If you do, it may result in
accidents, fire or electrical shock.
. Do not use this system if you notice
any malfunctions such as a frozen
screen or the lack of sound. Continued
use of the system may result in
accidents, fire or electrical shock.
. If you notice any foreign objects in the
system hardware, spill liquid on the
system or notice smoke or a smell
coming from it, stop using the system
immediately and contact a NISSAN
dealer. Ignoring such conditions may
lead to accidents, fire or electrical
shock.
CAUTION
. Do not keep the navigation system
running with the engine stopped.
Doing so may discharge the vehicle
battery. When you use the navigation
system, always keep the engine running.
. Some states/provinces may have laws
limiting the use of video screens while
driving. Use this system only where it
is legal to do so.
Introduction 1-3
LASER PRODUCT
This navigation system is certified as a Class 1
laser product.
The navigation system complies with DHHS
Rules 21 CFR Chapter 1, Subchapter J.
WARNING
. Do not disassemble or modify this
system. There are no user serviceable
parts in this navigation system.
. If maintenance, adjustments and op-
erations other than those specified in
this manual are attempted, injury due
to laser radiation and exposure could
occur.
1-4 Introduction
2 Getting started
Control buttons and functions ............................... 2-2
Control panel ................................................ 2-3
Start-up screen ................................................. 2-6
Menu screen types and how to operate................... 2-7
Menu screens and their purposes ...................... 2-7
Using controls to adjust values, levels, etc............ 2-9
Map menu screen ........................................ 2-10
Functions disabled while driving .......................... 2-13
Operating maps............................................... 2-14
How to view map screen ............................... 2-14
Map screen types ........................................ 2-15
Switching map view...................................... 2-16
Moving around within a map ........................... 2-18
Changing the scale of a map .......................... 2-19
Storing your home location/address...................... 2-20
How to store your home ................................ 2-20
Character (letter and number) input screen ........ 2-23
Phone number input screen ............................ 2-25
List screen ................................................. 2-27
Setting a destination ......................................... 2-28
Searching for a destination............................. 2-28
Starting route guidance ................................. 2-31
Deleting a route........................................... 2-33
Setting the voice guidance ................................. 2-35
Turning voice guidance on/off ......................... 2-35
Adjusting voice guidance volume ..................... 2-37
CONTROL BUTTONS AND
FUNCTIONS
NAI0479
2-2 Getting started
CONTROL PANEL
Armada, Maxima, Murano, Pathfinder,
Quest, Titan
1
&
< > (DAY/NIGHT):
Push to switch between the day screen and
the night screen.
2
&
<BACK>/<PREV>:
Push to return to the previous screen. In a
settings screen, this button can also be
used to apply the setting.
3
&
JOYSTICK and <ENTER>:
Move to highlight an item on the screen, or
move on the map, etc. Then push to select
the highlighted item.
4
&
<SETTING>:
Push to access the system settings.
NAI0402
5
&
<TRIP>:
Push to display the trip computer. Refer to
the Owner’s Manual of your vehicle.
6
&
<DEST>:
Push to enter a destination. Various methods
for entering a destination are available.
“4. Setting a destination”.
7
&
<ROUTE>:
Push to access guidance control functions
(guidance cancellation, route priority, waypoint setting on the route, etc.).
8
&
<MAP>:
Push to display the current location map
screen.
9
&
<GUIDE VOICE>:
Push to repeat voice guidance for a guide
point.
10
&
< > (ZOOM IN/ZOOM OUT):
Push to switch to the zoom mode to change
the map scale.
Getting started 2-3
350Z
1
&
<MAP>:
Push to display the current location map
screen.
2
&
<DEST>:
Push to enter a destination. Various methods
for entering a destination are available.
“4. Setting a destination”.
3
&
<ROUTE>:
Push to access guidance control functions
(guidance cancellation, route priority, waypoint setting on the route, etc.).
4
&
JOYSTICK and <ENTER>:
Move to highlight an item on the screen, or
move on the map, etc. Then push to select
the highlighted item.
NAI0403
5
&
<INFO>:
Push to display the navigation information,
such as GPS and version information, etc.
6
&
<SETTING>:
Push to access the system settings.
7
&
<VOICE>:
Push to repeat voice guidance for a guide
point.
8
&
<ZOOM IN>/<ZOOM OUT>:
Push to switch to the zoom mode to change
the map scale.
9
&
<BACK>:
Push to return to the previous screen. In a
settings screen, this button can also be
used to apply the setting.
10
&
< > (DAY/NIGHT):
Push to switch between the day screen and
the night screen. Push and hold to toggle
the display on and off.
2-4 Getting started
11
&
<CANCEL>:
Push to return to the map screen or cancel
the route that has already been set.
Getting started 2-5
START-UP SCREEN
NAV2701
1. The navigation system starts wh en the
ignition switch is turned to the ACC or ON
position.
2-6 Getting started
Armada, Maxima, Murano, Pathfinder, Quest, Titan
NAV2702
2. As the start-up screen is displayed, read the
precautions carefully, hig hlight [OK] and
push <ENTER>.
350Z
NAV3022
INFO:
If you do not push <ENTER> for more than 30
seconds, the status screen will be displayed.
Push <DEST>, <MAP>, <ROUTE>,
<INFO>, <SETTING> or <TRIP> to return
to the start-up screen.
MENU SCREEN TYPES AND HOW
TO OPERATE
MENU SCREENS AND THEIR PURPOSES
Push <DEST>, <ROUTE>, <TRIP>, <INFO>
or <SETTING> to display the corresponding
menu screen.
How to select a menu item
Example: <DEST> screen
1. Tilt the joystick up and down. An item is
highlighted accordingly.
2. To select the preferred menu item, highlight
the item and push <ENTER>.
INFO:
Some items in the menu contain further
details, which are displayed on the right side
of the screen when the menu item is
highlighted. This allows you to preview
details of the item. These details appear
only on the menu screen displayed by
pushing <DEST>.
NAI0406
Getting started 2-7
NAV3061
3. Depending on the item you selected, a
detailed menu screen, a character input
screen or a setting screen, etc. is displayed.
On the screen displayed, make adjustments,
input information, etc. accordingly.
2-8 Getting started
NAV2704
4. Push <BACK>/<PREV> to return to the
previous screen without applying any
changes.
Push <MAP> to return to the current
location map screen without applying any
changes.
INFO:
Depending on the menu selected, pushing
<MAP> may not return you to the current
location map screen.
NAI0407
USING CONTROLS TO ADJUST VALUES, LEVELS, ETC.
Use the joystick to adjust the volume of the voice
guidance and the display brightness.
How to adjust
1. Highlight the preferred setting item and
push <ENTER>. The color of the corresponding adjustment item changes.
2. Use the joystick, and the value or bar
indicating levels increases or decreases
accordingly.
3. Push <ENTER> or <BACK>/<PREV> to
apply the setting.
Getting started 2-9
MAP MENU SCREEN
Push <ENTER> while the current location map
screen or a scrolled map screen is displayed to
display the menu corresponding to that screen.
This menu allows you to quickly use helpful
functions, such as setting a destination easily
and searching for facilities nearby.
To select a menu item, use the method
described in “Menu screen types and how to
operate”.
NAV2705
Current location map screen
If <ENTER> is pushed while the current
location map screen is displayed, the following
options are available.
. Store Location:
Allows you to store the current vehicle
location in the Address Book. The stored
location can be retrieved as necessary to set
it as a destination (waypoint).
“STORING A LOCATION” (page 6-2)
. Nearby:
Allows you to search for points of interest
near the current vehicle location, such as
restaurants and gas stations, etc.
“SETTING A NEARBY PLACE”
(page 4-47)
. Map View:
Switches the map type. It is used to switch
between Plan View and Birdview
TM
the left screen display.
“SWITCHING THE MAP VIEW”
(page 3-4)
. Heading:
Switches the orientation of the map. “North
Up” or “Heading Up” are the available
options.
“SETTINGS OF HEADING/LONG
RANGE MAP VIEW” (page 3-15)
. Landmark Icons:
Allows you to display certain points of
interest near the current vehicle location on
the map, such as restaurants and gas
stations, etc.
“DISPLAYING LANDMARK ICONS”
(page 3-22)
and set
2-10 Getting started
. Store Tracking:
Allows you to store in the Address Book the
route that you have travelled from the
starting point to the current location.
“STORING A TRACKED ROUTE”
(page 6-14)
Getting started 2-11
Scrolled location map screen
If <ENTER> is pushed while a scrolled map
screen is displayed, the following options are
available.
. New Dest:
Allows you to set the destination to the
location where you pushed <ENTER>.Ifa
destination is already set, the location will be
set as the new destination.
“SETTING FROM MAP” (page 4-20)
NAV2706
. Add to Route:
Allows you to set the location where you
pushed <ENTER> as the destination or a
waypoint.
This is available only when the suggested
route is already set.
“Setting a destination or waypoint”
(page 5-20)
. Nearby:
Allows you to search for points of interest
near the location where you pushed
<ENTER> and set it as a destination or
waypoint.
Use the same search method as the one for
POI.
“SETTING A NEARBY PLACE”
(page 4-47)
. Store Location:
Allows you to store the location where you
pushed <ENTER> in the Address Book.
The stored location can be retrieved to set it
as a destination or waypoint.
“STORING A LOCATION” (page 6-2)
. Delete:
Allows you to delete a stored location,
destination or waypoint. To delete it, place
the cross pointer over the corresponding
icon.
2-12 Getting started
FUNCTIONS DISABLED WHILE
DRIVING
To ensure safe driving, some functions cannot
be operated while driving.
The on-screen functions that are not available
while driving will be “grayed-out” or muted.
Park the vehicle in a safe location and then
operate the navigation system.
NAV2707
Getting started 2-13
OPERATING MAPS
HOW TO VIEW MAP SCREEN
The navigation system displays various information on the map screen.
Screen information
1
&
2
&
2-14 Getting started
Vehicle icon:
Indicates the current vehicle location and
the direction that you are traveling.
Guide point:
Indicates a guide point on the route.
3
&
4
&
GPS indicator:
Indicates the GPS reception condition of
signals from the satellites.
*
Green: positioning is possible
*
Gray: positioning is not possible
Remaining time and distance to the
destination:
Indicates the remaining time and distance to
the destination.
NAV2708
5
&
Suggested route:
Appears in bold yellow during route gui-
dance.
6
&
7
&
8
&
. Roads with a width of 10 ft (3 m) or less may
. The system may require a long time for
/ Direction indicator:
Indicates the direction of the map.
Scale indicator:
Indicates the scale of the map.
Arrow and distance:
Appears on the upper left corner of the
screen when the suggested route is set.
Indicates the distance to the next guide
point and the turning direction at that guide
point. This function can be turned on or off.
INFO:
not be displayed on the map.
positioning. The GPS indicator may remain
gray for 3 to 4 minutes after the system is
started. This is not a malfunction.
MAP SCREEN TYPES
Two types of map views are available: Plan View
and Birdview
TM
.
NAV2709
Plan View
Plan View displays the map in a 2-dimensional
environment similar to a road map.
NAV2710
Birdview
BirdviewTMdisplays the view from an elevated
perspective. In Birdview
TM
TM
, it is easy to recognize an image of the route because it provides a
panoramic view over a long distance.
Getting started 2-15
NAV2711
SWITCHING MAP VIEW
1. Push <ENTER> while the current location
map screen is displayed.
2-16 Getting started
NAV2712
2. Highlight [Map View] and push <ENTER>.
NAV2713
3. Highlight the preferred map view and push
<ENTER>. The indicator of the selected
map view illuminates.
“SWITCHING THE MAP VIEW”
(page 3-4)
4. Push <MAP> to return to the current
location map screen.
INFO:
. When you select a map view, a preview of
that view is displayed on the right side of the
screen.
. You can also switch the map view using the
following procedure.
1) Push <SETTING>.
2) Highlight [Navigation] and push
<ENTER>.
3) Highlight [Map View] and push
<ENTER>.
Getting started 2-17
NAI0408
MOVING AROUND WITHIN A MAP
You can manually move across the map to view
the surrounding areas or a preferred location.
1. Tilt the joystick corresponding to the direction that you want to move across the map.
Keep tilting the joystick to continuously
move across the map in that direction. Once
you start moving on the map, the cross
pointer appears.
2. Returning to the current location map screen
Push <MAP> or <BACK>/<PREV> to
return to the current location map screen,
and the cross pointer disappears.
2-18 Getting started
NAI0409
CHANGING THE SCALE OF A MAP
Push <ZOOM IN> ( )or<ZOOM OUT>
(
). A scale appears on the left side of the
screen.
To view the map in detail, push <ZOOM IN>
(
).
To view a wider area, push <ZOOM OUT>
(
).
The scale will automatically disappear when
neither <ZOOM IN> (
OUT> (
) has been pushed for several
seconds.
INFO:
Free zoom
Push and hold <ZOOM IN> (
OUT> (
) to change the map scale in
smaller steps (free zoom). Once the free zoom
has been utilized, push <ZOOM IN> (
<ZOOM OUT> (
) to change the map scale
in smaller steps.
)nor<ZOOM
)or<ZOOM
)or
Getting started 2-19
STORING YOUR HOME LOCATION/
ADDRESS
HOW TO STORE YOUR HOME
If your home location is already stored in the
Address Book, it can be easily retrieved to set
the route to your home.
The procedure to store your home location is the
same as for storing any other location.
“4. Setting a destination”
As an example, the procedure for storing your
home location by searching for a destination by
address is described here.
1. Push <DEST>.
NAI0410
NAV2714
2. Highlight [Address Book] and push
<ENTER>.
2-20 Getting started
NAV2715
3. Highlight [Home Location (Add New)] and
push <ENTER>.
NAV3023
4. A confirmation message is displayed. Confirm the contents of the message, highlight
[Yes] and push <ENTER>.
NAV3048
5. Highlight [Street Address] and push
<ENTER>. A character input screen is
displayed.
Getting started 2-21
NAV3062
6. Enter the address of your home, highlight
[OK] and push <ENTER>.
The map screen is displayed.
“SETTING A STREET ADDRESS”
(page 4-5)
2-22 Getting started
NAV3050
7. Using the joystick, adjust your home location
if necessary.
8. After adjusting the location, push
<ENTER>.
NAV3051
9. A message is displayed and your home
location is stored.
10. Pu sh <MAP> to return to the current
location map screen.
The home icon is displayed on the map.
INFO:
You can also perform the same setting by
pushing <SETTING> and selecting [Navigation].
“STORING A LOCATION BY SEARCHING” (page 6-2)
CHARACTER (letter and number) INPUT
SCREEN
You will have to enter alphanumeric characters
when setting a destination, searching for a
facility or editing the stored locations, etc.
NAV3063
1. Use the joystick to highlight a character on
the displayed keyboard.
NAV3064
2. Push <ENTER>. The highlighted character
is entered.
Getting started 2-23
NAV3065
3. Push <BACK>/<PREV>, or highlight
[
] and push <ENTER> to delete the
last character entered.
Push and hold <BACK>/<PREV> to
delete all the characters entered.
Push [
] to enter a space.
2-24 Getting started
NAV3066
4. After finishing the entry, highlight [OK] and
push <ENTER>.
INFO:
You can push <BACK>/<PREV> to return
to the previous scr een, but only after
deleting all the characters entered.
Loading...